Differences between Soalris and Solaris Express /Developer Edition

Hi
Thank you for readingn my post
What is different between Solaris Express (Developer Edition) and solaris OS?
Are they the same and with same capabilities?
Can I install S1 Grid suite in a Express edition?
Thanks

Solaris 10 (with several updates) is the current release version of the Solaris operating system.
Since the release in '05, Sun has been developing the "next" version of Solaris. Using the OpenSolaris code as a base, this version is codenamed "Nevada". Periodic builds of this version are available as Solaris Express. So you get more up-to-date drivers, features, and bugs from it. Because it's under development, there are no patches. Instead you'd need to upgrade to the next release (or create your own patch).
I haven't looked specifically at S1 Grid, so it very likely will install. However installations on Solaris Express may not be a supported configuration if you need that.
Darren

Similar Messages

  • A problem logging in in Solaris Express Developer Edition 05/07

    Hi all.
    I just upgraded Solaris 10 11/06 to Solaris Express Developer Edition 05/07 on a Sun Ultra 20 M2 and a strange problem arose: after root has logged in in a Gnome session, then when another user tries to log in in Gnome everything slows down: the login screen with "Window manager" takes some 20 secs to go away and then "Panel" sticks there... The only option is killing X with ctrl+alt+backspce. This only happens if root logs in with Gnome, and not in CDE. If root doesn't log in, nothing strange happens ever.
    The problem seems unrelated with the user that logs in:
    - existing users which could login in Solaris 10 11/06 now have this problem
    - new users have this problem too...
    Rebooting the machine and never logging in to Gnome with root "solves" the problem.
    Has anyone ever had this problem?
    Can be a problem relating to upgrading?
    Thanks,
    Enrico.

    You should probably direct SXDE queries to the forums at http://opensolaris.org, more chance of a response from the JDS developers there.
    Message was edited by:
    calum

  • Help me in Installing Solaris Express, Developer Edition  X 86

    Hi,
    Help me in installing Solaris Express, Developer Edition
    When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
    i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
    Please,Help me.
    Thanking you,
    P.Sathish Kumar

    Hello,
    first of all: Try to run the HCTS (Hardware
    Compatibility Test Suite) first, it's available
    here:
    http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
    l
    This you can run from Windows, and it will list all
    hardware that has drivers, and all those, that do not
    have drivers (including some public domain drivers).
    After that, you have the possibility to install
    Solaris WITHOUT a GUI, use one of the two "terminal"
    modes. The first Is still a GUI, as it only starts X
    and opens a terminal, in which then the installer
    runs. The second does NOT start X, but runs the
    installer on the console. Try this one, and once you
    get through that, you can afterwards figure out the
    settings of the Xserver.Hi ,
    i have installed the solaris using console.
    Still GUI is not starting, the moniter is switched off when GUI gets started
    I used Hardware Compatibility Test Suite, its say that system is supported
    by Solaris.
    Should i have change BIOS setting to stated the system
    Bye
    P.Sathish Kumar

  • Help me in installing Solaris Express, Developer Edition X86

    Hi,
    Help me in installing Solaris Express, Developer Edition
    When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
    i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
    Please,Help me.
    Thanking you,
    P.Sathish Kumar

    Hello,
    first of all: Try to run the HCTS (Hardware
    Compatibility Test Suite) first, it's available
    here:
    http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
    l
    This you can run from Windows, and it will list all
    hardware that has drivers, and all those, that do not
    have drivers (including some public domain drivers).
    After that, you have the possibility to install
    Solaris WITHOUT a GUI, use one of the two "terminal"
    modes. The first Is still a GUI, as it only starts X
    and opens a terminal, in which then the installer
    runs. The second does NOT start X, but runs the
    installer on the console. Try this one, and once you
    get through that, you can afterwards figure out the
    settings of the Xserver.Hi ,
    i have installed the solaris using console.
    Still GUI is not starting, the moniter is switched off when GUI gets started
    I used Hardware Compatibility Test Suite, its say that system is supported
    by Solaris.
    Should i have change BIOS setting to stated the system
    Bye
    P.Sathish Kumar

  • Solaris Express Developer Edition, free DVD kit

    Today I ordered the "Free Solaris Express Developer Edition DVD":
    "For a limited time, Sun is offering a Solaris Express Developer Edition DVD for x86 platforms mailed to you at no charge." (http://developers.sun.com/sxde/download.jsp)
    Will I get the new 9/07 version or an older one? When I ordered Solaris 10 some time ago, Sun sent me version 11/06.
    Thanks!

