Differences in DTPs BI7 when compared to InfoPackages in BW3.x

Hi,
What better features are available in Data Transfer Process (DTPs) in BI7.0 when compared to InfoPackages in BW3.5?
Why SAP recommended you must use especially InfoPackage to load data to PSA/DS in BI7.0 why not in other places like to load PSA to DSO, InfoCube? What the best features are there in DTPs to load data?
What DTP type is recommended the most and why? Could anyone help me in this.
Thanks,
Reddy

Hi Reddy,
In 3.X infopackages are to upload data to psa and data targets.
In 7.0 now Infopackages are using to load data upto PSA only
DTP is to load data from One Bi object to Other Bi object
I.e Data source --> data target or Data Target --> data target
which replaces the DATA MART concept
we have 4 type of DTP
1. Standard DTP
2. DTP for Realtime data acquisition (RDA)
3. DTP for Direct data access(virtual provieders only)
4. Error DTP(if get any errors ,while loading data to the data targets)
Please refer these:
SAP Network Blog: SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / Blog Series
SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / Blog Series
'Error DTP' - BI@2004s
SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / The Normal DTP ...
How-To write DTP dependant mapping/routines within the same Transformation
SAP NetWeaver 7.0 BI: Get runtime information of a Data Transfer Process (DTP) in a Transformation
SAP NetWeaver 7.0 BI: Extended Capabilities to Debug a Data Transfer Process (DTP) Request
SAP NetWeaver 7.0 BI: Data Transfer Process with Get Data by Request
SAP NetWeaver 7.0 BI: Data Transfer Process with Only get Delta Once
refer these links also :
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
hope this will help you.....
Thanks
chandra sekhar
Edited by: chandra sekhar on Nov 2, 2008 7:31 AM

Similar Messages

I can't seem to get individual elements when comparing 2 arrays using Compare-Object

