Different clients simultaneously

Hello,
I have a Wireless Router and Airport Express.
If I link the Airport Express via WDS with Router, the two devices may have clients individually, or just they will the Airport Express?.
Best regards,
Angel

They will all be clients of your router.

Similar Messages

How to connect different clients of same SAP Instance

Hi,
I have a question abour CPS 7, Basic- / Free of Charge Version
I know that this version is restricted to have only one SAP Instance per Isolation Goup, but how about different clients of the same Instance ?
Is it necessary to create an Isolation Group for each client of the same instance ?
We actually have 1 isolation group with 1 Instance and 1client .
Trying to create a second XBP Connection to another client fails then saving the changes with error:
"JCS-102120: SAP System DI1.DI1_045 should be isolated but is not. Show error details"
I didnt find a concrete statement in the Installation - and in the Admin Guide.
Regards
Frank

Hi Frank,
This is correct, there is one client per isolation group. The free version works similar in this respect to SM36/SM37: jobs are defined in each client individually and independently.
Regards,
Anton.

ERROR WHILE testing WEBSERVICE IN TWO DIFFERENT CLIENTS

hi all
i have developed a proxy and try to test web service in wsadmin tcode through two DIFFERENT CLIENTS.
FROM CLIENT 1 IT IS SHOWING THE SUCCESSFULL RESPONSE
BUT FROM CLIENT 2 IT IS SHOWING THE FOLLOWNG ERROR.
No implementing class registered for the interface (ABAP interface, request message , request message, namespace )
THANKS
praveen kalwa

hi marten
can u describe in brief what i should do in the sxmb_adm in the both client ..
why because i could not find any thing
PLS DO THE NEED FULL
thanks in advance
PRAVEEN KALWA

Different Service Desks in different clients in the same Solution Manager?

Hi
Is it possible to place different Service Desks in different clients in the same Solution Manager?
Concrete we plan the following scenario:
- Division 1
-- System 1,2,3, etc.
-- Service Desk in client 100
-- Monitoring for the whole trust in client 050 (still exists)
- Division 2
-- System 4,5,6, etc.
-- Service Desk in client 200
-- Monitoring for the whole trust in client 050 (still exists)
Is it possible to realize this scenario or are there any restrictions?
Thanks & Regards
Andreas
Edited by: Andreas Städler on Mar 19, 2008 5:52 PM
Edited by: Andreas Städler on Mar 19, 2008 5:54 PM

hi Neil
did u solve the problem still Struck let me know
we can access the same iview n no of clients. let me know any do u have any queries and other infomation
bvr
Edited by: bvr on Dec 2, 2008 6:32 AM

To check the difference between 2 programs from 2 different clients

standard program which you can use to compare difference between sources codes of 2 different programs

Hi,
use remote comparision to compare the program with two different clients..or use TCODE-SE39
Regards,
Nagaraj

Enhancements are not visible in different clients

Hello Experts,
I am facing a strange issue in my compoenent enhancements for IUICMD.
I have created an enhancement set ZCRM_IUICMD and assigned it to different clients thorugh BSPWDV_EHSET_ASG.
All my enhancements to componenet are attached to the above enhancement. Suddenly i can see that my enhancements
behave differently in two different clients.
I have verified the repository objects like classes & methods and also UI configuration. It remains same in both clients.
Let me know if you have faced similar problem and your solution to that.
Thanks in advance................
Best Regards,
Prabahar

Hi Saumya,
I am enhancing the component view IUICMD/DetailAccount. Here i have created a new context node for BuilheaderSearch.
I am using using context node attribute ID_TYPE in IUICMD/DetailAccount & Provided F4 help for that. Now i can see Input help in client 200 & not able to see that in client 210.
I have assigned my enhancements to both the clients 200 &210. In both the clients UI Configuration remains the same.
Hope it gives you the details that you are expecting.
Best regards,
Prabahar
Edited by: Prabahar N.R on Sep 10, 2009 1:10 PM

Different Client Versions in OWB 9i and 10g

Hi,
Our client is using 9i OWB Client Software, and we are planning to use OWB10g Client Software on Windows Platform.
Will there be any compatability issues while moving from 9i OWB Client Software to 10g Client software.
And what are other parameters we need to consider, if possible please mention any documents links available.
Kindly let me know the pros/cons in this model .
Here my main question is will there be backward compatibility, i.e repository in 9i database need to connect by using the OWB 10g client?
With Regards,
Kranth...
Edited by: user8536050 on Jan 18, 2010 1:44 AM

Hi,
you cannot use different client versions on the same repository. If you want to use owb 10g, then you have to upgrade the repository to 10g. Then you can only use 10g clients, owb 9i clients cannot connect to that repository.
Regards,
Carsten.

Error When Run ABAP Query in Different Client

Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
Hadi

Hi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK.

