Different colors Golden Hour VS Sunrise – Why?

The overall color, especially in shadow areas in images taken at sunrise seem cooler/more blue than those taken in the evening, why is that so? Thank you!

The wave lengths are different at sunrise and sunset and generally speaking the atmosphere is cooler in the morning than in the early evening this efcs the density of the atmoshere and its relationship to moisture content als the weather in general is moving away for the the lens in the morning and moving toward it in the early even turning the camera away from the sunset and sunrise of course changes that but realitively so and you wil still get a difference.
There are exceptions with unusual weather conditions.
There are other factors as well inclucing the lens being used but that is usually also relative.
Also the atmospher is warming in the early morning and cooling in the evening but at different rates.
Also because our orbit is eliptical and our rotation is not quite perfect either the angle of the sun is not quite the same.
One of the reason we often get color at these times of the day besides the humitiy is the the light is traveling through more atomospher than it is during the daytime.

Similar Messages

  • Different Colors by "Saving for Web" - why???

    hello,
    i save pics for the web, incl. profile sRBG.
    but the pics look colder - warm colors get lost - in firefox, because ff is not able to use profile (but only with an extension as i know).
    safari is able to show the collors correct.
    bridge color prefs are set to "for web/europe".
    i am choosing "saving for web", and "Incl. ICC-profile"...
    any ideas?
    thanks
    claus

    i have no ie (win) here right now, only mac.
    but here are some pics/examples:
    the original file (incl. sRGB profile, but size reduced in ps3):
    http://www.clausinisland.de/images/IMG_6438kl.jpg
    (ok in safari, but "cold" in firefox 3)
    here we have a jpg by "saving for web...", excl. ICC-profile!:
    http://www.clausinisland.de/images/b2222mm.jpg
    (colder colors, see the skin color, like the original in ff3)
    one more:
    http://www.clausinisland.de/images/bild2.png
    left: jpg with profile in ff3
    right: same pic in preview
    hope this helps a little...
    i wonder, if others have not similar problems?!?!? what i am doing wrong?
    thanks
    claus

  • I have a question about the calendar on the ipad2. I have multiple calendars in different colors. Some of the events are filled in with color. Others are just listed with a colored dot in front of the event. Any ideas why events ar showing up differently?

    I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?

    On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.

  • Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

    Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

    Here's what I've found on the issue:
    Pantone color definitions have changed (coinciding with CS6) — they are now "Pantone+" (I think that's what they're called). The "+" apparently means they're now LAB colors. Lab colors are not properly displayed in Preview (or in Finder previews) — they display as black (as far as I can tell, in all circumstances). I'm sure it's a tad more complicated than that, but that's the gist.
    Now the bad news — nobody seems to know anything about a fix or workaround (unless you convert your PDFs to process — this might be a fix for sending to clients). It causes issues for me in AI files — being able to view them in the finder (with previews) is a HUGE time saver for my workflow... when they're all black, not so much.
    In my chat with a director of product dev at Adobe, they placed the responsibility to fix on Apple (assuming Apple wants to support Pantone color definitions in their OS).

  • Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

    okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

    Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
    Regards.

  • I installed the new update of OS X and now find the iMessages are different colors or shades of gray.  Why?

    Why are iMessages coming thru in different colors from different people?  I haven't assigned color tags to these people.  How did this happen and how can i change it?

    http://www.apple.com/osx/whats-new/

  • Buttons select state different color when burned, why??????

    i making a instructional DVD that requires alot of menu's, besides the fact that i have the re-occuring problem of pixellated button overlays (which i notice everyonr has), to top it of the buttons come out a different color Why? i have no idea.. this is only for the selected and activated states as i am use a overlay file for the buttons. the buttons are in the orignal video file used for menu.
    could it be because of the the colours used in the overlay file are the same as the buttons on the menu. but i have used the advanced feature to set the color for the select/activate state. so that does not make sense. also in the another menu using the same method it works just fine.
    can anyone help. it is important for the colors to be what i have chosen as the dvd has an overall theme and colour style.
    any help will be much appreciated...

