Different delivery type for inbound delivery

Hi,
Somebody knows if it is possible to assign diferent delivery types for inbound delivery from differents document type of PO?
for example, delivery type EL for "NB" PO and delivery type "ZEL" for UB (Stock Transp. Order). 
thanks
RZ

Dear,
Check: Different inbound delivery types from PO conf control keys
Regards,
Syed Hussain.

Similar Messages

  • Goods Movement Type for Inbound Delivery

    Hi all,
    up to know I always thought that when posting a GR to an Inbound Delivery this happenes with MVT 101.
    In my current project MVT 103 is used; but only if serialized materials are concerned.
    Does anybody have an idea where/how I can control this?
    Nor in the ser-no.-profil neither in the confirmation key sth relevant is stipulated....
    Or coulkd it be that an exit is behind? If so, is there a possibility to find it out?
    bR
    Thomas

    Hey,
    many thx; seems to be very "hot".
    They use a special IC (ZSN) for serials.
    Unfortunately your mentioned link does not work ("Page not found"). Could u pls. check it?
    Looked in T184L, clear so far.
    What now is "missing:" Where/how is Movement Type determined?
    Thx again
    Thomas

  • New Condition TAble for Inbound Delivery

    Hello
    i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
    so that the Inbound created for the particular plant alone uses the particular output type.
    Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

    Hi,
    Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
    - Define Condition Table for Inbound Delivery
    - Define Output Types for Inbound Delivery
    - Define Access Sequence for Inbound Delivery
    - Maintain Output Determination Procedure
    - Assign Output Determination Procedures

  • Configuration path for Inbound delivery header text".

    Hi,
    I want separate text type for Inbound delivery, in transaction code VL31N.
    Can any body suggest on "Configuration path for Inbound delivery header text".
    Thanks & Regards
    Sudhansu

    Hi,
    Use Transaction VOTXN.
    *Select the radio button next to Delivery. and select Text types.
    *Go to new entries and create your own text ID after creating text ID go back to the previous screen and select change button.
    Create access sequence.
    select the access sequence you have created and double click ACCESS SEQUENCE FOR TEXT ID folder and Enter sequence number, Text object  and teh text ID you have created.
    Double click text procedure
    Select the text procedure which you are using for teh Delivery document type and double click TEXT ID IN TEXT PROCEDURE Folder.
    Assign the sequenec number TEXT ID and teh ACCESS sequence.
    Afer all teh above configuration steps the you can see the text ID in header text of billing document.
    To retrive teh contents of teh TEXT ID use Fuction module READ_TEXT with TEXT ID, LANG, NAME and TEXT OBJECT as input parameters.
    Note: The contents of the text ID will be in multiple lines of 70 characters each.
    Regards,
    Arun.S

  • How to create a Inbound delivery type for a special  purchase order type

    Hi,
    I try to create a special Inbound delivery type for a special purchase order type (a transfer purchase order).
    In SD module, I can créate a special outbound delivery and precise the sale order type, but I don't manage to do it for a Inbound delivery type.
    Do you know if i can do it without specifiq?
    Regards,
    Roselyne

    Hi Roselyne,
    What you experienced is standard system behavior. Inbound delivery type is uniquely assigned to confirmation control key. You can only specify confirmation control key on item level in PO. The assignment of Delivery type can be seen in the following table:
    T163D
    IBTYP EBTYP LFART  RETDLV
    1        AB                      X
    2        LA        EL           X
    3        GW       EG
    The field T163D-IBTYP is checked in different programms. For example in programm RM06ENAB (TA: ME92F). If you insist to customize the determination of delivery type by PO type, I strongly suggest you discuss with the Application consultants before making the modifications to ensure it won't impact other areas.

  • Different movement types for goods issue via outbound delivery

    Hi gurus,
    How can I use different movement types for goods issue via outbound delivery?
    Thanks&Best Regards,
    Burcu

    To use different schedule lines, we need different item types and different document types. Is that right?
    Is there a user exit in outbound delivery to post goods issue?
    Thanks...

  • Create 2 different delivery types for one sales order

    Hi,
    When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products,  return packages and ordered items) into one sales order.
    However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
    We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
    Thanks,
    Assaf tzur

    Dear Assaf,
    Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
    If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
    I hope this will help you,
    Regard,
    Murali.

