Different delays for tooltips
Is it possible to set different delays for two tooltips ? for example, for one component its tooltip will show immediately, but for another component in the same panel its tooltip will show after 2 seconds ?
As a guess I would use mouseEntered() on the components to do (ToolTipManager).setInitialDelay(...) whenever the value changes.
Is there a way to set tooltip specific values for the values you usually set through the ToolTipManager ?
Please do not disclose branches on the external forums. As an Oracle employee you should post questions regarding internal builds to Oracle's internal forums. One the final steps in the wizard allows you to change packaging for each VO and EO.
--Ric
Similar Messages
-
Using time delay for displaying tooltips
Hi guys, hope you are all fine,
I have a little problem, i need to use time delay for displaying a tooltip for a specific amount of time but i don't know what code to use.
Can you please give me a hand? I also try to find out the right way on how i can use tooltips when using a Jpanel and paintComponent. I amcurrently using setXORMode but this is not too efficient.
Thanks guys,
Regards,
John.Ok guys, for any other who need this info, you get time delay by this:
try {
Thread.sleep(time);
} catch (Exception e) {}
// in "time" you put an integer value which represents milliseconds -
How to configure different listener for each database in 11gR2 RAC
Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
ManishHi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish -
Setting variable "Frame Delay" for animation.
I am trying to set frame delay in an animation I am working on. There are a lot of frames and they all have different delays. I am not sure if scripting is the best way but here is what I have so far (using VBA because that is what I am familiar with): I am erroring out at line 23 saying it is a "type mismatch"
Sub Set_Frame_Delay()
Dim appPS As Photoshop.Application
Dim docPS As Photoshop.Document
Dim NewLay As Photoshop.ArtLayer
Dim LaySet As Photoshop.LayerSet
Dim ref1 As Photoshop.ActionReference
Dim actPS
Set appPS = CreateObject("Photoshop.Application")
appPS.Visible = True
Set docPS = appPS.ActiveDocument
Set LaySet = docPS.LayerSets("Text")
Set ref1 = CreateObject("Photoshop.ActionReference")
For Each NewLay In LaySet.ArtLayers
Select Case NewLay.Name
Case "Test1"
actPS = ref1.PutName("Frame Delay", 0.540769)
NewLay.Application.ExecuteAction (actPS)
Case "Test2"
actPS = ref1.PutName("Frame Delay", 1.013942)
NewLay.Application.ExecuteAction (actPS)
End Select
Next NewLay
MsgBox "frame set"
End SubYeah Ive used the script listener before, but was hoping to avoid it because I didn't understand everything that it spits out. But I think I broke it down and I came up with below. I tweeked my original solution to use a text file.
Sub Set_Frame_Delay3()
Dim appPS As Photoshop.Application
Dim ActDescPS1 As Photoshop.ActionDescriptor, ActDescPS2 As Photoshop.ActionDescriptor, ActDescPS3 As Photoshop.ActionDescriptor
Dim ActRefPS1 As Photoshop.ActionReference, ActRefPS2 As Photoshop.ActionReference
Dim dialogMode
Dim idsetd, idnull, idOrdn, idTrgt, idT, idslct
Dim idAniFrClass, idAniFrDelay
Dim sFileName As String
Application.ScreenUpdating = False
Set appPS = New Photoshop.Application
appPS.Visible = True
dialogMode = 3
With appPS
idsetd = .CharIDToTypeID("setd")
idnull = .CharIDToTypeID("null")
idOrdn = .CharIDToTypeID("Ordn")
idTrgt = .CharIDToTypeID("Trgt")
idT = .CharIDToTypeID("T ")
idslct = .CharIDToTypeID("slct")
idAniFrClass = .StringIDToTypeID("animationFrameClass")
idAniFrDelay = .StringIDToTypeID("animationFrameDelay")
End With
sFileName = Application.GetOpenFilename("Textfiles (*.txt),*.txt", , "Open a textfile...")
