Different editions on wmware host and licencing

So, this is our setup:
We plan to buy Enterprise Edition on two blade server.
Also, we don't won't to pay for RAC on Enterprise Edition.
So, is it possible to have 2 virtual machines, with installed
Standard Edition and RAC (which is free in Standard Edition)
if I payed for Enterprise Edition (without RAC licence, 'cause
it cost 23 000 USD with Enterprise Edition)
Hint:In Microsoft, it is legally to buy one edition of SQL Server,
and install lower (and cheaper) edition.
Thanks a lot, guys :)

[email protected] wrote:
We will have about 10 virtual machines; for accomplish this, for
VMware hosts we will buy 2 blade servers. Host one will hosts
5 virtual machines, and host2 will handle the other 5 virtual machines.
All virtual machines will be Oracle database servers.
According to Oracle Licencing, we have to pay all cores for both VM hosts.
Because some virtual machines use table partitioning we have to pay all cores for
Enterprise Edition.
(snip)I am not qualified to answer licensing questions, but I noticed that you mentioned partitioning. The documentation reference that I provided previously shows that Oracle Partitioning is an Extra cost option for Enterprise Edition - like RAC, it is not included in the base Enterprise Edition.
I would assume that you would need to buy the Enterpise Edition plus RAC plus the Partitioning Option for all CPUs in both blade servers because of the requirement of partitioning for one or more of the databases running in the virtual machines. Your best bet is to talk to someone in Oracle Sales.
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Similar Messages

Different sequence for Bridge-hosted and PS-hosted ACR files?

I have four cr2 files in a folder thumbnails displayed in Bridge Content sorted by date created in the following sequence: 1276_1, 1246_2, 1276_3, 1246_4. When I select all four and open in Bridge-hosted ACR they appear in the ACR filmstrip in that sequence. When I open the same selected four from Bridge in Photoshop-hosted ACR they appear in filename sequence: 1246_2, 1246_4, 1276_1, 1276_3. This is in both CS5 and CS6.
Shouldn’t they appear in the Bridge sequence in PS-hosted ACR? Any settings that would influence this?

From Bridge the thumbnails in ACR are displayed in the same order as Bridge, set by the View > Sort menu.
I dinked around in Photoshop, trying to force an open in various sequences by changing the order in the sort box - best I could determine no matter what sequence I selected they always showed in ACR in filename order. Maybe there is a setting somewhere, but I couldn't find it in my brief investigation.
Richard Southworth

Two database with the same sid but different ORACLE_HOME on one host

two database with the same sid but different
ORACLE_HOME on one host,and if configure them with
two differnt lisnter staticaclly,this abosultely work
because in the lisnter.ora we must provice
ORACLE_HOME variable,with this ORACLE_HOME the client
can differentiate which database to connect,but if
use dynamically register feature,how can the client
tell which database to connect?

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

Server host and domain name have changed, which files do I edit?

I just changed my Linux box server name and host name. I am going to edit the:
tnsnames.ora
sqlnet.ora
listener.ora
files to reflect the new host and domain name, are these the only files I need to edit?
Thanks!

OK here is my output when I try 2 different tnsping commands on my remote Linux box from my local PC:
1.)
C:\Documents and Settings\Rick>tnsping db.host.mtdomain.com
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-NOV-2005 07:38:55
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora92\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
2.)
C:\Documents and Settings\Rick>tnsping mydomain.com
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-NOV-2005 07:36:07
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora92\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=mydomain.com))(ADDRESS=(PROTOCOL=TCP)(HOST=mydomain.com)(PORT=1521)))
OK (250 msec)
Here are my sqlnet.ora, listener.ora, and tnsnames.ora
# SQLNET.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = host.mydomain.com
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
# LISTENER.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host.mydomain.com)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/Oracle9i/product/9.2.0)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = db9i)
(ORACLE_HOME = /home/oracle/Oracle9i/product/9.2.0)
(SID_NAME = db9i)
# TNSNAMES.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DB.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host.mydomain.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = db)
EXTPROC_CONNECTION_DATA.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
INST1_HTTP.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
)

I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is edited by host and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to blu

I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is <edited by host> and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to <edited by host> and the email <edited by host> that is my other apple ID and the password work on apple but my yahoo account I forgot my password and security question and it won't verify to my email on to my apple email. so it send the answer to <edited by host> and I can't get it! So Can u do something? Both account r also on my iCloud. I can open both apple account but it won't let me buy nothing on my <edited by host> ! On my <edited by host> that one dose let my buy thing but I had lot of thing I bought on <edited by host> I bought lots of movies music and app. I spend lot of money on this account.

