Different Chapter sets on same track/story

don't know if this question is asked before.
I have a footage of a story with 30 chapters, & there are 7 songs within the footage. Song 1 is somewhere in chapter 2, Song 2 is in chapter 7 etc.. which to be access on a separated menu. After created a Story for playing only the 7 songs in sequence, the chapters of the 7 songs is added to chapters & turn out there become 37 chapters. Is it possibe to skip those Songs chapters?
Many Thanks
Blanco

Hi Blanco - welcome to the discussions!
When you added the additional chapter markers for the songs they will be in the track list of markers unless you remove them.
If you want a list without those extra chapters, you create a new story and add the original 30 markers in to it, leaving out the new 7 for the songs. You point your menu button to play the track at this new story instead.
But, even if you leave the new markers in place in the track the playback won't be affected. If you have a chapter menu then you can add the new seven markers after creating your chapter selection menu and the new markers won't be included... since the songs are already in the track and marked by other markers they will play through anyway.
In short, I'm not clear as to why you need to remove the new 7 markers, and any extra info you can provide will be helpful!

Similar Messages

  • [svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

    Revision: 4290
    Author: [email protected]
    Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
    Log Message:
    Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-288
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • ITunes 12 is making 1 album become several different albums with the same tracks.  How do I combine them again?

    I had an issue in past versions of iTunes, where I would rip a CD and, for some reason, iTunes would turn it into several different CDs instead of just one, even though everything about the album was the same (as in same artist, same album name, same year, etc).  It seems as though that issue has returned and one album with 6 tracks is now 3 albums (1 album has 1 song, another has 2 and the third has 3).  Yet, it's all the same album.  I re-entered the data for the album name and artist, but it doesn't work like the previous versions.  Anyone have any ideas why this is happening (other then bugs) or how to fix it?

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • In  iTunes: why different run times for same track?

    I have occasional repeats of the same given track stored in iTunes. Sometimes, the 2 identical tracks show different running times. This happens when one track came from the Net (downloaded before I started using iTunes, then imported into iTunes) and the other comes from a commercial CD. Do you know why the differing times? FYI: In each case, I have checked the endings of both tracks; they are identical, so the music is the same even though one track is rated to run [much] longer than the other. Also, in "Get Info" there's a way to change the running time of a track, but this is no solution: if I enter a shorter run time, the track will truncate itself, and finish playing before the proper end of the song -- if I enter a longer time, I get dead air after the end of the recording. Any ideas?
      Windows XP  
      Windows XP Pro  
      Windows XP Pro  

    "will iphone users in Singapore have access to application from other countries? "
    No. You can buy from the itunes store in the country in which you reside.
    Each country has the same rules:
    "SINGAPORE ONLY. The Service is available to you only in Singapore and is not available in any other location. You agree not to use or attempt to use the Service from outside of the available territory. iTunes may use technologies to verify such compliance."
    http://www.apple.com/legal/itunes/appstore/sg/terms.html#APPS

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

    Hello,
    CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

    http://support.apple.com/kb/ht1495
    You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

    I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
    Below is my iMac settings.

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • Different Character sets (Codepages) in the same Login

    Hi,
    I need to enter different character sets (Russian and English) in the same login and save the different characters to SAP database tables.
    The codepage for Russian is different from English codepage. I have Russian codepage language settings on both Windows and SAP. Can anybody let me know how to proceed with this.
    Any pointers on this would be really helpful.
    Thanks and Regards,
    Sirisha

    Hi,
    I need to enter different character sets (Russian and English) in the same login and save the different characters to SAP database tables.
    The codepage for Russian is different from English codepage. I have Russian codepage language settings on both Windows and SAP. Can anybody let me know how to proceed with this.
    Any pointers on this would be really helpful.
    Thanks and Regards,
    Sirisha

  • ITunes match tracks different volumes from the same album

    Using iTunes Match.  Among other reported problems, after downloading Matched tracks to my master iTunes library to replace lower bitrate versions, the new tracks from the same album have different loudness or volumes between the tracks.  Is this because iTunes Match is matching the songs to different versions of the same album?  Where some albums have been 'remastered' or such, that the recorded volume between the albums is different?  But instead of matching tracks to the same version of the album, some are being matched to different versions of the same album?
    Quite offputting to listen to a single album where track to track loudness changes suddenly.
    PS, I'm not using SoundCheck on my Mac.