oIndex = 0
iFileNum = FreeFile()
Open sFileName For Input As iFileNum
Do While Not EOF(iFileNum)
oIndex = oIndex + 1
Line Input #iFileNum, oDelay
Set ActDescPS1 = New Photoshop.ActionDescriptor
Set ActRefPS1 = New Photoshop.ActionReference
ActRefPS1.PutIndex idAniFrClass, oIndex
ActDescPS1.PutReference idnull, ActRefPS1
appPS.ExecuteAction idslct, ActDescPS1, dialogMode
Set ActDescPS2 = New Photoshop.ActionDescriptor
Set ActRefPS2 = New Photoshop.ActionReference
ActRefPS2.PutEnumerated idAniFrClass, idOrdn, idTrgt
ActDescPS2.PutReference idnull, ActRefPS2
Set ActDescPS3 = New Photoshop.ActionDescriptor
ActDescPS3.PutDouble idAniFrDelay, oDelay
ActDescPS2.PutObject idT, idAniFrClass, ActDescPS3
appPS.ExecuteAction idsetd, ActDescPS2, dialogMode
Set ActDescPS1 = Nothing
Set ActRefPS1 = Nothing
Set ActDescPS2 = Nothing
Set ActRefPS2 = Nothing
Set ActDescPS3 = Nothing
Loop
Application.ScreenUpdating = True
Set appPS = Nothing
MsgBox "Frames Delays have been set!"
End Sub
The text file only needs to list the times in seconds in order of frames. In case someone else wants to copy the code. Such as :
0.916303
0.826175
0.660941
1.374455 -
Different screensaver for each display?
I'm pretty sure OS X out of the box doesn't do this, but has anyone found a way to designate a different screensaver for each display, or more specifically, only have the screensaver happen on one display, while the second display goes to sleep?
Thanks!Hi Nari,
I guess that's not possible. From Web Dynpro side, dropdown is only one UI element. So different tooltip cannot be assigned.
However, You can find the which dropdown item is selected and assign the tooltip at runtime accordingly.
In wdDoModifyView method, you can assign the tooltip text.
if(!firstTime){
IWDDropDownByIndex drp = (IWDDropDownByIndex)view.getElement("DropDownByIndex");
drp.setTooltip(wdContext.currentNODEelement().getATTRIBUTE());
Regards,
Anand G -
CBO generating different plans for the same data in similar Environments
Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1 COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 3607425 167760 5/02/2013 22:11
METER_CONFIG_HEADER 3658 80 5/01/2013 0:07
METER_CONFIG_ITEM 32310 496 5/01/2013 0:07
NMI 1899024 33557 18/02/2013 10:55
REGISTER 4830153 101504 18/02/2013 9:57
SDP_LOGICAL_ASSET 1607456 19137 18/02/2013 15:48
SDP_LOGICAL_REGISTER 5110781 78691 18/02/2013 9:56
SERVICE_DELIVERY_POINT 1425890 42468 18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 4133939 198570 16/02/2013 10:02
METER_CONFIG_HEADER 3779 80 16/02/2013 10:55
METER_CONFIG_ITEM 33720 510 16/02/2013 10:55
NMI 1969000 33113 16/02/2013 10:58
REGISTER 5837874 120104 16/02/2013 11:05
SDP_LOGICAL_ASSET 1788152 22325 16/02/2013 11:06
SDP_LOGICAL_REGISTER 6101934 91088 16/02/2013 11:07
SERVICE_DELIVERY_POINT 1447589 43804 16/02/2013 11:11
TEST ITEM 2 COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 9878 67 147 12982 869801 3553095
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 7291 2747 2 639 1755977 3597916
ASSET SYS_C00102592 UNIQUE 2 12488 3733831 1 1 3726639 3733831
METER_CONFIG_HEADER SYS_C0092052 UNIQUE 1 12 3670 1 1 3590 3670
METER_CONFIG_ITEM SYS_C0092074 UNIQUE 1 104 32310 1 1 32132 32310
NMI IDX_NMI_ID NONUNIQUE 2 6298 844853 1 2 1964769 1965029
NMI IDX_NMI_ID_NK NONUNIQUE 2 6701 1923072 1 1 1922831 1923084
NMI IDX_NMI_STATS NONUNIQUE 1 106 4 26 52 211 211
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 12498 795 15 2899 2304831 4711808
REGISTER SYS_C00102653 UNIQUE 2 16942 5065660 1 1 5056855 5065660
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 3667 1607968 1 1 1607689 1607982
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 3811 668727 1 2 1606204 1607982
SDP_LOGICAL_ASSET SYS_C00102665 UNIQUE 2 5116 1529606 1 1 1528136 1529606
SDP_LOGICAL_REGISTER SYS_C00102677 UNIQUE 2 17370 5193638 1 1 5193623 5193638
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 4406 676523 1 2 1423247 1425890
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 7374 676523 1 2 1458238 1461108
SERVICE_DELIVERY_POINT SYS_C00102687 UNIQUE 2 4737 1416207 1 1 1415022 1416207
ENVIRONMENT B