    Well, it looks like this version of Solaris simply forgot to bundle the FLAC gstreamer plugin. Does anyone know where to find a version compiled for solaris?

  • Error installing Oracle 10gR2 on Solaris Express Developer Edition

    Hi
    I'm trying to install Oracle Db 10gR2 on Solaris Express Developer Edition 1/08 for x86 but it fails with the following link error:
    INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/genclntsh
    INFO: ld: fatal:
    INFO: symbol `ntcontab' in file /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libn10.a(ntcontab.o): section [3] .data: size 0x60: symbol (address 0, size 0x70) lies outside of containing section
    INFO: ld:
    INFO: fatal:
    INFO: File processing errors. No output written to
    INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libclntsh.so.10.1
    INFO:
    INFO: genclntsh: Failed to link libclntsh.so.10.1
    INFO: *** Error code 1
    INFO: make: Fatal error: Command failed for target `client_sharedlib'
    Any ideas would be appreciated.
    Thanks

    If your version of Solaris is not supported, see the support matrix, you are on your own. This is likely the case.

  • Solaris Express , Developer Edition as a linux alternative

    Hi Folks,
    there is no doubt that Solaris began shining lately . I'm thinking to install it on my laptop as an alternative to linux to develop web applications .
    some issues are bothering my a lot, I'll name them to you ,so we can decide together :
    1. ruby official website does not provide a solaris package, how to develop Rails websites then ?
    2. Mono has no official package for x86 machines running solaris , only Solaris 8 (Sparc) is supported .
    I'm very interested in Solaris, especially Developer edition , eager to start to installing it !
    what do you think ?

    I think I hope it installs, especially on a laptop system. It failes to install on every desktop system here, I wouldn't dare put it in my laptop and see what it says. Laptops usually have a more esoteric hardware configuration than desktop systems.
    For you I really don't see the benefit of switching operating systems just to develop web applications. If you were a Java developer developing J2EE web applications then Solaris and it's integrated Java Enterprise system and first-rate developer tools would be a great change, but for Ruby on Rails and Mono - I don't see the point.
    For Ruby there may be a package available, check the OpenSolaris website and see if it has been ported over (it most probably has been, but I haven't checked yet).
    For Mono... I don't see the point in developing .NET web applications for Linux/Solaris, so I won't go there. Mono is a joke compared to Microsoft's .NET platform.

  • Solaris Express Developer Edition + Apple Airport Extreme

    I just installed Solaris Express Develper Edition without any problems, but I can't seem to get my wireless connection up and running. I use an Apple Airport Extreme and while my MacBook with Mac OS X and my Xubuntu machine have no problems connecting to the internet through the Airport, my Solaris says he can't connect.
    I allready disabled the Auto-magic stuff so I can setup the connection manually. I did it with the following two commands:
    svcadm disable svc:/network/physical:nwam
    svcadm enable svc:/network/physical:default
    The wireless interface ath0 can detect all the available networks (including mine), so it works.
    My Airport uses WPA/WPA2 Personal and DHCP.
    In the Network settings of Solaris I've set the properties of the wireless ath0 interface as follows:
    * enable this connection
    * activate on boot
    * network name (ESSID): my network is detected and I can select it from the dropdown list of available networks
    * Key Type: Plain (ASCII)
    * WEP key: my WEP key (the thing I filled in as WPA/WPA2 Personal on my airport)
    * Connection settings Configuration: DHCP
    I click OK and then try to activate the ath0 interface, but it doesn't work. The message is:
    "Could noet enable the interface ath0
    Check that the settings are correct for this network and that the computer is correctly connected to it".
    Which is frustrating, because as far as I know, the settings are correct (ESSID, WEP, ...) and the computer is correctly connected as it can detect all the available wifi networks in my area.
    Does anybody have any idea? Thnx in advace,
    Nico

