Different boot locations

Hi all,
Just wondering how i go about setting up the computer to ask which OS i want to load up... eg. i have the 64bit XP on one HD and Win2k on the other. I would like to be able to just select which one from a menu, is this possible?
cheers
JJ

well one will be set as the first boot device in bios, and thats the one you want it to auto boot to, then there should be a button you can press to choose a boot device, i think its F8 on my Neo Fis2r, it should tell you it as it goes thru bios, at the same time it says to press DEL to enter setup. As for the menu i think you're after, its only available if you update windows and choose to 'keep' the existing op sys, then it comes up with the menu you have 5 seconds to choose etc.

Similar Messages

NAC version upgrade from 4.5.x to 4.7.1-in different geographical location

I have more than fifteen CAS’s in different geographical location (state) and controlled by CAM HA that is located in another location (state). I’m currently running NAC version 4.5 and planning to upgrade to 4.7.1. due to Windows 7 compatibility problem. My question is that, what is the easiest way to upgrade to 4.7.1 without visiting each location to upgrade CAS’s? Is there away to push the new version from the CAM? Visiting each location is not that convenient. Please let me know.
Thanks,

Dereje,
Unfortunately for upgrading to this version you need the CD in the box and to reboot from that CD. Reason is that we're changing the underlying OS from Fedora Core to CentOS and that requires a complete re-install of a lot of RPMs which isn't possible without booting from the CD.
HTH,
Faisal

Picking quantity from a different storage location during batch split??

Hi Gurus,
Have an issue with doing batch split in a delivery with batches from several storage locations.
Have delivery XXXXXX where I want to pick batches from several different storage locations.
I click on the batch split button and select the different batches and quantitys.
The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
Thank You for all Your help!
BR,
Christian

Hi Christian,
you have not jet got an answer -- here my suggestion.
You have to use the Userexit Mv50afz1. Here you can do some checks and you can do a popup, where you can sign the LGORT, where the batch is.
In any case, you need an ABAPer
In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
If nessesary create an ylips- Line of the position.
Use an assign-command to avoid the change of the index.
hans

How to define namespace with one XSD using in two different DB-Locations ?

I'm not clear,How to define namespace, targetnamespace, schemaLocation or NoNamespaceSchemaLocation
when using one common schema.xsd-definition
in two different database-locations for exchange xml-documents?
when insert xml-document I've got an error ORA-30937
do you have an good exsample ?
thanks
Norbert
schema :
<xs:schema
xmlns="http://sourcehost.com/namespace"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:oraxdb="http://xmlns.oracle.com/xdb"
targetNamespace="http://sourcehost.com/namespace"
xml-document :
xmlns="http://Sourcehost.com/namespace"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:SchemaLocation="http://sourcehost.com/namespace http://desthost:8080/sys/schemas/PUBLIC/ADRESSEN.XSD">
SQL> insert into ADRESSEN values
(XMLType
(bfilename ( 'XMLIMPORT_DIR', 'adressen.xml')
, 0 )
--> error :
ORA-30937: No Schemadefinition for "SchemaLocation" (Namespace "http://www.w3.org/2001/XMLSchema-instance") in übergeordnetem Knoten "/ADRESSEN"

Norbert
The schema location used to register the XML schema with XML DB does not need to be a valid URL for accessing the XML Schema
I can use the same URL , for instance
http://xmlns.example.scom/xsd/myXMLSchema.xsd
on machines dbserver1, and dbserver2. The only reason some people choose to use the hostname / portnumber convention is that this makes it possible to validate the XML Instance documents against the copy of the XML schema stored in the XML DB repository using an external tool like XMLSpy without have to add entries to XMLSpy's OASIS catalog files.
I am concerned about the message you are getting. That's not correct AFAICT but I'd need to see the complete XML Schema and Instance to be sure.

