Different Effective Date in One BOM with only ONE Change Number

Hi gurus
here is my complete question?
Is it possible to realize this function that Different Effective Date in One BOM for different BOM items with only ONE Change Number?
Thanks for your information/help in advance.

Dear Zhao,
Using One change number it's not possible to define a different valid from date for the BOM changes of a single material BOM.
In case if the same change number is used for making different material's BOM component,then a different valid from date for
each BOM can be defined,but at any given point not for each component/item level of the same BOM.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • How can I share different sources to multiple Apple TV with only one controller (Mac Mini)

    Here's the setup
    3 TV's in 3 different rooms each connected to 3 different Apple TV.
    It is self-explanatory has how to share the SAME source to 2 or 3 of the Apple TV.
    What I want to know: Can we manage Apple TV's in a way that I can share 3 DIFFERENTS source with ONE controller, let's say a Mac Mini or PC using AirParrot.
    Im open to third-party apps as this is my only complaint for using an easy and affordable setup.
    Regards.

    I have a WLAN at home conneting Mac mini (late 2009), PS3 slim and xbox 360 in the living room and I would love to share whats on the Mac mini with AT3 in the guest room upstairs, physically it wont be possible to control both screens at the same times. The files I have are on external HD connected via firewire + USB to Mac mini and they are a mix of avi, mp4, mpeg etc. I'm talking about 3 TB of movies and series (its still legal here in Dubai to download ;-)). starting to convert such amount of files its not an option. AirParrot is a good option when I have media stored on my MacBook pro and would like to play it no AT3 but I used Beamer it works great for such function.
    any ideas folks ?

  • More than one sender with only one comunication channel

    Hi experts.
    I need to know that it is possible to make a one File FTP sender comunication channel with more than one host.
    If that is not possible, how could get that functionality?
    Thanks!
    Regards.

    Hi Alvaro,
    It is not a bad idea to do a report to search in the two locations, make a job for polling and later the report call  via http or SOAP to PI itself (if you need to do any map or you need file content conversion) or not to use in PI scenario (neither http or SOAP call) if you only need to move files. I only see the next disadventages:
    1. It is not a standard solution. This could be problematic in a SP uppgrade or PI version change.
    2. If one day your client thinks to migrate to the PI java-only version, you would need to do again this scenario.
    3. If you haven't any scenario in PI or a good documentation system, this interface can be forgotten for you or by future PI technician.
    4. You lose the powerful of the monitoring tools.
    Hope this helps.
    Regards.

  • Multiple events per date with only one photo each - Unwanted

    I have the eyefi wireless sd card in my camera and it is setup to transmit my photos into iphoto automatically, which it does. However, the problem arises in that iphoto creates multiple events for the same date each containing only one photo. I would prefer that iphoto create individual events per date and have the multiples of that date's photos within. I thought I had the settings configured to do so as I have preferences set for autosplit events one per day but I still see events such as - July 3, 2008 - July 3, 2008 - July 3, 2008 - each with only one photo inside.
    I am wondering if it is something in iphoto's settings or the way in which eyefi transmits the photos into iphoto.
    Any thoughts?

    I do not have a WiFi connection to my camera so can not test but am just guessing
    I can think of two possibilities
    - 1 - if you are taking the photos with the WiFi connected then each time you snap a photo it may be being sent which would be looked at as a new import and therefore create a new event - to stop this I believe you would have to not have a full time WiFi connection to your camera or somehow set the camera to send batched - not each one - iPhoto will take each batch into and follow the rules for making events for that batch even if you camera is sending many batches of One photo
    - 2 - You have the preference for making batches set to one every two hours and there is a long time between photos - I'm guessing that #1 is more likely
    LN

  • How can I play different videos with only one MediaPlayer?

