Different behaviour in MAX vs. LabVIEW when writing to IMAQdx GigE attribute

Hi, I am controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx. Apart from a couple of quirks with the interface we are acquiring images without much problems at the moment.
However, there are one or two issues that are confusing us. In this case, it is possible to set an attribute in MAX (a command attribute that instructs the camera to perform internal calibration) but when setting the same attribute in LabVIEW the error 0xBFF69010 (-1074360304) Unable to set attribute is thrown. See attached images.
I check whether the attribute is writable before attempting a write. It is, however the write is unsuccessful and reading the iswritable attribute then returns false. In MAX I can write to this attribute without any issues.
Is there anything that I need to configure/read/write in my LabVIEW code that MAX does. Does MAX write to all attributes (based on the values in the XML file) when it opens the camera or does it simply read all the values from the camera. When LabVIEW opens a camera reference does it perform the same steps as what MAX does - I'm trying to figure out what the difference between MAX and LabVIEW could be that could be causing this behaviour.
Any help will be appreciated.
Solved!
Go to Solution.
Attachments:
Diagram.png ‏15 KB
FrontPanel.png ‏8 KB
It works in MAX.png ‏20 KB

AnthonV wrote:
Hi, I am controlling a Dalsa GigE camera in LabVIEW RT using IMAQdx. Apart from a couple of quirks with the interface we are acquiring images without much problems at the moment.
However, there are one or two issues that are confusing us. In this case, it is possible to set an attribute in MAX (a command attribute that instructs the camera to perform internal calibration) but when setting the same attribute in LabVIEW the error 0xBFF69010 (-1074360304) Unable to set attribute is thrown. See attached images.
I check whether the attribute is writable before attempting a write. It is, however the write is unsuccessful and reading the iswritable attribute then returns false. In MAX I can write to this attribute without any issues.
Is there anything that I need to configure/read/write in my LabVIEW code that MAX does. Does MAX write to all attributes (based on the values in the XML file) when it opens the camera or does it simply read all the values from the camera. When LabVIEW opens a camera reference does it perform the same steps as what MAX does - I'm trying to figure out what the difference between MAX and LabVIEW could be that could be causing this behaviour.
Any help will be appreciated.
Hi AnthonV,
"Quirky" is a good way to describe the Spyder3 when it comes to the GigE Vision/GenICam interface (as opposed to Dalsa's driver which communicates using custom serial commands to the camera over ethernet)....
The Spyder3 has a lot of timing-dependent issues. It is possible that the delay between opening the camera and setting that feature is different via MAX vs your code in LabVIEW. Also, there are certain cases where MAX will surpress the error from being displayed. Ignoring the error shown vs. not, do you see the feature take effect in either of the two cases?
The basic behavior between MAX and LabVIEW is the same. In both cases when you open the camera all the settings are loaded from our camera file which has the saved camera settings. This file is created the first time you open the camera and is updated whenever you click Save in MAX or call an API function to save the settings. In any case, I do know that the Spyder3 has various issues saving/restoring settings to our camera files.
I suggest talking with Dalsa about the issues you are having. They might be able to set you up with newer firmware that addresses some of these problems (we have worked with them in the past to identify many of them).
Eric

Similar Messages

Different results from MAX and Labview

Hi all,
We did an impact testing a couple of days ago, and I got very big acceleration (the peak is about 300g, which is much larger than the estimated value).
And then I tried a small imact test in the lab using a steel plate which is less than 1 lb to impact a steel ruler, I still got big peak number (more than 200g, which is impossible). And then I tried the small impact test again by using MAX, the peak number is about 12g, and the curve seems like pretty reasonable. I was wondering why I got different results by using MAX and Labview?
Also, sometimes when I connect the SCXI-1001 to the computer, it says the USB is malfuntion and cannot be recgonized by the computer, and turns out the driver file does not exists. But most of the time, it works very well and the driver file does exists. Why this happened?
Thanks.
Yuan

jyuan wrote: but I want to clike one "run button" and get data from strain gage, LVDT, accelerometer at the same time and our tesing duration is just about a few seconds. And also I didn't find a place where I can record the data in MAX
You can do that. A task can only have the same types of inputs, meaning Analog Input, Analog Output, Digital Input, Digital Output, etc. Different sensors are just read with Analog Inputs. So they all can be in the same task. In MAX, just set up a task a configure each channel as it should be. Then use that single task in your LabVIEW code.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Different behaviour with 2 PC's when calling VIT via VI server