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 8606 121 71 16428 1987833 4162257
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 8432 1780146 1 1 2048170 4162257
ASSET SYS_C00116157 UNIQUE 2 13597 4162263 1 1 4158759 4162263
METER_CONFIG_HEADER SYS_C00116570 UNIQUE 1 12 3779 1 1 3734 3779
METER_CONFIG_ITEM SYS_C00116592 UNIQUE 1 107 33720 1 1 33459 33720
NMI IDX_NMI_ID NONUNIQUE 2 6319 683370 1 2 1970460 1971313
NMI IDX_NMI_ID_NK NONUNIQUE 2 6597 1971293 1 1 1970771 1971313
NMI IDX_NMI_STATS NONUNIQUE 1 98 48 2 4 196 196
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 15615 1273 12 2109 2685924 5886582
REGISTER SYS_C00116748 UNIQUE 2 19533 5886582 1 1 5845565 5886582
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 4111 1795084 1 1 1758441 1795130
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 4003 674249 1 2 1787987 1795130
SDP_LOGICAL_ASSET SYS_C004520 UNIQUE 2 5864 1795130 1 1 1782147 1795130
SDP_LOGICAL_REGISTER SYS_C004539 UNIQUE 2 20413 6152850 1 1 6073059 6152850
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 3227 660649 1 2 1422572 1447803
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 6399 646257 1 2 1346948 1349993
SERVICE_DELIVERY_POINT SYS_C00128706 UNIQUE 2 4643 1447946 1 1 1442796 1447946
TEST ITEM 3 COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 13 | 2067 | | 135K (2)| 00:27:05 |
| 1 | HASH UNIQUE | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 2 | HASH JOIN | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 3 | HASH JOIN | | 6 | 900 | | 135K (2)| 00:27:04 |
|* 4 | HASH JOIN ANTI | | 1 | 137 | | 135K (2)| 00:27:03 |
|* 5 | TABLE ACCESS BY INDEX ROWID| NMI | 1 | 22 | | 5 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | | 95137 (2)| 00:19:02 |
|* 7 | HASH JOIN | | 1 | 109 | | 95132 (2)| 00:19:02 |
|* 8 | TABLE ACCESS FULL | ASSET | 36074 | 1021K| | 38553 (2)| 00:07:43 |
|* 9 | HASH JOIN | | 90361 | 7059K| 4040K| 56578 (2)| 00:11:19 |
|* 10 | HASH JOIN | | 52977 | 3414K| 2248K| 50654 (2)| 00:10:08 |
|* 11 | HASH JOIN | | 39674 | 1782K| | 40101 (2)| 00:08:02 |
|* 12 | TABLE ACCESS FULL | REGISTER | 39439 | 1232K| | 22584 (2)| 00:04:32 |
|* 13 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 675K| 12M| | 9412 (2)| 00:01:53 |
|* 15 | TABLE ACCESS FULL | SDP_LOGICAL_ASSET | 1178K| 15M| | 4262 (2)| 00:00:52 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | | 2 (0)| 00:00:01 |
| 17 | VIEW | | 39674 | 232K| | 40101 (2)| 00:08:02 |
|* 18 | HASH JOIN | | 39674 | 1046K| | 40101 (2)| 00:08:02 |
|* 19 | TABLE ACCESS FULL | REGISTER | 39439 | 500K| | 22584 (2)| 00:04:32 |
|* 20 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 21 | TABLE ACCESS FULL | METER_CONFIG_HEADER | 3658 | 47554 | | 19 (0)| 00:00:01 |
|* 22 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 7590 | 68310 | | 112 (2)| 00:00:02 |
Predicate Information (identified by operation id):
2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
8 - filter("ROW_CURRENT_IND"='Y')
9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 181 | 103K (2)| 00:20:47 |
| 1 | HASH UNIQUE | | 1 | 181 | 103K (2)| 00:20:47 |
|* 2 | HASH JOIN ANTI | | 1 | 181 | 103K (2)| 00:20:47 |
|* 3 | HASH JOIN | | 1 | 176 | 56855 (2)| 00:11:23 |
|* 4 | HASH JOIN | | 1 | 163 | 36577 (2)| 00:07:19 |
|* 5 | TABLE ACCESS BY INDEX ROWID | ASSET | 1 | 44 | 4 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | 9834 (2)| 00:01:59 |
| 7 | NESTED LOOPS | | 1 | 87 | 9830 (2)| 00:01:58 |
| 8 | NESTED LOOPS | | 1 | 74 | 9825 (2)| 00:01:58 |
|* 9 | HASH JOIN | | 1 | 52 | 9820 (2)| 00:01:58 |
|* 10 | TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER | 1 | 14 | 1 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 33 | 116 (2)| 00:00:02 |
|* 12 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 1 | 19 | 115 (2)| 00:00:02 |
|* 13 | INDEX RANGE SCAN | SYS_C00116570 | 1 | | 1 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 723K| 13M| 9699 (2)| 00:01:57 |
|* 15 | TABLE ACCESS BY INDEX ROWID | NMI | 1 | 22 | 5 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | 2 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET | 1 | 13 | 5 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_SLA_SDP_SK | 2 | | 2 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | IDX_A_SAPINTLOGDEV_SK | 2 | | 2 (0)| 00:00:01 |
