Different color in lin in sapscript

hi
i want to put a line with an other color, like grey,in a sapscript of picking when the material have something wrong.
So can i do that? I can make a different line with caracter bold no problem but color i don't know
thanks for your answer
serge

In SAPscript coloured lines are not possible where as Smartforms coloured lines are possible.... but you can draw a grey shade background using box statement making INTENSITY 20 TW...
close the thread once your question is answered.
Regards,
SaiRam

Similar Messages

Multiple different colored vertical lines all over screen?

I have quite a few different color vertical lines across my screen. They are yellow, purple, blue, green etc. It started with just one or two and now there is probably close to 75, some tightly grouped and others here and there. Can anyone tell me what it is? Is my video card going out or something? Is there anything I can do to stop it?
Thanks

Hi all
I have a single red vertical line down the very left edge of the screen of my 2006 17" MacBook Pro. It has appeared over the last day or so and is there most of the time, although it occasionally disappears for a short while.
Do you think this could be a similar issue?
Thanks very much.

Dropped my iPhone 5 and now my screen is all different colors with black lines

i dropped my iPhone 5 and my screen was already cracked but I dropped it and now my entire screen is different colors and black lines going up and down it.

It will be one or the other dependant on what is found when they analyse the iPhone
From your description I would expect the $269 but ,who knows
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions

Combo chart - different colors for Bar/Line

Hi,
In a combo chart is it possible to have different colors for bar and lines......................In our report- combo charts the intersection of bar/line is NOT visible beacuse of same color.

Yes, I create a formula row with a zero in the first column. The row should be hiden. This has to be at the top of the grid and include the row in your data ranges for the chart.

Different color lines in tables?

Hi
I want to create a predefined table (tag) with lines of different colors. The table header is dark blue and I want to make the inside column lines white. But only in the header. The table body cells are white with black column lines. I don't want to insert a table first and then use the "custom ruling&shading..." every time I want to insert this table in my document.
Has anyone any solution to this?
BR/Björn

Can Frame save colored table rules and shading?
Hi,
Are there any Frame 10 users who can tell me whether Frame will save a table with colored rules or shading in Table Designer? I'm on Frame 7.2 and I've got the hang of the clunky UI. I designed a table layout with colored rules and shading, then used it to create a new table format. When I inserted a new table using that format, all the color reverted to black.
This is an ablility that Adobe should have implemented by now. If it does, then that gives me one more reason to get Frame 10 in this shop.
Yours,
Michael F
=======

I have a iPod touch 5th generation and when i turn on the device, its white screen with black lines and different colors

I can turn off the device naturally. But when i turn it on it shows all white with black lines and different colors. Is my LCD screen broken? If it is, can apple fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price

My brother dropped my iphone 6 on tile and its cracked and the screen is white with different colored lines down it. What do you suggest I do???

Cracked iPhone 6 screen and screen is all white with different colors going down it. What do I do???

Take it in for repair or exchange. Be prepared to write a pretty big check unless you bought AppleCare+.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

IPad 1 display with different color line

My iPad display shows with different colors here & there. Is that defect? Some web page is ok. But most of time you can see that.

Mountpa-
Your iPad may be defective, but is probably out of warranty. An Apple Store may exchange it for a flat rate. Look for an iPad repair center for a less expensive repair. You can find an Apple Authorized Repair Center at <Apple Authorized Repair Centers>, but non-Apple repair centers may be less expensive still.
First check to see if your color happens to be part of your iPad's wallpaper. Go to Settings-Brightness & Wallpaper to see how it is currently set.
One thing you can try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

I go on-line and the typing is blurring (different colors) had this before.

Had this problem before, and was instructed to delete a certain update, and it worked, but now it's starting to come back, not as bad, but will it get worse? the letters are different colors, and blurry.

Earlier this year there was a problem update that affected fonts in Vista but not Windows 7.
There was a Windows update a couple years ago that caused font display problems in Firefox on Windows 7 ([http://www.infoworld.com/article/2614344/microsoft-windows/windows-7-patch-kb-2670838-fries-firefox-fonts.html Windows 7 patch KB 2670838 fries Firefox fonts | InfoWorld]). Does that sound like what you might have uninstalled before? I'm not sure whether that is still a problem or whether Mozilla updated Firefox to work around it.

Different colored screens

Hello, both my friend and I own Iphone 4's. When we look at our screens, they look completely different. His has a very visible yellow tinted screen, and mine is more 'white' looking. I will post an image as soon as I can, but is this normal? Why are the screens such different colors?

the yellow tint on the screen that you mention could be the adhesive that hasn't been fully dried when it came out of the production line. Normally, as genius would also say is to try to use it for a week, and if it doesn't disappear you can go get a replacement, but they should dry out. So give it a week.

