Different between worksheet and preview

You can see the mismake of the line Geslacht (Gender) in my worksheet I choice horizontal but in display it is vertical ?
What went wrong?

Hi,
Could you please share your form with me [email protected] so that I more easily reproduce this issue? Instructions for sharing can found here - http://forums.adobe.com/docs/DOC-2462. Also, please let me know which browser you are using.
Thanks,
Brian

Similar Messages

Page size different between design and preview modes

When I accept the default sizes when creating a new site, the page size appears as it should in design, but then when I preview it, it appears much larger, almost a perfect square. So, what I think I'm creating in design is not what I see when I preview it. See the example below. So what I think I'm designing in Design mode is not the result I get when I preview it. Can anyone tell me why that is? Is this a setting I can modify? I've been accepting the default settings when creating a new site.
Thanks very much!
Jcaro

I have the same problem and the Turn off the "Sticky Footer" option in Site Properties. does not work my pages contain tabbed panels.

Why is different between consumption and spare part material Amount in Accounting?

I go to mb51
in Accounting document there is different
l found the standard price was changed in the last . it was changing from 850,000 to 1000
i don't know why is different between consumption and spare part material Amount Accounting??? please help me . how can I solve it?

pay attention just first document has a different accounting amount . in others there aren't different .see these screenshot :

What is the different between statement and preparedstatement?

hi,
recently i have attended a telephonic interview. they asked me what is the different between statement and preparedstatement? and when u will use them? Hi! can any one say me the original difference??

sorry dear,
i am already shortlisted. and monday is my HR round.
. Every 1 is not like u.
So you have read the examples and explanations that you found when you googled, and you have read the javadoc and you still don't understand? And you are shortlisted? For what? I hope you won't do server programming.
I will give you a few hints.
Escaping of data
Storing of dates
Safer
Faster

How the implementation differs between BW and BI , Is BI takes more time fo

Hi All,
I would like to know difference between implemenation and time lines for MM as mentioned below.
How the implementation differs between BW and BI , Is BI takes more time for implementing MM module than on BW?
Thanks in advanced. (Full points will be awarded)
With Regards,
PCR

Hi Timo,
Thanks for response!
But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
and i have overriden the executeQuery() method in the View Object Impl class as shown below:
public void executeQuery() {
Map sessionScope = ADFContext.getCurrent().getSessionScope();
sessionScope.put("MyQuery", this);
try {
super.executeQuery();
} finally {
sessionScope.remove("MyQuery");
throw new JboException("Query Taking too long to respond");
and in the JAVA class i am calling the above method like this:
monitor.setQueryTimeOut(6);
monitor.executeQuery();
But the issue is:
1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
Kindly let me know how to resolve the above issues, any pointers will be helpful.
Thanks in advance.
Edited by: user9223904 on Nov 3, 2012 4:42 AM

FB60 screen change layout different between DEV and PRD

Hi,
I'm having problem with transaction FB60. When i try to change the layout in PRD, in screen Edit System Setting, some of the field showing 0 length. For example in WBS element field, in DEV show length 24 but PRD show length 0. I try to compare the version but it is same (program & table structure - ACGL_ITEM). When I debug the program, found out that it will get the structure from sap internal c program call 'AB_GET_CX_DATA'. So, maybe this program version are different between DEV and PRD.
Anybody knows what is the cause of this problem? Or maybe somebody can tell me how to check sap internal c program.
Thank you very much.

Yes. FB60 is Enter Vendor Invoice. In this screen you can see a table with column such as GL Acct, Debit/Credit, Amount in DC, Cost Center and others. You can add or remove some of the field using Table Setting and create Screen Variant. My problem is, the length of WBS Element and Profit Center field is 0. How to change the length.
I already searched in forum but I only found how to create screen variant.
Thanks.

What is the different between component and component type in extract struc

Hi All,
What is the different between component and component type in the Extract Structure?
I used them, but I never really know the different between them yet.
Thanks,
Grace

The difference between Component and Component Type are:
Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

What is different between Analytics and VC Forum?

Hi Experts!
I don't know what is different between Analytics and VC forum in SDN. of course, Analytics is not Visual composer.
But, I guess that most of analytics questions will be related to Visual Composer in this Analytics Forum.
How about your opinion?

Hi Young
Analytics is business process oriented and thus it's domain is BPX hence it is placed under forum for BPX(Business Process Expert).
VC is a tool and it is in technology domain.
First we discuss a scernario based on particular business process. Then we prepare detailed level of analysis-reporting and actionable analytics this business process would need. Then we use tools like VC to accomplish this actionable analytics.
Hope this helps
Regards
Pradip

What's Different Between ODI and FDQM ?

I need to know What's Different Between ODI and FDQM ?

