Differenece between mm/dd/yyyy and mm/dd/ccyy formats.

hi,
is there any difference between the 2 date formats .mm/dd/yyyy and mm/dd/ccyy formats.
select to_char(sysdate , 'mm/dd/yyyy') from dual returns 07/22/2011
and
select to_char(sysdate , 'mm/dd/ccyy') from dual retruns 07/22/2111how to differenetiate or analyse both.
regards,

CC stands for CENTURY
Change CC to RRRR to get the year
Check the oracle documentation of TO_CHAR()
SCC or CC------------------Century; server prefixes B.C. date with -
YYY or YY or Y------------ Last three, two, or one digits of year
select to_char(sysdate , 'mm/dd/yyyy') from dual returns 07/22/2011
and
select to_char(sysdate , 'mm/dd/RRRR') from dual retruns 07/22/2111
Edited by: LPS on Jul 21, 2011 11:30 PM

Similar Messages

  • What is the differenec between 'sap list viewer' and 'abap list viewer'

    hi
    what is the differenec between 'sap list viewer' and 'abap list viewer'

    Hi,
    There is no difference between them.SAP List Viewer (ALV) is the new name of the ABAP List Viewer (ALV).
    The SAP List Viewer unifies and simplifies the use of lists in the R/3 System. A uniform user interface and list format is available for all lists. This prevents redundant functions.
    The SAP List Viewer can be used to view both single-level lists and multilevel sequential lists.
    Single-level lists contain any number of lines that have no hierarchical relationship to each other.
    Multilevel sequential lists consist of any number of lines that have two hierarchical levels. Multilevel lists have header rows and item rows; the item rows are subordinate to the header rows. For each header row there can be any number of subordinate item rows.
    You can view subtotals and totals rows in both single-level lists and multilevel sequential lists
    From End User Point it is SAP LIST viewer , From Developer Point of View it is ALV .
    Check the Below Link
    http://help.sap.com/saphelp_nw04/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm
    Regards,
    Satish

  • Differenece between  T-codes XK01 & FK01

    Hi all
    Can any one tell me differenece between T-codes XK01 & FK01
    Thanks
    Shravan

    In XK01 Vendor master record contains three sets of data
    <b>General data:</b>  It contains Vendor’s name, address, language, and phone numbers Tax numbers.Bank details etc
    <b>Company code data:</b> It contains  account control data like the number of the G/L reconciliation account for the vendor account.Payment methods and terms of payment set up with the vendor
    <b>Purchase Organization data:</b>If you implement Materials Management (MM), you will need purchasing data. For more information on this, see the documentation for Materials Management. In Materials Management, vendors are represented as suppliers.
    XK01 is used if MM is implemented.
    In FK01 Vendor master record contains two sets of data
    <b>General data:</b>This is data that applies to every company code and every purchasing organization in your company. The general area includes, for example, the vendor’s name, address, language, and telephone number.
    <b>Company code data:</b>This is data that is specific to an individual company code.Company code data includes, for example, the reconciliation account number and payment terms.

  • Possible to segment traffic between 2 interfaces? And other questions...

    I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
    If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
    So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
    Thanks.

    I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
    You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
    You have some type of hardware firewall/security appliance.
    You have some type of wireless access point.
    You don't seem to have any type of router or switch in your configuration.
    You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
    So my questions are:
    Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
    If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
    If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
    If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
    Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
    I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
    Anyway, a little more info would be helpful.
    Oh and if I have this totally worng in what I think your doing.. My mistake.
    Tom N.

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • The difference between VGA, DVI-D and ADC?

    Hi.
    The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
    Thank you for your input.
    Walter

    Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
     Cheers, Tom

  • The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

    Hi,
    Anyone know what is the difference between AIR-ANT5135D-R and  AIR-ANT5135DB-R ?
    From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
    However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference  Guide"
    http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
    Inside the document there is only AIR-ANT5135D-R.
    likewise for the 2.4 GHz,  AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference  Guide"
    Any help would be appreciated
    Thanks,
    Richard

    Found the difference, AIR-ANT5135DB-R and       AIR-ANT2422DB-R are  non-articulating antennas.
    Thanks!
    Richard

  • The difference between Telepresence Content Server and MSE 3500

    Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

    In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
    In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods.  One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc.  However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

  • The difference between SSO/NSF(GR) and NSR

    Hello
    I have question about the differnce between SSO/NSR(GR) and NSR.
    In my understanding SSO/NSR is stateful switchover from Active to Backup
    Mainly take over teh startup configuration and FIB TCAM table and so on.
    But this protocol need to re-establish the routing table and topology database etc.
    But if NSR functions when stateful switchover happens then it takes over routing table
    and toplogy database etc. right? 
    If so, I think BGP peer down/up (flapping) , OSPF/EIGRP neighbor state change does not happen right?

