Different Document Type For MRP Requirement

Hi All,
Can any one help me for this issue...
MRP run creates PRu2019s for externally procured materials with document type NB, is it possible to have different PR document types for MRP generated Std PRu2019s and Sub contracting PRu2019s without nay enhancement.
Thanks
Praveen
Edited by: Praveen Kumar Shukla on Sep 9, 2009 1:19 PM

Hi
You can set different MRP doc.type: purchase requisitions for standard purchase order / purchase requisition for subcontracting / purchase requisition for subcontracting at MRP group level
Using transaction OPPR u2013 Select plant u2013 Select/create MRP group  under External procurement screen click on Scheduling/doc type.
And make sure that in material master u2013MRP1 view you are maintaining this MRP grp.
with regards,
VB

Similar Messages

Different Document Type for a standard transaction

Dear all,
Iu2019m facing the following problem: I wish to set a different Document Type for a standard transaction.
In the specific, I need a different DT for Reverse Document (T-code FB08) instead of standard SA.
Is that possible?
Thanks in advance
Alberto

Go to OBA7, click on doc type of the original document (which I guess is SA) and then update the field "Reverse Doc Type" to the doc type you want to.

Different Document types for Reciepts and payment-Cash Journal

Hi Gurus,
Please tell me how can we make different document types for reciepts and payments in cash journal and where we need to assign it??
Please revert asap.
Thank You

Hi
While posting the transactions by using FBCJ T.Code u can select the Receipts or Payments or Expenses then the documents will be genereted. FBCJ02 is the T.Code for no.range there u can assign the no.range intervels.
Shammi

Document type for MRP generated Purchase Requisition selection

Hi,
when I run MRP ,for externlal procurement items system is creating Purchase Requisition with Document type NB.How to make system to take different Document type automatically with MRP.
Thanks and Regards
Raghavendra Pai

Dear,
Follow below steps to fullfill your requirements:
1) Go to Tcode OMDT.
2) Click on MRP group
3) In front of your plant maintain your doc.type purchase requisitions for standard purchase ord which you want to generate at the time of MRP --PR generation.
4) Go to Tcode MM02---maintain MRP group same as above parameter in MRP-1 view .
Now run MRP..it will pick the defaulted Document type for PR generation via MRP.
Regards
Utsav

Different document type for Preq's created by the PM-order.

Hi folks,
Currently a PM order auto creates a Preq, after releasal of the PM order. The Preq now has the standard document type NB. Is there any way to use a different Preq document type for the req's created by the PM-order?
Thanks for the suggestions.

Questions is answered.

Allocate a different document type for Initial mayetial Upload document

Dear experts ,
i want to assign a differnt document type for initial goods reciepts that is through MIGO - 561 movement type .
By default the system takes it to be WA . I want to assign some other document type for MIGO-561 .
Where do i make the assignment ?
regards
Anis

I dont think you can do this.
from OSS Note 18614 - MMIM: Transaction/event type for goods movements
The transaction/event type (field: T158-VGART) for goods movements is set in table T158 for the transaction code. This transaction/event type cannot be set via Customizing.
Additional key words
Cause and prerequisites
The transaction/event type has a program control function. If the customer sets the transaction/event type, this may lead to errors. For this reason, the setting should not be possible via Customizing.
Solution
Please do not change the transaction/event type in table T158. You should look for alternatives to reach your aim without making any changes.
Can you explain why you want to do this, what do you want achieve with a new transaction type?