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Hello, I'm new to this forum.
My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system, for the purpose of installing two different modalities of the same Epson Photo Stylus 2200 printer, one with the printer set to use the photo black ink cartridge for luster and glossy papers, and the other one using the matte blank ink.
This is because I prefer to simply change the startup disk when switching inks rather than having to delete and re-add the necessary printers. (This particular printer does not support ink cartridge switching under any version of Mac OS X.)
Photoshop is currently only used on this one machine. Obviously this intended scheme fits well within the EULA conditions.
My three questions are:
(a) whether there is any technical issue I have failed to consider,
(b) whether each copy of Photoshop on the same machine will have to be activated separately (in other words, is the activation tied to the CPU or to the boot volume drive?), and
(c) if the answer to the latter question is yes, whether this will count as one or two activations for purposes of later installing a single instance of the Photoshop 13.x ("CS6") upgrade on an Intel- MacBook, since obviously C6 will not run on my PPC Mac. Again in sum, will I be able to continue to run Photoshop 11.0.2 on two different volumes of the same PPC machine and the Photoshop 13.x upgrade on the laptop?
As further explanation, I would use Photoshop 13.x on the Mac-Intel laptop only in order to run ACR 7.x, but would keep my PPC G5 Quad as my photo editing and printing machine running Photoshop 11.0.2, since an upgrade of my desktop machine to a comparably powerful Mac Pro is simply not an option for both financial and technical reasons (the Classic environment is essential).
Any and all input and guidance will be appreciated.
Message was edited by: station_one

Thank you for the lightning-fast response—and on a Sunday morning too!
MichaelKazlow wrote:
…Is it technically a violation, that is something I'd leave Adobe to answer.
From my previous visits to other forums as a lurker, I was under the firm impression you were in fact an Adobe employee, Mr. Kazlow. I hope that is still the case and you are only referencing your participation in these user-to-user forums as a volunteer, not as an official representative of the corporation.
Much obliged.

How to Setup a JSP to Run on Different Physical Location than OC4J Defaul

I am trying to setup a development environment for jsp application development in Oracle 9ias Release 2 for a development group. I followed the steps outlined in NOTe:167960.1 using both EM Website (creating a OC4J and editing server.xml and defau*.xml files) and DCMCTL (Doc ID: 185635.1) utility. OC4J app is coming up only partially which does not work.
Is this possible to "Setup a JSP to Run on Different Physical Location than OC4J Default Home" in Oracle 9ias Release 2 ?
Appreciate insight
Thanks
Subu

I was finally able to get it up and running... I commented out all the apple specific lines in smb.conf until I was able to successfully finish the driver copy process via the Windows driver wizard. The line in the /etc/smb.conf which was causing this weird problem was:
vfs objects = notify_kqueue,darwinacl,darwin_streams
I have no idea what this line is about. However after commenting it out the driver installation immediately started to work. I cross checked it by adding the line again and viola the problem was back - so it can be broken down to this line...
As I've found some other comments to this line in the internet I guess I will go for the smb.conf changes described in this article:
http://blog.djmnet.org/2009/02/09/macs-needing-unix-network-geekery/
Cheers
jogi4mac

Problem when Different Sorage Location

Hi all,
Here i have one report which fetch data of material consumption. Report working properly. But here i have one Item like OIL and when this material use from two different storage location for making one Item. this time. My report fetch two time quantity value in ALV. means i am not getting sum of the use material like OIL which is use from two storage location.
So can u please kindly tell me how can i put If condition in my below coding . and this condition can i put on which table and which filed. Kindly tell me please.
My code is Below.
SELECT a~budat a~mblnr b~matnr b~menge b~bwart b~charg
         INTO CORRESPONDING FIELDS OF TABLE it_rawmat
         FROM    mkpf as a inner join mseg as b on a~mblnr = b~mblnr
         where b~bwart = '261' and b~werks in werks and b~matnr in matnr and a~budat in budat.
IF sy-subrc 0.
    MESSAGE ' No Data For This Selection' TYPE 'I'.
    SUBMIT ZPP_RAWMAT_CONSUMPTION VIA SELECTION-SCREEN.
ENDIF.
LOOP AT it_rawmat.
    select single maktx
      from makt
      into it_rawmat-maktx
      where matnr = it_rawmat-matnr.
    select single matnr menge charg
      from mseg
      into (it_rawmat-matnr1, it_rawmat-menge1 , it_rawmat-charg1)
      where mblnr = it_rawmat-mblnr AND bwart = '131'.
      SELECT SINGLE maktx
        from makt
        into it_rawmat-maktx2
        where matnr = it_rawmat-matnr1.
      SELECT single matnr stlnr
       from mast
       INTO (it_rawmat-matnr3, it_rawmat-stlnr)
       where matnr = it_rawmat-matnr1.
       select SINGLE menge
         from stpo
         into it_rawmat-bomit
         where stlnr = it_rawmat-stlnr and idnrk = it_rawmat-matnr.
      if it_rawmat-bomit 0.
          it_rawmat-bom_prcntge = ( it_rawmat-bomit * 100 ).
      endif.
      CONCATENATE IT_RAWMAT-MATNR IT_RAWMAT-CHARG INTO IT_RAWMAT-objek.
       SELECT SINGLE CUOBJ
         FROM INOB
         INTO IT_RAWMAT-CUOBJ
      WHERE OBJEK = IT_RAWMAT-objek.
IT_RAWMAT-OBJEK1 = IT_RAWMAT-CUOBJ .
SELECT SINGLE ATWRT
       FROM AUSP
      INTO IT_RAWMAT-ATWRT
     WHERE OBJEK = IT_RAWMAT-OBJEK1.
Thanks
keyur chauhan