Hello,
I know there are a lot of posts about VI server and VIT on this forum, but i think my problem is not common.
I use Labview 6.1 on Windows XP Pro. Pentium 2.6GHz 512Mo.
My application load many instances of a template VI (vit) via VI server. All goes perfect in the development environment.
When I generate a redistributable exe via app Builder, the application seems not to load the different instance of the vit, but without Error (I have put an error handler when loading the vit).
The vit is included in a llb (the same as the main vi). I generate a single executable file (without external llb), i which i see the vit when opened.
The paths are OK for the 2 environment (debug and runtime),
vit is loaded in the app builder, and the VI Server Datasocket too. The Front Panel of the instance is opened before executing as explained in some posts.
The most interesting (crazy?) in this story, is that my application is correctly running (a little bit slower, it's true ... )) on an old PC (Pentium II 300MHz with 128Mo) !!!
Is there any relationship with the machine speed ?
If somebody has an explanation ... or a solution (my client has bought a modern PC !)
Thanks a lot.
-Michael- (my english is so poor ...)

Hi MickAltrel
When I was confronted to this kind of behavior, it was due to loops that where not timed... I know it makes it very basic, but did you check that such problems are not present ?
Doc-Doc
Doc-Doc
http://www.machinevision.ch
http://visionindustrielle.ch
Please take time to rate this answer

Different behaviour of Flash content when on server

Hi
I have noticed different behaviours of my Flash movie in case
a/ I am checking offline content (SWF) using the fault view (Show All)
b/ I am checking the SWF in a HTML file on a server.
More concrete: Depending on a number of conditions I attach a movieclip to a certain object. This works fine in offline mode.
Another example: Depending on a certain zoom level of the application, I unload some SWF.
All works fine offline.
When I check this online, the attach movieclip function only works in some cases, the unload of SWF does not work .
What can be the cause ?
bestregards
eG

Not sure about most of your questions -- this is all new stuff for me, too. But on this one item, I hope this helps:
For example it tells me that a plugin (which has already been installed) needs to be installed.If you installed the Mozilla browser after initially installing the java plugin in IE, then the plugin needs to be installed within the Mozilla browser's plugins directory. And I have never been able to get Netscape or Firefox to install a Forms plugin properly. It seems like I need to run IE to get the plugin installed automatically. Then I go back to the other browser and all is ok. Looking into the Mozilla-based browser's plugins folders, I can see that running the plugin install through IE also copies the corresponding .dll file into all the Mozilla-based browsers' plugins folders.
But since you have already installed the plugin in IE, I am not sure how you would get it to work for the other browser. But if you can identify the .dll required, just copy it yourself into your Mozilla browser's folder.

[svn] 2710: Fixed 3.1. 0 by reverting to the old behaviour when writing out debug

Revision: 2710
Author: [email protected]
Date: 2008-08-01 14:12:55 -0700 (Fri, 01 Aug 2008)
Log Message:
Fixed 3.1.0 by reverting to the old behaviour when writing out debug
line numbers. This prevents the player from seeing -1, which was
causing hangs/crashes. The real fix is to track down where synthetic
functions are getting generated and make them not debuggable, so they
don't reuse the debug line numbers from previous debuggable functions.
This will be done in trunk in a follow on checkin.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-16323
API Change: NO
Reviewer: jspiro
Code-level description of changes:
Modified setPosition() and clearPositionInfo() to no longer set the
debug_linenum to -1.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16323
Modified Paths:
flex/sdk/branches/3.1.0/lib/asc.jar
flex/sdk/branches/3.1.0/modules/asc/src/java/macromedia/asc/embedding/avmplus/ActionBlock Emitter.java

April, We are aware of this problem and the fix is being coded as I write this message.
-Prasad

SQL Server Management Studio and Native Client different behaviour on delete

I have a problem with transaction containing insert and delete to same table and some select/insert/update to some other tables. Problematic table has primary key defined as combination of column1 and column2.
When two different instances using Native Client execute simultaneously this code and make inserts to table then delete part of code causes deadlock. However this doesn't happen when trying this situation in MS SQL Server Management Studio query.
Is there some option that is missing from Native Client connection string which can cause this different behaviour?

