Different creation message in MIRO

HI,
Users not getting Proper document creation message when doing MIRO. Two users using MIRO tcode from different roles get different document creation message.
Following Creation message is getting from user id
1. ID 1 : invoice document XXXXXX was posted (accounting document xxxxx)
2.ID 2 : Dcument no xxxxxx posted
How to find the reason for these differet type creation message .
Thanks & Regards,
Renuga.A

Hi,
This is based on the parameter ID for Accounting document no. display while saving.
I thing the ID 1 has activate the Parameter ID.
Check in SU01--> paramers for Accounting doc. no display.
SAM

Similar Messages

Message in miro

Hi , I used the user exit in miro transaction, i have a requirement that in miro when anyone change the vendor and payment term and payment block , a message shows that 'vendor and payment term and payment block cannot be changed' but i want that message will show like
1. 'vendor cannot be changed' in first line
2. 'payment term cannot be changed' in second line
3. 'payment block cannot be changed' in third line

I want to validate the MIRO transaction with user exit LMR1M001. Requirement is that when user changes i.e the payment term , payment block and vendor, need to show three different error message one at atime in Message Box during save/post the invoice verification.
Message 1 : payment term cannot be changed
Message 2 : payment block cannot be changed
Message 3 : vendor cannot be changed.
Thanks & Regards
Prabhat
Edited by: prbhat on Sep 24, 2010 9:01 AM

Is it possible to do message mapping using different namespace message type

Hi all,
Is it possible to do message mapping using different namespaces message types
Example :
i am having message type MT_1 in namespace http://sap.com/abc
and second message type MT_2 in namespace http://partner.com/xyz
so MT_1 can be mapped with MT_2 or not having different namespace.
Thanks

Read through my reply in this thread for Defining Software component dependencies.
Though it explains this for Improted Archives, it also holds true for Message Types to be used in message mappings.
Re: Payload Extraction
Regards
Bhavesh

When i try to use photo creation, message says photoproduct.exe can't be found.

when i try to use photo creation, message says photoproduct.exe can't be found. how can I resolve this issue?

Hi Wayne.
Please contact our customer support team at [email protected]
Be sure to tell them your version of Windows (for example, XP, Vista, or 7). It would also help them to know which version of antivirus software you're running. They can help you figure that out if you don't know, and get you going again.
Thank you for using HP Photo Creations,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Different Exception messages in MRP list & Stock Requirement List

Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
Tom

Hi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek

[svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14330
Revision: 14330
Author:   [email protected]
Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
QA: no
Doc: no
checkin test : pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

[svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14341
Revision: 14341
Author:   [email protected]
Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
    blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

Different error messages from different env while fetching ref cursor

Hi 
I have a package where i need to call one of the procedure.I this 
procedure i am returning a refcursor as out parameter.Before returning refcursor i 
am doing i am checking a condition if it is satisfied then I am saying return or else 
it will proceed and refcursor is assigned for out parameter.So i am speakig about 
the condition where i am exiting from procedure before refcursor parameter is 
assigned .And later i am tring to fetch from that cursor .So i am getting different 
kinds of errors which i described as follows 
 
 
So If execute that procedure from sqlplus uing 
 
 
var m ref cursor 
DECLARE 
Y NUMBER; 
Z NUMBER; 
A NUMBER; 
BEGIN 
A:=campa.dtl_inq(2,100070875,'R',Y,Z,:M); 
END; 
 
Then if say 
Print m 
It gives 
 
ORA-24338: statement handle not executed 
 
And if i execute this using vb application 
 
I am getting following error 
 
ORA-01023: Cursor context not found (Invalid cursor number) 
 
So i am serching the reason for different errors 
 
Regards 
vamsi krishna 

The error depends on exactly what OCI calls the client software makes in accessing this invalid (null) ref cursor variable.
It would seem that SQL*Plus makes different calls than what your code and Visual Basic does - thus the different error messages returned by the two applications.