    I want to play two videos with only one MediaPlayer:
    private static MediaPlayerBuilder mpB;
    private static Media mLogo;
    private static Media mSaludo;
    private static MediaPlayer mpLogo;
    private static MediaView mvLogo;
    private static Group gLogo;
    public void start(final Stage stage) {
    mLogo = MediaBuilder.create().source(myGetResource(VIDEOLOGO_PATH)).build();
    mSaludo = MediaBuilder.create().source(myGetResource(VIDEOSALUDO_PATH)).build();
    mpB = MediaPlayerBuilder.create();
    mpLogo = mpB.media(mLogo).build();
    mvLogo = MediaViewBuilder.create().mediaPlayer(mpLogo).build();
    gLogo.getChildren().add(mvLogo);
    sActual = new Scene(gPozos, WIDTH, HEIGHT, Color.BLACK);
    stage.setScene(sActual);
    stage.show();When I want to play mLogo:
    sActual.setRoot(gLogo);
    mpLogo.play();Then, when I want to play mSaludo I do this:
    mpLogo = mpB.media(mSaludo).build();
    sActual.setRoot(gLogo);
    mpLogo.play();or this:
    mpB.media(mSaludo).applyTo(mpLogo);
    sActual.setRoot(gLogo);
    mpLogo.play();or this:
    mpB.media(mSaludo);
    sActual.setRoot(gLogo);
    mpLogo.play();But is impossible to change the Media. It doesn't work. Sometimes I play mLogo video and sometimes (depends on the code) the video mLogo doesn't start and I see an image of the first keyframe and nothing else. I have no exceptions, no errors, nothing.
    I want to play mLogo and then mSaludo. How can I do this?
    Thanks
    Noelia

    Ok, I understand, if I have 100 videos I have to build 100 MediaPlayers but only one MediaView.
    Here I post my code with only two videos, I included all the asynchronous errors.
    package pruebafx;
    import java.util.logging.FileHandler;
    import java.util.logging.Level;
    import java.util.logging.Logger;
    import javafx.application.Application;
    import javafx.event.EventHandler;
    import javafx.scene.Group;
    import javafx.scene.Scene;
    import javafx.scene.media.Media;
    import javafx.scene.media.MediaErrorEvent;
    import javafx.scene.media.MediaPlayer;
    import javafx.scene.media.MediaView;
    import javafx.stage.Stage;
    * @author Solange
    public class PruebaFX extends Application {
        private static final Logger logger = Logger.getLogger("pruebafx.pruebafx");
        private static final String MEDIA_PATH = "/images/";
        private static final String VIDEOLOGO_PATH = MEDIA_PATH + "logo.flv";
        private static final String VIDEOSALUDO_PATH = MEDIA_PATH + "saludo.flv";
        private static Group root;
        private static Scene scene;
        private static MediaPlayer mpLogo;
        private static MediaPlayer mpSaludo;
        private static Media mLogo;
        private static Media mSaludo;
        private static MediaView mediaView;
         * @param args the command line arguments
        public static void main(String[] args) {
            Application.launch(args);
        @Override
        public void start(Stage primaryStage) {
            try {
                FileHandler fh = new FileHandler("DisplayManagerlog-%u-%g.txt", 100000, 100, true);
                // Send logger output to our FileHandler.
                logger.addHandler(fh);
                // Request that every detail gets logged.
                logger.setLevel(Level.ALL);
                // Log a simple INFO message.
                logger.info("Starting PruebaFX");
            } catch (Exception e) {
                System.out.println(e.getMessage());
            primaryStage.setTitle("Change Videos");
            root = new Group();
            mLogo = new Media(myGetResource(VIDEOLOGO_PATH));
            mSaludo = new Media(myGetResource(VIDEOSALUDO_PATH));
            mpLogo = new MediaPlayer(mLogo);
            mpSaludo = new MediaPlayer(mSaludo);
            mediaView = new MediaView(mpLogo);
            mpLogo.setOnEndOfMedia(new Runnable() {
                public void run() {
                    mpLogo.stop();
                    mediaView.setMediaPlayer(mpSaludo);
                    mpSaludo.play();
            mpSaludo.setOnEndOfMedia(new Runnable() {
                public void run() {
                    mpSaludo.stop();
                    mediaView.setMediaPlayer(mpLogo);
                    mpLogo.play();
            mLogo.setOnError(new Runnable() {
                public void run() {
                    logger.severe("Error en Media mLogo");
            mSaludo.setOnError(new Runnable() {
                public void run() {
                    logger.severe("Error en Media mSaludo");
            mpLogo.setOnError(new Runnable() {
                public void run() {
                    logger.severe("Error en MediaPlayer mpLogo");
            mpSaludo.setOnError(new Runnable() {
                public void run() {
                    logger.severe("Error en MediaPlayer mpSaludo");
            mediaView.setOnError(new EventHandler<MediaErrorEvent>() {
                public void handle(MediaErrorEvent t) {
                    logger.severe("Error en MediaView mediaView");
                    logger.severe(t.getMediaError().getMessage());
            root.getChildren().addAll(mediaView);
            scene = new Scene(root, 300, 250);
            primaryStage.setScene(scene);
            primaryStage.show();
            mpLogo.play();
        public String myGetResource(String path) {
            return (this.getClass().getResource(path).toString());
    }My video saludo.flv hangs up.
    Here is the content of the log file:
    <?xml version="1.0" encoding="windows-1252" standalone="no"?>
    <!DOCTYPE log SYSTEM "logger.dtd">
    <log>
    <record>
    <date>2011-12-12T12:03:53</date>
    <millis>1323702233578</millis>
    <sequence>0</sequence>
    <logger>pruebafx.pruebafx</logger>
    <level>INFO</level>
    <class>pruebafx.PruebaFX</class>
    <method>start</method>
    <thread>12</thread>
    *<message>Starting PruebaFX</message>*
    </record>
    <record>
    <date>2011-12-12T12:04:06</date>
    <millis>1323702246109</millis>
    <sequence>1</sequence>
    <logger>pruebafx.pruebafx</logger>
    <level>SEVERE</level>
    <class>pruebafx.PruebaFX$6</class>
    <method>run</method>
    <thread>12</thread>
    *<message>Error en MediaPlayer mpSaludo</message>*
    </record>
    <record>
    <date>2011-12-12T12:04:06</date>
    <millis>1323702246109</millis>
    <sequence>2</sequence>
    <logger>pruebafx.pruebafx</logger>
    <level>SEVERE</level>
    <class>pruebafx.PruebaFX$4</class>
    <method>run</method>
    <thread>12</thread>
    *<message>Error en Media mSaludo</message>*
    </record>
    </log>
    Do you know when will be available the 2.0.2 version???
    I have to finish my application!!!
    Thanks.
    Noelia

