Different btn dotmatrix print and laser print

hello sap experts
how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
thanks in advance
regards
Jenny

Hi,
Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
Refer note:724904 for instructions printing in sap b1using dot matrix printers.
More over you have to set the alignment(as often it gets changed).
And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
I suggest you to go for laser printer if it is affordable by client.

Similar Messages

Different Colors when printing from Photoshop and InDesign CS3

Different Colors when printing from Photoshop and InDesign CS3
I have the following problem:
When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
The manufacturer however told me to let the PostScript printer handle the colors.
When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
·Photoshop CS3
·InDesign CS3
·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
·Printer: Xerox Docucolor 3535
·Printer profile: ISO Coated
How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
Thanks a lot!

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers. When I switch usb cables to use the other scanner in I get the message saying there is no scanner installed. I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

Just bought a new iMac, with Lion, for my wife. When is was wifi with her old iMac on line with it's printer, HP C6200, no problems printing. Now that it is by itself it does not recognize the C6200...It recognizes my laser hp 1012 and laser hp 6300

Just bought a new iMac, with Lion, for my wife. When is was wifi with her old iMac on line with it's printer, HP C6200, no problems printing. Now that it is by itself it does not recognize the C6200...It recognizes my laser hp 1012 and laser hp 6300 but will not print to them wanting an autenication

How is the C6200 connected to the iMac, is it via USB or Wi-Fi? If it's via Wi-Fi please make sure it's connected to the router using the printer's Network Wizard. Then click System Preferences - Print & Scan and assuming the iMac is on the same network as the printer, if it is the printer should be seen. If it's not then click the + sign and add the printer. Apple provides instructions in Printing Overview OS X Lion

Issue in Printing Smartforms through Dotmatrix Printer

Hi,
I have a Smartform which has many tables. When I print it through a Laser printer it comes out fine. But when I direct it through the Epson 2090 a 24 pin head dotmatrix printer some lines in the tables are not getting printed.
May be it's that there is no room for printing line. What will be the best solution for this?, What's the best Font & Unit of Measure I should use? Or Anyother solution?
Thanks,
Kishan

Hi,
I have a very similar problem to the original posting. I have a SAPScript form that print fine on a HP Laser Jet printer. But we cannot get it to print correctly on a Epson DOT Matrix. We tried two different models and get the same bad results. The print size is smaller on the DOT matrix even though I am using the following printer initialization
# set to 10 CPI
0x1B0x50
# select LQ quality
0x1B0x780x01
# select non-proportional spacing
0x1B0x700x00
# set left margin to 0
0x1B0x6C0x00
# set right margin to 85
0x1B0x510x85
# cancel bottom margin
0x1B0x4F
It is also printing a hex value on the first line and has top, side, and botton margins of about 3/8 inch So apparently, it is ignoring the printer initialization. Note, I had also tried the same initializations using \e in place of the Epson Escape hex value \0x1B
Message was edited by: Bob Ackerman

Printing is very Slow on DotMatrix Printer

Hi,
I need to print the report directly on locally attached printer without appearing the printer selection screen. For this I implement the following code
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, RUNTIME); --- BATCH, RUNTIME
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, PRINTER);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT,'PDF'); --- 'html'
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'repserver');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_OTHER,'paramform=NO');
After execution , it gives the error " FILE DOES NOT BEGIN WITH '%PDF'
but when I simply use
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
Report is open in PDF format successfully.
1) How can I take the output directly on the printer.
2) How report can be taken fast on DotMatrix Printer,
( when if I take the print out from the PDF generated reports on only DotMatrix Printer it takes huge time, not the other laser printer. )
Kindly Help me
Regards.
Priya

I am printing to a R2400 with the same issue. I have everything up to date software, firmware, etc. I just updated to OS 10.4.5 and this actualy increased the speed by about 25% but it's still slower thtn should be expected.

Print-control commands for dotmatrix printer

dear all,
Here my requirement is we are using datamax printer ( dotmatrix printer) for printing script and i need some commands for that.
please reply soon.
thanx inadvance

Hi Don
Thank's for your reply.
That's excactly what we want to do: within the same report we'll use different trays and/or number of copies.
In the meantime, we talked to the manufacturer of the ELP module. They told us that the print stream contains parts of the correct sequence, but unfortunately the trailing two closing paranthesis are missing. For that reason, the command string is not recognized as valid command and is therefore printed "as is".
We tried to add additional characters after the trailing paranthesis, again no success...
The next step is to use the newer CR runtime, as Nikhil suggested in his answer.
Weird problem...
Regards
Daniel