At is simplest ODI is an enterprise scale ELT tool that can cope with moving very large amounts of data bwteen heteregeneous systems. It requires a fair degree of technical knowledge to use well and that the user is pretty competent with SQL. It is not really an end user tool and the jobs tend to be lights out scheduled processes with a limited user interface for executing these jobs. FDQM is more of a data quaility tool which gives the average end user the out of the box functionality to be able to transform and load data into various target systems. It is not designed to move very large amounts of data efficiently i.e. multi millions of lines of data like ODI. However it does have a rich user interface that provides an easy to use mapping engine, a repeatbale controlled data load process and has a host of in built reporting and audit features which would have to be built from scratch in a tool like ODI

What's different between OWB9i and Discorver4i?

1.What's different between OWB9i and Discorver4i?
2.Discorver4i is ROLAP or MOLAP or HOLAP?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

What' s different between color and swatches?

what' s different between color and swatches?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

Different between CIF_GEN4_CONVERT_DATETIME and CIF_GEN_CONVERT_TIMESTAMP

hi guys,
may i know what is the purpose and different between CIF_GEN4_CONVERT_DATETIME and CIF_GEN_CONVERT_TIMESTAMP?
another question is sy-datum is client dependant date?
thanks.
BK.

First FM OUTPUT is {UTC time stamp in short form (YYYYMMDDhhmmss)}
Second FM used based on plant it will give Plant date
CALL FUNCTION 'CIF_ORDER_TIMEZONE_GET'
       EXPORTING
            IV_PLANT    = L_PLANT
       IMPORTING
            EV_TIMEZONE = L_TIMEZONE.
CALL FUNCTION 'CIF_GEN_CONVERT_TIMESTAMP'
       EXPORTING
            IV_TIMESTAMP           = I_EXPLOTIME
            IV_TIMEZONE            = L_TIMEZONE
       IMPORTING
            EV_DATE                = E_R3_DATE
       EXCEPTIONS
            TIME_CONVERSION_FAILED = 1
            OTHERS                 = 2.
IF SY-SUBRC <> 0.
    E_ERROR = CON_X.
    CLEAR E_R3_DATE.
ENDIF.
If it is useful please give me reward point.
Thanks
Murali Poli

CIC0 Partner determination different between crmd_order and CIC0

Hi experts,
We have a problem with the partner determination. We have a partner who has relations with several other partners. In the partner determination procedure, we have indicatied that the partner needs at most one occurence and a selection limitation of 1. There is also an access sequence that makes sure that the right partner is found.
This all works fine in the CRMD_order transaction. You get a list of partner to choose from when you enter the main partner. Unfortunately, this does not work in the CIC0 transaction. In this case the system takes the top partner of the list.
Does anyone know why partner determination in CIC0 seems to ignore the setting of selection limitation and occurences? Why is this different between crmd_order and CIC0? How can we make it the same?
Thank you for your input,
kind regards,
Ragina Mahadew

Hi Ragina, welcome to SDN.
My opinion is that main purpose for that, was to speed up the interaction registration by the call center agents.
But if you want to display the partner selection pop-up in CIC0 t-code, you can try to implement note 487734 for that.
Hope that helps!
Kind regards,
Garcia

Shortcut to switch between Normal and Preview

What would the shortcut be to toggle easily between normal and preview views?
Thanks,
Luca

"w". Making sure, of course, that you don't have the text tool active.

What is different between #INITSEG and INITSEG in file bootsect.s?

I read the file bootsect.s,I think the INITSEG is constant,
and I think #INITSEG and INITSEG are always equal 0x9000,
but why are they different usage?
Look:
.text
BOOTSEG = 0x07c0
INITSEG = 0x9000
entry start
start:
mov ax,#BOOTSEG
mov ds,ax
mov ax,#INITSEG
mov es,ax
jmpi go,INITSEG
I want to know what is different between #INITSEG and INITSEG?
How to use #INITSEG and INITSEG?

I think you are currently mixing up the two definitions. I think the assembler here uses the hash prefix (#) to declare values and a clean number for addresses and offsets.
... http://www.oldlinux.org/Linux.old/kerne … bootsect.s
BOOTSEG = 0x07c0 ! original address of boot-sector
INITSEG = 0x9000 ! we move boot here - out of the way
start:
mov ax,#BOOTSEG ! set register ax to #BOOTSEG = value 0x07c0
mov ds,ax ! set register ds to register ax = value 0x07c0
mov ax,#INITSEG ! set register ax to #INITSEG = value 0x9000
mov es,ax ! set register es to register ax = value 0x07c0
! ds and ax cannot be filled directly, the value has to be set to the accumulator register (ax) first I think.
! Thats the reason for 4 lines instead of 2
mov cx,#256 ! set register cx to #256 = value 256
sub si,si ! set register si to 0
sub di,di ! set register di to 0
rep ! call the command in the next line
movw ! move cx (256) words = 512 bytes from ds (0x07c0) to es (0x9000)
jmpi go,INITSEG ! jump to the address go + 0x9000. go is the offset of the label "go" to the start of the moved memory segment
go: mov ax,cs ! here is the label "go"
Edit: That should be as86 (man as).
Last edited by progandy (2013-02-21 13:25:03)

Different between worksheet and preview

Similar Messages

Maybe you are looking for