  • How use two templantes with only one job ?

    I have two templantes and want use with only one job.I use with input one xml data file !!
    Is this possible?
    Please Help!!
    Thanks,
    Bruno.

    I probably missed this one earlier or felt that since it referenced an XML data file that I couldn't provide a definitive answer. I'm still not sure I can because we don't use XML for our data files, but use the "field nominated format".<br /><br />An expansion on Tammy's information:<br /><br />1. use a multi-step job with each <br />b task<br />calling a different MDF.<br />With this correction, it assumes that you either have access to set up the tasks/jobs yourself or can convince your Central administrator to do so. What happens is that TASKA is set up to reference FORMA and TASKB is set up to reference FORMB. Then a job is set up that causes both TASKA & TASKB to be ran. This will likely result in two different print files being sent to the printer. That may or may not be desirable, depending on whether your printer is set up to do something special between each print file (insert separator page, offset, whatever). Personally, I don't recommend this as it can quickly cause an unnecessary proliferation of tasks and jobs (we print 100's of differing form combinations with a single job definition).<br /><br />2. I can't really address this as I didn't even know that a single form could cause another to be called. I would expect that unless the "base" form (say it is FORMA) is to always print with the secondary form (FORMB) it is restrictive and has the potential to cause a proliferation of FORMA files for the various combinations that are to be printed. Maybe it is possible to have logic to check the value of a data field to control what forms get called.<br /><br />3. If you pass the XML file through a translation step and then through the transformation agent (maybe it can be done in a single step) this should work. It does add another step to the job as well as requiring learning to use the transformation agent. Depending on the combination of forms to be printed, you might need a different translation definition for each one, or at the very least have a data field that you can check the value of to determine what ^form commands to put in the output file.<br /><br />4. My recommendation is based on assuming an XML data file has the same capabilities as a field nominated file. Within a field nominated file are various print agent commands, including references to data as well as which forms are to be printed (and a whole bunch of other commands). An XML file should have the same features - I just can't say what they might look like. If your current data file has no "form" reference but depends on the job/task definition you might have to stick with option 1. If it has a "form" reference, then you just need to insert additional references for additional forms. Then it is up to the source of your data (or a transformation agent step) to specify which forms are to be printed. For example, in field nominated format, the file might look like:<br /><br />^job XYZ additional parameters<br />^form FORMA.MDF<br />^field FIELD1<br />data<br />^field FIELD2<br />data<br />^form FORMB.MDF<br />^field FIELD1<br />data<br />^field FIELD3<br />data<br /><br />or it might look like the way our files look:<br /><br />^job XYZ additional parameters<br />^global FIELD1<br />data<br />^global FIELD2<br />data<br />^global FIELD3<br />data<br />^form FORMA.MDF<br />^form FORMB.MDF<br /><br />As you can see in the first example, there is a reference to the form followed by all fields that go on it followed by another form reference with the fields that go on it. This particular method, using all "^field" commands for defining the data requires that data duplicated between the forms be duplicated. (Or, the use of some ^global commands like the following.)<br /><br />In the second example, all data is defined first using the "^global" command followed by all of the form references. This allows for the data to be defined only once. If there is something unique regarding a particular form the field can be ^global at the beginning or it can be ^field <br />b after<br />the ^form reference (similar to the first example).<br /><br />As previously mentioned, the XML file should have the same capability but in XML notation, something like the following (forgive me as it has been years since I took the XML class and don't use it in my daily work so the actual format could be wrong, not to mention the actual labels):<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br />  <form name=FORMA.MDF><br />    <field name=FIELD1, value=xxxxxxxxxxx></field><br />    <field name=FIELD2, value="xxxxxxxxxxxxx"></field><br />  </form><br />  <form name=FORMA.MDF><br />  etcetera<br /></job><br /><br />or maybe:<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br />  <global name=FIELD1,value=xxxxxxxxxxxx></global><br />  <global name=FIELD2,value="xxxxxxxxxxxxx"></global><br />  etcetera<br />  <form name=FORMA.MDF></form><br />  <form name=FORMB.MDF></form><br /></job><br /><br />or even (but I doubt it):<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br />  <globals><br />    name=FIELD1,value=xxxxxxxxxxxxxxxx,<br />    name=FIELD2,value="xxxxxxxxxxxxxxx"<br />  </globals><br />  <forms><br />    name=FORMA.MDF,<br />    name=FORMB.MDF<br />  </forms><br /></job>

  • How to connect many devices with only one FW800 port in iMac?

    Hi,
    I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
    My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
    (1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
    (2) Connect the d2 Quadras to one port of the FW800 hub
    (3) Get a FW 800 to FW 400 cable
    (4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
    Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
    Will

    In addition to your listed considerations, you should consider the following.
    Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
    There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
    So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
    Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

  • I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library  Do you want to erace this Ipod and synce with this itunes library?  An Ipod can only be synced with only one itunes library at a time.  Erasing and

    The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library?  An ipod can be synced with only one itunes library at a time.  Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
    I don't know what to do?  I should save my library before I replace the contents, but I don't know how to do that! HELP!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I want to make a video clip using two still pictures, placing side by side.  I am able to make with only one at a time.

    I want to make a video clip using two still pictures, placing side by side.  I am able to make with only one at a time.  Also, I am able to move the picture using Transform.  But unsuccessfull in making with two stills in same clip.  Thank you for reply.

    If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
    Russ

  • How to use data in a ResultSet when only one record in set?

