Differences between Robohelp and Robohelp Server

I am in the process of evaluatinf Robohelp. I have found out
there are 2 versions: Robohelp and Rohohelp Server. can someone
list the differences in these products or direct me to a
link/document where I can find this information?
Thanks in Advance
Rodman Veney

Hi, Rodman
You may find this article in the Adobe Developer Center
helpful as well. It refers to RoboHelp Server 6, but virtually all
information remains relevant for v7. As Rick says, "Pro" is simply
the same as WebHelp or FlashHelp, but the content is published to
the RoboHelp Server so that you can get the benefit of user
feedback reports and the other features described here:
http://www.adobe.com/devnet/robohelp/articles/rhserver.html
Thanx
John

Similar Messages

Difference between ITS and WAS server

difference between ITS and WAS server

Hello Pradeep,
The ITS is the Internet Transaction Server. WAS is Web Application Server. I'm not sure how to compare the two because the WAS from Basis 6.40 and higher includes the ITS. I think the question you wanted to ask is the difference between the Standalone ITS and the Integrated ITS???
The Standalone ITS is installed on a web server (IIS or Apache usually). It could also include another server that we call the AGate.
The Integrated ITS comes with the WAS Basis 6.40 and higher. Therefore not needing a separate web server.
There is also a note that lists some differences of the two.
Edgar

Sorting differences between Oracle and SQL Server

Hello All,
This question is related to both Oracle and SQL Server
I have a requirement where I want to compare 2 tables line by line. One table is in Oracle and other table is in SQL Server
And suppose that both of the tables don't have a primary key. Now when I sort the records using order by clause for a column then -
Rows having null values in that column of Oracle are placed at the bottom.
Where as Rows having null values in the same column of SQL Server are placed right at the top.
How can I make either of them to behave like other.
My sole aim is to have same order of occurrence of rows in both Oracle and SQL Server tables so that I can compare them line by line.

For example :
select * from emp order by comm;
So all null value in comm column are at the end.
Now if you wish to get them on the top of select output then :
SELECT EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,NVL(COMM,0) COMM,DEPTNO FROM EMP ORDER BY COMM;
Means i am using NVL (oracle function) function. If comm column is having null value it will converted to zero value at the time of exectuion of select query.
So, now comm column is having zero value in select output and SQL Server is having nulls at the top. I do'nt know who to make nulls to zero in SQL Server. So issue solved.
HTH
Girish Sharma

What is the difference between mysql and mysql server

Hi,
I notice that mysql and mysql server has been used interchangeably, but are they the same thing? could somebody give a brief explanation about this?
Many thanks.

Yes. they are the same.

BACK button difference between Weblogic and J2EE server

          Hi Everyone,
          I have a J2EE application implemented mainly with JSP and EJB, which can run on
          both J2EE and Weblogic Servers seperately. When running on either of them, the
          server acts as both a web and application server.
          It is my understanding that it first goes to the cache in the browser when you
          try to revisit the previous page (JSP files) by clicking the BACK button in the
          browser. If the page is there, it just displays that page from the cache. If not,
          it will go to the server to retrive (execute) that page.
          When I run my application over J2EE server and try to visit the previous page
          by using the BACK button in the browser, it does this way correctly. But when
          I run my
          application over Weblogic server, it always goes to the server and execute the
          JSP file again in the server, rather than simply retriving that page from the
          cache. If your JSP file is simply doing data retriving, that is fine. But if it
          is doing data inserting, it will insert your data again. This is not good.
          I know that the Weblogic server is mainly an application server. But I am not
          sure when it acts as a web server,
          why it works differently from J2EE which also can acts as both an pplication and
          a web server. Does anyone have any ideas or suggestions about this?
          Thanks a lot.
          -John


