Differences between tcodes fk01,mk01 and xk01

Hi Guys,
Can any body please tell me the differences between the mentioned transactions.
what are the differences between vendors created through these transactions?
If my vendor is for utility items or non PO then can i create using XK01 or MK01?
thanks in advance...
Arjun

Hi Arjun,
FK01 can be used for maintaining the vendor details at the company code level & for general data.
MK01 can be used for maintaining the vendor details at the purchasing org level & for general data.
XK01 can be used for maintaining the vendor details at the company code , purchasing org level and general data.
Using XK01 transaction you can create different vendors for each pruchase organization of that company individual.
where as in FK01 you can create vendor for the whole company together.
MK01 transaction creates a new vendor record without payment details. 
Hope this will help.
Regards,
Nitin.

Similar Messages

  • Difference between TCode /SAPSLL/CD_FS_ARCH and /SAPSLL/CDOC_STCOMPL

    Does anyone could explain the difference between transaction /SAPSLL/CD_FS_ARCH "Flag Customs Documents Automatically" and transaction /SAPSLL/CDOC_STCOMPL "Flag General Customs Mgt Docs Automatically"?
    I understand it like this:
    Transaction /SAPSLL/CD_FS_ARCH marks all customs documents where the related documents in ERP are in a status to allow archiving.
    Which status will be set? Where can I check it (table/field)?
    Transaction /SAPSLL/CDOC_STCOMPL marks all customs documents which are in a status to allow archiving.
    Which status will be set? Where can I check it (table/field)?

    Hi Renate,
    The difference, as you say, is that the /SAPSLL/CD_FS_ARCH report checks the archiving status of the related Feeder System documents to determine whether or not the status of the GTS documents should be adjusted.  The /SAPSLL/CDOC_STCOMPL report does not take the Feeder System status into account as far as I can see.
    Report /SAPSLL/CD_FS_ARCH changes the GTS document status to "restricted" (value '3B') - you should be able to see that in table /SAPSLL/CUHDSTA (related to the Document Number in table /SAPSLL/CUHD).
    Report /SAPSLL/CDOC_STCOMPL also sets the same document status, and also takes into account the related GTS documents - for example the SCD, if relevant for a Customs Declaration.
    Hope that helps.
    Regards,
    Dave

  • Difference between tcodes AR29N and J1AI

    Hi,
    Can anyone tell me is there any difference between tcodes AR29N and J1AI along with their functionality?
    Regards,
    Rajesh/

    HI,
    The new value revaluation posting options of the Post Revaluation and New Valuation report allow for the individual account determination rules of every country. You can specify which account is to be used and the system can then default this account for revaluation postings.
    Here it looks for the valuation area
    the Asset Revaluation (Inflation) each asset using the Time Base and Exposure  variants assigned to it by means of the revaluation key.
    Here it revaluates the asset by using the revaluation key whcih contains the value of inflation. Inflation key is a time dependent.
    regards
    HK

  • Difference between ECC 6.0 and earlier versions

    Hi,
    one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD'  and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD'  respectively.
    (of course SPDD and SPRO tcodes is known by everone i suppose)
    Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
    Thanx in advance