    Hi.
    Using a prepared statement which invokes a SELECT * from <table> where <primary key> = <unique value>.
    This is executed and the results sent to a resultSet.
    The only problem is that only one entry is in the resultSet. I want to parse the results and invoke a new class based on the results.
    So I have:
    statement = conn.prepareStatement ("SELECT First_Name, Last_Name, Street, Unit, City, Province, Postal_Code" +
    " from Customer where CustomerID = ?");
    statement.setInt (1, custID);
    rset = statement.executeQuery();
    rset.next();
    cust = new Customer (custID,
    rset.getString ("First_Name"),
    rset.getString ("Last_Name"),
    rset.getString ("Street"),
    rset.getString ("Unit"),
    rset.getString ("City"),
    rset.getString ("Province"),
    rset.getString ("Postal_Code"));
    statement.close();
    rset is a ResultSet. And I'm pretty sure that something like this is WRONG. But one thing I want to know, is there ANY way to properly parse a resultset with only one record?
    Thanks.

    I think I should clarify what I was doing: I'm trying to insert a record into a table, and with the ID that I obtain, use it to retrieve the data.
    I did put a commit in there, but someone suggested that the commit won't work in this scenario.
    Here is bits of the code that I'm using. By the time insertCustomer is invoked, custID is already populated. The insert works because I checked the table afterwards using a sql query and all my entries posted are there.
        private void insertCustomer (HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException
            Connection conn = null;
            PreparedStatement statement = null;
            try {
                conn = DriverManager.getConnection (url, userid, password);
                statement = conn.prepareStatement ("INSERT INTO CUSTOMER (CustomerID, First_Name, Last_Name," +
                        " Street, Unit, City, Province, Postal_Code) values (?, ?, ?, ?, ?, ?, ?, ?)");
                statement.setInt (1, custID);
                statement.setString (2, firstname);
                statement.setString (3, lastname);
                statement.setString (4, address);
                statement.setString (5, unit);
                statement.setString (6, city);
                statement.setString (7, province);
                statement.setString (8, postalcode);
                statement.executeUpdate();
                conn.commit();          
                statement.close();
            catch (SQLException e)
                throw new ServletException (e);
            finally
                try
                    if(statement != null)
                        statement.close();
                    if(conn != null)
                        conn.close();
                catch (SQLException e)
                    throw new ServletException(e);
        private String getCustRec (HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException
            Connection conn = null;
            PreparedStatement statement = null;
            ResultSet rset = null;
            CustomerJDBC cust = null;
            try
                conn = DriverManager.getConnection (url, userid, password);
                statement = conn.prepareStatement ("SELECT First_Name, Last_Name, Street, Unit, City, Province, Postal_Code" +
                        " from Customer where CustomerID = ?");
                statement.setInt (1, custID);
                rset = statement.executeQuery();
                rset.next();
                cust = new CustomerJDBC (custID,
                        rset.getString ("First_Name"),
                        rset.getString ("Last_Name"),
                        rset.getString ("Street"),
                        rset.getString ("Unit"),
                        rset.getString ("City"),
                        rset.getString ("Province"),
                        rset.getString ("Postal_Code"));
                statement.close();
            catch (SQLException e)
                throw new ServletException (e);
            finally
                try
                    if(statement != null)
                        statement.close();
                    if(conn != null)
                        conn.close();
                catch (SQLException e)
                    throw new ServletException(e);
            return "/CustomerCreatedJDBC.jsp";
        }The Constructor method of the class CustomerJDBC appears something like this:
    public CustomerJDBC (int id, String fname, String lname, String addr, String unit, String city, String prov, String pcode)
            this.custID = id;
            this.firstname = fname;
            this.lastname = lname;
            this.address = addr;
            this.unit = unit;
            this.city = city;
            this.province = prov;
            this.postalcode = pcode;     
        }Thanks for your help.
    Edited by: tahna_los on Nov 16, 2008 11:49 PM

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Hello Jesslb23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Best of luck,
    Mario