My backup software keeps track of servers with issues using a 30 day rolling log, which it emails to me once a week in CSV format. What I want to do is create a master list of servers, then compare that master list against the new weekly lists to identify
servers that are not in the master list, and vice versa. That way I know what servers are new problem and which ones are pre-existing and which ones dropped off the master list. At the bottom is the entire code for the project. I know it's a bit much
but I want to provide all the information, hopefully making it easier for you to help me :)
Right now the part I am working on is in the Compare-NewAgainstMaster function, beginning on line 93. After putting one more (fake) server in the master file, the output I get looks like this
Total entries (arrMasterServers): 245
Total entries (arrNewServers): 244
Comparing new against master
There are 1 differences.
InputObject SideIndicator
@{Agent= Virtual Server in vCenterServer; Backupse... <=
What I am trying to get is just the name of the server, which should be $arrDifferent[0] or possibly $arrDifferent.Client. Once I have the name(s) of the servers that are different, then I can do stuff with that. So either I am not accessing the array
right, building the array right, or using Compare-Object correctly.
Thank you!
Sample opening lines from the report
" CommCells > myComCellServer (Reports) >"
" myComCellServer -"
" 30 day SLA"
CommCell Details
" Client"," Agent"," Instance"," Backupset"," Subclient"," Reason"," Last Job Id"," Last Job End"," Last Job Status"
" myServerA"," vCenterServer"," VMware"," defaultBackupSet"," default"," No Job within SLA Period"," 496223"," Nov 17, 2014"," Killed"
" myServerB"," Oracle Database"," myDataBase"," default"," default"," No Job within SLA Period"," 0"," N/A"," N/A"
Entire script
# things to add
# what date was server entered in list
# how many days has server been on list
# add temp.status = pre-existing, new, removed from list
# copy sla_master before making changes. Copy to archive folder, automate rolling 90 days?
## 20150114 Created script ##
#declare global variables
$global:arrNewServers = @()
$global:arrMasterServers = @()
$global:countNewServers = 1
function Get-NewServers
Param($path)
Write-Host "Since we're skipping the 1st 6 lines, create test to check for opening lines of report from CommVault."
write-host "If not original report, break out of script"
Write-Host ""
#skip 5 to include headers, 6 for no headers
(Get-Content -path $path | Select-Object -Skip 6) | Set-Content $path
$sourceNewServers = get-content -path $path
$global:countNewServers = 1
foreach ($line in $sourceNewServers)
#declare array to hold object temporarily
$temp = @{}
$tempLine = $line.Split(",")
#get and assign values
$temp.Client = $tempLine[0].Substring(2, $tempLine[0].Length-3)
$temp.Agent = $tempLine[1].Substring(2, $tempLine[1].Length-3)
$temp.Backupset = $tempLine[3].Substring(2, $tempLine[3].Length-3)
$temp.Reason = $tempLine[5].Substring(2, $tempLine[5].Length-3)
#write temp object to array
$global:arrNewServers += New-Object -TypeName psobject -Property $temp
#increment counter
$global:countNewServers ++
Write-Host ""
$exportYN = Read-Host "Do you want to export new servers to new master list?"
$exportYN = $exportYN.ToUpper()
if ($exportYN -eq "Y")
$exportPath = Read-Host "Enter full path to export to"
Write-Host "Exporting to $($exportPath)"
foreach ($server in $arrNewServers)
$newtext = $Server.Client + ", " + $Server.Agent + ", " + $Server.Backupset + ", " + $Server.Reason
Add-Content -Path $exportPath -Value $newtext
function Get-MasterServers
Param($path)
$sourceMaster = get-content -path $path
$global:countMasterServers = 1
foreach ($line in $sourceMaster)
#declare array to hold object temporarily
$temp = @{}
$tempLine = $line.Split(",")
#get and assign values
$temp.Client = $tempLine[0]
$temp.Agent = $tempLine[1]
$temp.Backupset = $tempLine[2]
$temp.Reason = $tempLine[3]
#write temp object to array
$global:arrMasterServers += New-Object -TypeName psobject -Property $temp
#increment counter
$global:countMasterServers ++
function Compare-NewAgainstMaster
Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
Write-Host "Total entries (arrNewServers): $($countNewServers)"
Write-Host "Comparing new against master"
#Compare-Object $arrMasterServers $arrNewServers
$arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
Write-Host "There are $($arrDifferent.Count) differences."
foreach ($item in $arrDifferent)
$item
## BEGIN CODE ##
cls
$getMasterServersYN = Read-Host "Do you want to get master servers?"
$getMasterServersYN = $getMasterServersYN.ToUpper()
if ($getMasterServersYN -eq "Y")
$filePathMaster = Read-Host "Enter full path and file name to master server list"
$temp = Test-Path $filePathMaster
if ($temp -eq $false)
Read-Host "File not found ($($filePathMaster)), press any key to exit script"
exit
Get-MasterServers -path $filePathMaster
$getNewServersYN = Read-Host "Do you want to get new servers?"
$getNewServersYN = $getNewServersYN.ToUpper()
if ($getNewServersYN -eq "Y")
$filePathNewServers = Read-Host "Enter full path and file name to new server list"
$temp = Test-Path $filePathNewServers
if ($temp -eq $false)
Read-Host "File not found ($($filePath)), press any key to exit script"
exit
Get-NewServers -path $filePathNewServers
#$global:arrNewServers | format-table client, agent, backupset, reason -AutoSize
#Write-Host ""
#Write-Host "Total entries (arrNewServers): $($countNewServers)"
#Write-Host ""
#$global:arrMasterServers | format-table client, agent, backupset, reason -AutoSize
#Write-Host ""
#Write-Host "Total entries (arrMasterServers): $($countMasterServers)"
#Write-Host ""
Compare-NewAgainstMaster

do not do this:
$arrDifferent = @(Compare-Object $arrMasterServers $arrNewServers)
Try this:
$arrDifferent = Compare-Object $arrMasterServers $arrNewServers -PassThru
¯\_(ツ)_/¯
This is what made the difference. I guess you don't have to declare arrDifferent as an array, it is automatically created as an array when Compare-Object runs and fills it with the results of the compare operation. I'll look at that "pass thru" option
in a little more detail. Thank you very much!
Yes - this is the way PowerShell works. You do not need to write so much code once you understand what PS can and is doing.
¯\_(ツ)_/¯

