Differences btween QTX and QT7Pro for trim & merge of avi files

I need to do some trimming and merging of AVI files (DV format).
I have both QTX and QT7Pro installed.
What are the differences between the 2 in terms of features and quality when it comes to trimming and merging of avi files?

QuickTime X has only very basic editing features (trim) and limited export options.
QuickTime Player 7.6.3 Pro is the tool you'll want to use to "join" files and formats.

Similar Messages

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
What situations are better to export to to .PNG or .JPG?
J

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

What is a difference between MB01 and MBST for GR Cancellation

Hi,
What is a difference between MB01 and MBST for GR Cancellation.
Regards,
Aditya

Hi,
MB01 is used for doing the GR for collective PO at a single instance.
This transaction will be utilize when an individual needs to create a material document. A material document can only be displayed or changed after it has been generated in the SAP system. In a computer based inventory management system, the principal of "no posting without a document" applies. A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
As mentioned, when a goods movement is posted a material document is created. It serves as proof of the movement If the movement updates a G/L account; an accounting document is also created. The material and accounting document s are identified by unique document numbers
Once you have posted a goods movement, you cannot change material numbers, quantities or account numbers in the material document. You can however use the Change command to enter additional or change text information such as comments or references. To reverse the movement or change a quantity, a new transaction must be performed.
MBST:-
Perform this transaction when a previously performed goods issue must be cancelled due to an error in data entry or other circumstances deem the previous transaction unnecessary.
Prerequisites:-
A previously played transaction that requires cancellation.
An existing Material Document in SAP.
This Transaction will be utilized when an individual needs to cancel a material document due to a data entry error or other circumstances deem a previous transaction unnecessary. A material document can only be cancelled after it has been generated in the SAP system. A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
Performing this transaction will "undo" a previous transaction by reversing individual line items in a material document or by reversing an entire material document. This transaction will reinstate the affected cost center, purchase order or stock location to the state they were in prior to playing the original transaction.
Regards,
Archit

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

HI GalaxieMusique,
I'm french too, but I'm going to write this post in english so that everyone may understand it
I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
In regards with quicktime, you can download QuickTime 7 here:
http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
Sorry for the english, we french people can make mistakes sometimes
If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

Classification and counting of traffic vehicles in avi file

Hi
we are working on a project classification of vehicles and find out count in a avi file 30 sec duration using labview
the algorithm we try is back ground subtraction to dectect vehicle, count vehicles, find areas and classify
can we get a vi

This could be done using Vision Builder for Automated Inspection. If you are interested in it I would suggest looking at the product page found here. You can use this software to implement the algorithm you described in your post.
Cameron T
Applications Engineer
National Instruments

Differences between 7 and 8 for long books

I am considering FM 7 and 8 for producing a long book. The issue with 8 is that it requires SP2 on XP, and I can't put that on my writing system.
So that would favour 7 unless its features are noticably lacking compared to 8. Here are the book requirements, please read carefully --
* There are 4 parallel columns spread across 2 facing pages -- each column has its own text, layout, font and size, different from texts in other columns.
* All 4 columns in the spread (2 on even pages, 2 on odd pages) must retain their positions on the spread, no matter which page of the book you turn to.
* There is absolutely no left to right wrapping of columns in a parallel column layout. This means all columns flow down - even to even, and odd to odd.
* This page flow must be automatic -- I am simply NOT going to draw frames for all pages and manually link them across a 400 page book, it is absurd.
I need to know which one of 7 or 8 supports automatic wrapping of 2 columns on even pages to the next even page, and the two columns on the right odd pages to the next odd page (if you don't understand this requisite column flow, please leave it for other to reply who do -- thank you). If both FM 7 and 8 are more or less the same, that would be very helpful information too. Please give compative capabilities as it relates to parallel book columns.
BTW, another really crucial feature is being able to manually set a FIXED line height in each column -- not in point size, like InDesign does (that does not work for precise alignment) -- I should be able to specify the line height in each column in decimals of an inch. Which one can do this?
Your help on these specific questions is much appreciated. Please no discussion of FM 9. I will not be getting that version. Thanks

