Differences between legend in png and pdf output
Hello,
i noticed that there is a difference in the legend output of a transparent color style between a png and a pdf output in MapViewer version Ver11_B071001.
Lets say i have a sytle with 50% opacity like this:
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc/>
<g class="color" style="stroke:#00CC00;stroke-width:2.0;fill:#00CC00;fill-opacity:127">
<rect width="50" height="50"/>
</g>
</svg>If the mapresponse is a png, the style is displayed correct in the legend (with 50% opacity).
In the pdf output the opacity looks like 100%, so no transparency at all.
The actuall displayed geometries are displayed with the correct opacity, but not in the legend.
Is there a workaround for this behavior?
Thanks for help in advance,
Dirk
Hi Dirk,
transparency is not yet supported in all cases for the PDF graphics.
Joao
Similar Messages
-
Difference between KP06 upload figures and S_ALR_87013611 output
HI,
I am using KP06 for uploading planned cost in BUD version . I entered amount 1000 . And when I see in
S_ALR_87013611, the figure comes up as 4.92 . There is no mention of currency anywhere in KP06 or
S_ALR_87013611 . Can you please tell me , if this is happening because of currency variations, and in that case, where
I can see the currencies for Kp06 and S_ALR_87013611 .
Regards
RudraHi Rudra
1. It seems your Contr Area currency is different than Comp Code currency
2. Use RPC0 and choose Company code currency / Obj Currency... (Tab Report Currency)
3. While uploading In KP06 - You would have chosen a layout which uploads the values in Contr Area currency...
If you wish, you can create a layout in KP64/Kp65 which uploads the values in Object currency i.e. comp code currency
4. Also check the Exch rate type and Value date in version BUD....
br, Ajay M -
Differences between the alv's and alv grid dispaly
hi guys
.........please send the differences between the alv's and alv grid display.
thanks....Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan -
What's the difference between a web site and a web application?
I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them....can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...? -
What are differences between the target tablespace and the source tablespac
The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
Why create so many errors?
How to avoid these errors?
What are differences between the target tablespace and the source tablespace?
Is this datapump action really successfull?
Thw following is the log output:
[oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
. . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
. . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
. . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
. . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
. . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
. . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
. . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
. . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
. . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
Processing object type TABLE_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/TRIGGER
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
Justin -
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
Difference between Acrobat 9 Pro and Acrobat X?
Hi, can someone let me know the difference between Acrobat 9 Pro and Acrobat X? Thanks in advance.
This chart is a helpful comparison of new features in Acrobat 8, 9 and X:
http://blogs.adobe.com/acrolaw/files/2011/04/Acrobat8-9-XNewFeatureHistory.pdf
Keep in mind that the current version is Acrobat XI:
http://www.adobe.com/products/acrobatpro/features.html -
Cost difference between PM report MCI8 and IW38 orders cost
Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
MCI8 IW38
Total costs 8.041,69 5.544,99
of WOs 18 18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
SanthamoorthyHello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen -
Difference between Business Objects Explorer and Polestar
Hi all,
can anyone help me out with the main differences between Business Objects Explorer and Polestar.
thanks & regards
immanuel.Explorer is the new product name for Polestar. There have been a few versions of Explorer released since it was called Polestar, but you can find the latest 'whats new' doc here which lists the latest additions:
http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp32_whats-new_en.pdf
For one, Explorer now comes in two editions... Standard and Accelerated. The Explorer Standard edition allows reporting off of Universes, just as the original Polestar product did. Explorer Accelerated allows reporting off of SAP BWA indexes as well as Business Objects universes. Both versions now allow uploading of excel files to report off of. You can export an Information Space to a Webi doc or Excel file. Users can now save favorite links to an Information Space. Sorting has been improved as well as graphing functions and overall display. You'll have to install the latest build of Explorer - "Explorer 3.2 SP1" and compare. I don't know of a document or matrix that compares Polestar to Explorer. The two are basically the same product with a number of enhancements added to the Explorer line. -
Difference between a WEB service and a Enterprise Service?
Can Anybody explain me the difference between a WEB service and a Enterprise Service?
Hi Anilkumar K Naidu ,
Web service
A Web service is a self-contained, modularized functionality, which can be published, discovered, and accessed across a network using open standards and which is supported by SAP NetWeaver. Web services cover services provision for integration within an enterprise as well as cross enterprises on top of any communication technology stack, whether asynchronous or synchronous, in any format.
Web Services in the NetWeaver framework play an important role in facilitating the integration of disparate applications from various departments or trading partners and thus increasing business productivity. This benefit allows small and medium businesses also to integrate their business applications with larger trading partners. The benefit derived from this seamless integration introduces security concerns when all the business logic is now being exposed through a standard interface that is a catalyst for security vulnerabilities. SAP Security Managers must use automated diagnostics tools to ensure that the security vulnerabilities are caught in pre-production and in post-production phase.