    Same problem here. I'm an "album" kind of music fan and when I'm listening matched albums that the sound quality and voulme changes I get really put off. Case in point B-52's self-titled album: tracks 1,2, 5 & 7, nice and loud; 3, 4, 6, 8 & 9 tiny sounding in comparison...Hello?  So far iTunes Match is not worth my money. I'd like to hear form an Apple iTunes Match repersentative to know if this issue will be resolved. As it is, is not very useful. Please fix the problem. Also many of my albums show that a track or a few will not be matched but uploaded to the cloud which means more of my albums will be spotty sounding as tracks will have different bit rate, etc. There is no real excuse for not matching whole albums as oppose to single songs. I read somwhere the 'typical" case of the Beatles "Abbay Road" album not matching "She Came In Through The Bathroom Window" on most users. I think is silly to say the less. Albums matching not single songs, please!!!

  • Loading the different result sets in the same sequence for the target table

    Dear all,
    I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
    I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
    But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
    I am looking to load data like this.
    If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
    But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
    how can we achieve this in owb?
    any solution for this will be appreciated.
    thank you
    kumar

    My design is like following
    SRC1
    ---->Join1--------------------------->Target1( Table X)<-----Seq1
    SRC2
    SRC3
    ----> Join2----------->Target2(Table X)<----Seq1
    SRC4
    -----> Join3 -------> Target3(Table X)<-----Seq1
    SRC5
    Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
    If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
    But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
    As per your comments :
    you want to load 3 sources to one target with same sequence numbers?
    yes
    Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
    No
    can you please tell me how to approach for this?
    Thank You
    Kumar

  • Importing Markers to the same track from 3 different files

    Hi all,
    This is a marker question:
    I have about 60 minutes of video and I originally have it in 1 big file (export from FCP, then compressed with chapter marker so that they will be imported into DVDSP). I have no problem with importing the markers from FCP->Compressor->DVDSP.
    I broke up 60 minute file into 3 smaller files (so that I don't have to re-export/compress the whole 60 minutes worth of material when I do revisions). However, when I try to import these 3 smaller files into the SAME track, only the first one that I import carries over the chapter marker, the 2nd and 3rd don't.
    What can I do to get the remaining markers imported from the 2nd or 3rd files?
    Any help appreciated!
    Aa

    Hi all,
    Just figured it out: I right click on the clip and the choose "Import Embedded Markers". So that solves the problem. Just unsure why it didn't do it automatically.

  • Different Chapter ID for various assets in same excisable plant

    Dear SAP guru,
    We're currently using 4.6C.
    Currently we have a scenario where different category of asset will have different chapter id. And the same machinery will have different chapter id between local and import. In J1ID, 1 plant can only have 1 chapter id when material number is blank. If 1 plant have several chapter ID's then the system would not know what Excise percentage to extract from J1ID during the creation of Purchase Order. Can you advise how to resolve this scenario? Thanks.
    regards,
    Jules

    Hi,
    Then in that case create Material code for asset and assign chapter id in J1ID,
    shakir
    Edited by: Shakir on Jan 14, 2008 2:16 PM

  • Interactive Reporting Reports - Same Rpt Format, but Different Result Set

    I have created a report using result set 1. I've saved that, but want to copy it & use the same format/columns to create a new report using a different result set (the result sets have the same data, but one is filtered). Is there an easy way to change the name of the result set being used w/o re-creating the entire report columns & all?
    Terri

    I am in the Dashboard Studio - Optimize Utility. When I select that report (or any of the others), the Reparent button is grayed out on the toolbar. I've also tried right-clicking on the report and it's grayed out there as well. Any ideas?

  • Call logical links with different enhancement sets on the same business role

    Hello,
    I am trying to create a business role that contain logical links with different enhancements. I know how to choose an enhancement for the business role but I can't find a way, if possible, that one business role does it.
    I know how to give an option to choose different roles for the same user, i'm looking for a way to do this in the same window
    Thanks,
    Noa

    does not matter anymore

Maybe you are looking for