It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

On your iPhone ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Date & Time
Switch: Set Automatically ON
No data is lost due to a reset.

Posts edited by host and removed

Is there some reason my postings are being edited by host and removed from the discussions? Today I posted the following, and it was removed from the discussions. I have since added it back as it and all other posts I write are pertinent and directly applicable to helping users with their problems:
"Three beeps at startup indicates the problems with your system's RAM modules. Have you performed any upgrades on the system, especially RAM upgrades? If so then open the system back up and try re-seating the RAM modules. If one is loose or otherwise not properly seated for some reason then it may result this error. If the problem persists even after reseating the RAM modules, then try replacing them either with originals or with new modules. If at any point you can get the system to load and not make these beeping sounds, then immediately reboot the system into the Apple Hardware Test suite and perform an extended memory test. This will take a while to run, but if there are any errors shown with this test then replace the RAM modules in your system."
Discussion here: https://discussions.apple.com/message/22201917#22201917
I included a link to information on how to use the Apple Hardware Tests, which my be the spurring factor, but the link does not offer me any compensation or benefit. Folks post links to their own sites, programs, and other external resources on a daily basis. The links I provide are directly applicable to the issue at hand (as is all links I post to). I'm not including it here because I'm getting the sense there is an automatic scanning and removal going on and I'd like to figure out what it is, or at least have some feedback about what is going on.
The emails do not have any way to contact or discuss the issue, and instead only mention the post was removed with a link to the terms of use, of which none apply to my situation. This is the only location I know of for having such a discussion, and I am hoping those involved with moderation can provide specific feedback about this issue.
Thanks.

...and the contents of the email I received are just a generic reply, such as the following:
Please read our Apple Support Communities Use Agreement so that you may discover what constitutes an appropriate post to our service. Section two, "Submissions," is most germane.
Your post, copied below, has been removed from Apple Support Communities. This area is intended to address technical issues about Apple products. Posts that do not conform to the Apple Support Communities Use Agreement are inappropriate.
Please see the Apple Support Communities Use Agreement at https://discussions.apple.com/static/apple/tutorial/tou.html for more information on the proper use of Apple Support Communities.
Each Discussion user is required to agree to these terms before gaining posting privileges. You reserve the right to not post on Apple Support Communities should you disagree with these terms.
If you would like to send feedback to Apple about a product, please use the appropriate selection at http://www.apple.com/feedback As part of submitting feedback, please read the Unsolicited Idea Submission Policy linked to the feedback page.
Sometimes you have comments or concerns for which there is no technical response. If you need the kind of help that a troubleshooting expert can't provide, you can call Apple's Customer Relations group.
Best Regards,
Apple Support Communities Staff

Hello, I bought the photografers edition of both lightroom and photoshop. And they didin't gave me my licence to continue using photoshop... how can I find my licence????

Hello, I bought the photografers edition of both lightroom and photoshop. After I paid they didnt gave me the productoct license that i need to continue using both photoshop and lightroom. So, where can I find my product's license?

The Creative Cloud Applications downloads and licensing are controled via the CC Application Manager so you do not have to input your license key manually.

Command to see host and static nat for the same object together

I have researched this but cannot find an answer. ASA running version 8.5.
When you create the config using object NAT you enter the commands as follows
object network <object name>
   host x.x.x.x
   nat (inside,outside) static y.y.y.y
When the config is displayed it separates the host and nat commands in two different sections of the config as follows
object network <object name>
   host x.x.x.x
object network <object name>
   nat (inside,outside) static y.y.y.y
Is there a command that will display it all together (like it was typed in)? Show NAT is something like what I am after but without all of the extra info such as translate_hits, untranslate_hits etc. I need this information but cleaning up the output of a show nat is going to be tough.
Any suggestions?
Thanks.