  • IDOC for inbound delivery

    Hi Gurus,
    Pls help me to understand this functionality:
    Shipments destined for a Distribution Center will generate ASNu2019s(advance shipping notification) to alert the Distribution Center  to the upcoming receipt.
    There are two variations of the transaction that will initiate the ASN:
    u2022  Receipt of an ASN from a vendor to a Distribution Center  will result in the creation of an Inbound Delivery.  That Inbound Delivery must be sent to WM via  IDOC.
    u2022  Shipments from Distribution Center to DC will create an Outbound Delivery from the u201CClose Loadu201D process in Warehouse M.  Creation of the Outbound Delivery to another DC is the trigger for the IDOC to WM.
    The IDOC to be used could be a variation of the DELVRY03.
    My doubts includes:
    1. can I use one idoc for both the scenarios?
    2. both are outbound idocs or not?
    3. Any suggestions how to do this?
    Thanks..
    SD

    >
    Shibu David wrote:
    > My doubts includes:
    > 1. can I use one idoc for both the scenarios?
    Yes you can use IDOC DELVRY03 for both scenarios
    >
    Shibu David wrote:
    > 2. both are outbound idocs or not?
    No.
    ASN sent to DC will be outbound message.
    ASN received by DC, which creates Inbound delivery is inbound message.
    >
    Shibu David wrote:
    > 3. Any suggestions how to do this?
    As far as I know message type used in SAP for ASN is DESADV.
    For inbound ASN use process code DELS and for outbound use DELV

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Post Goods Receipt for Inbound Delivery using WHSCON IDoc

    Dear All
    Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
    We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
    I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
    We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
    We create a delivery (type NL = replenishment delivery) for this POs
    As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
    At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
    Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
    We dispatched 50 units of a product => QTY:50:12
    The partner received indeed 50 units => QVR:50:66
    Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
    When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
    the goods receipts for the products in the original stock transport order and
    upate the message flow in the delivery
    My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
    In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
    I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
    To make a long story short here are my questions:
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    Does anybody have an example on how to fill the WHSCON IDoc?
    Or is my approach a cul-de-sac ?
    Kind Regards
       Uwe
    PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Packing is not allowed for inbound Delivery

    Hi guys
    I was trying to pack the delivery item in inbound delivery with Pack function in delivery object before posting GR against Inbound Delivery. Though I have maintained customizing settings like this Inbound Delivery category ( ELN) is relavant for packing control. and created a packing material master record with packing material type and packing material group.
    Here i am showing the screen shot with msg when I execute pack function in inbound Delivery object.
    ( Remember SLoc is WM Enabled...If I try to create a TO ....i am able to create against Inbound Delivery but not allowing me to pack)
    Appreciate your inputs on this ..
    ( See attached link)

    Hi,
    I cannot see the attached link and I don't think it it is necessary.
    It would be better if you described your process step-by-step (very shortly and clearly), and if you posted the exact error message with its ID (provided you have error message).
    Thanks,
    Csaba

  • Transfer Order for Inbound delivery with multiple line items...

    Hi All,
    <The flow of my report pgm is >
    PO creation using Transaction - me21n
    My report pick the PO created as per date given in selection screen-
    Creates outbound Deliveries using BAPI_OUTB_DELIVERY_CREATE_STO
    Create Transfer order FM L_TO_CREATE_DN
    Confirm Transfer order FM L_TO_CONFIRM
    GI is done - Inbound delivery is created
    Create Transfer order FM L_TO_CREATE_DN for Inbound delivery
    Confirm Transfer order FM L_TO_CONFIRM
    Goods receipt.
    If PO is having one item - the entire flow is working perfectly.
    if my PO is having multiple items,
    While creating TO for inbound deliveeies - i am facing the error.
    Before calling FM,
    I am assigining these values like
    wa_delit-nlpla  = wa_ltap_vb-vlpla.    "Source Storage Bin To Destination Bin
          wa_delit-nltyp  = wa_ltap_vb-vltyp.    "Source Storage Type To Destination Storage type
          wa_delit-anfme  = wa_ltap_vb-nsolm.    "Actual destination quantity
          wa_delit-letyp  = wa_ltap_vb-letyp.    "Storage Unit Type
          wa_delit-altme  = wa_ltap_vb-meins.    "Unit of measure
          LOOP AT i_lips INTO wa_lips WHERE vbeln = WA_VBFA-IN_DELIV.
            wa_delit-posnr =  wa_lips-posnr.
            APPEND wa_delit TO it_delit.
             ENDLOOP.
    As i am appending i am getting 2 line items in the tabke it_delit.
    Function module :
    CALL FUNCTION 'L_TO_CREATE_DN'
      EXPORTING
       i_lgnum                         = l_lgnum
       i_vbeln                         = wa_vbfa-in_deliv
       i_commit_work                   = 'X'
       i_bname                         = sy-uname
       it_delit                        = it_delit
    IMPORTING
       e_tanum                         = gv_tonum_1
    TABLES
       t_ltap_vb                       = i_ltap_vb_1
      EXCEPTIONS
       foreign_lock                     = 1
       dn_completed                     = 2
       partial_delivery_forbidden       = 3
       xfeld_wrong                      = 4
       ldest_wrong                      = 5
       drukz_wrong                      = 6
       dn_wrong                         = 7
       squit_forbidden                  = 8
       no_to_created                    = 9
       teilk_wrong                      = 10
       update_without_commit            = 11
       no_authority                     = 12
       no_picking_allowed               = 13
       dn_hu_not_choosable              = 14
       input_error                      = 15
       error_message = 16
       OTHERS = 32.
    Here i am getting as input error, i need to create only one TO for multplie items
    If i pass this i a loop - then it will create 2 Transfer order which is WRONG ...so please help me to over come this error.
    Thanks
    Senthil
    Edited by: Senthil Kumar on Dec 7, 2009 3:29 PM