|* 20 | TABLE ACCESS FULL | REGISTER | 76113 | 2378K| 26743 (2)| 00:05:21 |
|* 21 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
| 22 | VIEW | | 90889 | 443K| 47021 (2)| 00:09:25 |
|* 23 | HASH JOIN | | 90889 | 2307K| 47021 (2)| 00:09:25 |
|* 24 | TABLE ACCESS FULL | REGISTER | 76113 | 966K| 26743 (2)| 00:05:21 |
|* 25 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
Predicate Information (identified by operation id):
2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
"SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
4 - access("ASSET_CD"="EQUIP_CD")
5 - filter("ROW_CURRENT_IND"='Y')
9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PMHi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS NULL COMPLETED
SYSSTATS_INFO DSTART NULL 02-16-2011 15:24
SYSSTATS_INFO DSTOP NULL 02-16-2011 15:24
SYSSTATS_INFO FLAGS 1 NULL
SYSSTATS_MAIN CPUSPEEDNW 1321.20523 NULL
SYSSTATS_MAIN IOSEEKTIM 10 NULL
SYSSTATS_MAIN IOTFRSPEED 4096 NULL
SYSSTATS_MAIN SREADTIM NULL NULL
SYSSTATS_MAIN MREADTIM NULL NULL
SYSSTATS_MAIN CPUSPEED NULL NULL
SYSSTATS_MAIN MBRC NULL NULL
SYSSTATS_MAIN MAXTHR NULL NULL
SYSSTATS_MAIN SLAVETHR NULL NULL -
Hello,
I'm making a simple 6 page site using DW for a class. I want
the navagational buttons to have some flair. I can't code yet, but
am learning. I have soo many tools I don't know which to use.
Flash? PS and Image Ready? Ill. ? The site is my entire grade. The
class is on DW, which I can do, just wanted to have different
appearances for onmouseover, onmousedown and other.
Is Flash the best app. for this?
TIA> Is Flash the best app. for this?
Not in the real world, no. The best app would be a graphics
editor, whether
it be Microsoft Paint, Photoshop Elements, Fireworks,
Photoshop, Xara, etc.
Make the button graphics in your graphics editor, and place
them on the page
in DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Lino 100" <[email protected]> wrote in
message
news:fbh18n$aul$[email protected]..
> Hello,
>
> I'm making a simple 6 page site using DW for a class. I
want the
> navagational
> buttons to have some flair. I can't code yet, but am
learning. I have soo
> many
> tools I don't know which to use. Flash? PS and Image
Ready? Ill. ? The
> site
> is my entire grade. The class is on DW, which I can do,
just wanted to
> have
> different appearances for onmouseover, onmousedown and
other.
>
> Is Flash the best app. for this?
>
> TIA
> -
I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
What I don't understand is this: I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine. Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop. 1) Why did it work before and it's not working now? 2) Is there anything I can do that does not involve reformatting the hard drive?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?
Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha -
Hi,
I have attached my simulation loop.In the model attached i hav eone main pump with constant rpm which drives the 5 smaller pumps and fills the tank at the same time.As soon as the tanks reach their 90% level,the valves of the five pumps close(SP1,SP2,SP3,Sp4,Sp5).After that the recirculating pumps opens for 5 secs of the first tank.As soon as the recirculation finishes,the drain valve(SV1) for tank 1 open and the volume goes to interim storage.This happens for all the remaining tanks.
My simulation works the first time,but when the second time the loop starts,it skips the recirculation pump even though i gave a time delay for 5 secs.Plz help ..I have attached the simulation.
Thanks,
Rami
Attachments:
Spatial Logic_2_Final.vi 223 KBRami,
I suspect that you have a race condition. The widespread use of local variables frequently leads to race conditions. Your subVI (Spatial Logic Sub_2.vi was not included) so I cannot run the VI. You have no way of knowing whether the subVI or the inner case structure will execute first, because there is no data dependency between them.