Alternate document type for MRP requisition

Our purchase scenario is that all MRP purchased items must have an approved contract to move to a purchase order. In 95% of the cases, this will be true, but there will be that 5% that, due to expiration of the contract or quantity/value exceeded, a valid, approved contract will not be available. However, the purchase must still proceed.
Our thought is to create an alternate requisition type that the buyer could change the MRP requisition document to. This new document type would then be subject to requisition release strategy.
However, using an MRP generated requisition (creation indicator B), the document does not allow change of the document type. The new document type is a complete copy of the NB document type used in MRP proposal planning, including the number range. The only difference is that the new document type is subject to requisition release.
Changing the document type at the MRP group level won't solve the problem as very few materials will actually require this change. It would be temporary until the existing contract could be extended and approved or a new one created and approved. Also, it seems that the MRP group setting affects only the purchase order and not the requisition.
Is there a way for us to make this process work more smoothly than to have to copy the items from the NB document type to the alternate document type manually?

Assuming you have a material master involved, why not try MRP Group in TCode OMDT. You can assign the group to the material and that group can determine the PR type that is created.
MRP:doc.type purchase requisitions for standard purchase ord
    Identifier allowing a distinction to be made between various kinds of
    purchase requisitions in the SAP system.
    By means of the document type you can, for instance, differentiate
    between a standard purchase requisition and a requisition relating to a
    stock transport order, although both documents belong to the purchasing
    document category "purchase requisition".
Use
    Among other things, the document type controls number assignment and the
    selection of
Regards

Different Document Types for different house banks

Hi Experts,
We want to differentiate the posting in house bank based on the document types. For example, if we use document type KZ, the house bank ABCD should be picked up.
Thanks,
Pratap

Hi,
You cannot assign this relationship.
However in case, you are using separate payment method for separate house bank, then you can assign the document type in the payment method definition.
Otherwise you can develop a validation and substitution to check this relationship of document type and house bank.
However in case you just need that in reporting purpose, please note that line items can already contain the house bank and you can also use that for reporting.
Regards,
Gaurav

Separate Doc.Type for MRP generated PRs

Dear All
We are facing an issue with MRP process where we want to automate the process from MRP run to PO creation.
In source list we will add the existing contracts and make it relevant to MRP so that after MRP run we will get source (vendor defined in the contract) assigned purchase requisitions. After that, we will create a background job for ME59n in order to get the POs automatically after MRP run.
In this process we are facing issue with the auto PO generation through ME59n as funds management (FM) related parameters such as Fund and Fund center need to be enetered manually at the time of PO creation in our system. So in order to avoid this manual entry we want to define FM derivation which automatically populate the fund & fund center in the MRP generated PRs.
Further, we have two options for FM derivation one is valuation class and the second one is Document type. If we define the FM derivation based on the valuation class we cannot only restrict to MRP generated PRs. Second option is separate document type for MRP generated PRs.
Please provide pros and cons regarding the creation of new document type for MRP. Also, please provide your suggestions or any work arounds for the above discussed scenario. Your inputs are highly appreciated.
Thanks in advance.
Prabhas

Hi nagaraj
it makes sense . i will explore and tell you.
what about your source assignment standard program. hope it will assign source of supply if it is a valid unique source of supply else it will assign eprofile to your purcase request. check with technical resource how the satndard program behaves.
i will also explore my side again. check mm forum too on your purchase organisation assignment for your userexists.
one question to you.
when you create a PR for material and go to source of supply .why do we get many fixed vendors like contracts,info record if we have valid fixed vendors as sap ecc standard.but in my PR i may not have Purchase organisation information.
muthu

New document type for shopping cart /PO

Hi Gurus,
I have created a new transaction type ZSHC for Shopping carts in SRM. I have given it a new number range.
while creating a shopping cart , how do i ensure that my shopping carts get created with this transaction type?
is there any attribute which controls this ?
Regards,
Mangesh

Thanks Shrini for your response.
BADI "BBP_CREATE_BE_PO_NEW" does not exist in SRM 4.0. The corresponds BADI in SRM 4.0 is "BBP_CREATE_PO_BACK".
The documentation of this BADI says that it can be used to change all data TRANSFERRED TO THE BACKEND SYSTEM to create a purchase order.
I would want the document type to be selected when the PO is created in SRM and not when SRM transfers the PO to the backend. Because in that case I fear that SRM can have one doucment type and R/3 would end up having different document type for same PO.
I will activate the BADI and keep the thread posted.
Thanks
Venkatesh

