Differences in MTU Configuration Between IOS and IOS-XR

Hi all,
If you're interested in this topic, you can now check document I posted in Service Provider section.
Please let me know if you have any doubts.
Thanks,
Milivoje

Thanks Andrew. The format is correct but only fills about half the screen. Big black borders on all 4 sides. On my ios 6 ipad it starts a video the same way but the i can do a reverse pinch and it will send the signal to the tv in full screen. Same format just bigger. It just doesn't work since i upgraded one ipad to ios7. Still works fine on the one i haven't upgraded.

Similar Messages

Difference in the Balance between FS10N and Customer Balances in Local Curr

Hi,
When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
What could be the possible reasons for the differences..
Thanks

Hi Varshani,
Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
SAPF070 - Compare Documents and Account Transaction Figures
Description
This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
Output
The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
Description
If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
Requirements
All of the following listed requirements must be fulfilled:
1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
It is advisable to execute a test run first, which will list any differences that are found.
Further notes - Authorizations
Repair program authorization group (F_005)
Company code authorization (F_BKPF_BUK)
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

Differences in sort order between iTunes and iPod

Can someone explain how the sort order of artists / albums works? It seems that it is different between iTunes and the iPod. In iTunes (7.3.1) I can enter data in the fields for Artist, Album Artist, Sort Artist and Sort Album Artist. When I get the tracks to appear in the order I want in iTunes, it doesn’t seem to transfer across to my iPod. I know there are some differences in how the sort order works in both, but how is it different?
John.
Dell 5150 Windows XP

ou must have an older iPod.
I believe the new sort order only works on the new iPods (Nano and Video)

Difference in PL/SQL between 8i and 9i

Hi
Where can I find the exact differences in PL/SQL alone between 8i and 9i from developers point of view.
I appreciate your help
Thanks

Well, you would find it at the most obvious place - The Oracle documentation, where else?
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/whatsnew.htm#967650

ALE configuration Between HR and FI system

Dear All,
We have HR system on ECC6 and FI system on 4.x version,
i have to do ALE configuration between these two systems , please guide me what bapi's , idocs and what background jobs i need to run on FI system or HR system
please advise at the earliest.
Regards,
Najeeb ..

http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAIS/CABFAIS.pdf

Difference in event handling between Java and Java API

could anyone list the differences between Java and java-API in event handling??
thanks,
cheers,
Hiru

the event handling mechanisms in java language
features and API (java Application Programming
Features)features .no library can work without a
language and no language has event handling built in.
I am trying to compare and contrast the event
handling mechanisms in the language and library
combinations such as java/ java API.
all contributions are welcome!
thanks
cheersSorry, I'm still not getting it. I know what Java is, and I know what I think of when I hear API. (Application Programming Interface.) The API is the aggregation of all the classes and methods you can call in Java. If we agree on that, then the event handling mechanisms in Java and its API are one and the same.
So what do you want to know?
%

ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Synching configuration between ECC and GTS

Is there any way we can automatically synch configuration (e.g.countries, regions) from ECC to GTS?
Thanks in advance.

Transaction SCU0 lets you compare configuration between systems, based on a number of ways of selecting the items to compare.
I am not sure if it offers any way to build a transport of the differences, or remotely update the target system. At least it lets you know what is different.
Andrew

Difference in text rendering between PDF and Mars?

I was doing some testing with Mars and stumbled upon what
seemed like suboptimal text rendering. Because it was quite subtle
and I wanted to make sure there was an actual difference, I did a
little comparison between PDF and Mars rendering.
See this image. Can
you see a difference?
I'm still not sure whether there is an actual difference, but
I still somehow got the impression that the upper example (PDF) is
a little more polished then the lower one (Mars). Are different
rendering paths actually used? Will it remain that way?
My SVG for Mars was very simple:
<text font-size="10pt" x="20" y="20" fill="rgb(0,0,0)"
font-family="F0">aex</text>
The PDF was produced with MS Office 2007 and Microsofts Save
as PDF plugin (also at 10pts). The font is Gentium.

The difference *IS* subtle, but you're right -- there does
appear to be a perceptible difference between the two samples.
Without making an in-depth study, it's hard to say whether we
can do anything about this. Even though they're both opened in
Acrobat, the rendering path for a Mars document is *VERY* different
from the path for a PDF document, and many of the events along the
chain are out of the control of those of us writing the Mars
plugin. There are some text-quality issues that I'd like to take
care of in time for our next release, however; perhaps I'll be able
to address this particular issue at the same time.