Sorry, show nat detail is what I meant in the original post in place of show nat.   Show nat detail still has all of the extra info I was trying to avoid. Guess I will be editing a text file.
Thanks for the reply.

Teaming with Windows 2012 DC (Datacenter Edition) Hyper V Host servers

HI
We are preparing 2 Windows 2012 R2 DC edition servers, each of them has 4 NICs, planning to configure both HV host and guest clustering. One NIC will be used for host / HV management and Host cluster traffic, other 3 NICs will be configured in a
single team. These 3 NICs are connected to 2 differenet switches and our intention is to utilize the full bandwidhth. Teaming is configured as Switch Independent / Dynamic load balancing mode. Is this the right configuration? Also each of the VMs
will configured in different VLANs through VLAN IDs.
Thansk in advance
LMS

Hi,
Although we do not recommend this, you can enable domain controllers as a cluster node in Windows Server versions earlier than Windows Server 2012. However, starting with
Windows Server 2012, we no longer support this configuration. We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
At same time we don’t recommend install other role with Hyper-V with on the same server.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Site deosn't look right in third party hosting and can't publish to catalyst in muse

the muse export site looked horribly different than in muse. http://www.shopdaisygirls.com/
and this is what the site is supposed to look like, which it does in muse alone like so...
as well, I can not publish the site even to catalyst from muse as pictured above, it says there was no response from the server. Check you network connection (which is running fine) and try again. I've been trying again, alot. how do I publish correctly to the third party hosting or even to catalyst

It appears that the master css file is missing. Try this and see if it helps. Ensure you are using the latest version of muse. Under the edit menu choose preferences and switch user and sign in with your AdobeID. Re-export the html and upload it to your server.
Let me know if it helps.
J

Web sharing - virtual hosts and CGI

This topic might be a bit advanced for this forum, I'm not sure. But here goes.
I'm trying to set up my laptop to act like a web server so that I can do test development on it. I have two web sites, and have successfully created virtual hosts for each of them.
The part that I'm struggling with now is enabling CGIs, as I want to learn to write CGIs in Perl. I can't seem to find any site that discusses how this is done in Leopard. One said something like "just put the CGIs into /Library/WebServer/CGI-Executables and it'll work", but of course, since I've got virtual hosts defined, it seems that anything addressed to "localhost" defaults to the first virtual host and thus there is no way to refer to a CGI placed in that location. Besides which, I'd like to know how to enable CGIs placed in a folder on each of my virtual sites, so that I could test them in place.
Any ideas?

One said something like "just put the CGIs into /Library/WebServer/CGI-Executables and it'll work", but of course, since I've got virtual hosts defined, it seems that anything addressed to "localhost" defaults to the first virtual host and thus there is no way to refer to a CGI placed in that location.
That is an incorrect assumption.
By default, Apache is configured to recognize any URI that begins with /cgi-bin and serve that request via a CGI script in /Library/WebServer/CGI-Executables
This is true even though each site's DocumentRoot is set somewhere else on the file system (that's by design since it makes it harder for a remote attacker to affect your CGIs)
Since it does not matter which site the request was on, any /cgi-bin request would be served from there, so:
http://www.domain1.com/cgi-bin/some.cgi
http://www.domains2.net/cgi-bin/other.cgi
would both be served from /Library/WebServer/CGI-Executables even though they are for two different virtual hosts.
Now, of course, if you want each site to be separate and have its own set of CGIs (maybe some.cgi for domain1 does something different from some.cgi on domain2) then this approach causes problems. For this you will need to edit each site to have its own cgi-bin directory.
Unfortunately (although I haven't tested it) I think Matt's solution won't work because Apache is going to catch all /cgi-bin/ requests and serve them from /Library/WebServer/CGI-Executables, never getting to the cgi-bin directory within each site's documentroot.
To set site-specific CGI directories you need to add a ScriptAlias command to each site's .conf, such as:
ScriptAlias /cgi-bin/ /path/to/site/cgi-bin/
This tells apache that any request for /cgi-bin/* should be served from /path/to/site/cgi-bin
Ideally the path should be outside of the site's normal document root, but it can be inside if you really want.