Document type for outgoing Excise invoice

Dear Expert,
I would like to maintain different document type for Excise document generated at the time of J1IIN transaction. At present system generating document type SA. So we need to maintain different number range for these documents instead of SA document number.
I have maintained document type ED in Tax on goods movement - Basic Settings - Maintain company code settings, but still system taking document type SA.
Please advice.
Thanks,
Krishna Kumar

Hi,
for outgoing excise invoice document type setting as above mentioned same path
Hi
pls maintain document type below mentioned path
Tax on Goods Movements
               India
                         Basic Settings
                                   Maintain Company Code Settings
whatever marked UTL FI DOC type for excise outgoing excise invoice
in that your maintain company code against ED document type
Thanking you
Regards
Mahesh

Vendor Payment with different document types

Dear Sapguru,
We have a scenario where a particular vendor payable is in two different document types for example, RE and KZ.
When we execute TC F110, the payment proposal is grouping the payments by document type. I.e. it grouped all the documents under type RE and grouped all the documents under type KZ and created two line items in the payment proposal.
Actually, we want to have a single group consisting of all the document types payable to the vendor.
We have checked different SAP notes and also verified out system settings, but the problem still remains.
Can somebody let us know how to group all the open items in a single line item in F110 irrespective of document types.
Thanks in Advance.
Regards.,
Rama

Dear Naravi,
the main factor which affects the grouping of items is the Structure ZHLG1:
ZBUKR
ABSBU
LIFNR
KUNNR
EMPFG
WAERS
ZLSCH
HBKID
HKTID
BVTYP
SRTGB
SRTBP
XINVE
PAYGR
UZAWE
DTWS1
DTWS2
DTWS3
DTWS4
KIDNO
All these fields have to coincide, to have a single payment.
Please check why two documents with different document type are paid into two different payments.
Read the SAP notes 109233 and 164835 and 305414 as well.
I hope this helps.
Mauri

Two different document types in MIRO

Hi Gurus,
Can we have two different FI document types in MIRO for Service PO and Normal PO?
Standard is RE but we want one more.
Can you please suggest something?
Regards,

You can work with your own document types but I do not hink you can have two different document types for Standard and Service PO.
The effect of MIRO is still the same whether its Service PO or Standard PO - GR/IR debit and Vendor credit.
If it is just for reporting, you can always take the PO number from RSEG table.Then drill down to EKKO/EKPO and get all the details.

Two different billing document types for 1 sales document type.

Hi Gurus,
I have a requirement , wherein our client is having counter sale.
He is using one sales doc type , and while creating a order , he is manually adding payment terms.
Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
As per my understanding this is not possible.
Want to know if anyone has some different thought on this.
Thanks in advance
Nilesh.

Dear Nilesh,
There two options you can look in to
One option is
1.You can define different sales document types for cash and credit.
2. You can define two different billing documents.
3.Do the copy control settings for each combination
Cash sales order >Delivery>Cash invoice
Credit sales order >Delivery>Credit invoice
Second option is
1. You can maintain single sales document for both the processes.
2.Define two different billing types then do the copy control settings for both billing types.
But in this option user need to select the billing type manually based on the process while creating billing document.
I hope this will help you,
Regards,
Murali.

Multiple Document Types For Purchase Requisition For Different Order Types

Dear SAP Gurus,
I want to have different document types of Purchase Requisition for different Order types.
For Example:
for Order Type ZT01- Document Type used should be YR01
for Order Type YA01- Document Type used should be ZR01
How could this be achieved?
Regards.

hi
Kindly check the user exit for the same
COZF0001 or COZF0002
regards
thyagarajan

Different Document Type For MRP Requirement

Similar Messages

Maybe you are looking for