  • Nodes with Only One Lower-Level Node = Hide

    Hi everyone
    Have anyone present this situation:
    Iu2019ve a quey to report inventory aging. It has two hierarchies to show data. In Rows I have Major Markets and in Columns a date hierarchy to show aging Ex: from 0 to 8 months, 9+ and 13+. Of course here I have also value and volume.
    Query reports all values for all major markets fine. When I filter one major market, letu2019s say France also brings detailed figures but when I add any drill down in rows all values goes to cero (0).
    Te estrange is that if you swap drill down order with major markets or drill down by columns with the same characteristic figures come out again as usual.
    I know this sounds like a SAP note but I have not been able to find it either.
    Thanks a lot for your help, and of course points will be assignedu2026..
    Ps. Important, this happen when  option u201CNodes with Only One Lower-Level Node = Hideu201D (this is selected on purpose because there are some repeated nodes in major market hierarchy Ex. France u2013 France and if there is just one value under first node then means that only display of last one is necessary to avoid repeated values).

    Solution we found is to remove flag "Do not display leaves for inner-nodes in the query", directly on the hierarchy.
    Thanks

  • SQL Server 2012 Undetected Deadlock in a table with only one row

      We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.
      This is our main database, so most of the applications access it.
      The day after the migration, when users started to run tasks, the database access started to experiment a total failure.
      That is, all processes in the SQL 2k12 database were in lock with each other. This is a commom case of deadlock, but the Database Engine was unable to detect it.
      After some research, we found that the applications were trying to access a very simple table with only one row. This table has a number that is restarted every day and is used to number all the transactions made against the system.   So, client
    applications start a new transaction, get the current number, increment it by one and commit the transaction.
      The only solution we found was to kill all user processes in SQL Server every time this situation occurs (no more than 5 minutes when all clients are accessing the database).
      No client application was changed in this migration and this process was working very well for the last 10 years.
      The problem is that SQL 2k12 is unable to handle this situation compared to SQL 2k.
      It seems to occurs with other tables too, but as this is an "entry table" the problem occurs with it first.
      I have searched internet and some suggest some workarounds like using table hints to completely lock the table at the begining of the transaction, but it can't be used to other tables.
      Does anyone have heard this to be a problem with SQL 2k12? Is there any fixes to make SQL 2k12 as good as SQL 2k?