PDF output generated by XML Publisher is not printing in Dotmatrix Printer

Hi All,
We have designed a template for a particular concurrent program to print it's output format in PDF. The concurrent is running fine and it has produced the output in PDF format. But we are unable to take a printout of the output in our Dotmatrix printer (Epson FX2175). We configured PASTA driver as per the Metalink Note ID: 739186.1. By using this Configuration we are able to take printout in our hp LaserJet 1320 printer. But not able to take printout in Dotmatrix printer. If anybody faced the same problem and find a solution please share here. Any help would be appreciated.
Thanks in Advance,
Regards,
PLS
Edited by: user10088016 on Oct 31, 2008 9:41 PM

Hi,
I have a similar issue, where the output is coming with some junk characters while printing to the printer. I contacted my System Administrator regarding the PASTA driver being installed on the printer and it is already done, but I am still having the issue.
I am trying to print it from the Bursting control file, using following command : <xapi:print id="LOCALPRINT" printer="ipp://192.168.1.73:9100" copies="1" />
Can anyone help me out on this.
Thanks and Regards,
Sumanth

Page advancing problem in dotmatrix printing

Hi Experts,
We are trying to print 6 X 2 Inch sticker using dotmatrix printer in smartforms,
For this I have defined a page formate assigned it to Device type and under the initialization written the following code
reset
\e\0x40
set line spacing 6 LPI
\e\0x32
set page length to 2 inch (=12 lines at 6 LPI)
\e\0x43\0x0C
print is coming properly in one sticker ie, 6 X 2.
but after printing it is advanding 4.5 sticker, How can I stop this page advancing ?
Note : sticker is in continuous roll.
Regards
Bikas

Hi Bikas,
We are facing similar issue with a custom page format created in SAP (9.5" x 7").
Issue Details – While printing the Smartform output on Line matrix printer, the printer ignores the page format assigned in the device and takes more page break than expected. Looks like it considers Letter/DINA4 page format instead of the custom format designed.
We are using SAPWIN device type and assigned the custom page format to the device type. We are not seeing any difference even after implementing the similar code mentioned above in your thread in "Print Initialization" action.
Please provide your inputs in this regard.
Thanks,
Surya

DotMatrix Printing from CR

I'm Using Crystal Report XI R-2 And VS.Net 2005 for my Development.
I need to provide Invoice Printing on Dotmatrix Printer.
Kindly advise me how to take fast printing on Dotmatrix.
Awaiting ur kind help.

The .NET framework only supports True-Type fonts. When exporting to text there is no font information stored so it is a true pure-text document that the printer can use its internal fonts to print out.
However when exporting to text font information is retained and as the true-type font is probably not your printer font the printer will take longer to print it. Even if you select your printer font for the fields in Crystal, if it is not a true-type font supported by the framework it will be substituted at runtime for a true-type font.
This unfortunately is out of our control as it is the way the .NET framework behaves.
Trevor

What is the different between adobe reader and adobe acrobat reader?

what is the different between adobe reader and adobe acrobat reader?What are the procedure to download a Acrobat reader?

Good day,
Adobe Reader is a free application we offer for viewing and printing PDF files. Many years ago, it was known as Acrobat Reader. You may still see some users refer to Adobe Reader as 'Acrobat Reader'. Old habits are sometimes hard to break!
You can download Adobe Reader by visiting: http://get.adobe.com/reader/
Kind regards,
David
Adobe Systems

Look different in Design view and Browser Preview

Why do it look different in Design view and Browser
Preview?

"MA_DAVIDLEE" <[email protected]> wrote in
message
news:e39mte$las$[email protected]..
> thank you for reply and the url is www.cipr.com.tw. you
can see the
> navigation position is different in Design view. Thank
you!
>
How could I see the Design view? Can you post a
screenshot?

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now

My friend wanted to create a new iCloud account that was different to her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now what can I do to fix it she has paid or apps and songs and of she makes another account everything will be lost.
Need help please :) thanks

Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

TS1292 My iTunes will not work at all I've had 7 different people try it and its still not working

My iTunes will not work at all I've had 7 different people try it and its still not working

Cconnect it to your computer with the latest version of iTunes installed.

Quantity is different from sale order and delivery

Hi,
Gurus,
Quantity is different from sale order and delivery.
I identified the Material in the sales order, the item category for this material as BOM.
I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
Guide me GURUS.
Thanks and Regards,
ANAND

Hello Rumar
I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

Different btn dotmatrix print and laser print

Similar Messages

Maybe you are looking for