What are the advantage of using Oracle Database when compare to SQL SERVER

Hi all
Please tell anyone about
what are the advantage of using Oracle Database when compare to SQL SERVER
Thanks in advance
Balamurugan S

user12842738 wrote:
Hi,
There are various differences between the two.
1. SQL Server is only Windows, but Oracle runs on almost all Platforms.
2. You can have multiple databases in SQL Server, but Oracle provides you only one database per instance.Given that the very term 'database' has s different meaning in the two products, this "difference" is absolutely meaningless.
3. SQL Server provides T-SQL for writing programs, whereas Oracle provides PL/SQLWhich means what? Both products have a procedural programming language. They named them differently, and the languages are not interchangeable. Means nothing in comparing the features/strengths/weaknesses/suitability to purpose.
4. Backup types in both are the same. (Except Oracle provides an additional backup called Logical Backup.)You make that sound like "Logical Backup" is something more than it is. It is nothing more than an export of the data and metadata. Many experts don't even consider it a backup. I'm sure SQL Server provides the same functionality though they probably call it by some other name.
5. Both provide High Availability.Well, I guess they both have a suite of features they refer to as "High Availability". But what does that really mean? The devil is in the details. Remember, the two products don't even agree on what constitutes a "database".
6. Both come in various distributions.???
>
If you are going for an Implementation, you can try SQL Server Express Edition and Oracle XE which are free to use.
Then you can choose whichever is comfortable for your needs.
Thanks.

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Data in the cube is showing wrong when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
<b>Here is the ODS Code:</b>
tables: /BI0/PPRODORDER.
loop at data_package.
    select single COORD_TYPE
                  PRODVERS
      into (/BI0/PPRODORDER-COORD_TYPE,
            /BI0/PPRODORDER-PRODVERS)
      from /BI0/PPRODORDER
     where PRODORDER = data_package-PRODORDER
       and OBJVERS   = 'A'.
    if sy-subrc = 0.
      if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
      or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
        data_package-PRODVERS = space.
      else.
        data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
      endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
      if data_package-TGTCONSQTY NE 0.
        data_package-calday = data_package-ACTRELDATE.
      endif.
    endif.
    modify data_package.
endloop.
<b>Here is Cube Code:</b>
tables: /BI0/PPRODORDER,
           /BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
    material                 TYPE /bi0/oimaterial,
    mat_unit                 TYPE /bi0/oimat_unit,
    numerator                TYPE /bi0/oinumerator,
    denomintr                TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
    l_s_mat_unit             TYPE ys_mat_unit,
    e_factor                 type p decimals 5.
loop at data_package.
    select single COORD_TYPE
                  PRODVERS
      into (/BI0/PPRODORDER-COORD_TYPE,
            /BI0/PPRODORDER-PRODVERS)
      from /BI0/PPRODORDER
     where PRODORDER = data_package-PRODORDER
       and OBJVERS   = 'A'.
    if sy-subrc = 0.
      if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
      or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
        data_package-PRODVERS = space.
      else.
        data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
      endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
      if data_package-TGTCONSQTY NE 0.
        data_package-calday = data_package-ACTRELDATE.
      endif.
    endif.
    data_package-agsu     = 'GSU'.
    data_package-agsu_qty = 0.
    select single gr_qty
                  base_uom
      into (/BIC/ODS-gr_qty,
            /BIC/ODS-base_uom)
      from /BIC/ODS
     where prodorder = data_package-prodorder
       and material = data_package-material.
    if sy-subrc = 0.
      if /BIC/ODS-base_uom = 'GSU'.
        data_package-agsu_qty = /BIC/ODS-gr_qty.
      else.
        SELECT SINGLE * FROM /bi0/pmat_unit
          INTO CORRESPONDING FIELDS OF l_s_mat_unit
          WHERE material   = data_package-material
            AND mat_unit   = 'GSU'
            AND objvers    = 'A'.
        IF sy-subrc = 0.
          IF l_s_mat_unit-denomintr <> 0.
            e_factor = l_s_mat_unit-denomintr /
                          l_s_mat_unit-numerator.
            multiply /BIC/ODS-gr_qty by e_factor.
            data_package-agsu_qty = /BIC/ODS-gr_qty.
          ENDIF.
        else.
          CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
            EXPORTING
              INPUT                = /BIC/ODS-gr_qty
              NO_TYPE_CHECK        = 'X'
              ROUND_SIGN           = ' '
              UNIT_IN              = /BIC/ODS-base_uom
              UNIT_OUT             = 'GSU'
            IMPORTING
              OUTPUT               = DATA_PACKAGE-gsu_qty
            EXCEPTIONS
              CONVERSION_NOT_FOUND = 1
              DIVISION_BY_ZERO     = 2
              INPUT_INVALID        = 3
              OUTPUT_INVALID       = 4
              OVERFLOW             = 5
              TYPE_INVALID         = 6
              UNITS_MISSING        = 7
              UNIT_IN_NOT_FOUND    = 8
              UNIT_OUT_NOT_FOUND   = 9
              OTHERS               = 10.
        endif.
      endif.
    endif.
    modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi,
May be you might want to look into the way the % is being calculated in the cube. If the formula involves counting the no. of records, then you will also be counting the -ve records that are posted in the cube unless you have had a compression on the cube. that might give you wrong numbers.
Doniv

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

I do not have many messages but my iphone 5s says messages take up 4.6GB of space. When comparing with friends who have many more message, less than 1 GB is being used on their phones. Why are mine taking up so much space and how do I correct that?

