Different and full last page

Hope someone can help here...
I have a formatted report, actually a Sales Order Document, that has a couple of Page headers (some suppressed), 5 Detail sections (some suppressed depending on the type of data line), and a Page Footer.
I want to add a page at the end that shows Terms and Conditions and occupies the full last page - without any of the Page Headers or Footers.
I've added a Report Footer with the last page content - told it to print After new page; also suppressed the PHeaders and Footers with "Suppress when PageNumber=TotalPageCount " and also set the Suppress Blank Section on each.
It sort of works - but doesnt fill the whole page - still leaves blank space above. If I format to be a full page then it spans 2 pages and then I get the Page headers showing on 2nd to last.
Help would be much appreciated.
Phil

Thanks for Resposne Alun...
The odd thing is that it doesnt show what section is it...
On Page 1 it quite clearly shows;
PHa
PHb
PHc
Da
Db
Dc
PF
then page 2 has a large blank space then RF then PF
Doesnt matter how big or small I make my page of text it still has the large spave at the top

Similar Messages

  • Insert in master page, the first page and the last page of my article...

    I need insert in the master page, the first page and the last page of my article... (Indesign CS3-4)
    Is this possible ????
    Thanks for read me...

    Marcos Suárez wrote:
    I need insert in the master page, the first page and the last page of my article... (Indesign CS3-4)
    Insert WHAT ?
    robin
    www.adobescripts.com

  • HT203167 Hi, I recently bought a book (Jeffrey Toobin, The Oath), and the last page of the first two chapters, at least, are missing. Could you advise?

    Hi, I recently bought a book (Jeffrey Toobin, The Oath) through iBook on my iPhone, and the last page of the first two chapters, at least, are missing. Could you advise?

    Nothing no one here can do.  Call the place where you purchased the book from or contact the book author!

  • Firefox on Win8 opens menu and reloads last page or first tab

    Dear community!
    I use a Sony Vayo Duo 11 ultra convertible with latest Windows 8
    Firefox is frequently loading the first tab (seems as it it refreshes and switch back to the first opened page?) It also opens the menu, the cursor jumps to it too, so I can´t continue writing unless pressing escape and replace the position of my cursor. On Youtube Firefox even jumped regularily to the former video!
    I have asked about this on Diaspora and Computerclubs, but nobody knew the answer. It might as well be a Windows problem, although browsers, esp. Firefox make the most problems.
    Thank you so much
    Cheery

    hello Cheery_Littlebottom ,
    at first try to start the firefox in safe mode to check if one of the extensions is causing this problem.
    to do that follow the instructions here and check if the problem's gone:
    [[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_how-to-start-firefox-in-safe-mode|How to start Firefox in Safe Mode]]

  • In Firefox 4, it keeps wanting to open two pages when I open the browser, the home page AND the last page visited in a separate tab. How can I get it to stop doing this?

    At 1st I thought this was because I'd forgotten to properly close my last session, but then I realized that it happens every time.

    At 1st I thought this was because I'd forgotten to properly close my last session, but then I realized that it happens every time.

  • BIP (OBIEE 11.1.1.7.1): Different Headers on 1st page, middle pages, same header on last page as 1st page

    Hello,
    This is a much discussed topic but I still couldn't find a resolution.
    The report I am trying to convert from Oracle Reports is an Invoice. The requirement is as follows:
    On Page 1 The full header including company logo, bill-to, ship-to address, invoice number etc. Standard Invoice header stuff should print 1st page.
    Page 2 andl subsequent pages should print a scaled down version of the above header to conserve space (and paper)
    Last Page should have the Invoice Summary.
    In case of a multiple page Invoice this setup works just fine. I have followed examples available in userguide as well as on the web. Used Different First Page option, created section break so that header on first page can be different than on subsequent pages.
    PROBLEM:
    The issue is that in case of a single page invoice, it prints with the scaled down header, invoice details and summary.
    The requirement is that for single page invoice, the Full header and summary appear. I have put  <?start@last-page-first:body?> <?end body?> so that the summary appears on the single page invoice but the FULL header does not.
    I have tired to follow (http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html) but it doesn't seem to work.
    How can I create the necessary breaks in Word so that I get Full header on 1st page, scaled down header on other..pages and in case of Single Page Invoice, include FULL header and Summary on one page?
    Thanks,
    Manish

    Hi Tim,
    Forgot to mention that there is also a 3rd page which needs to display Part 3 and a different header text which is not something from page 1 or 2.So I guess the even/odd pages in page setup wont work as the 1st page header will be displayed on the 3rd page which is not what is expected.
    I think this is not achievable in MSWord. Is this possible if I use a PDF template?
    Ashwini.