[QEMU/KVM] Use KVM switch to switch mouse/kayboard between host and VM

I finally have my QEMU/KVM setup running and working as I want it, except for one thing. I have a KVM switch (a piece of hardware not the hypervisor ) to switch audio and video. It also offers the feature to switch mouse/keyboard between to Computers. Here is the relevant excerpt from my lsusb:
Bus 002 Device 048: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 047: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
Bus 002 Device 046: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 045: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
The device named "Logitech, Inc. Unifying Receiver" is the dongle for my mouse and keyboard. The first problem is that both devices (in both states of the switch they both appear) have the same device id 046d:c52b. This can be solved by telling qemu to identify the device by #bus.#device instead of the id. The problem is that after each switching the device number increases. This makes sense as for the system the switching process is as if the device was unplugged and plugged in in a different usb port. Therefore the device would probably be disconnected from the VM when it was assigned on the VM's startup (is there a way to add usb devices on the fly to a vm without typing an add_usb command in the qemu shell). Do you have any ideas what I could do?
EDIT: Just found about QMP. Would it be possible to save an initial condition (mouse/keyboard is on host) and fetch new devices busses after switching (udev?) and switch the saved sate? If the state is now "m/k should be on the vm" one could send qemu an adequate add command.
EDIT2: I found out that my mainboard's usb is organized using 3 usb controllers (2x2.0, 1x3.0 each with 4 ports). I want to pass one of those PCI controllers to the VM but all I get is a black screen.
EDIT3: I tried the other usb controller and it worked. Well, kind of. I moved the mouse in a circle and made a right click. Than I was not able to use the mouse or the keyboard anymore. Should I consider buying a PCI USB2.0 controller as that might be easier to forward?
Last edited by fkoehler (2015-04-29 23:50:07)

This article has someinteresting information in the comments. You don't have to use a kvm switch neccessarily. I for one prefer a software solution.
Okay, so to make things clear: I do not switch keyboard/mouse. I keep them shared between both OS, using Synergy. The host OS runs a web server, and the guest OS runs a client – they exchange mouse position information, so that at any time only one of them receives ‘clicks’. This is great for both multi- and single-monitor setups.
Another story is that I have two video outputs connected to a single monitor, and I would like to switch between them without using the buttons on the monitor itself. For this, I use the I2C that is embedded within HDMI or DP.
Almost all monitors support DDC, but there are scarce apps that can make us of it. There is DDCcontrol for linux, but it is completely outdated, and failed to work with my particular monitor. So I ended up getting to know the VESA DDC standard, reading the source of that tool and several similar ones, and created a simple C program (source) that works in case of my setup. Most likely it will not work elsewhere, but it should give you a nice starting point for communicating with the monitor. The fragile spots are line 41 – you may need to change the i2c bus number the the one correct for your system, and you may need to prepare other data to send to the monitor (68 and 71) if you want to switch between other outputs than I do. Refer to the standard in order to prepare them.
As for how to change his source code to help you, I am not of much help right now as I do not know the DDC protocol. Hope that helps.
Last edited by noctlos (2015-04-30 16:01:45)

Sending email to 10,000 addresses without knowing Host and Protocols!!

Context:
I am building an "eMail Marketing Campaign" application which takes a list of email addresses (unlimited) and sends an eMail to all of them.
My servlet creates an instance of "MyMailHandler.java/class" and passes a list of addresses.
Problem:
If I want to send email to different user, do I need to know about everyOne's HOST and PROTOCOL. My application recieves list of addresses from a remote server of a data-selling-company so they don't have that info.
Following is the code (hardCode!) of MyMailHandler.
properties.put("mail.smtp.host", "MAIL.DMCDATABASE.COM");
properties.put("mail.transport.protocol", "IMAP");
Question:
How do I send emails to receivers without knowing everyOne's host and Protocol?????? (new to JavaMail)

No, you only need to know the name of your own mail host. It will send the e-mails to those 10,000 addresses for you. And the protocol for sending mail is SMTP, that's all you need to know to send mail. IMAP and POP are protocols for storing received mail messages and so are not relevant to your task.

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

Different editions on wmware host and licencing

Similar Messages

Maybe you are looking for