I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space. When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages. Why are mine taking up so much space??

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

Advantages of using labview in embedded application when compared to c ?

Hello all,
I am looking to develop embedded application with help of labview programming
Started with Lm3s8962 evaluation board.
So i would like to know
1 Advantages of using labview in embedded application when compared to c ?
2 Can we deploy the code in any kind of controller by writting drivers for it ?

hello, the LM3S8962 microcontroller is a good sispositivos for developing applications of medium complexity, according to your questions:
1. if you work applications with embedded systems will save labview time in prototyping, we know that if you work with a company specific microcontroller, you must learn the language with which you are working Asm, Basic, C, then if you change hardware again start adapting your code in the libraries of the new compiler. Labview does not happen.
2. Labview only works with some microcontroller manufacturers and specific models.
Atom
Certified LabVIEW Associate Developer

Features available in PI 7.11 when compare with PI 7.1

Hi Experts,
What are the extra features available in PI 7.11 when compare with PI 7.1. What are the monitoring techniques added in 7.11.
Regards,

search in sdn before posting.
http://wiki.sdn.sap.com/wiki/display/XI/PI7.1EHP1DeltaFeaturesoverPI+7.1
Regards,
Raj

Why poor quality AIC & Apple ProRes HQ video when compared to original video files!

First, I'm a long time PC user who has recently switched to Mac's and I'm rather picky about the quality of my videos.
Problem: I have HD video from a Canon HF S10 camcorder and Canon EOS 7D that looks fantastic on a PC... but looks very so-so once imported into a iMovie or FCE or FCP. I've tried all three programs using AIC and yes I've even tried Apple Pro Res HQ (FCP 7.0 log & transfer) and still end up with very poor quality mov files when compared to the originals. Part of the problem (or benefit of a PC) is that the PC actually plays the original RAW MTS/M2TS/MOV files without any trouble and and they look unbelievable. Where as my Mac has to import/convert the file to AIC or Apple Pro Res HQ... so no matter what codec I use, my Mac produces video that is not even close to what I get out of my PC.
My original RAW files are all 1920x1080 60i and are MTS files from the HF S10 and Mov files from the 7D. Even the original RAW Mov files produced from the 7D don't look as good on my Mac as they do on my PC. I even took a SD card with the original files down to the local Apple store to see how they look on a Macbook Pro and they still don't look like the originals on my PC. Also, all my comparisons are being done side by side on two 24" Apple cinema displays at full size (1920x1080) that are calibrated. What am I doing wrong and why the loss in quality? Any ideas as to why the quality is just so-so when compared to the originals would be greatly appreciated. Thanks in advance.

The thing that is wrong is that you are judging the quality of VIDEO on COMPUTER monitors. Properly calibrated or no...this is not how you do it. Calibration for computer monitors sets them right for PHOTOSHOP and color, not VIDEO and proper monitoring. Only getting a signal to a broadcast VIDEO monitor, or HDTV, will show you what you really have. And for that you need an HD input/output device or capture card...and the HDTV or HD monitor.
Computer monitors are never the place to judge video quality. Resolution is typically lowered to allow for full frame playback. Even if paused.
Shane

Advantages of BW Query in SAP Portal when compared to WEB BEx Analyzer

Hi
What are the advantages of having a BW Query in SAP Portal when compared to WEB BEx Analyzer
I had to presention to higher managers of having a SAPPortal for BW report that WEB BEx Analyzer
can any one please update me with few points (10-20) that will be useful for my presentation
screen to geethikakrishna->gmail
Thanks in advance

