Differences in Receipt Dates.
Hello all,
i am running into an issue where when running /sapapo/ccr for planned orders, i am getting lots of "Differences in Content" errors in regards to planned orders. In a lot of the cases the Receipt Dates for the R/3 order is 1:29:59 ahead of the Receipt date that is posted in APO. I have two options to try and reconcile the difference, but neither of them seem to be doing anything. I also have some instances where the dates are off by a few hours (normally less then 6). I am at a loss for why this is happening.
any suggestions or insights?
thanks,
I would rate this to be master data issue. can you check the scheduling times (production leadtimes + other associated schduling relevant leadtimes) are consistent in both APO and R/3. If not then planned orders that gets CIFed across to APO will use the master data in that system for deciding the receipt times and dates. I would also recommend you to check for OSS notes in this regard.
Similar Messages
-
Mixing materials with different Goods Receipt date in the same Storage Unit
Hello everybody,
I´d like to know how FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your helpHi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel -
Hi
I need to calculate difference between invoice clearing date and good receipt date.Anyone know any datasources that contains those field? if there is no datasource like i am looking for how can i do this ?
I am using 0FIAP_O03 ods and 0FI_AP_4 datasource which contains clearing date and some fields releated to invoice.Also i know there is a ods 0PUR_O01 and datasource 2lis_02_sgr contains good receipt date.Is it possible to create multiprovider using 0PUR_O01 and 0FIAP_O03 ?
ThanksHi
Have you tried infoset query in BW.
You can join ODS and a table or ODS and cubes in the infoset joins i
0FI_AP_4- LIFNR- 0CREDITOR
2lis_02_sgr- LIFNR- 0VENDOR
Common field you requested you can use them to join and get the results you want
Regards
N Ganesh
Regards
N Ganesh
Regards
N Ganesh -
How to build a difference between to dates
Hi @All,
Hope you can help me :) ..
I'd like to build the "difference" between two dates (e.g. date of the invoice and date of the payment receipt). As the result I expect an Integer.
I tried several functions and operations, but still get the error code: [nQSError: 22023] An arithmetic operation is being carried out on a non-numeric type.
I also tried to cast the date format into an Integer or double, but I still get an error ...
Here is my code:
CASE WHEN "2_Forderungsstruktur_Fälligkeiten".DIM_DATUM_FAELLIGKEIT.DDAT_DATUM_DE < 0
THEN NULL
ELSE
"2_Forderungsstruktur_Fälligkeiten".DIM_DATUM.DDAT_DATUM_DE - "2_Forderungsstruktur_Fälligkeiten".DIM_DATUM_FAELLIGKEIT.DDAT_DATUM_DE
END
Hope you guys have some good ideas to solve these problem :)
best regards
Matthi,
TIMESTAMPDIFF(SQL_TSI_MONTH,"Dim - Time"."Date",CURRENT_DATE)
"Dim - Time"."Date"--->Column1
Current_date--->Column2
thanks,
saichand -
Difference between Document date & Posting date
Dear Gurus
KIndly clarify me the difference between the document date and posting date in GR(MIGO)
Thanx
MKHI,
Document date:The document date is the date on which the original document was issued.
Posting Date: Date which is used when entering the document in Financial Accounting or Controlling. The posting date can differ from both the entry date and the doc date.
Example:
There is goods receipt happening on 9th sep, 2008 along with it the invoice also comes dated 8th sep, 2008.
Suppose u post the entry on the same date in ur SAP system the day u recvd the goods, i.e. u credit the vendor on good receipt date, then the document date in this case will be 8th sep, 2008. the posting date will be 9th Sep, 2008.
The entry date is the actual date on which u make entry in SAP the system date. So entry date can be diffrent from posting date in this case
Regards
KK
Edited by: Kishore Kumar Galla on Mar 27, 2010 4:32 PM -
Batch search strategy based on goods receipt date
Hello,
Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
Thanks a lot
Thanks!
Best Regards
SrwHi
If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type 023
Then assign this class in Material Master Classification view..
Make sure in Material master, Purchasing view...you have activated Batch management active check box....
Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
Then Create sort sequence in T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
Now you do your regular procedings.....the material Batch will be searched based on GR Date...
Reward if useful
Regards
S.Baskaran -
Report for date variances between delivery and goods receipt date
dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
ThanksHi,
Use Report ME80FN and here check the delivery schedule option in output screen. -
Goods receipt date cannot be in the past
hii
While doing Po i getting below error
" Goods receipt date cannot be in the past "
How to rectify this ?? and why its occuring ??
Thanks>
MM group wrote:
> hii
>
> While doing Po i getting below error
>
> " Goods receipt date cannot be in the past "
>
> How to rectify this ?? and why its occuring ??
>
> Thanks
Check the error No. If error is standard, then we can change the error message to warning, if the error is ABAP generated, we cannot get it changed. Usually ABAP generated errors are created as per clients requirement and can be changed with client and ABAP consultation. -
PO report for field:Latest Possible Goods Receipt Date
Hi Gurus,
can you please recommend me a standart report of Purchase orders, where is possible to see field from PO - item level - tab Delivery - field:Latest Possible Goods Receipt Date. It should be field MEPO1313-LEWED
thank you!hi,
please check it in me2n
Purchase order list displays by Vendor ME2L
Purchase order list displays by Material ME2M
Purchase order list displays by General ME2K
Purchase order list displays by Material Group ME2C
Purchase order list displays by Tracking Number ME2B
Purchase order list displays by PO Number ME2N
Purchase order list displays by Service MSRV3
Aggregate PO History ME87
Analysis of Purchase Order Values ME81N
Thanking you -
Last Goods Issue Date & Last Goods Receipt Date
Hi ,
I would like to know in which table (and fields) I can find the "<b>Last Goods Issue Date</b> " & "<b>Last Goods Receipt Date</b>" based on Material Code, Plant and Storage location.I have to prepare a existing stock report for slow moving material.