not answer

Movement type for blocking to a different storage location

Hi Gurus,
Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
Regards,
Kumar

Hi Kumar,
344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
Better use 343 for transfer posting from Block to Unrestricted.
If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
Then try do to TP for different storcge location for same plant with 343.

QM/MM: Stock transfer from QI to QI in different storage location

Hi Gurus,
I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
I dont want to create another inspection lot and dont want usage decision.
Can anyone suggest me the solution?
Thanks
Shiv

Hi Laxman,
Thanks again for your suggestion to use QAC2.
Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
Thanks
Shiv

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

Oracle Portal Development from different geographic locations

Hello,
Have anyone done the development with Oracle Portal from different geographic locations, our customer want to know is there a way we can develop Oracle portal application from different geographic locations and merge it one place.
One reason is because the portal is in the database. If you have two separate groups work to build a single portal, it reason that each team would have their own installation. When these two groups are done (or periodically), the development efforts must be merged into the final complete portal. Is this possible using Oracle Portal (merging portal installations)?
Second reason is that typically other systems owned by the customer are exposed or accessed by portlets. Access to these portlets would probably be required for development. If nothing else then for unit testing.
How do you typically see off-shoring done with Oracle Portal, if at all? Or am I incorrect in my thinkings. How does the Portal meta-data stores the portal configurations is it possible to merge different portal schema into one and make it the main portal environment.
Please let me know if anyone successfully done this. Your comments would be greatly appreciated.
Thanks,
Kathir

Already replied in Oracle Portal Development from different geographic locations
Cheers,
Pedro.

PRD and DEV server on different physical locations

Hi
We are in a situation which we planned to host our production and development servers at different geographical locations. Both locations have high speed internet and static IPs.
Kindly advice me how to configure transport management in this scenario.
Our config is ECC6.0 - DB6-WIN2008.
Regards
naveen

Hello Muthu,
Are these boxes on the same network ?? check by creating a RFC from your DEV to the PRD and test if its successfull.
If the RFC test is successfull then you can proceed with the TMS configuration. It wil not be any problem.
Best Regards
Niraj

Could WM setup same location in different storage location type ?

Hi
Now we have same part but which is bought from different vendor by currency RMB or USD.
We hope when we receive material, it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
If there is any advice, please tell me , Thanks
Thanks
Alice

Hi, Expert
Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
We use migo to receive these mateirals , most are in WM module, Some in IM module. Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails.
To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
Thanks
alice

How to run MRP on different storage location level ?

Dear Experts,
Need your valuable guidance to solve the below requirement form the client-
1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
           For sake of example: in SL01 he wants the safety stock for particular material set to 5
                              In FS18 he wants the safety stock set to 2
                              In FS15 he wants the safety stock set to 1
Kindly tell me whether it is possible? & guide me how to do it.
2) Also tell me how to run MRP on a storage location level?
           This is because after maintaining different safety stocks for one material in different storage locations, is it possible to appear each storage location with their differing safety stock levels?
I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
Kindly guide me for the above issue
Thanks in advance for your support.
Regards,
Mehul

Hi Umashanker,
Thanks for your suggession . Accordingly I have resolved the issue.
Regards,
Mehul

Different boot locations

Similar Messages

Maybe you are looking for