    First off re: "Unfortunatelly, this can't be used in production environment as exclusive table lock would serialize the accesses to tables and there will be other tables that will suffer with this problem."
    This is incorrect. 
    Using a table to generate sequence numbers like this is a bad idea exactly because the access must be serialized.  Since you can't switch to a SEQUENCE object, which is the correct solution, the _entire goal_ of this exercise to find a way to properly
    serialize access to this table.  Using exclusive locking will not be necessary for all the tables; just for the single-row table used for generating sequence values with a cursor.
    I converted the sample program to VB.NET:
    Public Class Form1
    Private mbCancel As Boolean = False
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    Dim soConn As ADODB.Connection
    Dim soRst As ADODB.Recordset
    Dim sdData As Date
    Dim slValue As Long
    Dim slDelay As Long
    'create database vbtest
    'go
    ' CREATE TABLE [dbo].[ControlNumTest](
    ' [UltData] [datetime] NOT NULL,
    ' [UltNum] [int] NOT NULL,
    ' CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
    ' [UltData] Asc
    ' )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 80) ON [PRIMARY]
    ' ) ON [PRIMARY]
    mbCancel = False
    Do
    ' Configure the Connection object
    soConn = New ADODB.Connection
    With soConn
    .ConnectionString = "Provider=SQLNCLI11;Initial Catalog=vbtest;Data Source=localhost;trusted_connection=yes"
    .IsolationLevel = ADODB.IsolationLevelEnum.adXactCursorStability
    .Mode = ADODB.ConnectModeEnum.adModeReadWrite
    .CursorLocation = ADODB.CursorLocationEnum.adUseServer
    .Open()
    End With
    ' Start a new transaction
    Call soConn.BeginTrans()
    ' Configure the RecordSet object
    soRst = New ADODB.Recordset
    With soRst
    .ActiveConnection = soConn
    .CursorLocation = ADODB.CursorLocationEnum.adUseServer
    .CursorType = ADODB.CursorTypeEnum.adOpenForwardOnly
    .LockType = ADODB.LockTypeEnum.adLockPessimistic
    .Open("SELECT * FROM dbo.ControlNumTest")
    End With
    With soRst
    sdData = .Fields!UltData.Value ' Read the last Date (LOCK INFO 1: See comments bello
    slValue = .Fields!UltNum.Value ' Read the last Number
    If sdData <> Date.Now.Date Then ' Date has changed?
    sdData = Date.Now.Date
    slValue = 1 ' Restart number
    End If
    .Fields!UltData.Value = sdData ' Update data
    .Fields!UltNum.Value = slValue + 1 ' Next number
    End With
    Call soRst.Update()
    Call soRst.Close()
    ' Ends the transaction
    Call soConn.CommitTrans()
    Call soConn.Close()
    soRst = Nothing
    soConn = Nothing
    txtUltNum.Text = slValue + 1 ' Display the last number
    Application.DoEvents()
    slDelay = Int(((Rnd * 250) + 100) / 100) * 100
    System.Threading.Thread.Sleep(slDelay)
    Loop While mbCancel = False
    If mbCancel = True Then
    Call MsgBox("The test was canceled")
    End If
    Exit Sub
    End Sub
    Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
    mbCancel = True
    End Sub
    End Class
    And created the table
    CREATE TABLE [dbo].[ControlNumTest](
    [UltData] [datetime] NOT NULL,
    [UltNum] [int] NOT NULL,
    CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
    [UltData] Asc
    )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
    ) ON [PRIMARY]
    go insert into ControlNumTest values (cast(getdate()as date),1)
    Then ran 3 copies of the program and generated the deadlock:
    <deadlock>
    <victim-list>
    <victimProcess id="processf27b1498" />
    </victim-list>
    <process-list>
    <process id="processf27b1498" taskpriority="0" logused="0" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1970" ownerId="3181" transactionname="implicit_transaction" lasttranstarted="2014-02-14T15:49:31.263" XDES="0xf04da3a8" lockMode="X" schedulerid="4" kpid="9700" status="suspended" spid="51" sbid="0" ecid="0" priority="0" trancount="2" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="21152" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3181" currentdb="35" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