Patch Issues on JMS bridges configuration between OSM and AIA

Hi,
As mentioned in the OSM AIA Order to activate cartridge guide, we want confirm whether the below private patch is mantatory to create the JMS bridge between OSM and AIA.
Your Oracle Support ID is not sufficient to obtain the private patch. You will need the
following credentials to access it.
Patch identifier: 4CFJ
What will be the outcome if we doesn't install the above mentioned patch.
Regards,
Murali

Hi Murali,
I would encourage you to use the Oracle Community (via the My Oracle Support) for questions related to patches. Please post your question in the community and I will be happy to assist you.
- Deep
(OSM Product Management)

SSL Connection Configuration between Apache and Weblogic 8,1

I'm currently using Apache web server as a front end server for Weblogic server 8.1 and now i' facing some configuration problem to setting up the SSL connection between this 2 server. When i open my web application page, it shows
Failure of Server Apache bridge
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
and my proxy.log shows:
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL is configured
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL configured successfully
Thu Nov 03 09:36:41 2011 <182413202842013> Using Uri /favicon.ico
Thu Nov 03 09:36:41 2011 <182413202842013> After trimming path: '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> The final request string is '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> SEARCHING id=[ebwdsk298.ebworx.com:7002] from current ID=[ebwdsk298.ebworx.com:7002]
Thu Nov 03 09:36:41 2011 <182413202842013> The two ids matched
Thu Nov 03 09:36:41 2011 <182413202842013> @@@FOUND...id=[ebwdsk298.ebworx.com:7002], server_name=[10.122.50.218], server_port=[80]
Thu Nov 03 09:36:41 2011 <182413202842013> attempt #0 out of a max of 5
Thu Nov 03 09:36:41 2011 <182413202842013> general list: trying connect to '10.122.50.48'/7002/7002 at line 2696 for '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> New SSL URL: match = 0 oid = 22
Thu Nov 03 09:36:41 2011 <182413202842013> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Nov 03 09:36:41 2011 <182413202842013> EINPROGRESS in connect() - selecting
Thu Nov 03 09:36:41 2011 <182413202842013> Setting peerID for new SSL connection
Thu Nov 03 09:36:41 2011 <182413202842013> 0a7a 3230 5a1b 0000 .z20Z...
Thu Nov 03 09:36:41 2011 <182413202842013> Local Port of the socket is 2121
Thu Nov 03 09:36:41 2011 <182413202842013> Remote Host 10.122.50.48 Remote Port 7002
Thu Nov 03 09:36:41 2011 <182413202842013> general list: created a new connection to '10.122.50.48'/7002 for '/favicon.ico', Local port:2121
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Connection]=[keep-alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> URL::sendHeaders(): meth='GET' file='/favicon.ico' protocol='HTTP/1.1'
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-Forwarded-For]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: No session match found
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: No CA was trusted, validation failed
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: DeleteSessionCallback
Thu Nov 03 09:36:41 2011 <182413202842013> ERROR: SSLWrite failed
Thu Nov 03 09:36:41 2011 <182413202842013> SEND failed (ret=-1) at 789 of file ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 790 of ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> Marking 10.122.50.48:7002 as bad
Thu Nov 03 09:36:41 2011 <182413202842013> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 790 of ../nsapi/URL.cpp]: at line 3078
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Closing SSL context
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Error after SSLClose, socket may already have been closed by peer
Thu Nov 03 09:36:41 2011 <182413202842013> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
Can anyone tell me what should i do in order to correct this error? Your help is kindly appreciate!!! Please~

1) Is the managed server up?
2) from apache server are you able to bind the managed server port?
3) can you pls send the weblogic ssl configuration?

Differences in "storage used" between iPad and iTunes

I have an iPad Mini 2 and there a differences between the stated "storage used" between the iPad and iTunes.
Looking in the general settings "Storage" it states I have used 113GB and available is 413MB.
Looking on iTunes, when the iPad is connected, it states I have 67.20GB free.
Which is correct and what causes the problem?
How is it fixed if it is because the iPad has a fault?
Many thanks.

