Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Similar Messages

Batch Determination at Storage location Level

Dear All,
I have one question on batches when I am entering stock against batches in Outbound Delivery Note (as batch split ) the batch determining the storage location is different not the one which it belongs to, I need the batch stock should be determine in same storage location not the different one.
For example: I have 5 storage locations, each storage location contain 5 to 6 batches;
Storage Location: WO1, WO2, WO3, W04 AND WO5
Batches: A1,B1,C1,D1,E1 etc.
Stor. Loc    Batches
1. W01:             B1, B2, B3, B4, B5, B6
2. W02:             A1, A2, A3, A4, A5
3. W03:             C1, C2, C3, C4, C5
4. W04:             D1, D2 D3, D4, D5
5. W05:             E1, E2, E3, E4, E5
I. If I enter B1 and stock 10kg then it automatically determining storage location as W02. Actually it belongs to storage location W01 it should be the same W01only
II. If I enter C1 and stock some 15kg then also it automatically determining storage location as W02. Actually it belongs to storage location W03 it should be the same W03.
Kindly give me the solution.
Thanks in advance
Regards,
MH

Clsing due to no reply

How to run MRP on different storage location level ?

Dear Experts,
Need your valuable guidance to solve the below requirement form the client-
1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
           For sake of example: in SL01 he wants the safety stock for particular material set to 5
                              In FS18 he wants the safety stock set to 2
                              In FS15 he wants the safety stock set to 1
Kindly tell me whether it is possible? & guide me how to do it.
2) Also tell me how to run MRP on a storage location level?
           This is because after maintaining different safety stocks for one material in different storage locations, is it possible to appear each storage location with their differing safety stock levels?
I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
Kindly guide me for the above issue
Thanks in advance for your support.
Regards,
Mehul

Hi Umashanker,
Thanks for your suggession . Accordingly I have resolved the issue.
Regards,
Mehul

Need Inspection lot creation at only one storage location level - QA07

Hi,
I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
Thanks in advance for your relevent response.
Thanks & Regards
Kundan Kumar

Hi,
Next inspection date is maintained at the batch level, not at the storage location level.
You can suggest the following solutions if it is feasible in your business scenario.
Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
With Best Regards
Vithal

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Availablity check at storage location level in STO

Hi,
There is an unique requirement from my client with respect to the Availability check at storage location level in STO
Process:
Based on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
During this availability check the stock will be considered at plant level and not at storage location level.
Requirement/Scenario:
Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
Example
Total required qty: 1000 of material X
material X - Stock in Storage location A : 600
material X - Stock in Storage location B : 400
Two separate line item needs to be created in the STO
Sl no
Material
qty
Issuing storage location
1
X
600
A
2
X
400
B
Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
Please suggest how to achieve this. If any enhancements needs to be done we will do it.
Thanks & regards,
Prashanth

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

Using BAPI_MATERIAL_AVAILABILITY for storage-location-level

Hello experts,
To determine the ATP quantity Iu2019m using the function module BAPI_MATERIAL_AVAILABILITY. I need to get the ATP quantity on storage-location-level; for this the following parameters are set:
- PLANT
- MATERIAL
- UNIT
- CHECK_RULE
- STGE_LOC
The result in table WMDVEX is for different storages locations the same, but in transaction CO09 I have different quantities for the storage locations.
How can I determine the ATP quantity on storage-location-level?
Thank you for your hint.
Regards,
Kurt.

Hallo Brad Bohn,
thank you for your suggestion.
Iu2019m using an own rule (as copy of rule A), the own rule donu2019t use purchase orders.
In CO09 I have the following ATP Quanties:
09.09.2009     BStand          1,775     0     259
09.09.2009     LgBest     0001     785     0     459
09.09.2009     LgBest     0002     989     0     452
09.09.2009     LgBest     0003     22     0     20
The function module provides only 259 for each storage location.
There is another function module AVAILABILITY_CHECK. Can this function module also be used to determine ATP quantity?
Thank you & best regards,
Kurt.

Material with different concentration in one storage location

We are working in a chemical industry that make caustic soda they are selling two material of caustic soda with two different concentrations (33% and 50%). Problem is that they move caustic 33% (one material) in to one storage location at the same time the move caustic 50%(second material) in the same material tank. In this way the concentrations of caustic change say 45%. If they want to increase the concentration they move caustics with greater concentration to make this stock to 50%. How to handle this situation. Every time the move these two materials in a same tank materials concentration changes.
Regards
Ahmed

Ahmed,
Can you please let us know,
1. Is your material batch managed? If yes would you have multiple batches in the storage location?
2. How is the material transferred to the tank? Is it through manual 311 movement?
Regards,
Prasobh

Reg : client level data,plant level data,storage location level data

hi
when we enter the data mm01 we select views.these views are based on cleint level,plant level,storage location level .i want the difference between all the three levels.how do we differentiate.

As per our business process there are one company and in which many plants and storage location are available. In which many materials are available in different plant in different storage location.
As per SAP Standard structure: -
Company >> Company code1 & Company code2... >> Plant 1 & Plant 2 & Plant 3 .... >> Storage location 1 & 2 & 3........
And in all plant and storage location have different data.
Suppose in one plant we do quality testing for material and it may be possible in other plant we not perform quality testing for material. So in this case for same material quality data is different for different plants.
Client Level: - Means data is same for all plant level like Basic data
Plant Level: - Means data is based on plant level like Purchasing, Plant data, Quality data, Accounting view.
Storage location level: - Means data is based on storage location level, for different storage location data will be different like Storage location stock data ..
Due to this you can maintain different data on plant level & storage location level.
Regards,
Mahesh Wagh

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

MC.9 drill down at storage location level

In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
Kiran

Hi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran

Opening and closing balance values at storage location level

Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location:      1001     1002
Opening Balance:      2000     3000
Receipts:                           1000      2000
Issues:                            2000     3000
Closing Balance:      1000     2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Stock valuation down to Storage location level

Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.

Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further?

Different Batch Classification at storage location level

Similar Messages

Maybe you are looking for