Hello,
I don't think there is a difference in the behavior. SSMS uses ADO.NET and that Provider base on the Native Client.
The difference will be more that way, when the transaction is commited and so the locks released. I guess your application keeps the transaction (much) longer open; you should commit a transaction as soon as possible to avoid long time locks and so
deadlocks.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Application Crashes when writing to TDMS

My application written with LabVIEW 2009 (9.0.1) crashes occasionally when writing to a tdms file. The application logs data to a tdms file at low sample rates (~1/min). Attached is the error information.
Could my error be related to this thread.
Storage VI error thread
Mark Yeager
Attachments:
17c6_appcompat.txt ‏7 KB
App Crash Error.png ‏45 KB
creep_log_11-17.pdf ‏18 KB

Brandon,
I attached better pictures.
This crash seems to occur randomly. However, It usually occurs after a day or two. I can't send the exact code, but can send the a simplified version of the code.
Thanks,
Mark
Mark Yeager
Attachments:
App Crash (Bigger).png ‏16 KB
App Crash Error (Bigger).png ‏20 KB

In-different behaviour of join condition

My query is of in-different behaviour of join condition with join between a varchar2 column and a number column. I am using the following join condition :-
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
where CM.UPDATED_BY is a varchar2 column and LM.LOGIN_ID is a number column. Now, CM.UPDATED_BY also has number only but some previous & old data is having varchar2 data. So, for that reason, i put the to_char before LM.LOGIN_ID, otherwise, only
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
would having been okay. Now, my real question is that the query with the condition,
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
works fine as long as there is no 'character' data in 'CM.UPDATED_BY'. If i put the condition:
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
then, the query is taking too long and the output is also not coming. Please help in solving my doubt as i need it resolved urgently.

1) Did you intend for all 4 join conditions to be identical? From the text of your question, it sounds like some of the conditions should be different.
2) How do you compare the running time when CM.UPDATED_BY has non-numerica data and when it has numeric data? If you are altering the data in the table, are you reanalyzing the table between runs? Is there a difference in the query plan in the two cases?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Different behaviour of XMLType storage

hi,
I have problem with different behaviour of storage type "BINARY XML" and regular storage ( simple CLOB I guess) of the XMLType datatype.
Setup
- Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
- XML file ( "Receipt.xml" ) with a structure like :
<?xml version="1.0" encoding="UTF-8"?>
<ESBReceiptMessage xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <ESBMessageHeader>
          <MsgSeqNumber>4713</MsgSeqNumber>
          <MessageType>Receipt</MessageType>
          <MessageVersion>1.1</MessageVersion>
     </ESBMessageHeader>
     <Receipt>
          <ReceiptKey>1234567-03</ReceiptKey>
          <ReceiptLines>
               <ReceiptLine><Material><MaterialKey>00011-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
               <ReceiptLine><Material><MaterialKey>00021-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
               <ReceiptLine><Material><MaterialKey>00031-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
.....etc....etc.....etc...
               <ReceiptLine><Material><MaterialKey>09991-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
               <ReceiptLine><Material><MaterialKey>10001-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
               <ReceiptLine><Material><MaterialKey>10011-015-000</MaterialKey></Material><Qty>47.0</Qty></ReceiptLine>
          </ReceiptLines>
     </Receipt>
</ESBReceiptMessage>=> 1 Header element : "Receipt" and exactly 1001 "ReceiptLine" elements.
Problem:
Test 1 :
drop table xml_ddb;
CREATE TABLE xml_ddb (id number,xml_doc XMLType);
INSERT INTO xml_ddb (id, xml_doc) VALUES (4716,XMLType(bfilename('XMLDIR', 'Receipt.xml'),nls_charset_id('AL32UTF8')));
select count(1) from (
SELECT dd.id,ta.Receiptkey,li.materialkey,li.qty
   FROM xml_ddb dd,
        XMLTable('/ESBReceiptMessage/Receipt' PASSING dd.xml_doc
                 COLUMNS ReceiptKey VARCHAR2(28) PATH 'ReceiptKey',
                         ReceiptLine XMLType PATH 'ReceiptLines/ReceiptLine') ta,
        XMLTable('ReceiptLine' PASSING ta.ReceiptLine
                 COLUMNS materialkey VARCHAR2(14) PATH 'Material/MaterialKey',
                         qty         NUMBER(10)    PATH 'Qty') li
COUNT(1)
      1001
1 row selected.The storage of the XMLType column has not been specified.
=> All 1001 detailled rows are selected.
=> Everything is fine
Test 2 :
drop table xml_ddb;
CREATE TABLE xml_ddb (id number,xml_doc XMLType) XMLType xml_doc store AS BINARY XML; -- <---- Different storage type
INSERT INTO xml_ddb (id, xml_doc) VALUES (4716,XMLType(bfilename('XMLDIR', 'Receipt.xml'),nls_charset_id('AL32UTF8')));
select count(1) from (
SELECT dd.id,ta.Receiptkey,li.materialkey,li.qty
   FROM xml_ddb dd,
        XMLTable('/ESBReceiptMessage/Receipt' PASSING dd.xml_doc
                 COLUMNS ReceiptKey VARCHAR2(28) PATH 'ReceiptKey',
                         ReceiptLine XMLType PATH 'ReceiptLines/ReceiptLine') ta,
        XMLTable('ReceiptLine' PASSING ta.ReceiptLine
                 COLUMNS materialkey VARCHAR2(14) PATH 'Material/MaterialKey',
                         qty         NUMBER(10)    PATH 'Qty') li
COUNT(1)
      1000
1 row selected.Storage of the XMLType column has been defined as "BINARY XML"
=> Only 1000 rows are select
=> One row is missing.
After some tests : There seems to be a "hard border" of 1000 rows that comes with the different datatype ( So if you put 2000 rows into the XML you will get also only 1000 rows back )
Question
As I am a newbie in XMLDB :
- Is the "construction" with the nested tables in the select-statement maybe not recommended/"allowed" ?
- Are there different ways to get back "Head" + "Line" elements in a relational structure ( even if there are more than 1000 lines) ?
Thanks in advance
Bye
Stefan