Hi Krishna ,
I think you should highlight the portal role in presentation
Now a days all organizations using sap portal as their user interface. We can login portal once and we can get all the information from bw,crm...sap systems and non sap systems.
so no need to login each and every system individually.
The portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
For all information on portals refer to help.sap.com->documentation->netweaver->Netweaver2004->English
IN people integration you will find information on portals
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
check below threads for some information
easiest way to publish
Easiest way to post existing BW queries onto portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
Execution of BW Reports Through Enterprise Portal
Best Practices for BI Report publishing on Portal - BI 7
Use of BI's Enterprise Portal
The web application designer offers rich functionality for creating dashboards. In SAP NetWeaver BI 2004s (aka 7.0), when you publish a template it is automatically created as an iView for the portal.
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Koti Reddy

J2IUN is of less amount when compared to their payable GL's of BED, ECS a

Dear gurus,
For the month J2IUN amount less when compared to their payable GL's of BED, ECS.SECS.what is the resons for this and
Possible solution for the above.
Thanks
Venky

Correct, there is really no plan they offer that is uncapped just like they told you. The cell network data solutions are not meant to be used for home internet but to be something that is used occasionally for someone who needs mobile internet. And right again, congestion is one of the biggest problems LTE has caused for VZW Nashville, DC, Portland, Silicon Valley...

What is the use of jsp when compare with Struts

what is the use of jsp when compare with Struts

JSP Tag Libraries are great for reusable content formatting and ligic.
For example, let's say you have this Shopping site. Each item you sell is stored in a database, and you get them out depending on Catagories, creating a List of ItemBeans. You allways want to display the items with a catagory header, then a <table> with the item number, the description and the price.
Instead of creating a bunch of logic in the JSP that does this, you can pass it on to a Tag that might look like this in your JSP:
<shopping:itemTable catagory="${selectedCatagory}" items="${itemsForCatagory}" />
This would make the JSP easier to read and work with.
The actual uses are incredible. Have you used the <jsp:useBean ...> tag? That is an example of a use of the Custom Tag Libraries.
Furthermore, look into JSTL (JSP Standard Tag Libraries). They are a collection of tags (API by Sun, coding by Apache) used to do many of the standard actions you might want/need to do in JSPs, like a conditional tag (c:if only do something if the test is true), multiple-conditional tags (c:choos c:when c:otherwise) like an if [else if] else construct. Looping through an array or Collection (c:forEach), storeing values in scopes (c:set) formating numbers and dates (the fmt library), xml transformations (xml library), and lots of other things that you could replace scriptlet code with.

Content server pros and cons when compared to others

Hi DMS Gurus,
we are in a process of deciding which storage area to go for, and the client is kneen on going for a common existing server, as he is not kneen on spending on DMS content server.
my question are,
can we transform any existing file server or system (which is already in use) in to a content server just by installing windows 2003, and content server CDs. if so please tell me how to go about this.
is content server only the preferred storage to process the original files in through WEB DMS, or will Starage in SAP Database,Vault or Archive also will give this funtionality.
let me please know what are the major Pros (benifits) and cons (demerits) which Content server storage gives when compared to other storage.
Points for sure,
thanks in advance
Shanti

Shanti,
ArchiveLink:
You use SAP ArchiveLink as a communication interface between the document management system and the archiving systems. You can display the archived data using the SAP ArchiveLink viewer. Many times there are documents generated which needs to be tied to a DIR and hence you use the archive link to tie these to a transaction and the originals can be stored in the content server.
KPRO
KPRO apart from attaching the originals, it provides a wide range of other functionalities like content service,
where after every check in& checkout of DIR you can mantain the working copies in the content server.
Knowledge Provider is a component of SAP Web Application Server and provides the general infrastructure for storing and administrating documents.The Content Server and the Cache Server are server components that interact with the Knowledge Provider
Knowledge Provider provides the following services:
-Services for KPro client applications
-Document Management Framework (DMF)
-Document Management Service (DMS)
-Content Management Service (CMS)
-Integration of content servers and cache servers
-Content Server
-Allows you to integrate SAP Content Sever or
external content servers
-Cache Server
-Allows you to store documents close to the client (caching)
-Content Modeling Tool
-Document Modeling Workbench (DMWB)
Hope this helps
Paddy

Adobe XI Pro trial verison, when compared two pdf files it gives error "Expected a Name Object"..Can some one say how to fix this?

Installed Adobe XI Pro trial verison, when compared two pdf files it gives error "Expected a Name Object"..Can some one say how to fix this?

Installed Adobe XI Pro trial verison, when compared two pdf files it gives error "Expected a Name Object"..Can some one say how to fix this?

Differences in DTPs BI7 when compared to InfoPackages in BW3.x

Similar Messages

Maybe you are looking for