    In the Network settings of Solaris I've set the properties of the wireless ath0 interface as follows:
    * enable this connection
    * activate on boot
    * network name (ESSID): my network is detected and I can select it from the dropdown list of available networks
    * Key Type: Plain (ASCII)
    * WEP key: my WEP key (the thing I filled in as WPA/WPA2 Personal on my airport)
    * Connection settings Configuration: DHCPWhere is this? I've never seen it. :-)
    I just use sys-unconfig and select DHCP and off it goes.
    alan

  • Solaris Express Developer Edition on Acer Aspire 9100

    I did some research and it appears that the latest edition or Solaris Express will install and work on the Acer Aspire 9100. It is a turion with a nvidia chipset, atheros wireless and an nvidia 6100 graphics chip set. Does anyone have experience with this install.

    Re research: You have tested Your hardware with Hardware_Detection_Tool? It seems to be more up to date than Install_Check. Install (or use already installed version) Windows, download this small tool and run it on-line (Internet connectionis necessary). Latest nevada version fills many gaps in previous releases.
    Good luck!

  • What's the difference between CS5 and CS5 Student & Teacher Edition?

    Hi,
    I've been browsing the education shop for Photoshop, and noticed that there's both a Photoshop CS5 Extended and CS5 Extended Student and Teacher Edition. Also there's a £45 difference between the two. Is there any difference at all in the program itself, or does the Student & Teacher Edition just have the added restriction of not being able to resell it? Surely there must be something to have a £45 difference.
    Thanks in advance.

    Same exact program.
    Student teacher version onc
    e you buy it, you own it and it cannot be transfered to someone else.
    Also, from reading other posts, you cannot upgrade. But that may vary depending on country?
    You also have to provide proof that you are a teacher or a student. 

  • Difference between FCS2 and FC Express 4? bit confused...

    I was originally looking to buy FCS2 for HDV work, then thought about Final Cut Express 4, however i'm a little confused over what the cheaper alternative lacks. I know Express can't work with more professional formats, but that's about all i know. I'll be wanting to do allot of soundtrack work, foley work, etc. Is express a trial version such as logic express? which if i remember rightly, you lose allot of features after 30 days. If someone could list a few of the major differences that would be great
    Cheers
    Phil

    http://www.apple.com/finalcutexpress/
    Works with HDV and AVCHD when converted to AIC.
    There is no trial version or downloadable version.
    It used to be bundled with Soundtrack, but no longer is, and the price dropped $100.
    Does contain LiveType as well.
    I don't believe you can batch capture with FCE, but other than limitations about pro codecs, it works about the same.
    If you are working with HDV, it may be the ticket.
    Here is a list features:
    http://www.apple.com/finalcutexpress/specs.html
    You have to decide if something is missing/needed by you

  • Differences between Linux and Solaris command set

    Hi,
    It is complicated to learn Solaris? Is the set of commands the same of Linux?
    It is because is more simple for me to find a Linux Admin book than a Solaris book.
    Thanks.
    Lorenzo

    BTW: You might want to start with this peace if information:
    http://wwws.sun.com/software/whitepapers/linux/linux_overview.pdf
    One remark: this Blue/white paper is written for audience known to Solaris and new to Linux, but usefull the other way around.
    Specially table 1 is very usefull !
    Good luck, and Welcome as new Solaris Administrator.
    Eric.

  • Solaris Express Developer x86 -- only 64-bit?