I think a shift register or a few and some dataflow thinking would allow you to eliminate the inner case structure, the local variables, and, probably, most of your problems.
Some of the SPi are indicators and some are controls. How are they used?
The last case of the inner loop retursn to Case 1. Would case 0 be better?
As for the second time through issue, it may be related to the Elapsed time function Auto Reset. From the help file: "Resets the start time to the value in Present (s) when the Express VI reaches the Time Target (s)." If more than 5 seconds elapses between the first time you use this and the next, it will exit immediately on the subsequent calls.
Lynn -
Creating a Material with different values for fields in Transaction MM01
Hello All,
While creating a material i will be giving a Profit Center in Sales:general/plant view, which i can see in Costing1 View. If i change this in this View it automatically changes in the other View. Is there any way to give different values in the two views or then what is the significance in showing the same field again in two different views.
Thanks,
Shashidhar.Hi,
Its just a way of showing the data in different views for user. It doesn't have any significance.
Regards,
Sudheer. -
Display different level for same hierarchy value in BO 4.0
Hi Expert,
I have one question for Webi for BO 4.0
We have one hierarchy in BW side and we hope to display differet level in same report for different column
For example, column A is for level 6. column B is for level 7.
Do you know how to releaze this in Webi side?
In the 3.X version, we have different dimension for different level.
But now in BO 4, it has been combined into one\
Thanks and best regards
Alex yangHi,
You can still do this in BI 4.0, if you use the old 'legacy' MDX OLAP.unv from Universe Designer tool .
Yes, with the BICS connection, you are getting a native hierarchy, as it would be displayed in an OLAP environment.
Cheers,
H -
How to maintain different prices for same item in different organizations
hi all,
We have noticed that the list price of an item at Item Validation Org level is getting defaulted when creating requisitions. We want to maintain different prices for the item for different organizations, so that the prices will be properly defaulted to requsitions depending on supplier and receiving org.
We found one way of doing this. Using contract purchase agreement and Advanced Pricing price lists. Can anyone please let us know if there is any other way of achieving this??
Also, I have a question regarding Advanced pricing Price Lists. I performed following steps.
1.Set the QP: Licensed for Product profile to Purchasing
2.Create and approve a contract purchase agreement in Oracle Purchasing
3.Define Price Lists and Price List Lines (optional)
4.Define sourcing rules and ASLs to automatically default source information onto requisition lines. Associate Contract to ASL.
5. This will enable Oracle Advanced Pricing integration in the following Oracle Purchasing functionality:
Requisition pricing
Purchase order pricing
But when I create requisitions, the price from price list is not getting defaulted automatically. In requisitions form, if I go to source tab and select source as a Contract Purchase Agreement, then the price from price lists is getting defaulted. Is there any way where the source for the requisition can be automatically defaulted to Contract and the price can be picked from price lists??Can oyu not make it an organization level item and specify the proce there instead of keeping it a master level item?
Regards,
Utsav. -
I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?
You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.
-
I have 1 apple id for iTunes store and a different one for my iCloud acct. How can I watch my photo stream on apple tv and be connected to the iTunes store
Use the same Apple ID for everything.
Maybe you are looking for
-
IPod Touch 4g Bricked after 4.3.4. :(
So my iPod Touch 4G (32Gb) just got bricked. I'm running Windows 7 64-bit, with iTunes 64-bit for windows installed. And before you ask, no, the iPod wasn't jailbroken - never was, never will. It was halfway-charged, connected to the computer. I read
-
Reading XML file and skip certain elements/attributes??
Hi folks! Suppose I have a XML file looking like this: <?xml version="1.0" encoding="ISO-8859-1"?> <!DOCTYPE dvds SYSTEM "DTDtest.dtd"> <dvds> <dvd> <title> Aliens </title> <director> James Cameron </director> <format> 1.85:1 </format> </dvd> <dvd> <
-
Does anyone know how I can burn a multisession using DVD-R?
-
When shall we expect sim free iPhone6 from Apple?
Right now, I am working at USA. I will go back to India on January 2015. I want to buy a unlocked iPhone 6 which should support local carriers at India. I have gone through many forums and stopped by at T-Mobile and Apple stores but didn't get correc
-
Hello again guys, long time no see ,since yesterday as far as I remember Talking about Auto Power Off function , is there anyone that can tell us , it could be used on long terms - many days for example - as long as no one push the shutter or any but