    Unicode Errors Encountered and their Solutions
    E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
         Error:
         OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
         Solution:
         OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
    E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE  or  IN
          CHARACTER MODE  addition.
         Error:
         DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
         Solution:
    DESCRIBE DISTANCE  BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
    IN CHARACTER MODE.
    E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
         Error:
         IF USR02-UFLAG O YULOCK.
         Solution:  Since the data type of USR02-UFLAG is type INT and is compared with data type
                    X u2013 Hence the error. So we  define a new variable ZULOCK and assign the
                    value of USR02-UFLAG to ZULOCK.
                  New variable             
                  DATA: ZULOCK(1) TYPE X.   "APBRP00
                  Assign value               
                                ZULOCK = USR02-UFLAG.
            Compare -
                   IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
    E4.  HT cannot be converted to a Character type field
    Error :
    WRITE ht TO t_data+10(2).
    Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
             t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
             another data type where one of them is type string .Hence the error occur,
             so the data type of ht is been change to Type u2018Cu2019
         OR
               A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
         Error:
              DATA: BEGIN OF ht,
                   x(1) TYPE x VALUE '09',
              END OF ht.
         Solution:
                  Define Class after the Tables definition.
                       CLASS cl_abap_char_utilities DEFINITION LOAD.
                  Data Defination :  Comment internal table HT and define a variable HT type C.
           *   Insert + APRIA00 05/02/2007 Unicode project
           *   DATA: BEGIN OF ht,
         *         x(1) TYPE x VALUE '09'
           *   END OF ht.
         *   Insert - APRIA00 05/02/2007 Unicode project
           DATA HT type C.
           Before using HT assign Horizontal tab.
                     Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.  
    E5.  In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
         Error :
         #LINES                 TYPE I,
         Solution : Since the # is used in the start of name, it is not allowed. We need to
                  remove it. 
         Solution for the above
         V_LINES                 TYPE I,
    E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
         Error:
         OPEN DATASET PATH_NAME IN TEXT MODE.
         Solution:
         Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
         Upload        =  OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)    
         Error:
                data: begin of tab,                   "Excel Parameter Split at TAB
            t type x value '09',          "Tabulator
           end of tab.
                concatenate 'Material' 'Package Status'
                    into z_download-line separated by tab.
                ( In the above command  the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
         Solution:
         Define a  class just after the Table defination.
              CLASS cl_abap_char_utilities DEFINITION LOAD.
                Define  variable Tab as shown below :
              Data : TAB           TYPE C.
         Before the concatenate statement assign the value of Tab using pre-defined attributes.
              TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
          enabled; use the class cl_gui_frontend_services     
         Error-1:  Function WS_DOWNLOAD is obsolete in Unicode environment.
                call function 'WS_DOWNLOAD'
                     exporting
                          filename = zfilename
                     tables
                          data_tab = z_download.
         Solutions-1: Instead of WS_DOWNLOAD use  GUI_DOWNLOAD.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = zfilename
      TABLES
        DATA_TAB                      = z_download.
    E9.  The "/" character is reserved for identification of namespaces. It must be entered twice.
            The name  of a namespace must be at least 3 characters long.
         Error :      
                     U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         Solution :
         * Special character can not be used to define a data variable
         *      U/N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
                  U_N(3)        TYPE C,  "U/N    --> ERSETZT DURCH SPACE
         * Insert - APSUS02 07/02/2007 Unicode Project
    E10.  "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
             "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
             of a Unicode character.
         Error : This error is encountered when data from one internal table is copied to another
                             internal table which different structure. In this case its LP_TAB & CS_TAB.
                     LP_TAB[] = CS_TAB[].
         Solution :
              * Replace + APSUS02 07/02/2007  Unicode Project
    *   LP_TAB[] = CS_TAB[].
                  move-corresponding CS_TAB to LP_TAB.
              * Replace + APSUS02 07/02/2007  Unicode Project
    E11.  Could not specify the access range automatically. This means that you need a RANGE
              addition.          
         Error :  Range need to be specified as an addition to the command.
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
               Solution : 
                DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
              * Insert + APSUS02 07/02/2007  Unicode Project.
                                                          RANGE ABCD+0(4).
    * Insert - APSUS02 07/02/2007  Unicode Project.
    E12 .  Processing Terminated Error code: Error in opening /
                                              Path not found when downloading to Unix directory.
         Error : PARAMETER: outfile(92) DEFAULT
                  '/CP/interface/NPP/data/MX/cbslaprcpts'
                        LOWER CASE,
                   kmxmstrd AS CHECKBOX.
                This error is encountered when the path is missing. The above path is related to CCP.
         Solution:  For testing purpose comment the original path and replace it with
                                     /CP/interface/CCD/Unicode_test/ 
    E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
         Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
                   Call function 'WS_UPLOAD'
           Exporting
                Filename                = zfilename
                Filetype                = u2018DATu2019
           Tables
                data_tab                = z_upload
           Exceptions
                Conversion_error        = 1
                file_open_error         = 2
                file_read_error         = 3
                invalid_table_width     = 4
                invalid_type            = 5
                no_batch                = 6
                unknown_error           = 7
                gui_refuse_filetransfer = 8
                others                  = 9.
         Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
    1) First define a type pool and a variable of type truxs_t_text_data.
    TYPE-POOLS: truxs.
    DATA: it_raw TYPE truxs_t_text_data.
         2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
    *     I_FIELD_SEPERATOR        =
    *      i_line_header            =  ' '
          i_tab_raw_data           =  it_raw       " WORK TABLE
          i_filename               =  zfilename
        TABLES
          i_tab_converted_data     = z_upload[]    "ACTUAL DATA
       EXCEPTIONS
          conversion_failed        = 1
          OTHERS                   = 2.
         Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
    Put  square brackets after internal table as shown above.
    E14.    CURSORHOLD may not be converted into a number.
         Error:  GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
         Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.  