    I'm not even really sure how the overlay color option would work, I guess you'd have to use specific colors? In any case, what works well is to use grayscale instead. Make your overlay image in Photoshop, and when you save it, save it as PICT file, 2 bit grayscale. That gives you four grays to use. Take that into DVDSP and in the advanced color settings choose Grayscale, and set the four sliders to the same color, but with transparency valuues of 15, 10, 5, and 0.
    You should now have nice looking, predictable color, overlays.

  • Why don't recently viewed websites show in a different color anymore?

    Yesterday I updated to Firefox 7.0.1, and now my recently viewed websites no longer display in a different color after viewing a website and going back to the original list of websites. I still want to see which ones I have already looked at when researching. Can you tell me how to get this feature back again?

    If you are talking about the color differences between visited and unvisited in the links on your webpages then that that would be affected by any of the following:
    # changing the link colors in your Tools > Options > Content > fonts & colors: "Advanced" for which I have blue for Unvisited and magenta for Unvisited links. I have all three items check-marked "Use system colors:, "Underline links:, and "Allow pages to choose their own colors instead of my selections above".
    # Loss of history data, such as clearing of your browsing history
    #* http://img232.imageshack.us/img232/4928/clearcachew.png
    # Private browsing ("Ctrl+Shift+P") will not mark any links as visited, same would apply to permanent Private Browsing ("Always use private browsing mode") in Tools > Options > Privacy
    #* http://img232.imageshack.us/img232/4928/clearcachew.png
    I left out the link on the following and have added it, but since the above answered the question, I'm changing this last part to a footnote.
    None of which would be directly related to updating Firefox, but at such times the localstore.rdf file in you profile may be affected (corrupted), and changes made to your toolbars and options will not stick.
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Issues with pattern fill in ps 6. Why is it making each tile a different color?

    HELP!!! I've used the Fill>Pattern to tile my seamless patterns tons of times and never had this issue. Suddenly , it started making each tile on the large canvas a different color when I apply Fill>Pattern. At first I thought it was a tip or guide to see the repeat edges , but it shows up in print preview too. What did I do and how do I correct it?

    Is this photoshop 6 or photoshop cs6?
    If it's cs6, check that you aren't using scripted patterns for the pattern fill.
    Also, check the blending mode and opacity in the fill dialog.

  • Why are filenames highlighted in different colors?

    Just upgraded from 10.2 to 10.4 i believe and im noticing filenames ALL OVER the place with different colors to them and i cant figure out any system to it, what is that all about?

    This means that the files have a label assigned to them; Mac OS X 10.2 will not display labels in the Finder but Mac OS 9.x, Mac OS X 10.3 and newer systems will. To turn off a label, control-click the file in the Finder and click the x furthest to the left under Color Label. The files may have color labels because they were set that way when they were placed onto the hard disk, or if the label has been changed after putting them on.
    (10677)

  • WHY DOES MY COMPUTER STOP WORKING AND TURN DIFFERENT COLORS???!!!

    I will start up my computer and it will work for 2-15 minutes and then all of a sudden turn different colors. It will go like blue, green, red, white, and then repeat the colors. This happened to my friends compuuter and she ended up having to get a new one. uh oh...
    Please Help!!!
    Using Mac OS X 10.4.4
    on iBook G4
    THANK YOU!

    Hi, t.o.
    To check for video problems, run the Apple Hardware Test that shipped with your Mac. It will test your display/graphics card as well as other hardware bits. See my "Apple Hardware Test" FAQ for comprehensive advice on using the Apple Hardware Test in troubleshooting, including running the test in Loop Mode.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • HOW CAN I Publish ALL the Original Different Colors in iCal

    I am trying to publish a grouped calendar which includes several differently colored events. I am testing it by subscribing to it from an iCal that has no calendars created at all....and it still will not publish the different colors of the original calendar. All the events appear as one color.
    How can I publish/share my calendar and have ALL the different colors show?
    -I am publishing using a .Mac account.
    THANKS VERY MUCH for any help anyone can give! It will be hugely appreciated.