Web Services Testing: SAP Netweaver Platform
http://www.crosschecknet.com/web_services_testing_SAP.php
How Web services play a key role on the SAP NetWeaver
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-500244687cbd30ffd
How to develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How To... Set Up a Web-Service Related Scenario with SAP xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Enhancing Your Web Services with SAP Exchange Infrastructure
http://www.sappro.com/downloads/SAPXI.pdf
Web Services, Part XI: Consuming Multiple Web Services
http://www.webreference.com/js/column106/
Vulneribility assesment of SAP Web Services
http://www.crosschecknet.com/resources/white_papers/sap_va.pdf
Enterprise Service
Enterprise Service-Oriented Architecture (Enterprise SOA)
Enterprise SOA is a blueprint for an adaptable, flexible, and open IT architecture for developing services-based, enterprise-scale business solutions. With SAP NetWeaver as a technical foundation, enterprise SOA moves IT architectures to higher levels of adaptability and moves companies closer to the vision of real-time enterprises by elevating Web services to an enterprise level.
An enterprise service is typically a series of Web services combined with business logic that can be accessed and used repeatedly to support a particular business process. Aggregating Web services into business-level enterprise services provides a more meaningful foundation for the task of automating enterprise-scale business scenarios.
SAP Enterprise Services Architecture
http://en.wikipedia.org/wiki/SAP_Enterprise_Services_Architecture
ENTERPRISE SERVICEORIENTED ARCHITECTURE DESIGN, EVELOPMENT,AND DEPLOYMENT
http://download.sap.com/platform/esoa/brochures/download.epd?context=FB8D5E235B637255604CD1EDB755014400C523BC4E4632245A59C838A212B5F04C71A43F8B38FC591628F4C698D8CAA859405AA974284758
Enabling Enterprise Services
http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/content.htm
Enterprise Service-Oriented Architecture
https://www.sdn.sap.com/irj/sdn/enterprisesoa
Define Enterprise Services using the Enterprise Services Community
https://www.sdn.sap.com/irj/sdn/define-es
Enterprise service bus
http://en.wikipedia.org/wiki/Enterprise_service_bus
Enterprise Services Workplace
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/flddisplay.asp
cheers!
gyanaraj
****Pls reward points if u find this helpful -
Documentation on differences between Version ECC 6 and Old version
We are looking for information/documentation on differences between Version ECC 6 and Old version for HCM. Appreciate for your great help.
Best Regards,
EricHai..
Re: differnce b/n 4.7 and ecc 6.0
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
https://websmp210.sap-ag.de/releasenotesRelease Notes
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/instguides
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/ -
Difference between center,edge mmcm and edge direct allignments
What is the difference between center, edge mmcm and edge direct allignments.
Both of these terms are used most often used (but not exclusively) when describing source synchronous interfaces.
Edge Aligned vs. Center Aligned
When a device uses source synchronous communication, be it a device that sends data to an FPGA (an input to the FPGA) or a an FPGA sending data to an external device (an output of the FPGA), the device needs to define and describe the timing relationship between the clock and the data that it is forwarding to the other device. The receiving data needs to know this timing relationship in order to devise a mechanism to capture the data.
The timing relationship can really be just about anything, but two types are common:
Edge Aligned:
This is the simplest for the transmitting device. The device simply generates the forwarded clock and data using the same mechanism. If the sending device is an FPGA, then it uses an internal clock to drive an ODDR that drives the forwarded clock, and uses the same clock to send the forwarded data, either using an IOB flip-flop (SDR) or an ODDR flip-flop (DDR).
Using this mechanism, the timing relationship is often (but not always) described as a skew; i.e. the data will change +/-200ps around the edge/edges of the clock.
Of course, this clock/data timing relationship can rarely be used "as is" by the recieving device, so the receiving device will be responsible for adding some delay or other mechanism to use the forwarded clock to capture the forwarded data (i.e. an MMCM shift or an IDELAY).
Center Aligned:
This is supposed to be the simplest mechanism for the receiver. The transmitter uses some internal structure to place the edges of the forwarded clock in the middle of the forwarded data valid window. In an FPGA (as a transmitter), an internal clock would drive an ODDR for the forwarded clock, but the forwarded data would be driven from either an IOB FF using an inverted clock (SDR) or an ODDR using a clock that is 90 degrees out of phase (DDR). (Or it could be vice versa - the data uses the normal clock, and the forwarded clock uses the inverted or 90 degree clock).
Using this mechanism, the clock/data relationship is often (but not always) defined as a provided setup/hold relationship around the forwarded clock; i.e. the data will be valid 1.5ns before the edge of the clock and remain valid for 1.5ns after the edge of the clock.
The idea is that using this timing relationship, the receiver should be able to use the forwarded clock as is to capture the forwarded data. In general, though, this is rarely true, since most devices don't have an equal required setup and hold time; so the receiver still needs to modify the clock/data relationship to center its required window in the provided window.