  • Cost difference between PM report MCI8 and IW38 orders cost

    Hi Experts!
    I have an issue of cost difference  between Plant Maintenance total actual cost of orders and Cost analysis report.
    Short Text    
    Cost difference between PM report MCI8 and IW38 orders cost   
    Long Text    
    Applied SAP notes 180047 and 112841 for the following error:
    Cost is not displaying in MCI8 for every 3 months intervals.
    Now this problem has been resolved but got an another error like cost
    difference between MCI8 report and IW38 order costs.
    Note applied method:-
    1). Configured FYV as Z1 with Period update for info structures S61 to
    S65, S70, S114 to S116.
    2). Regenerate order cost in Tcode OLI5.
    3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
    For Info Structures which is changed in the configuration SO61-SO65,
    SO70, S114-S116.
    4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
    Select Copy version
    For all info Structure SO61-SO65, SO70, S114-S116.
    *Steps for Reconstruction*    
    New another error like cost difference between MCI8 report and IW38
    order costs.
    Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
    12.2009 and execute
    Step 2. Drilldown the corrective maintenance order costs into period
    wise.
    Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
    Currency - EUR and execute
    Cost differences: E.g. Example A)
                                   MCI8                                 IW38
    Total costs             8.041,69                           5.544,99
    of WOs               18                                     18
    So far my view is that, regardless of the selection criteria or the
    output layout, predominantly the costs are different.
    I would expect that they are equal. And what the right result are,..u2026Iu2019m
    not sure.
    Regards,
    Santhamoorthy

    Hello,
    Sometimes this difference comes because of the selection period which we are choosing.
    Try to run IW38 once with the help of Basic start and basic finish dates of the order.
    And after that with the help of the period with the same dates range.
    You will get the difference also.
    the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
    But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
    I hope you got the idea about differences.
    Regards
    Naveen

  • Difference between work bench request and customizing request

    in abap point of view please give me the difference between work bench request and customizing request

    In simple terms -
    Work bench Request is used by ABAPer.(Creatation of Programs, TCodes or ABAP Dictionary Objects)
    Customizing Request is used by Functional Consultants. (Used to configure the system as per clients Business requirements).
    The Change Request is that request when you do some thing new in customizing or configuration in the system. The system will automatically pop with the change request pop box , when you can give request name as defined by the system or can give your own request name with heading of what changes you have made while customization. The system will generate a request number and you save it. (e.g.:- VEDK-2785467) VEDK- means the Clients System name then followed by the system generated request number.
    Now when you want to release the request you have to use the T-code SE10 where you can see the requests under the heading modifiable or released. Go to the modifiable option. Each request will have again an internal request number. First you have to release the internal request and then release the external request number. This will in turn released by the basis guys thru the T-code SM64 in a group when all the requests are pooled from different users.
    The task which you have mentioned in your question is nothing but the what task you have performed while customizing the client system and the heading name which have given it for that task and generated a request for that task.
    Change Request Management ...
    http://help.sap.com/saphelp_nw04/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Creating Change Request Management
    http://help.sap.com/saphelp_nw04/helpdata/en/42/157408dd674a9cbc099f634e9bd069/content.htm
    Change Request
    http://help.sap.com/erp2005_ehp_02/helpdata/en/e5/e5bc42348a43fba6f1b390fc8c4b36/frameset.htm
    Customizing Request:- which will be used when any customization changes are doing.
    Example:- In your standard Tcode always you cannot find all the fields or options, if you want to enable/disable some fields, in this case it will be treated as Customizing request, any customization will comes under this.
    Work Bench Request:- for new developments like new reports, BDC....etc, then Work Bench Request will be used.
    Reward if useful.

  • Difference between Avg OLAP time and Avg Frontend Time

    Good morning all!
    What is the difference between Avg OLAP time and Avg Frontend Time?
    I thought OLAP time would be included in Frontend time, but the numbers are not matching up?
    Thanks so much!

    Hi,
    Front-End time is the Renderring time of the object at the front-end. Basically when ever a BI Application or BI application object is executed it spends time at various levels like at Data Manager, OLAP, Planning, Front-end. Can check the stat's in view RSDDSTAT_OLAP.
    When the query is taking long time so u need to the time at ST03 Tcode/else RSDDSTAT table .Here u can find the DB time , OLAP time, Front end time If the DB time is more than 30% of time of total time then you got for Compressin , aggregates, indexes partitioning.
    The capture of query runtime statistics is done differently in 3.5 and in BI 7.0
    However, the OLAP time and DB times are always captured as two different things.
    In 3.5 refer to fields QTIMEDB and QTIMEOLAP. They are two separate measurements. In 7.0, they are TIMEREAD and TIMEOLAP in rsddstat_dm and rsddstat_olap tables.
    pls go through this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/e39fd25ff502d2e10000000a1553f7/frameset.htm
    Hope this helps
    Regards
    csm reddy