    Hi, people, glad to be back. Just downloaded Solaris Express Developer edition x86 and installed -- almost with no problems.
    It's a system with Intel Celeron D with 64-bit and Hyper Threading support, DDR2 1Gb.
    Now running Solaris I noticed it's a 64-bit version, not 32-bit, as I meant to have. The command `isainfo -n` gives back ... "amd64"!
    Is there a 32-bit version of Solaris Express DE x86?
    Or maybe I need not worry at all and keep running the 64-bit one (actually, I've got no problem as yet)?
    Thanks in advance for any comments.

    So, my system supports 64-bit computing after all. I
    never thought about it, in fact.
    But does it mean Solaris Express DE x86 runs as
    64-bit on the systems supporting 64-bit, and as
    32-bit on 32-bit-only systems?Yes, that's correct. Solaris 10 was the first version of Solaris to support 64 bit operation on the x86 architecture.
    It and later versions (including Solaris Express DE x86) should automatically detect the architecture and run in that mode at boot time. There are some ways to force it to run in 32 bit mode only if necessary, but that would be unusual.
    Darren

  • Solaris Express Developer Questions

    Currently I am running Solaris Express Developer however i noticed there is no Subversion or CVS installed by default.
    The version I am running is as follows.
    bash-3.00$ uname -a
    SunOS solaris-devx 5.11 snv_55b i86pc i386 i86pc
    Any ideas if there is a newer version, and whether it has subversion and cvs installed by default?
    Thanks

    I have looked at the latest download for Solaris Express, Developer Edition 2/07 which is what I am running now.
    I have connected the Sun Update Manager and I receive no updates.
    Currently I am trying to use this as my development platform/workstation at work. Developing java applications seems to be well catered for however some sections of the desktop environment look a little rough.
    I am having issues printing from Evince and Gimp, which seem to be using a different printing interface to other applications.
    It seems that this "Developer Platform" may be a little green for use as a workstation without some proper update mechanisms...

  • TCP stalls often on Solaris Express Developer 02/07 on VMWare1.0.2 on WinXP

    Hi there.
    I got an older version of Solaris Express running fine on an amd box, and before upgrading to Solaris Express Developer edition 02/07, I wanted to try the new one out on vmware. Then I encountered some network wieredness. The IP stack seems to stall when I try to download big files.
    Here is what I done:
    installed Solaris Express Dev. on VMWare 1.0.2,
    disabled DHCP with the GUI tool,
    gave a static address
    disabled IPV6 by deleting /etc/hostname6.pcn0
    When I try some download from blastwave.org with pkg-get, the download goes on for about 10 seconds, then it stalls. Under that situation, ping doesn't reach my adsl modem and dig cannot resolve hostnames. The stall recovers after several minutes, runs for a while, then stalls again.
    Is anyone experiencing anything similar ?
    I have ubuntu linux successfully running on the same vmware server.

    We are facing very similar (the same?) problem.
    Does anyone have a solution to this?

Maybe you are looking for

  • Looking for an app that allows for screen switching/maximizing

    On my PC at work, I have an app that adds another button to the top menubar of all applications/windows. This button, when clicked, will move the window/application to the "other" monitor/display and can even maximize the window to fit the screen. is

  • Video playback in Safari iOS 8 is horrible now

    Any videos I play through websites in Safari all are horrible load times in the player now. A play button appears on screen, I wait some more, and THEN the video plays. This is the same wether on LTE or WIFI. Sometimes video skips around when playing

  • Transfering tv shows to ipod

    I recently purchased a tv show on itunes. It is in my itunes library, but it will not transfer to my ipod. I have a nano. How do I know if the ipod will play tv shows? Does it have to be a particular generation? please forgive my lack of knowledge!

  • Event History SM62 - doesn't show the events raised

    Hello, I definded an event within SM64 and raised the event during a perodical job. Now I thought to see the events with SM62, but there are only old events listed. I checked the selection criteria and changed them that all events should be listed. H

  • AnalysisTool questions

    The AnalysisTool frontend for the Clang Static Analyzer looks to be very useful. Does anybody out there have experience with this tool? Here are some confusing (to me) error messages I get which I need help in understanding: This error: "the name of