Livecache on different clients

Hi,
I am using APO for two different clients. It is working fine for the original one, but I am having different issues (see below) when I CIF the transtactional data.
What should I consider for Livecache being shared on different clients?
Issues
- Multi-level error propagation carried out
- Error when reading ATP delta records: Error calling function module /sapapo/cif_help_object_show in system AAQCLNT500 : Exception condition "CNTL_ERROR" raised. Message no. XC016
- Message no. SR053
- LC error;
Considerations already done:
- Logical systems
- RFC connections
- Same Business system group.
Any recommendation will be very valuable for me.
Thanks a lot.

Muhammad,
the installation is done in client 000.
You then do post-installation and configuration for each client - AC needs to do a connection to each client individually in order to separate the results (risk analysis, provisioning).
Frank.

Create a new branch On same OR different Client

Dear Experts,
Can anyone tell me the advantages and disadvantages of same vs different client, from FI & CO view, as we are having a new foreign branch in another country, should we use the same client or a different client?
For e.g.:
Client 100 Company A - present
Client 100 Company B - new
OR
Client 100 Company A - present
Client 200 Company B - new
Regrads,
Mohammad

Hi Mohammed,
It would be better to choose the first option ie, choosing the same client. Please refer the attachment which deals with this topic.
Same or different client
two different organization on one system
more than one company code
Warm regards,
Murukan Arunachalam

Comapring the smartform in two different clients!!

Hi Experts,
I have a situation, where I need to compare a same smartform in two different clients. As we can do the Remote comparison for the program, similarly how can we do it for smartform?
Thanks in advance.

Hi Ganesh,
Actually Smartforms are client-independent. So there is no question of same smartform being different in different clients.
Just check your SF once again.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Dev qas and prd set up with different clients

good day experts,
If I have 3 different clients in PRD, is it recommended to have 3 qas and 3 dev clients as well? For instance, 3 clients in PRD which are 500, 510, and 520; do I have to have 300,310,320 for qas and 200, 210, and 220 for dev? for we have difference configurations and settings on difference clients.
Please suggest! Thank you in advance!

Hi,
It is not mandatory that you have three clients in all system. General approach is as below:
1) Development System- Sandbox Client, Development Client, Golden Master Client
2) Quality System- Testing Client, Pre-Production client (not require always)
3) Production System- One Production Client (If there is any special requirement then you can create more client)
Thanks
Sunny

Calling a ESS WDJ COmponent with different Client no

Hi,
my task is to make ESS available on a different Client (100) instead of 001.
i was reading about the "Mapping Logical Systems" using the parameter sap-wd-arfc-useSys :
http://help.sap.com/saphelp_nw70/helpdata/en/af/84a34098022a54e10000000a1550b0/content.htm
I did the following :
1. Create a new JCODestination :
SAP_R3_HumanResources_MetaDataHNL and SAP_R3_HumanResourcesHNL with the new client.
2. Call the URL
http://<portal>:<port>/webdynpro/dispatcher/sap.com/ess~lea/com.sap.xss.hr.lea.appl.LeaveRequest?sap-wd-arfc-
useSys=SAP_R3_HumanResources:HNL&sap-wd-arfc-useSys=SAP_R3_HumanResources_MetaData:HNL
Result : i get a 500 internal Server error after the login for this client.
Test 2: The same with the default JCO Destinations : same error
Test 3: The same without the additional parameter : working
The JCO Destination is only SAP_R3_HumanResources when i looked it up the Content Admin Area for Web Dynpro.
What is the point i am missing ? Has someone done it successfully to connect to 2 systems per sap-wd-arfc-useSys ?
Regards,
Kai

Hi Arun,
the JCODestination Tests (Metadata) are successful.
The Assignment for ess~lea is only for :
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
It is a standard ESS iview. How and why should i assign additional JCODestinations ?
I overweite it per parameter sap-wd-arfc-useSys
Regards,
Kai

RFC Destinations for different clients on same host

Hi
I have an SRM and SUS on the same server and the clients are different. I have a flow from SRM to SUS and also back from SUS from SRM.
Do I have to create seperate RFC Destinations for different clients?
What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
Regards
Ajith

Hi Ajith,
Do I have to create seperate RFC Destinations for different clients?
>>> A set of RFC Destination, Port & Parnter Profile is used to connect two systems between one client of source system to one client of Target system. Eg. from clinet 100 of XXX system to clinet 100 of YYY system. So, you need to take this into account and create seperate RFC destination for each different pair of connections.
What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
>>>In PI, you need to create BS for each different client of SRM & SUS system.
I hope this helps.
Regards, Gaurav.

One file to two different folders simultaneously?

Is there a way to copy one file to two different folders simultaneously?
Maybe a script?
Drew

Thanks for the response Baltwo.
Maybe I shouldnt have said 'simultaneously'.
What I'm trying to achieve is this.
I drop a file into one folder and it automatically copies to ano folder (a redundant back up of the first folder)
Is that possible at all?
Drew

Different clients simultaneously

Similar Messages

Maybe you are looking for