Different column views for different mailboxes?

Is it possible to view different columns for different mailboxes?
Normally, the "Sent" mailbox displays only "To," not "From;" and the other mailboxes display only "From" and not "To." That's fine. But I have another mailbox I've created where I've stored old sent mail, and I only want to see the "To" column, not the "From" column in that mailbox. When I select that mailbox and then choose View-Columns, whatever I choose is applied to the "In" box, and all the other mailboxes (except "Sent" )... is there another way to do this?
G3 B&W Mac OS X (10.3.9)

Column view settings are stored globally for all mailboxes. You cannot change them for one mailbox without also affecting the rest, except Mail allows you to have slightly different From/To and Date Sent/Date Received settings for Sent.

Similar Messages

Specifying different initial views for different users in ALV web dynpro

Hi Friends,
I need to have 2 different initial view for my web dynpro application eg: View1 and View2. There will 2 group of users using the respective Views. However the first group should not be able to see other view(View2) and vice versa.
Please tell me whether it is possible and if yes then how to do it.
Regards,
Saud

Hi,
the ALV component has a public attribute - R_COMPONENT which is of type ref to IF_SALV_WD_COMPONENT_TABLE
you can call GET_PERSONALISATION on this reference to return a reference to the interface IF_SALV_WD_COMP_TABLE_PERS. This in turn has a method - SET_STANDARD_VIEW.
I think that this should allow you to set which ever view you want.
Hope it helps,
Chris

Using different configured views for different user group in crm2007

Hello SAP Expert,
Want to clarify if the BADI (Configuration Access Determination BADI ; BSP_DLC_ACCESS_ENHANCEMENT) is used as design time or Run time. By looking the help of this BADI it says "This Business Add-In (BAdI) is used in the UI Configuration Tool (CRM-FRW-CON) component." Looks like this is at configuration time not at run time.
The actual requirement is that for a set of users which work on a particular department, we want to have some extra information on 2 views and rest of the views they would be using same as entire organization. We are inclined towards using config role rather than zviews. If we were to use zviews then it would not be a difficult one.
We were thinking of a mechanism to show the configured view based on user's Business Role at runtime. e.g. we have 2 roles A and B. Role A user have only 2 views specific to them and all other views they use same as Role B. We do not want to use ZView rather use Role Config Key to distinguish the views. What I was thinking that we should be able to create these 2 views with Config Role A and all views (including these 2) with Config Role B. On Business Role A and Business Role B both, We will assign Config Role "B". but at runtime system should determine if the Business Role is A and Component is CMP1 then use the view V1 with Config Role A not the default view with config role B. (we can maintain that information in a Z table). This is not based on runtime profile but to use configured view at runtime.
Any thoughts/ help really appreciated.
Best regards,

Hi Amithab,
you can use badi CRM_BP_UIU_VIEW_CONFIG of enhancement spot CRM_UIU_BP_ENHANCEMENT for your requirements. Please read the badi documentation because you need also a implementation of badi CRM_BP_UIU_CONFIG_CALLBACK (same spot). SAP considers badi CRM_BP_UIU_VIEW_CONFIG only for use at dynamically loading different configuartions of view details for business partners or contact persons at runtime. But you can use your badi implementation also for other views. You have to redefine method DO_CONFIG_DETERMINATION in your views. And call your badi from there. For this copy&paste the logic of DO_CONFIG_DETERMINATION of bp details to the views you have to load dynamically at runtime.
We have used this approach for access controll and granting special access to views dependent on different employee functions.
Best regards
Michael

Trying to get different column headings for folders in Apple Mail - Help!