    <executionStack>
    <frame procname="adhoc" line="1" stmtstart="80" sqlhandle="0x020000008376181f3ad0ea908fe9d8593f2e3ced9882f5c90000000000000000000000000000000000000000">
    UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </frame>
    <frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
    unknown </frame>
    </executionStack>
    <inputbuf>
    (@Param000004 datetime,@Param000005 int)UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </inputbuf>
    </process>
    <process id="processf6ac9498" taskpriority="0" logused="10000" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1971" schedulerid="5" kpid="30516" status="suspended" spid="55" sbid="0" ecid="0" priority="0" trancount="1" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="27852" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3182" currentdb="35" lockTimeout="4294967295" clientoption1="671156256" clientoption2="128058">
    <executionStack>
    <frame procname="adhoc" line="1" sqlhandle="0x020000003c6309232ab0edbe0a7790a816a09c4c5ac6f43c0000000000000000000000000000000000000000">
    FETCH API_CURSOR0000000000000001 </frame>
    <frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
    unknown </frame>
    </executionStack>
    <inputbuf>
    FETCH API_CURSOR0000000000000001 </inputbuf>
    </process>
    </process-list>
    <resource-list>
    <keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
    <owner-list>
    <owner id="processf6ac9498" mode="S" />
    <owner id="processf6ac9498" mode="U" requestType="wait" />
    </owner-list>
    <waiter-list>
    <waiter id="processf27b1498" mode="X" requestType="convert" />
    </waiter-list>
    </keylock>
    <keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
    <owner-list>
    <owner id="processf27b1498" mode="U" />
    <owner id="processf27b1498" mode="U" />
    <owner id="processf27b1498" mode="X" requestType="convert" />
    </owner-list>
    <waiter-list>
    <waiter id="processf6ac9498" mode="U" requestType="wait" />
    </waiter-list>
    </keylock>
    </resource-list>
    </deadlock>
    It's the S lock that comes from the cursor read that's the villian here.  U locks are compatible with S locks, so one session gets a U lock and another gets an S lock.  But then the session with an S needs a U, and the session with a U needs an
    X.  Deadlock. 
    I'm not sure what kind of locks were taken by this cursor code on SQL 2000, but on SQL 2012, this code is absolutely broken and should deadlock.
    The right way to fix this code is to add (UPDLOCK,SERIALIZABLE) to the cursor
    .Open("SELECT * FROM dbo.ControlNumTest with (updlock,serializable)")
    So each session reads the table with a restrictive lock, and you don't mix S, U and X locks in this transaction.  This resolves the deadlock, but requires a code change.
    I tried several things that didn't require a code, which did not resolve the deadlock;
    1) setting ALLOW_ROW_LOCKS=OFF ALLOW_PAGE_LOCKS=OFF
    2) SERIALIZABLE isolation level
    3) Switching OleDB providers from SQLOLEDB to SQLNCLI11
    Then I replaced the table with a view containing a lock hint:
    CREATE TABLE [dbo].[ControlNumTest_t](
    [UltData] [datetime] NOT NULL,
    [UltNum] [int] NOT NULL,
    CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
    [UltData] Asc
    )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
    ) ON [PRIMARY]
    go
    create view ControlNumTest as
    select * from ControlNumTest_t with (tablockx)
    Which, at least in my limited testing, resovlved the deadlock without any client code change.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Hide unhide rolemenu in web with only one link