It is now a couple of weeks and noticed the discrepancy occurring again. I did not want to go through the above process again because it took about 4 hours to get my iPad up, running again and normal.
Again, there was a difference in memory by about 20GB.
This time it tried something different.
1) Went into General settings on iPad and managed memory. From here I removed all films and TV episodes. Now Video memory was zero.
2) Switched off WiFi. When I opened the Video app, I noticed a pile of films and TV episodes showing, even though they had the cloud icon. They could even be watched. I deleted these films/episodes.
3) Viewed the iPad memory using iTunes on laptop and compared to iPad general settings usage (video memory negligible). Both numbers pretty much spot on.
My musings - I can only assume that the iPad does not properly delete films/episodes that I had previously watched. It is evidently holding on to the video, even though I had deleted them and they were not showing in general settings. Though it is a hassle, I at least now how to find where the "lost" memory is and how to reclaim it.

Difference in WS performance between Search and Retrieve operations?

All,
We are currently working on a new repository and planning to use MDM webservices on top of that repository for searching and retrieving the data.
Now I'm curious about the difference in performance between the Search and the Retrieve operations and also within the Retrieve operation, between the different identification methods (internal ID, auto ID, remote key, unique field and display field).
Because in the webservices guide is stated that the identification methods are listed in order of best performance, but what are these performance differences between these methods (e.g. a retrieve on internal ID is x times faster than a retrieve on remote key which on his turn is x times faster than a retrieve on display fields which on his turn is x times faster than a search operation on same display field).
Of course the performance depends on lot of other things as well, but I just want to get a feeling on the performance related to eachother (keeping all other variables that can influence the performance the same!)!
I hope that any of you has experiences with all possibilities and can share performance measurements between the different operations related to eachother. Thanks in advance.
Regards,
Marcel Herber

Hi,
Did you implment Webservices in your site.
We are also having a similar scenarion where we have to serach a Records in MDM from SAP PI based on the certain criteria. I am concerned about the SAP MDM performance , since we are having heavy amount data being loaded every 30 minutes.
Please let me know the performace aspects of using Webservices.
Thanks
Ganesh Kotti

Voice over ip configuration between 2600 and 1700 routers

Hi,
I have the following set up:
2 offices with full T1 to the internet; one using a cisco 2600 router with FXS cards and the other using a 1700 router with FXS cards as well. I was asked to configure VOIP between the two sites and the PBX tech gave me at each office trunks which I connected to the FXS interfaces. The goal will be that the PBX guy be able to program the PBX with extension numbers of his choice and get the calls between the offices using the internet connection. I do not have a lot of experience setting up VOIP and I wonder if someone out there might have a similar environment.
According to the PBX tech, this trunk lines are loop start.
Thanks in advance for any ideas,
Uriel Naranjo.

It should be fairly straight forward. On the 2600 you will need to configure a voip dial-peer pointing to the remote site and pots dial peer to terminate a call on to the 2600 and you do the same on the 1700.
Check out the sample configurations on the following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca621.html#5593
disregard the rsvp portion and just simply configure your routers to pass voip traffic. You can do QoS later depending on the load and traffic.

Difference of JDK version between sharing and non-sharing

Hi,
Here, I got two version of JDK 1.6 as below:
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode)
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode, sharing)
What's the difference between them? Where can I download the non-sharing one?(actually, the non-sharing version now I got, is somebody gave me, he can't remember where he got it)
I know the sharing version can speed up the loading process, but the problem I met has nothing concerning about this.
My application is to read data from some xml files, and to import them into database. But the performance of using these two version of JDK is so different. Using the non-sharing version could be pretty much 10 times faster than the sharing one. Even if I turn off the switch of sharing by using -Xshare:off, I still couldn't get help.
Someone cool guy can help me here? Thanks!

I don't personally have much experience relinking across platforms. (We use Windows servers although I use Mac locally.) But, here's what info I can provide:
File paths in InDesign can be specified in 2 ways. One is platform-specific paths, and the second is URI notation. The URI notation is the same cross-platform, but even so, I imagine the volume names are different as well. Specifying the URIs in an InDesign file would prove to be challenging as well, although you can easily specify it in an IDML file.
Another avenue to explore would be to specify relative paths. By default InDesign writes absolute paths, but relative paths are supported. If I'm not mistaken, that's what the InDesign package functionality does.
Your best bet will probably be to run a script when the document loads on the machine for the first time and loop through all the links and change the paths to the correct location.
HTH,
Harbs

Differences in MTU Configuration Between IOS and IOS-XR

Similar Messages

Maybe you are looking for