    ITS is used for accessing R/3 through browser....to implement SSO from Portal to access backend R/3 systems over ITS you need to follow certains step ...
    1. Create RFC Destination in J2EE Engine RFC JCo Provider
    2. Create RFC Destination in the R/3   Transaction: SM59
    3. Maintain Portal Server Settings for the Portal
    4. Maintain Single Sign-On in the R/3 System
    5. Export  R/3 Certificate to the Portal System
    6. Import  R/3 Certificate to the Portal
    7. Create  R/3 System in the Portal
    8. Configure User Management in the Portal
    9. Export Portal Certificate from Portal
    10. Import Portal Certificate to the R/3 System
    11. Set Up Repository Manager for R/3 in the Portal
    12. Maintain User management as SAP Logon Ticket in the Portal
    Hope I have answered your query in proper way.......
    If you want step by step details pl s let me know
    Swapnil

  • RFC connection error between BW 3.5 and ECC 6.0

    Hi gurus,
    We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test  (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
    Any idea? Is there any other place (users, RFC) where we have to change user password on system?
    Thanks a lot!
    Regards,
    Iván.
    Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PM

    Solved!
    This is because of the incompatibility of password handling between
    640 and 700 systems.
    We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
    1. Change the password for the user in SAP R/3.
    2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
    3. Authorization test is now successful.
    (SM59 - Test - Authorization).
    Regards!

  • What is difference between  Service map iview and Workset Map iview

    Hi Experts,
                        Can anyone tell me the difference between  service map iView and Workset Map iView.
    When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
    Thanks in Advance
    Janardhan

    Hi,
    Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
    Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
    if you want to more info pls go thr the below thread
    Workset Map iView
    i hope it will help you
    Thanks,
    Sreeni.

  • What is difference between ADF Task Flow and Faces-Config - when delpoy ?

    What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
    Where is the problem?
    Best regards!

    Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
    I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
    Best regards!

  • What is the diffrence between package javax.sql and java.sql

    Is javax designed for J2EE?
    And when to use package javax?

    Hi,
    What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
    1.The java.sql package and
    2.The javax.sql package.
    java.sql provides features mostly related to client
    side database functionalities where as the javax.sql
    package, which adds server-side capabilities.
    You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
    For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Micro Systems
    http://www.sun.com/developers/support/

  • What is the diffrence between My Runnable Interface and Java Runnable

    Hi folks
    all we know that interfaces in java just a decleration for methods and variables.
    so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
    so what is the diffrence between My Runnable Interface and Java Runnable?
    thnx

    Hi folks
    all we know that interfaces in java just a decleration
    for methods and variables.
    so my Question is why when i create an interface its
    name is "Runnable" and i declared a method called
    "run" inside it.then when i implements this interface
    with any class don't do the thread operation but when
    i implement the java.lang.Runnable the thread is going
    fine.
    so what is the diffrence between My Runnable Interface
    and Java Runnable?
    thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
    Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

  • What is the diffrence between a blanket PO and a Framework order?

    What is the diffrence between a blanket PO and a Framework order?

    Hi
    You have to use document type Frame work order for Blanket PO.
    You can use blanket purchase orders to procure consumable materials or services for which it is not worth creating a separate purchase order for each procurement transaction. 
    Blanket purchase orders are usually valid for a longer period of time. You can directly post the invoices for the materials and services procured for this blanket purchase order.
    Raju

Maybe you are looking for

  • Multiclip goes viarable speed on me

    I have used multiclip successfully for the ceremony (2 cameras). Now, I've selected the same raw clips, set in points, clicked 'create multiclip' and bring it into the timeline and the speed is playing at like 90% (says variable) after the clip name.

  • I can not share my project

    I can not use "share" function in FCPX, it is inactive. I can not share my project.

  • How do I delete these files?

    I'm sure that someone has asked this before, but here goes anyway: I have a Curve 9300 and it came with one song (Fountainebleau by Omorphos) and one video (ILWID). I'd like to get rid of these, particularly the song since it's always getting in the

  • [SOLVED] pacman upgrade won't work because of unresolved dependency

    Hey all, I tried a pacman -Syyu today and it found some things and said: :: The following packages should be upgraded first :     pacman :: Do you want to cancel the current operation :: and upgrade these packages now? [Y/n] y resolving dependencies.

  • Problem Doing MIGO.

    Hi friends,     i have one small problem. [Very Urgent]        i have crated number range in transaction code SNUM. in that i have given year = 2007. and number range  from 000000001 to 9999999999.     when i do MIGO for any purchase order then docum