hi,
General
You are right. I have a predefined XSD structure. And now I try to find a way to handle this in Oracle ( up to now, we are doing XML handling in Java ( with JAXB ) outside the DB)
=> So I will take a look at the "object-relational" storage. Thank's for that hint.
Current thread
The question, whether there is an "artifical" border of 1000 rows, when joining 2 XML tables together, is still open....
(although it might be not interesting for me anymore :-), maybe somebody else will need the answer...)
Bye
Stefan

When writing an email or word doc, If i press ' key on my keyboard it returns down a line

Every-time i use the Apostrophe key ' when writing an email on Mac mail the curser automatically drops down a line, like I've hit the enter key.
Please help me fix.

Try a different keyboard. At least on the QWERTY USA keyboards, the two keys are side by side. If anything gets stuck between those keys, it can make it take both keys as a command. Alternatively if you aren't careful where you type, you may hit enter when you've not meant to. Pulling the keys off the keyboard is rarely recommended as you can damage the key mechanism. There are keyboard vacuums that can help if the machine is turned off. I would not use them when the machine is turned on, as static electricity could easily damage the mechanism when it is on.

Different behaviour between 1.4,1.5_05, 1.5_07.

Hi and thanks in advance for your help,
Looking for pointers to a solution for a problem I have.
A set of Java classes subscribe to a subscription service and listen for updates on a network. To do this the JVM uses JNI (actually a JIntegra vendor product) to talk to the Windows DLL files on the server, it�s these files that actually listen for the updates. The information is then passed back up to the JVM (via the JIntegra libraries). The strange behaviour i get is as follows:
1.     No problems with JDK 1.4.*
2.     JDK1.5_05: The program runs fine for a few minutes and then crashes out BUT with no stack trace or errors at all (it just terminates).
3.     JDK 1.5_07: The program runs ok to start with but then consumes all the file handles on the Windows server. After approx 4hrs the program hangs as it has consumed all the servers spare file handles (in fact 3,800,000 of them).
The added problem of debugging this, is that we use a vendor for the Java/COM+ interaction and we don�t have the source code, But I have tried different versions of the JIntergra without any change in the behaviour (so i don't think its that). It appears to be the JVM version that causes the change in behaviour.
I do not understand why I get such different behaviour from the different versions of Java? Although both JDK1.5 don't work.
I was wondering if someone can point me in the right direction for trying to get JVM information outputted when the JDK1.5_05 crashes out.
How can I put a hook in the JVM in my code to output information when it exits. I realise its doing it unexpectedly so this type of solution might not work but I find it strange that no error is thrown.
Also; Does anyone know of any bugs that might possibly explain any this behaviour?
Any ideas anyone.