  • Last Page Header and Footer in XML Report

    Hi
    I have one requirement , where except last page for an invoice, all other pages should have one header.
    Last page should have nothing header and in Body some information(Total details) should be displayed and in footer terms and conditions should be displayed.
    if one page is there for invoice , in second page (total details) and terms and conditions should be displayed.
    Any one who already faced this issue please suggest how can proceed for requirements
    Advance thank you

    I need a large footer to appear at the bottom of the last page
    I have made a section break: new page
    I have created a field with the contents <?start@last-page-first:body?><?end body?>
    I have run the report to create an RTF file and the last page footer appears on all the pages
    But if I run it to PDF the footer does the right thing and only appears on the last page
    If I create a Powerpoint document it works OK
    It only fails in the format that I require, RTF?
    Any ideas how to fix this?
    Cheers
    Shaky

  • BIP Last Page Header

    Hi,
    I am creating a report in BIP in which header is repeated on each page with a group field
    i need a different last page header on the final page
    Steps I am following are
    2) Section break: new page
    2) <?start@last-page:body?><?end body?>
    3) Added the text
    Problem i am facing is the
    1) Last page header is displaying on the end of each group field I need it on the final page at the end of the whole report.
    E.g. for customer id 1
    It is coming on the last page of the customer id 1
    I need it on the end of each customer id
    2) The header of the all pages is coming on the next page when I am adding section break.
    Could someone please help me?
    Thanks in advance,
    Pragati

    Hi Vetsrini,
    Currently, I am working on the PO Print report. My requirement is such that is needs Different header in first page. Different header for the rest of the page and the last page with no header but it shows the Terms and conditions.
    I followed the steps that you explained in the link. But it’s not working.
    (http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html)
    Could you please give me a helping hand its bit urgent.
    Thanks in advance
    Chandra

  • How to print text or field (inside a rep fram)on the last page in report 6i

    Hi Everyone,
    I want to print the text on the last page.
    my text is inside a repetating frame.
    as i want to display page no in the filed
    and if it is a last page, display page number appended with Last
    so it will look like
    for 3 pages
    on the first page
    1
    on second page
    2
    and on last page it should display
    3 Last

    You cannot know if you are on the last page or not. See this similar thread: Get value of total pages variable
    Why not put the page number in the margin like this:
    Page 1 of 3
    Page 2 of 3
    Page 3 of 3
    You do that by creating a text field in the margin. Enter this text:
    Page &<PhysicalPageNumber> of &<TotalPhysicalPages>

  • Print job starts, stops on last page of job, then finally restarts.

    Hello, I have an HP Office Jet Pro 8500 (A909), connected via router (ethernet cable). Windows 8, HP Pavillion machine, i5 processor, 64 bit, 6gigs ram
    The print job starts, stops on last page of job, then finally restarts, then starts whole print job over with same results; pausing for about a minute, restarting and finishing job but the driver must detect that the job - still in the queue - is not done and starts again.
    I've swapped ethernet cables with the same results. I can print over the wireless network with other computers and do not have this issue.
    I thought it was a driver issue so I uninstalled/reinstalled HP software, with all available updates, same results.
    The only work around at my disposal now, other than printing from another machine, is to wait for the last page to print and manually clear the queue so the job doesn't print again. Suggestions?
    Thanks

    Hey @DavidWW ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us! Also thank you for taking the time to thoroughly explain the issue, much appreciated. 
    I understand you are having an issue with the last page printing late, the computer not recognizing it, re-printing and so on. You need to print, wait for stall and then last page and then clear queue to stop the printer. That is truly annoying, however; I might have a fix for you in 1 simple post... maybe not, but maybe at least.
    Try the tool I have posted below and run the print fix option.
    Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
    If that doesn't fix your issue make sure you let me know and we can continue.
    I worked for HP.