Can't sync, keep getting different error messages

Had to restore my iPod Classic and now iTunes won't sync. It syncs for a while but then I get an error message. I stop it, start over again and get a different error message. First it says it can't read the folder, then it can't read the file, then it gets an "unknown error (-81)"... what the heck is going on here

1. 10.6.1.7
2. I'm afraid to plug it back in again to check, but it said that I had the latest version installed...does that help?
3. Yes I've tried that, same thing happens.
Last week after numerous attempts I was able to get it to sync about 3400 songs (out of 22000) before it crashed, today I got up to around 4300 and a new Windows error "Delayed Write Failure" in addition to a couple different iTunes errors.

IPod Touch stuck in restore. I keep getting two different error messages.

Forgive me if you've seen this question before and if it's already been answered.
I recently purchased an iPod Touch. It turns on but, you can barely see it. The Apple logo appears and then it goes straight to the restore screen. I updated my iTunes and everything and when I go to restore and update my Touch, I get two different error messages. The first one I get states "Error Message (21)." Now, when I go to unplug the USB cord and plug it back into my Touch, I hold down the Home Key. When I go back into iTunes, it starts the update, it now goes into "Preparing to restore". That's when I get another error message with the numbers "2009".
I went to the Support page and tried the troubleshooting steps but, none have been successful.
Has anyone had this problem? And if so, what was the solution?
Any suggestions/advice would be greatly appreciated. Thanks.
**Also, I never used a jailbreak. The only reason why I mention this is because no matter how high or low I search the net...every one comes up with a "jailbreak" solution. I don't even know how to go about doing that and I'm not gonna even trust myself trying either.
Message was edited by: asher11
Message was edited by: asher11

Make sure the iPod is directly connected to a high-speed USB2 port on the Mac, using the cable that came with it. Also try disconnecting all other USB devices, other than the keyboard and mouse.
Try restoring the iPod touch on another computer.
If the iPod does not restore from another computer, request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
https://selfsolve.apple.com/GetWarranty.do
http://www.apple.com/retail/geniusbar/
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
-Jason

RFCFILE7: Different Error messages on the same error: BP already exists...

Hi,
migrating Business Partners with the RKCFILE7 Direct input program gives 3 different error messages in case that the BP already exists:
1. BP & already exists in role BCA010
2. BP with external number & already exists
3. Data record to be created is alrady available in table BUT000
The strange issue is, that migrating same BPs twice the error log gives for each BP one of these 3 error messages.
However all 3 messages are valid for all BPs (they all exist).
Any idea?
Thanks
Thomas

does not matter anymore

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Hello,
Could you please clarify you have two email addresses [email protected] and [email protected] each with it's own password and you want these delivered to differnt OS X user accounts or seperate folders within Mail?
mrtotes

Printer stopped working. Different error messages for each application.

Hello. Recently I have been unable to print anything from any application and get different error messages from each application. For example:
Word says "Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Canter. You may need to print again or adjust your printer settings."
Entourage says "An error occurred while printing. Not enough memory."
Excel says "Microsoft Excel could not communicate with the printer."
Preview says "Print. Error while printing."
I have tried installing new drivers, repairing the disk and permissions, and deleting and adding the printer from the System Preferences.
I am running OS X 14.4.10 on an iMac G4 1.25 GHz PowerPC with 256 MB DDR SDRAM.
Any ideas? Thanks.

Try downloading the 10.4.10 Combination Updater from Apple and re-update.
If that doesn't help try the free trial of Printer Setup Repair from www.fixamac.net.
If those don't help, reinstall OS X using the Archive & Install option in the installer.

Different away messages for each screen name signed on.

It is possible to use different away message for different screen names all signed on using iChat? I have a home screen name, work screen name, and school screen name, and would like to not have one away message for all three.

No.
4:34 PM Tuesday; February 12, 2008

Different voicemail message for two online numbers...

I have two online numbers. How can I set up a different voicemail message for my second online number? It currently plays the message I set up for my first online number and I see no way to do a message for each number. Do I have to have to set up a whole different Skype account, add an online number to it, just to have a different voicemail message?

I was just asking the same thing...

Different creation message in MIRO

Similar Messages

Maybe you are looking for