Jintegra recommend using 1.5. I will check the JNI bugs database to see if anything like this has happened before:
Got this one stacktrace recently:
# An unexpected error has been detected by HotSpot Virtual Machine:
# Internal Error (4D555445583F57494E13120E4350500080), pid=1944, tid=1500
# Java VM: Java HotSpot(TM) Client VM (1.5.0_07-b03 mixed mode, sharing)
# Can not save log file, dump to screen..
# An unexpected error has been detected by HotSpot Virtual Machine:
# Internal Error (4D555445583F57494E13120E4350500080), pid=1944, tid=1500
# Java VM: Java HotSpot(TM) Client VM (1.5.0_07-b03 mixed mode, sharing)
--------------- T H R E A D ---------------
Current thread is native thread
Stack: [0x045e0000,0x04620000), sp=0x0461fb08, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x11f2eb]
V [jvm.dll+0x62f13]
V [jvm.dll+0xd1741]
V [jvm.dll+0xd18f0]
V [jvm.dll+0x90d16]
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x03029730 JavaThread "J-Integra COM initialization thread (please don't touch)" daemon [_thread_blocked, id=1684]
0x00237c28 JavaThread "DestroyJavaVM" [_thread_blocked, id=3112]
0x009fc7c8 JavaThread "Thread-0" [_thread_blocked, id=2996]
0x009a16a8 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2860]
0x00238478 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1464]
0x0099f730 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3168]
0x009998e0 JavaThread "Finalizer" daemon [_thread_blocked, id=2928]
0x0023fae0 JavaThread "Reference Handler" daemon [_thread_blocked, id=2268]
Other Threads:
0x009982d8 VMThread [id=2036]
0x009a2ce8 WatcherThread [id=532]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 244K [0x22ab0000, 0x22b50000, 0x22f90000)
eden space 512K, 47% used [0x22ab0000, 0x22aec330, 0x22b30000)
from space 64K, 6% used [0x22b40000, 0x22b410a8, 0x22b50000)
to space 64K, 0% used [0x22b30000, 0x22b30000, 0x22b40000)
tenured generation total 1408K, used 917K [0x22f90000, 0x230f0000, 0x26ab0000)
the space 1408K, 65% used [0x22f90000, 0x23075430, 0x23075600, 0x230f0000)
compacting perm gen total 8192K, used 1354K [0x26ab0000, 0x272b0000, 0x2aab0000)
the space 8192K, 16% used [0x26ab0000, 0x26c02a20, 0x26c02c00, 0x272b0000)
ro space 8192K, 67% used [0x2aab0000, 0x2b00d9f8, 0x2b00da00, 0x2b2b0000)
rw space 12288K, 46% used [0x2b2b0000, 0x2b853808, 0x2b853a00, 0x2beb0000)
Not sure what 'Internal Error (4D555445583F57494E13120E4350500080)' represents.
Thanks for your advice.

I/O Error when writing access Log buffer to file. error number: 28

Hi,
Oracle OracleAS Web Cache 10.1.2.3.0, Build 10.1.2.3.0 080201 is writing events like this:
[alert 13215] I/O Error when writing access Log buffer to file. error number: 28
I've looked for this alert and i've found this description:
WXE-13215 I/O Error when writing access Log buffer to file. error number: %d
Severity: alert
Cause: I/O error happened when OracleAS Web Cache tried to write to the access log file.
Action: Check the status of access log file. For example, see if the disk is full
Anybody knows what "error number: 28" stands for? The logs are sended to other server and it seems that the disk size is ok.
thanks!

I tested again...it seems LabVIEW doesn't like the way I wrote the measurement files. I attached a set of VIs (ZIP-file) to give you a clue how it was done. When I try to save and read a file containing just plain DBLs from a 1D-Array (see attached file generating VI) it works perfectly well for large file sizes.
So there might get something messed up by the way LabVIEW saved the measured data. You'll notice, that I (accidentally) left the "prepend array string size" input of "write to binary file" function unwired which means that the size information will be written as a type of header. Maybe this is the reason that it doesn't work as expected...
Attachments:
VibrationMeasurement.zip ‏76 KB
generate_test_bin_data.vi ‏12 KB

Portege M400 screen deforms at center when writing

Hi
When writing on or near the center of the screen the image at the center of the screen deforms somewhat, like when touching a normal lcd screen and the screen colours change. It does not take much pressure to do this. Is this typical behaviour for a tablet pc although I would expect this not to be the case?
Thanks
Rivaaj

Hello
It is not typical and there must be some explanation. On this way it is not easy to say why this happen but I presume that there is some mechanical problem and can not be because of software. I am also sure that just investigation by technician can give you answer why this happen.
Please contact them and explain the situation. The addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Bye

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
Process:         Adobe Premiere Pro CC 2014
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type: X86-64 (Native)
Parent Process: launchd [2538]
Responsible:     Adobe Premiere Pro CC 2014
Date/Time: 2015-01-06 14:04:23.500 -0700
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 55 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Customer created test export with 777 permissions and set mount parameters to the following:
mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
-- Original mount options:
     General mount flags: 0x40 async
     NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
-- Current mount parameters:
     General mount flags: 0x4000058 async,nodev,nosuid multilabel
     NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
479         V3 CREATE Reply (Call In 478)
484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster. Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.

Different behaviour in MAX vs. LabVIEW when writing to IMAQdx GigE attribute

Similar Messages

Maybe you are looking for