    Hi,
    Please check FM L_TO_CREATE_MULTIPLE.
    Regards,
    Ferry Lianto

  • Mandatory fields for inbound delivery idocs

    hi all
    i want to generate inbound idocs for inbound delivery ASN
    i am using message type DESADV and idoc type /AFS/DELVRY03
    in order to generate inbound idoc what are mandatory values i have to pass to the idocs
    thanks
    Anil

    HI,
    I created inbound idoc for ASN Inbound delivery in test mode we19
    i got idoc with status 62, when i am trying to process the idoc in bd87, its allowing me
    is there any other way to process the idocs , so that status will be 53
    thanks

  • Copy control for inbound delivery

    Hi All,
    I need some help for copy control for inbound delivery. Can any one let me know where is the customization for this?
    Is it t.code VTLA.
    Path in IMG:Logistics Exectuion-->Shipping>copy control--
    >specify copy control for delivery
    But I am not sure if the above is the correct customization path.
    The reason....
    for target document type EL(Inbound delivery) the source document type is DL (order type schduling agreement). Ideally for inbound delivery the source document type should be purchase order. But I can't find the purchase order document types in F4 option.
    All documents which are showing are sales order.
    Awiting your reply.
    Regards,
    Sushanta

    Specify Copy Control for Deliveries
    In this menu option, you define control data for the document flow of deliveries.
    You can specify for a particular delivery type, which document type is to be assigned to copied reference documents, and which item categories are to be copied.
    You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow. This must be done for each copying procedure at header and item level on a detail screen.
    Note
    If you define new sales document types, item categories or schedule line categories by copying existing ones, the SAP system automatically copies all specifications for the document flow. You may want to check the copy controls for newly created sales document types, item categories or schedule line categories.
    Actions
    1. Check the document flow defined in the standard SAP R/3 System.
    2. Define to what extent you have to modify its specifications to meet your requirements.
    3. Define the document flow for deliveries with reference to sales document types.
    Note
    Make sure to maintain copy control for the following areas:
    Sales documents
    Deliveries
    Billing documents
    If you cannot find an entry, check the copy controls in other chapters.
    Complete overview of copy control:
    In the chapter on sales, you can find copy controls for:
    Sales documment by sales document
    Billing document by sales document
    In the chapter on deliveries, you can find copy controls for:
    Sales document by delivery
    In the chapter on billing, you can find copy controls for:
    Sales document by billing document
    Delivery by billing document
    Billing document by billing document

  • Different shipping point for returns delivery

    How do i assign a different shipping point for returns delivery when the material was actually shipped from another shipping point?

    Hi Salag,
    As our expert suggested by using 2 shipping point you can create delivery. Delivery will create based on single shipping point.
    In you scenario if you want to ship the return goods with different shipping point then go with new configuration.
    For Normal sales order OR maintain the shipping condition 01 in the respective sales document type OR
    For  returns order maintain the shipping condition 02 in the respective sales document type RE.
    When comes to shipping point determination shipping point will determine based on
       Order:        SC Loading Group Plant -- Proposed S.P -- Manual S.poimt
        OR    :        01 0001AAAA -
    >     XXXX             --- YYYY
        RE     :        020001AAAA -
    >    YYYY
    If you don't want to go with different SC then manually change the Shipping Point in Returns sales order before creating delivery.
    I hope it reaches to ur requirement. revert in case of any query..
    Regards
    Durga Sana

Maybe you are looking for