    I am having this same trouble - I publish
    webcal://ical.mac.com/neyt/neyt.ics
    as a grouped calendar. I tried resetting my sync data fromthe computer that this calendar lives on ( OSX 10.4 because I realized earlier versions have Ical that doesn't even group..)
    Now when I have a subscriber pull down the .ics file, it doesn't show up as grouped, nor do the groups live onthe website version.
    why don't these groups just show up? if I send people the .ics file - it all works just fine...
    I know that some colors might be in use on other computers, I'm sure that other colors will be assigned s individuals need them in their calendars, but the groupings should sync...
    help!!
    flipster for G.Stockman

  • Different colored screens

    Hello, both my friend and I own Iphone 4's. When we look at our screens, they look completely different. His has a very visible yellow tinted screen, and mine is more 'white' looking. I will post an image as soon as I can, but is this normal? Why are the screens such different colors?

    the yellow tint on the screen that you mention could be the adhesive that hasn't been fully dried when it came out of the production line. Normally, as genius would also say is to try to use it for a week, and if it doesn't disappear you can go get a replacement, but they should dry out. So give it a week.

  • Changing the text in each dataGrid row to a different color

    Okay I am going to try and be as clear as possible with this,
    so bare with me.
    What I am trying to do is make it so that when my
    arraycollection objects that I have retrieved from a web service
    are loaded in (by using the "dataProvider" attribute) my dataGrid
    that some sort of code will take place changing the color of each
    line of text (all the objects stored in the array collection are
    string types) and display each rows text in a different color.
    Now after looking into it, it seems the only way to alter the
    color of the text is to use some sort of style or format but it
    seems it only effects text in a "textArea, textField, textInput"
    etc... SOOO I figured why not create a itemRenderer that contains
    one of those and put it into the dataGrid... Which I did and still
    can't figure out a way to make it so you can dynamically alter the
    color based on a set of rbg values stored in a array the same size
    as the rowCount of the datagrid.
    so I am rather stumpped in what to do.. I DON'T want to
    change the background color of each row, so alternatingItemColor is
    out of the question, I just want the text displayed in each row to
    be a different color.... And I want all this color changing to
    happen either before the data is inputted into the dataGrid
    (manipulating the arraycollection some how..) or when its all
    already in there, it all needs to happen in code no user
    interaction.
    I was thinking perhaps maybe I could create a item Renderer
    object that contains the compenent (the textArea in it) and just
    make a array of item Renderer objects and pass those into the
    dataGrid, but I don't think that is possible.
    ANY IDEAS AT ALL!! On how to change the color of the text in
    each row of the datagrid to a different color would be a HUGE,
    HUGE!!! help. Or any info on how to setup a datagrid listener that
    listens for when a object (a row) from the arraycollection is added
    to the datagrid... Perhaps I could use that info some how to my
    advantage.
    email me, if you like I don't care I just need a answer to
    this its driving me crazy! I can change the background row color
    based on a array of rgb values but I can't change the color of the
    item in that row based on array of rgb values, ARG!
    [email protected]
    thanx in advanced.

    <mx:itemRenderer>
    <mx:Component>
    <mx:Label color = "red" />
    </mx:Component>
    </mx:itemRenderer>
    want to make it so I can change the color of the label on the
    dynamically by calling some sort of method I have created.. is that
    possible? if so coudl you please give a example, thanx!

  • Bad versions also for different color and contrast!!!!! Help

    hi,
    the master sharper than version is an issue for me also knowing that is due to antialiasing in monitor scaling (I print 200+ sport shoots in 1 hour at the end of ski races after racers seen them on monitor and give me ok for print - and need a fast but good software).
    But further to this my AP2 on MBPro show the message "Proofing Profile: Apple RGB" at the bottom of the viewer for each image. If I press P key for Quick preview the message disappear but the master images is much more contrasted, darker, and of a different color (and sharper) but much more good than version!!!??? How can i work on a so bad version and also in full screen mode!
    Speed is now good, but if no more good suggestion will arrive Ill'be compelled to swich back immediately to 1.5.6 or try again Adobe LR.

    abetone wrote:
    But further to this my AP2 on MBPro show the message "Proofing Profile: Apple RGB" at the bottom of the viewer for each image. If I press P key for Quick preview the message disappear but the master images is much more contrasted, darker, and of a different color (and sharper) but much more good than version!!!??? How can i work on a so bad version and also in full screen mode!
    You've turned on on-screen proofing. Go to View>Onscreen Proofing to turn it off.
    Ian

Maybe you are looking for