    Hi together
    is it possible to hide unhide the role menu in web with only one link by using command urls?
    Regards,
    M. Erbil

    Hi Memo,
    use something like this:
    <!-- BW data source object tags -->
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="SET_PROPERTIES"/>
             <param name="TEMPLATE_ID" value="ROLEMENU"/>
             TEMPLATE PROPERTIES
    </object>
    <HTML>
    <HEAD>
    <TITLE>Rolemenu</TITLE>
          <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
         <script type="text/javascript" >
    /* This function switches the attribute HIDDEN (alternate Tablestyles) for item mytable 
    1. Get actual value for attribute  HIDDEN
    2. Send Commando with new attribute to BW Server  */
            function switch_visibility(mytable) {
             var prop = SAPBWGetItemProp(mytable);
             var visibility='X';
             if (prop != null){
                      for(i=1;i<prop.length;i++){
                                if (prop<i>[0] =="HIDDEN") visibility = prop<i>[1];
                if (visibility =='X')  {
                               visibility=' '
                else
                            visibility = 'X';
                SAPBWOpenURL(SAP_BW_URL_Get() +'&item=' + mytable +'&HIDDEN=' + visibility);            
         -->
         </script>
    </HEAD>
    <BODY>
    <P> <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="ROLEMENU_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_MENU"/>
             <param name="WIDTH" value="335"/>
             <param name="GENERATE_CAPTION" value=""/>
             <param name="TARGET" value=""/>
             <param name="HEIGHT" value="285"/>
             <param name="IFRAME" value="X"/>
             <param name="IFRAME_STYLE" value="X"/>
             <param name="HIERARCHY_COLOR" value=""/>
             <param name="DIFF_ICONS" value=""/>
             ITEM:            ROLEMENU_1
    </object> </P><!&mdash;Include a button in HTML with id mybutton1. By clicking on link the function switch_visibility for item ROLEMENU_1 will be executed &agrave;
    <table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
    <table>
    <tr>
       <td class="SAPBEXBtnStd"   id="mybutton1" > <A href="javascript:switch_visibility('ROLEMENU_1');" >show / hide menu</A> 
       </td>
    </tr>
    </table> 
    </td>
    </tr></TABLE><!&mdash;  call function set_button, to set the correct style class for button  mybutton1 &agrave;
    <script type="text/javascript" >
    <!--
          set_button('ROLEMENU_1', 'mybutton1');
    --></SCRIPT>
    </BODY>
    </HTML>
    Regards,
    Adem

Maybe you are looking for