  • Difference between BAPI Function Module and Remote Enable Function Module

    Dear Experts,
        I want to know the main difference between BAPI Function Module and Remote Enable Function Module ?
    One main difference that I know is BAPI FM are declared in Methods of Business Object  ie BAPI are methods of BOR where as Remote Enabled FM are not. What are other differences? Is it possible to convert a Remote Enable FM to BAPI FM .
    regards
    Manish

    Hello,
    Did u create any ZBAPI?
    The Procdure for Creating the Customer BAPI is Create a Remote Enabled Function module and then goto the tcode BAPI.
    Once u go in to that just take the Project tab and enter the details.
    by this way u can create a Customer BAPI.
    With Regards,
    Sumodh.P

  • What is the difference between generate partner profile and creat partner

    What is the difference between generate partner profile and creat partner profile ?

    Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
    The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
    Generation of Partner Profiles
    The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
    • ORDERS
    • ORDCHG
    • ZINVRV
    • ORDRSP
    • INVOIC
    • FIDCMT
    • The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
    • This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
    • The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
    Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
    generate partner profiles tcode BD82
    creating partner profiles tcode WE20
     There are two methods for maintaining the partner profile:
     Maintain partner profile manually:
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
     Generate partner profile:
    Prerequisite: The current distribution model is distributed to all participating systems.
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
    Regards
    Vasu

  • What is the difference between ERS Transactions MRRS and MRRL ?

    Hi Experts,
    What is the difference between ERS Transactions MRRS and MRRL ? (in terms of posting the documents as well)
    Thank You,
    Nagarjuna Palnati

    Hi,
    In MRRS-You dont have the option of clearing Delivery costs.
    MRRL- you can settle the GR + Planned delivery costs.
    In ECC6.0 version you also have the option of settling delivery costs only for the frieght vendor using tcode MRDC.(Additional reqt-
    In custmizing for LIV you should enter the vendor for whom you will clear using MRDC)
    Reg,
    Deepak.

  • Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

    Hello All
    I hope that you can help me is juts a doubt about 2 check boxes
    I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
    that i don't know what is the difference
    The path is the following
    Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert  --> Setup EarlyWatch Alert
    Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
    Thanks and have a nice day

    Hello Cherios,
    The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
    Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
    There should now be no doubt about the two check box fields .
    Hope this information is helpful.
    Regards,
    Paul

  • The difference between VGA, DVI-D and ADC?

    Hi.
    The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
    Thank you for your input.
    Walter

    Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
     Cheers, Tom

  • The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

    Hi,
    Anyone know what is the difference between AIR-ANT5135D-R and  AIR-ANT5135DB-R ?
    From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
    However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference  Guide"
    http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
    Inside the document there is only AIR-ANT5135D-R.
    likewise for the 2.4 GHz,  AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference  Guide"
    Any help would be appreciated
    Thanks,
    Richard

    Found the difference, AIR-ANT5135DB-R and       AIR-ANT2422DB-R are  non-articulating antennas.
    Thanks!
    Richard

  • The difference between Telepresence Content Server and MSE 3500

    Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

    In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
    In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods.  One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc.  However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

  • What is difference between  Service map iview and Workset Map iview

    Hi Experts,
                        Can anyone tell me the difference between  service map iView and Workset Map iView.
    When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
    Thanks in Advance
    Janardhan

    Hi,
    Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
    Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
    if you want to more info pls go thr the below thread
    Workset Map iView
    i hope it will help you
    Thanks,
    Sreeni.

Maybe you are looking for

  • Missing or skipped invoice number after output error

    Hi, if there is an arror in output message (for example in smartform) the invoice is not saved in the database but the ranges (internal number and accounting document number) are increased. As for some fiscal numbers are skipped and this is no possib

  • Repositioning Finder

    Can not find out how to reposition the Finder... Am new to iMac and maybe am asking about obvious, but just couldn't find it since yesterday, which is when I got rid of my PC and got the iMac... I moved Dock simply by right-clicking and choosing righ

  • Summary Tables Questions...

    Hi to everybody, I use Oracle Discoverer 10.1.2 and created some summary tables - using both methods : being specified by me and Discover automatically defined them.... I have two questions: 1) Is there any way to define the summary table(materialize

  • How to fetch data from PTREQ tables

    I need to display  data in the customised webdynpro application from PTREQ tables. Can anyone help me out how to fetch data from these tables.

  • Deactivate enhencement

    Hi, I have created a project in CMOD and which contians 4 function moudle exits.Now i want deactivate only one function module exit only.How can i do this. Thanks, radha.