XY Graph overlay multi plot with different colors

Hi,
I want to do a cyclic X-Y plot in a for loop and plot the graph for each cycle in different colors.
I want a plot like XYgraph2 but with different colors and probably even without that tracing line. How do i modify my diagram?
Thank you for your time and efforts.
SUCHIT
Suchit Shah
Graduate Student
Electrical & Computer Engineering,
Northeastern University,
BOSTON
MA 02115
Certified LabVIEW Associate Developer
Solved!
Go to Solution.
Attachments:
block dia.JPG ‏45 KB
front dia.JPG ‏122 KB

Hi all! This is my first post
My name is Francesco and I'm programming a keithley for measure some FET
using labview 8.6. I plot my output data on a XY graph but I have several curves,
one for each value of Vgs. Looking in your forum I've found the code
MultiplePlots.vi (21 kb) posted by Darin.K about a month ago that use Multiple
plots and it is perfect for my goal because with this I can plot every curve with a
different color. The only problem is that I like to plot my data in real time.
The code, however, use a Loop with N=50, accumulates the values on the edge
and plot at the end of the Loop the entire line.
My question is if someone can explain me how to modify the code to plot the line
point by point, so in real time and not at the end o the loop because I need to see
the current values during the measurement and not only at the end.
I think that I need to move the XYgraph inside the loop. I try but without lucky.
Can anyone help me?
thanks and sorry for my very bad english.
Francesco

Changing the text in each dataGrid row to a different color

Okay I am going to try and be as clear as possible with this,
so bare with me.
What I am trying to do is make it so that when my
arraycollection objects that I have retrieved from a web service
are loaded in (by using the "dataProvider" attribute) my dataGrid
that some sort of code will take place changing the color of each
line of text (all the objects stored in the array collection are
string types) and display each rows text in a different color.
Now after looking into it, it seems the only way to alter the
color of the text is to use some sort of style or format but it
seems it only effects text in a "textArea, textField, textInput"
etc... SOOO I figured why not create a itemRenderer that contains
one of those and put it into the dataGrid... Which I did and still
can't figure out a way to make it so you can dynamically alter the
color based on a set of rbg values stored in a array the same size
as the rowCount of the datagrid.
so I am rather stumpped in what to do.. I DON'T want to
change the background color of each row, so alternatingItemColor is
out of the question, I just want the text displayed in each row to
be a different color.... And I want all this color changing to
happen either before the data is inputted into the dataGrid
(manipulating the arraycollection some how..) or when its all
already in there, it all needs to happen in code no user
interaction.
I was thinking perhaps maybe I could create a item Renderer
object that contains the compenent (the textArea in it) and just
make a array of item Renderer objects and pass those into the
dataGrid, but I don't think that is possible.
ANY IDEAS AT ALL!! On how to change the color of the text in
each row of the datagrid to a different color would be a HUGE,
HUGE!!! help. Or any info on how to setup a datagrid listener that
listens for when a object (a row) from the arraycollection is added
to the datagrid... Perhaps I could use that info some how to my
advantage.
email me, if you like I don't care I just need a answer to
this its driving me crazy! I can change the background row color
based on a array of rgb values but I can't change the color of the
item in that row based on array of rgb values, ARG!
[email protected]
thanx in advanced.

<mx:itemRenderer>
<mx:Component>
<mx:Label color = "red" />
</mx:Component>
</mx:itemRenderer>
want to make it so I can change the color of the label on the
dynamically by calling some sort of method I have created.. is that
possible? if so coudl you please give a example, thanx!

CS4: Change color of line indicator/outline tool (not line itself)

I couldn't find an answer in any of the resources - possibly because I don't know the right term.
I am talking about the line that is displayed during the period that you draw a line - from the time you click the mouse, until you release it. There's a thin greyscale line indicating the outline of the item you are drawing.
I'm working on ultrasound images, full of greyscale spots. In order to draw lines as precisely as possible, I would prefer that the outline that is displayed while I'm trying to draw my line as correctly as possible, has another color.
I know how to change the color of lines that I have drawn, that are part of the image. What I need is to change the color of the line indicator/helper tool that ONLY shows WHEN I'm drawing a line, and is not really a part of the image.
Hope you can help!

It's a well-known shortcoming that the path that's drawn with the pen is hard to see under some circumstances.
One thing: Its appearance is a little different with OpenGL Drawing disabled vs. enabled. What's your setting (Edit - Preferences - Performance)?
If you're not in need of the OpenGL features, disabling OpenGL Drawing could be helpful in making your paths somewhat more visible. Such a change is not without downsides, but perhaps it could serve as a workaround for you.
-Noel

Can't change the face color in "Line Reveal" Text template

The text template "Line Reveal" will not allow any color in the type face. I changed it to different colors but all I get is shades of gray.
Is this a known bug?

Update.
I wnet back into Motion and noticed a colorize filter that I thought might be conflicting. Turned it off and now it accepts color change.
It's still a bug.
Russ

Plot different colors for thresholds above, in range, and below

I am working on a project that reads data from a com port and graphs the data. For one set of data, I need to check to see if the data is above/below a threshold. I would like the color for the data that is in between the upper and lower thresholds to be a certain color, and the data that is above or below to be to be a different color than the safe range. I have figured out how to get either the above or below to work but not at the same time. Here is an example vi that depicts what I have done so far but is simplified to the extent you do not need to receive any data. Any help on this would be appreciated.
Attachments:
one_line_two_colours.vi ‏53 KB

I add some code to your solution using the same principle (adding NAN-lines)
How many colors you want? Just add thresholds in the array
Still room for improvements
look, there are gaps between the lines, and the -10 should be -INF
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
one_line_n_colours.vi ‏140 KB

Different color in lin in sapscript

Similar Messages

Maybe you are looking for