  • Different Footer on First page and last pages

    Hi
    I am trying to display Continue on first page and middle pages and Total Amount on last page on a multipage PO. I can display different footer page for first page and last page but the middle pages don't have a footer. How to do this if possible. There are so many threads here but not one gives the exact steps.
    first page header footer
    Add Page Break
    2nd page header footer
    Add Section Break => Next Page
    <?start@last-page-first:body?><?end body?>
    last page footer
    Please help
    Thanks

    Did you miss this ?
    http://winrichman.blogspot.com/search/label/different%20page%20header
    http://winrichman.blogspot.com/search/label/element%20in%20header
    http://winrichman.blogspot.com/search/label/diff%20header

  • Different Header for First and Subsequent Pages with Summary on last page

    The data in report can vary from 1 to more than 50 rows (order lines). The header on first page is detailed and the header on subsequent pages has only some fields (whenever data is large). There is a summary section which has to be on the last page of the report only and that too at the bottom (just above the fixed footer in the report).
    So, for a single page report the the detailed header, all lines, summary at the bottom and then the footer has to be printed.
    For a two page report - first page will have detailed header, some lines, fixed footer and second page will have short header, remaining lines, summary at the bottom and then the footer.
    For a three page report the summary has to be on third page only and so on.

    In a word processing document, select your object, place it where you want & then go to Format > Advanced > Move Object to Section Master. To place a different repeating object, you will need to insert a section break.
    With page layout documents, each page is a separate section, so there is no section master. Objects placed on one page don't repeat.

  • Report Builder - Last page issue and Report Footer issue

    I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
    Issue 1 - I have a field that I would like to print on the last page of my report.  How can I determine the last page?  I initially tried using a calculated field set to the 'highest' calc.Page_Number.  Then I could compare the current page to the last page in the 'Print When' property.  But calc.Page_Number can not be used in a definition of a calculated field.
    Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer.  The report includes this page in the total number of pages.  For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2.  Then the only data on Page 2 is the Report Footer.  No page header or page footer prints. 
    Any assistance on these issues would be most appreciated.  To date, using the Report Builder has not been easy.

    To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
    To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
    Try some experiments with different setting of the following properties/issues:
    - in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
    - try to remove unused empty space between detail rows.
    - try to resize and reposition all detail fields so that they snap to the grid.
    Best regards

  • How to get safari to open to the last page I was on and screens to enlarge automatically?

    Hello, I just upgraded to the latest iMac version from my 2010 model, and whenever I close and open up safari it opens to top siotes instead of the last page I was on, and every time I open it I have to enlarge it myself by clicking the arrows in the top right. Same happens with everything else, like the app store. How do I change this so whenever I go to safari it opens to the last page I was on and has safari, app store, etc. have large screens right away? I set up my old iMac 3 years ago, and I guess I must've done something to have it do this, but I forgetn what I did. Thank you in advance

    Hello there, Clumn.
    The following Knowledge Base article provides some general tips for Mavericks that may address your issue:
    OS X Mavericks: General preferences
    http://support.apple.com/kb/ph13803
    Particularly of note:
    Close windows when quitting an application
    If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
    This feature when not selected will allow the application to reopen windows automatically when you open the app.
    Additionally, this article provides information on how to set windows Full Screen:
    OS X Mavericks: Take apps full screen
    http://support.apple.com/kb/PH14302
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My opening page won't load the home page even though I set it to home page in preferences.  Instead it always opens to the last page I had when I last closed.  I'd like it to open to my home page.  I've tried dumping and reloading Safari, I have 5.1.2.

    My Safari 5.1.2 Just won't open to my home page even though I have it set in preferences.  It continues to open on the last page I was on when I last closed Safari.  What overrides my settings in preferences?

    I just purchased my first MAC after working on PC for the past 25 years and would like to know how to keep my safari program to be the full screen everytime I get into the app. I always have to click the two arrows to the top right of the safari program but on a PC it is always opened in full screen mode ??? and while I have you plugged in how do you make it so that the manu bar does not go away (hyernate??)
    Cheers

Maybe you are looking for