Hi there
I really hope someone can help here.
I have a few different email accounts coming into my Apple Mail program. For each account I am using a 'Saved' folder (for the incoming email i have read) and a 'Sent' folder (for the emails I have sent).
In my 'Saved' folder, I want my column headings to be:
a. Who the email is from
b. The subject line
c. The date and time received
In my 'Sent' folder, I want my column headings to be:
a. The address I have sent to
b. The subject line
c. The date and time received
The problem is that when I changed the column headings for one folder, it changes them for all of them. So I can display who my incoming emails are from, but in the sent folder, it only tells me who my sent emails are from....me!! This is no use at all. Is there anyway to apply different column headings to different folders? In Entourage this is easy, but Im at a loss of what to do in mail.
Please help if you can
Many thanks
Dan

as i said, Sent mailbox is special and can have custom columns separate from other mailboxes. ALL other mailboxes have the same columns and you can only customize them simultaneously. if you want to change that leave Apple feedback on the issue
http://www.apple.com/feedback/macosx.html

Design: different AP Groups for different SSIDs?!

Imagine I have different requirements for the AP Groups for different SSIDs
I suppose I can't have different AP Groups for different SSIDs?!
Imagine I have to many Clients to use one single VLAN for one SSID. So I will use AP Groups.
For SSIDâXâ
Let's say I have 5 buildings with 800 Users, so I make a AP Group per Building and tell those APs that they are in that group.
For SSIDâYâ
All though I have this SSID also in all 5 buildings, I only have very view Users, so I could make one single VLAN which makes everything easier.
Am I obligated now to create 5 VLANs for SSIDâYâ too?!
*This is a made up example. In reality I would make different numbers of AP Groups for different SSIDs because I have significantly different number of Clientsâ¦ and traffic characteristics (more or less broadcast).
But it's also about the size of the VLANs, do I make a view large Broadcast Domains (VLANs) or more small ones.
Greetings, Andi

You can have a setup like this if you want:
AP Group 1
SSID X Vlan 10
SSID Y Vlan 21
SSID Z Vlan 31
AP Group 2
SSID X Vlan 10
SSID Y Vlan 22
SSID Z Vlan 31
AP Group 3
SSID X Vlan 10
SSID Y Vlan 23
SSID Z Vlan 32
AP Group 4
SSID X Vlan 10
SSID Y Vlan 24
SSID Z Vlan 32
AP Group 5
SSID X Vlan 10
SSID Y Vlan 25
SSID Z Vlan 33
AP Group 6
SSID X Vlan 10
SSID Y Vlan 26
SSID Z Vlan 33
Here is a link, which you probably already saw.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Sum two different columns from two different tables

Can you select and sum two different columns, from two different tables in the same sql statement?
i.e.
table1
Item----OnHand_Qty
A--------10
A--------15
B--------10
B--------10
C--------20
table2
Item----Trx_Qty
A--------2
A--------4
A--------6
B--------1
B--------1
C--------4
I'm looking for the following results from a query
Item----Sum(Onhand_Qty)---Sum(Trx_Qty)
A--------25

Like this?
SQL> create table table1 (item,onhand_qty)
2 as
3 select 'A', 10 from dual union all
4 select 'A', 15 from dual union all
5 select 'B', 10 from dual union all
6 select 'B', 10 from dual union all
7 select 'C', 20 from dual union all
8 select 'D', 30 from dual
9 /
Tabel is aangemaakt.
SQL> create table table2 (item, trx_qty)
2 as
3 select 'A', 2 from dual union all
4 select 'A', 4 from dual union all
5 select 'A', 6 from dual union all
6 select 'B', 1 from dual union all
7 select 'B', 1 from dual union all
8 select 'C', 4 from dual union all
9 select 'E', 3 from dual
10 /
Tabel is aangemaakt.
SQL> select nvl(t1.item,t2.item) item
2       , t1.sum_onhand_qty
3       , t2.sum_trx_qty
4    from ( select item, sum(onhand_qty) sum_onhand_qty
5             from table1
6            group by item
7         ) t1
8         full outer join
9         ( select item, sum(trx_qty) sum_trx_qty
10             from table2
11            group by item
12         ) t2
13         on (t1.item = t2.item)
14 /
I SUM_ONHAND_QTY SUM_TRX_QTY
A             25          12
B             20           2
C             20           4
E                          3
D             30
5 rijen zijn geselecteerd.Regards,
Rob.