ScratchyBoy wrote:
Mike --
That weird work-around is indecipherable to me (column less than a character width??) -- would you care to explain it in the context of this thread?
I noticed that Arnis has already explained the reason for using a tiny frame in each thread to carry the flow across pages where you don't want to display that content.
The reason Jay posted that is because he was on my question in InDesign, realized the serious failing of InDesign to handle a 2-page spread of parallel columns, and obviously wanted to see if FM could do it. He did a book in FM with only 2 columns, hence the "entrenched" concept of even-to-odd page flow worked fine for him.
You know, I have personally read 100+ books with 4 parallel texts like I am describing, and I am sure there are thousands of ones I haven't read with a similar layout. It takes scarcely 2 seconds to realize, looking at the 2 page spread, that even page columns MUST wrap to even page columns, and odd to odd. It's not an "unusual, special" request, it is a NECESSARY REQUIREMENT of 4 parallel columns spread across facing pages. Surely you can see that? But it seems that Adobe developers either never read any scholarly texts, or they just don't understand parallel texts -- period.
Have you contacted the folks who created the books you're referring to, to learn what tools they used for the books? Just seeing the final print version, or even the PDF, can't reveal the underlying construction.
Maybe the truth came out in that thread. Framemaker, as it was originally conceived by the original developers, DID allow correct page flow for parallel columns -- but once Adobe got it, they killed that ability, dumbing it down to InDesign's level, which cannot do it. Peter so much as admitted to that fact on that thread, that somewhere in the versions, this feature was killed. Which confirms the above paragraph.
Winfried Ring responded to my question about the feature not working in later FrameMaker releases, in that other thread, that the technique still works in later FrameMaker releases. The key, Winfried pointed out, is to begin the document with one body page, regardless of whether it's a single-page or facing-page layout. This keeps FrameMaker from getting confused about where the flows should go on the new pages it creates as any of the flows grows to the point that it creates a new page.
I think you're trying to imagine how these techniques will work, rather than trying them out hands-on. I've done that myself; it's a good learning style for some things, but in this particular case, you need the empirical experience of seeing how the software's built-in mechanisms behave. Until and unless you do it and gain the experience, you can't imagine, project, empathize, conjure, or visualize how these things work. You do have a clear vision of what you want for the end result, however.
In FrameMaker, as in InDesign, as in PageMaker, as in QuarkXpress, you draw text frames on document pages, or on master pages, using a text frame tool. It's named differently in each application.
The tools are for users to apply their vision and creativity, so if you need a certain kind of layout, you need to lay it out yourself. If your particular layout were common, there would very likely be at least one template for available in each professional publishing tool's community.
Why should I even consider FM 9 ?? Adobe wants $1000 bucks for it -- they brag on its "improved features for book production". What a laugh! They can't even conceive of scholarly comparative books across a HUGE gamut of subject areas -- so why should I consider it ?? I'd love for someone to tell me: "YES !! I am proud to announce that FrameMaker can do this natively out of the box !! " But I don't see it coming, do you?
Professional tools cost huge money to develop. If you use them professionally, your work should bring in the revenue to pay for the tools.
As has been said by many posters on many threads in regards to most software, especially the professional tools, it's very unlikely that you'll find a legitimate copy of a past version for sale. The older the version, the less likely there will be a legit copy on some dealer's shelf that pops up, and is put on eBay for a song. It's illegal to sell old versions that one uses to upgrade to a new version. You'll not be able to register the license; in recent versions of Adobe products, you won't be able to use the software at all after the trial period expires, without a valid license.
Using a license cracking tool is also illegal.
It sounds as if your hardware and Windows version limitations are constraining your software choices. It's a tough set of choices.
Oh, BTW, here's a link to a PDF of a FrameMaker example of what I think you're talking about:
http://dl.dropbox.com/u/363247/fm%207X7%204-parallel%20flows%20across%20same-side%20pages. recover.pdf
EDIT:
In the PDF, the small fragments of text are the "pass-through" threaded frames that Arnis described. They're larger than a single character, so you can see the text flow through; in real use, they should be teensy.
/EDIT
It's trickier in InDesign because it's built-in ability to create new pages as stories grow is trick to accomplish the same behavior. The In-Tools plugin that was mentioned can do this.
If you're persnickety about typographic control, InDesign is the better tool. FrameMaker isn't a slouch, it's just that InDesign's been bred for the task.
Regarding lining up the text across columns, InDesign and FrameMaker both can control baseline alignment. You'll need to try out both tools to decide which works the way you need.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