I believe that the correct behaviour is to rerun the .jsp page unless the
          user specifically sets the header to allow the browser to cache it. That
          being said... You should never make a web application that can be broken by
          the user hitting "reload" or the browser automatically retrying. An
          application like this is very fragile and will probably break in practice.
          I suggest that you either make all your pages idempotent or you keep track
          through a hidden form field a transaction id and only allow the execution of
          any particular transaction once. As far as WebLogic not being a good web
          server, I would say that with 6.1 you get most of the management advantages
          of using a separate web server and also most of the static file performance
          you will find with apache or IIS.
          Sam
          "John Wang" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Hi Bruno,
          >
          > Thank you for your prompt reply.
          >
          > I think I might not explain my problem clearly. My application
          > is in developing stage now. So we are just working on a single
          > serevr which can acts as both a web and an application server.
          > Later we are going to distribute our application into a web and an
          application
          > seperately.
          >
          > As you said, it seems that my problem is because the weblogic server is
          mainly
          > an application server and does not act as a web server very well. So if I
          distribute
          > my application into both a web and an application servers, it should be
          fine,
          > since it is ok when I run it over the J2EE server. Is this correct?
          >
          > In other words, I can say that the J2EE server is configured better in its
          role
          > as a web server than the weblogic server, isn't it?
          >
          > In addition, all my JSP files are only dealing with catching
          > data from user input and displaying data. Data inserting is done
          > by EJB and JavaBeans through the JSP files. Because those JavaBeans in the
          JSP
          > files, each time when I use the BACK button, it will invoke those
          JavaBeans and
          > EJBs through the JSP files and do things like inserting in the background.
          That
          > is what I mean in my previous message.
          >
          > Thanks.
          >
          > -John
          >
          > "Bruno" <[email protected]> wrote:
          > >
          > >Hi John,
          > >
          > >You should use a real Web Server on the front side of your application.
          > >Weblogic
          > >is mainly an application server that has to be used in middle tier. But
          > >it's not
          > >a good Web Server. Like almost all J2EE application. You should use a
          > >separate
          > >web server like apache, optimised to serve static file. Furthemore, this
          > >approach
          > >will enable you to physically separate the two servers for a better
          security.
          > >Anyway, usually jsp files are dynamic files and are not intended to be
          > >totally
          > >cached (except in special cases). I think you should just use JSP to
          > >display data.
          > >If you want to do data inserting, you should use EJB or JavaBeans for
          > >that rather
          > >than JSP.
          > >
          > >Hope it helps
          > >
          > >Regards
          > >
          > >"John Wang" <[email protected]> wrote:
          > >>
          > >>Hi Everyone,
          > >>
          > >>I have a J2EE application implemented mainly with JSP and EJB, which
          > >>can run on
          > >>both J2EE and Weblogic Servers seperately. When running on either of
          > >>them, the
          > >>server acts as both a web and application server.
          > >>
          > >>It is my understanding that it first goes to the cache in the browser
          > >>when you
          > >>try to revisit the previous page (JSP files) by clicking the BACK button
          > >>in the
          > >>browser. If the page is there, it just displays that page from the
          cache.
          > >>If not,
          > >>it will go to the server to retrive (execute) that page.
          > >>
          > >>When I run my application over J2EE server and try to visit the previous
          > >>page
          > >>by using the BACK button in the browser, it does this way correctly.
          > >>But when
          > >>I run my
          > >>application over Weblogic server, it always goes to the server and
          execute
          > >>the
          > >>JSP file again in the server, rather than simply retriving that page
          > >>from the
          > >>cache. If your JSP file is simply doing data retriving, that is fine.
          > >>But if it
          > >>is doing data inserting, it will insert your data again. This is not
          > >>good.
          > >>
          > >>I know that the Weblogic server is mainly an application server. But
          > >>I am not
          > >>sure when it acts as a web server,
          > >>why it works differently from J2EE which also can acts as both an
          pplication
          > >>and
          > >>a web server. Does anyone have any ideas or suggestions about this?
          > >>
          > >>Thanks a lot.
          > >>
          > >>-John
          > >>
          > >
          >

Difference between webserver and Application server

Is there any way to stop the webserver but not the application server.
Do they run on the same port? How is that possible?

Is there any way to stop the webserver but not the
application server.It depends on server.
Do they run on the same port? no

What is the difference between BW and content server?

I remember some years ago, they were the same .
Now are they different?
Please help. Points!

Yes. they are the same.

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Saidireddy

Hi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

What are the Basic Differences between Oracle and MS-SQL server Database?