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Different zoom levels for different clips in the same project?

Hi
I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
kind regards
Soren

You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
Using Motion or Scale to Frame Size commands
Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

Creation of Column view for Multiprovider failed

Dear Experts,
I'm facing an issue in TR import.
The TR failed with the below error message.
Creation of column view for XXXXX failed.
XXXXX - Multiprovider
System :BW on HANA (BW 7.4 SP06)
If there's a way to resolve this error, please let me know.
Appreciate your help.
Br, Harish

Hi,
Here's the workaround I have implemented for this issue.
Implemented the note 1955263 and made the below correction to the programSAP_RSADMIN_MAINTAIN.
Object = MPRO_CS_GEN_ERROR_IGNORE
Value = X
After the above customizations are done, TRs are imported without any issues.
For the OSS message I have raised, SAP has asked us to implement the note 2001969 to fix the issue.
Br, Harish

Different Cost Centers for Different Line Items in a single Reservation

Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM

JTree: How to set different cell editor for different tree Nodes.

I have a JTree and I want to set different cell editors for different node depending on some condition. E.g. I want to set ComboBox as editor for leaf node but each leaf node will have its own set of data.
Any help or pointer?
Thanks in advance
Sachin

take there:
http://www.mutualinstrument.com/Easy/FAQ/Tree/tree.html

So how to specify different answer file for different install images in WDS snap-in?

hello
in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
now this one answer file applies to all of them ?
so how to specify different answer file for different install images in WDS snap-in?
thanks in advanced

Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
have a personal unattend-file.
hi Joel
very cool. thanks a lot, that really helped me.
best regards

Different Number range for different objects

HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
Chandra

Hi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek

Different mail ID for different workflows

Hi All,
As per my knowledge if we use mail task in work flow a e-mail will be triggered from mail ID maintained for user wf_batch , is there any way to send mail through different mail iD for different workflows by using mail tasks only, not by using a separate task and using some function modules in that to send mails.
Thanks
Vinod

Hi,
I have done this once. It is not the best I admit as many things must be considered, yet it worked.
In the binding of an activity step, prior to the mail send step, I have included the calling to a custom FM.
In this FM I have dinamically changed the mail address of WF-BATCH (the address was set in an ad-hoc paramenter.
Then right after the mail send step, again in the following binding, I have run the very same FM, with different paramenters of course, to put the address back to where it was.
Corrado

Java.util.logging - different log files for different loggers

I'm having trouble configuring Java logging to use different log files for different loggers.
In log4j, I would do this by configuring multiple loggers each with a different appender. But how can I do this with Java (java.util.logging) logging?
This is the basic idea of what I'd like to do:
com.mycompany.app1.level = FINEST
com.mycompany.app1.<log file> = logfile1.log
com.mycompany.app2.level = ALL
com.mycompany.app2.<log file> = logfile2.log
Any suggestions?

This kind of thing?
import java.io.IOException;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class LogTest {
    private Logger app1;
    private Logger app2;
    public LogTest() {
        // setup loggers
        try {
            // first logger
            app1 = Logger.getLogger("com.mycompany.app1");
            FileHandler filehandler = new FileHandler( "logfile1.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app1.addHandler(filehandler);
            // second logger
            app2 = Logger.getLogger("com.mycompany.app2");
            filehandler = new FileHandler( "logfile2.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app2.addHandler(filehandler);
        } catch(IOException ioex) {
            ioex.printStackTrace();
    private void logStuff() {
        app1.log(Level.SEVERE, "a message for log 1");
        app2.log(Level.SEVERE, "a message for log 2");
        app2.log(Level.WARNING, "another message for log 2");
     * @param args
    public static void main(String[] args) {
        new LogTest().logStuff();
}

Different column views for different mailboxes?

Similar Messages

Maybe you are looking for