No Audio and White screen for mpeg layer 3 Avi files

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled. The files still play using VLC but I would like to use quicktime pro. PLease help!

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

Quicktime version 7.1.3 for Mac cannot play AVI file

The AVI file actually "plays" as in, the bar moves, but there is just a white screen, and no sound. I have checked the movie info and it shows that the format is ", 640 x 360, Thousands MPEG Layer 3, Stereo, 44.100 kHz". I have totally no idea what that means, and why the file cannot play. It plays perfectly well on a Windows computer which shows that the file is not corrupted.
I have also followed the suggestion made in one of the earlier discussions and downloaded Perian. However, when I clicked on the "AppleIntermediateCodec.component" file, I only got a message that says "Error Opening Movie: The movie cannot be opened." So, Perian seems to be another dead-end for me.
Incidentally, I have also tried playing the AVI file with Windows Media Player for Mac. The message is that the file format is invalid.
Any suggestions as to how I can coax my Mac to play the AVI file?

The codec info should have been listed before the comma that precedes 640x360. Seems to be a bug in the recent versions of QT 7. If you have QT Pro you can still find the codec name by opening Movie Properties and checking the video format that way. Anyway, since Perian cant play it I suspect you are out of luck in MacOS x. Not all avi decompressors have been ported to OS X. It may be that the compressor is one of the old Indeo codecs and those definitely will not work in X. They will work in the Classic environment but a lot of you folks have given up on Classic. Just in case here is a link to the Indeo codecs for Classic: Indeo codecs for Classic
Have you tried playing it in VLC. If it is not an Indeo file VLC may play it.
The Mac version of WMP doesn't play avi or mpeg files -- mostly it plays wmv or asf files and not even the most recent versions of those formats.

Difference between MIGo and MIRO for GR IR clearing

Hi all,
I hav created one PO in foreign currency for 10 items. GR is happening for all 10 lines with rate say Rs 50. Now when i am doing MIRO with same rate i.e. Rs 50, 8 materials are getting posted correctly. But for 2 materials there is inventory posting for fixed amount (in local currency) irrespective of quantty.this case amount in foreign currency is same but dieefernce for GR/IR account is in local currency.
When line items analysed it was observed that fo these 2 materials exchange rate picked up is different than header exchange rate. the difference in exchange rate is posted to stock account.
In short system icking differen xchange rate for different line items for one invoice ( MIRO is happening against only one invoice)
Can any one please explai this phenomena and any solution for this?
thanks

When you do aut. clearing and the exchange rates account is set up it will clear the GR/IR account.
There is no reason to change exchange rates