Thanks.Hi,
Check table LIKP deliver header and LIPS deliver Item
Regards,
Prashant -
Bill Passing to be done on the rate which is valid on the Goods Receipt Dat
Dear All,
My client has a very valid requirement which I am unable to provide. My client is basically a real estate company which is responsible for building. So the purchase cement, Paint etc. as raw material. The market rate of these raw materials varies almost everyday. So they maintain info record for material vendor combination. Then every day they change the price in percentage in MEKP.
So suppose someone has created a PO on today or 20th July. So system will pick the value from info record whatever is maintained there say Rs10/- . Then suppose on 22nd July market price change to Rs15/- . So they will change the value in info record. Goods receipt against this PO is done on 23rd July .
After GR they will do Bill passing on say 23rd itself. But system will take Rs10/- as this is the PO value. But my client wants it should take Rs15/- as this is the market price on Goods Receipt Date .
My question : Can this be done ? Can Bill passing amount take the value from info record condition rate as on the date of goods receipt ?
Please Reply ...
Regards
AbhijitDear,
That is a goods point . But is there any provision that this updated price will reflect in MIRO automatically or by a single click . Because anyhow they can change the amount manually in MIRO . But accounts person should not have the authorisation to change the price during MIRO .
Price should come from price master or a single click somewhere in MIRO which will update the price to market price . -
Goods issue date and goods receipt date
Hi Guys,
i was asked to display STO list.They asked me add goods issue date and goods Report date in the o/p columns.So any body can tell me what are the fields for goods issue and goods Receipt date's.?can u guys tell me the Tr code for these fields .?
Thanks,
Gopi.Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny -
What is the difference between delivery date and actual goods issue date?
Hi ,
Can you please tell me the difference between Delivery date and Actual goods issue date ?
Delivery data can be be greater than goods issue date?
Thanks,
AjayHi Ajay,
Delivery date means its the original date on which the delivery should be done.Actual goods Issue date is the date on which goods to be delivered according to the purchase order.There can be delay in the delivery so we maintain 2 objects.
Yes delivery date can be greater than Goods Issue date.
Hope this clears
Regards
Karthik -
As to the data type of the data type of the difference between two date type of datas
Hi,
I have a question about the data type of the difference between two date type of datas.
There are two date type of datas as:
SSHIPMENTS.RECEIVEDATETIME
SSHIPMENTS.PROMISEDATETIME
I try to use the following SQL Script in Oracle SQL*Plus as:
SELECT CASE
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
The error message of "Invalid Number" for the '000 01:30:00.000' happens.
I don't know if the data type of the interval is wrong.
Many Thanks,
CathySELECT CASE
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
just try it out.. -
Difference between Invoice Date, GL Date and Accounting Date Oracle AP
Hello,
I have a question that might help a lot of people too later.
I tried to run these queries
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.INVOICE_DATE <> aida.ACCOUNTING_DATE
select aia.INVOICE_ID
from AP_INVOICES_ALL aia, AP_INVOICE_DISTRIBUTIONS_ALL aida
where aia.INVOICE_ID = aida.INVOICE_ID
and aia.GL_DATE <> aida.ACCOUNTING_DATE
I can see that there are lot of results for these queries, where the Invoice Date is not equal to the Accounting date and the GL_Date of an invoice is not equal to the accounting date in the distributions table.
So, what is the difference between these dates.
And if I had to take the Invoice Accounting document entry date, which date do i have to take for these invoices in AP
Thanks
BobHi
Let me try to explain this with an example.
Suppose I buy some stationary from a vendor and he provides me with a detailed invoice of the goods puchased.
In this case the invoice will always have a date printed on it and this date should ideally be entered in the invoice date at AP_INVOICES_ALL level.
Now suppose the invoice happens to be received by me in february and for some reason I could not capture the invoice in my books in february and made a provision for the liabilities and close the books.
However in march i want to book the invoice say on 10th of march in my books and pay the vendor the amount payable.(I Have to reverse the already provided liability in march to reverse the accounting effect).
In this case my book entry date of invoice is the accounting date i.e. 10 March.
In case of oracle, the accounting is maintained so that the invoice header hits the liability account while the invoice distribution hits the charge account(expense account so to say). And to gain more flexibility oracle provides date in both header and distributions to provide an option of booking liability and charge on different dates..
As per the 11i checks there is no check on any of these dates except that accounting date at header and ditribution level must be in an open AP and GL period.
Thanks
MAV.
Maybe you are looking for
-
I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?
-
Data from a deleted datasource
Hi guys, I've deleted a datasource and since all data loaded with this datasource seems to be deleted in my cube when I do a report on these. Nevertheless, the requests of these are still in the cube. Who can say me if the data have been really delet
-
Hi I have a macbook pro 15 (late 2011) and a 3rd generation apple tv. According to this I should be able to get mirroring from my mac to tv - but I can't, there are no options is display settings for anything to do with airplay. Can anyone help? Soft
-
Interrupting Keynote 3 with Front Row
When I interrupt a slide with Front Row to play a song, I get the desktop back afterwards rather than the slide I interrupted. I have to manually click on the Keynote icon to get back to my slide. Is this the intended behavior? It would be really nic
-
Can someone help me with Premiere Elements 2?
I have been working on a slide show for my son's class graduation. This is the second time I've used PE2 to create a slide show, so I am not very good at it! I completed my slideshow (which contains about 100-150 photos, 1 video and audio) I burnt a