Hello,
anybody pls Guide me about the Differences between Oracle and MS-SQL server Database.and also IBM Databases also
Regards,
Balaram

SQL Server only works on Windows-based platforms, including Windows 9x, Windows NT, Windows 2000 and Windows CE.
In comparison with SQL Server , OracleDatabase supports all known platforms, including Windows-based platforms, AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, Sun Solaris and so on.
The SQL Server advantages:
SQL Server holds the top TPC-C performance and price/performance results.
SQL Server is generally accepted as easier to install, use and manage.
The Oracle Database advantages:
Oracle Database supports all known platforms, not only the Windows-based platforms.
PL/SQL is more powerful language than T-SQL.
More fine-tuning to the configuration can be done via start-up parameters.
Samrat

Difference between ITS and Web Application Server

Hi All,
What is ITS server. Can anyone explain me the difference between ITS and WAS(Web Application Server)
Thanks
Harpreet

Hi Harpreet:
ITS is basically the tool that allow you to use SAP via http. Theres lots of info about <a href="http://help.sap.com/saphelp_nw04/helpdata/en/0d/654d356560054ce10000009b38f889/frameset.htm">ITS</a> or <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/5f/0ef441ad7bc417e10000000a155106/frameset.htm">WebAS with Integrated ITS</a>
The ITS is a standalone application connected to R3 via RFC connection, In the SAP WebAS the ITS is integrated to the system.
Hope this help!
Juan
PS: Please reward with points if helpful

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

What is the difference between PUSH and FETCH

I am a little confused. I use my iphone for both my personal POP email accounts and my business exchange account. I am trying to save as much battery as I can so I turned off push and set everything to manual...but now when I try and get may mail....it either says "connecting" or "checking for new mail" at the bottom of the screen and nothing happens from there.
What is the best way to setup this situation for the most battery life? I don't need it to automatically download emails just when I open the email accout would be nice.
I also noticed that when I delete an email from my iphone on my exchange account, it also deletes is on my desktop at work...I need to turn this off...is it possible?

Hi maxum25,
The difference between push and fetch is that:
When using push, the server sends a signal to the iphone and lets it know that an email is coming its direction. Kind of like receiving a call. The iphone does not need to do anything except receive the email.
When using fetch, the iphone has to wake up every so often and send a request to the server to see if there is any new email waiting for it on the server to download. This takes more time because the iphone sends a request, the server says yes there is some, the iphone says ok give me the new email.
Now the exchange email uses active sync to keep all changes on the exchange server and mobile device in sync. This is automatic and is the nature of exchange and active sync. In order to keep this from happening you would need to talk to your IT dept. and see if they have an imap or pop alternative. Even using imap reflects the changes back to the server.
Hope this helps.

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What is the difference between SWF and F4V in the context of Streaming or progressive Download?

Hello everybody,
I am absolutely a beginner in working with Captivate and furthermore my technological know how is not that good.
So, I have problems to understand if the export formats SWF and F4V are both capable to be published in the Internet as streaming video and as progressive Download? Well so, I do not really understand the difference between streaming and progessive download either?
Furthermore I was asking myself if this issue depends on how I imported flash videos (there are these two options) in my Captivate project during the production phase?
I would be very thankful for some helping information!
Greetings,
Mareike the beginner

Welcome to our community
I'm not certain I fully understand the differences myself, but will toss out what I believe to be true about the formats. Hopefully, if I'm incorrect in my bellief, someone with more definitive knowledge will chime in.
It was explained to me a couple of years back and is my understanding that "streaming" only applies to a video based format such as F4V, FLV and it doesn't apply to SWF. With SWF, you may specify a preload value. So when the SWF transmits from the web server to the PC, a certain percentage has to be received before play begins. But that's not streaming. It's preloading.
For streaming to occur, the web server establishes a communication channel between the server and the destination PC. This channel is monitored to see what speed is in use. Only enough information is then transmitted to be comfortable at that speed. If the speed improves during the connection, the server serves data at a faster rate. If the connection degrades, the information transmitted is also scaled back so as to accommodate the lower speed.
With SWF, after it has all been downloaded, a savvy user is able to poke around in their temporary internet files and save the SWF for play later. With streaming, this isn't possible because as the stream is viewed, it evaporates from memory.
Seriously hoping others will chime in here to confirm or deny this.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

What is the difference between TO_CHAR and TO_DATE()?

Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') ||     NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
     WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
     AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
          '2','02', '3','03', '4','04', '5','05',
          '6','06', '7','07', '8','08', '9','09',
          'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".

try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
         DECODE(TO_CHAR(SYSDATE, 'MM'),
                '01', '1',
                '02', '2',
                '03', '3',
                '04', '4',
                '05', '5',
                '06', '6',
                '07', '7',
                '08', '8',
                '09', '9',
                '10', 'A',
                '11', 'B',
                '12', 'C') as code
    from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM

Differences between Robohelp and Robohelp Server

Similar Messages

Maybe you are looking for