Differences between AIX and Windows for SAP

Dear All,
I have a problem regarding SAP Software.We want to change our company software .First we order SAP On Windows with Oracle10g But Now We want SAP on AIX with Oracle10g.
SAP delivered us software on Windows platform.
Please Suggest me for this as what are the differences between the above two platforms and what are the differences between the above 2 platforms.
Regards,
Pankaj Kalsayan

hi Pankaj,
well, this is a very general question. perhaps you could specify a little more.
in general i would see no difference regarding the end user sitting in front of his pc using sapgui.
as far as i know all server side sap software is available for aix and windows (and many more).
for administration on the other hand there is of course lots of difference. AIX is a UNIX operating system running on special hardware with power processors. it offers quit extensive virtualisation abilities using so called LPARs and supports real big number of CPUs and large RAM. Windows is a completly differnet operating system running mostly on x86/amd64 hardware.
therefore you should also consider what know-how is available in your system administration.
not shure if that is partly answering your question ...
btw. if you are going forward with AIX you should perhaps consider switching oracle with db2. so you have a consistent IBM based landscape. also to me, sap and db2 seem to "like" each other more than sap and oracle
regards,
martin

Difference between LTS and lT for expression bulide

I am using the OBIEE 10g ,in the administration tools , can you tell me the difference between '...' button for expression bulide(Column Mapping) in the Logical Table Source and '...' button for expression bulide in the Logical Column ?
Thanks.
Edited by: kobe on Jan 8, 2012 10:00 PM

hai..
I wil tell you with example. In bmm layer, amount_sold is there and it is aggregated.Suppose, if you want to reuse that aggregated column, we cannot. At that time, create a new logical column ,goto-->expression builder-->select the logical fact table-->logical column(i.e,amount_sold).By doing this, we can reuse that amount_sold column.
Thanks,
:)

Differences between verizon and att for facetime?

any restrictions? wifi required for both?

yeah att wont let all its customers use facetime on 3g but verizon does. att is blocking all its customers that are not on a family share data plan so they cant use facetime on 3g !!!!!! do unfair att !!!!!!!!

What is the difference between sent and delivered for a text message?

This is my first smart phone and I am getting a notification after I send the text message that the message has been sent. Then I get a notification that the message has been delivered. I have requested read receipts enabled on the phone. Do these notifications pertain to that?

Delivered only works with someone that has Verizon. Sent means it was sent but you don't know if their phone is on or not.

Big difference between iMac and MacMini for a basic FCP usage?

Hi all,
the question is the one on the subject.
The comparison is between the:
- iMac 3.06Ghz 8GB 512vRam (the one on my signature here below)
- MacMini 2.4Ghz 8GB 256vRam
I would like to know if i will notice significant differencies in a basic usage of FCP: i mean a usage of FCP more like if it was FCExpress...

Thanks Tom, this is due to hardware limitations i suppose ?
There is some link/resource where i can read wich applications are compromised?
thanks again

Difference xMAM and xMAM for Utilities?

Hello!
I downloaded the latest Version of xMAM3.0 for Utilities (SR 1 Hotfix 01) from SWDC . Then I deployed the XMAU.sda file on the server and then on the client. However, I found out that the user interface doesn't look like the one from the xMAM3.0 and the whole mam functionality is missing. Does xMAM for Utilities incorporate the functionality of both MAU and MAM? What is the difference between xMAM and xMAM for utilities?
Is there any other SDA-file I need to deploy? (I didn't find any in the downloaded package).
Thanks for you support and best regards
Reinhard

Hi Reinhard,
MAU is MAM extended for utilities industry. It is built on top of MAM, includes all MAM functionality and provides some extra, utilities specific, features, for example, connect/disconnect orders, meter readings, etc..
The difference is backend you need: MAM's backend is standard R/3 backend while MAU requires Utilities industry backend.
MAM3.0 has two different versions: laptop/PDA. As far as I know at the moment MAU only built based on PDA version. That is why if you compare MAM3.0 laptop and MAU (PDA by default) you might think that these are different applications. They are not, functionlaity between PDA and laptop versions are completely the same, they share DB, business logic layers, only UI is different.
MAU build should include everything you need, you do NOT have to deploy MAM and then MAU.
Regards,
Larissa Limarova

Differences btween QTX and QT7Pro for trim & merge of avi files

Similar Messages

Maybe you are looking for