MMCM vs. Direct Capture
This is a different concept. Regardless of which alignment is used (edge, center or something in between), the receiver (now we are assuming it is the FPGA doing the reception) needs to implement some clocking mechanism to use the forwarded clock to capture the forwarded data. There are really two styles:
Direct Capture:
The forwarded clock is brought in and goes directly to a clock buffer (either BUFG/BUFH or BUFR/BUFIO), which is used to capture the incoming data. Generally (as I said above), the clock/data timing relationship needs to be changed, and when using this capture mechanism, this can only be accomplished using an IDELAY on the clock or data (or both). When done this way, the clock has a propagation delay through the delay element (the IDELAY)
MMCM Capture:
Here, the forwarded clock is brought in on a clock capable I/O, then through an MMCM and from there to a BUFG or BUFH (with feedback to the MMCM). When done this way, the "common" way of modifying the clock/data timing relationship is by adjusting the phase delay of the MMCM output clock.
There is a subtle but extremely important difference in Vivado (and SDC/XDC) between a propagation delay and a phase delay (or phase shift). It has to do with how the tool determines which clock edge will capture data that is generated by a particular clock edge.
When we use a set_input_delay, we describe to Vivado a data window associated with a particular clock edge. By default, that data window will be captured by the next edge of the clock. The definition of the next edge is different when using these two mechanisms.
When a clock edge is propagated through a delay element, the resulting clock is the same edge. Lets take the example of a 10ns clock (rising at 0ns, falling at 5ns) with a 2ns delay (using an IDELAY) capturing an SDR data. The rising edge at time 0ns will generate a data window. By default, it will be captured by the next clock edge, which is at 10ns. After the 2ns of propagation delay, the internal clock at 12ns will be used to capture the window.
When a clock is phase shifted, a new clock is generated. Using the same example using an MMCM, the output clock of the MMCM rises at 2ns and falls at 7ns (and rises again at 12ns). So, the data window defined by the first rising edge of the input clock (at time 0), will be captured by the next rising edge of the phase shifted clock, which is at 2ns (this 2ns rising edge of the phase shifted clock is the "next" edge after the 0ns edge that generated the data window). This is different than the previous example, where the internal edge at 12ns (not 2ns) would capture the first window.
As a result, the constraints you use to describe the timing relationship (the set_input_delay) needs to be different between these two styles. Its also a bit messy, since the constraints that are correct for an MMCM with 2ns (or even 0.01ns) of phase delay are not correct for an MMCM with 0ns of phase delay (which is a bit icky).
I hope that clears things up!
Avrum -
Difference between Release call, End and Termination node in ICM
Hi all,
Can anyone let me know the clear difference between Release call, End and Termination node in ICM and in which situations we should use these nodes.
Thanks.
Regards
DeepakCheck this, hope will be helpful.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise7_0/user/guide/ipce70sg.pdf
Sent from Cisco Technical Support iPhone App -
What is difference between Audigy 2 LS and Audigy 2
As topic say what is difference between Audigy 2 LS and Audigy 2 ZS?
I sow Audigy 2 LS in my local store but cant find info on creative.com about it.Z_unit,
The Audigy 2 ZS is our current top of the line audio card. It supports DTS decoding and is capable of 7. output. I am not aware of an Audigy 2 LS, however we have an Audigy LS which is a 5. capable sound card that is based on our original Audigy's features. Was the card that you were looking at in a retail box or was it in a brown box?
Jeremy -
What is the difference between System.out.println() and System.out.print()?
Hi everyone,
I am only a new comer and know very little about Java. I will appreciate a lot if anyone teaches me what the difference between two method println and print is? Thank you so much.The PrintStream class defines a number of print() methods that ... print
things. System.out is a commonly used PrintStream.
The difference between the print(...) and println(...) methods is that the
second one prints a new line at the end. What it actually prints varies
from system to system: sometimes it will output a '\n' sometimes not.
There is a system property called line.separator that determines
how a new line is output.
Maybe you are looking for
-
So far i must say "Worst motherboard ever" ! I had problem with my cpu E8500 due to bios update and now even memory also. I have this computer all new parts Msi x48c Platinum Radeon 4870 1 gb ram Intel core 2 duo 3.16 E8500 Samsung f1 Hdd 1 TB Corsa
-
I just donloaded the lastest version of iTunes but when it opens it says a componet was not installed repair or reinstall it. I did and the same thing happens. Any ideas?
-
24" TV with VGA and HDMI and speaker connection?
Bought a 24" LED TV that has VGA input. Two to three inches to wide for a monitor, but got this one because of price and the VGA input. It also has a HDMI input. Previously when doing a search for TV with PC input the results would bring up listi
-
I bought €40 worth of ITunes cards from France but when I go to redeem it, it says that I have to use the French storefront I don't know what to do and will it change into pounds if I change it over to the French storefront so can you please help me
-
Problem making an infoobject navigation attrib in multiprovider
Hi I have a bespoke infoobject ZPNLATTRB assigned as a navigation attribute of 0ACCOUNT master data. I could successfully switch this infoobject as nav attrib in the cubes and dso. However when I tried to switch this infoobject as nav attrib in the