Different Exchange rate in MIRO

Hello,
MIRO is being done in foregin currency (PO was also in foregin currency), but during MIRO, user wants to give his own exchange rate, instead of that being picked up system, since for these MM invoices, the physical billls which they are getting are using different exchange rate, hence user wants to enter such a rate, which will equal the amount being present in the physicall bill..
How is it possible (or) sggest best practice for same?
Thanks
balla

Hi Balla,
To change exchange rate in MIRO, follow the following process:
1) Go to MIRO
2) Enter Invoice date, Reference and change the currency to USD
3) Go to details tab page and enter the rate that u require
4) Enter the PO no and press enter and proceed as usual.
Kindly note that once u put inthe PO no and press enter the ex rate field in details tab becomes uneditable.
Regards,
Kiran

Similar Messages

How to maintain different exchange rate for MIRO(customs), MIGO -inventory?

Hi,
My client requirement is like the MIRO for custom clearing agent has to happen @ the exchange rate mentioned in Bill of entry but the Inventory value has to be updated @ some other exchange rate - (exchange rate computation made with respect to vendor invoice)
Regards,
archu

Hi Balla,
To change exchange rate in MIRO, follow the following process:
1) Go to MIRO
2) Enter Invoice date, Reference and change the currency to USD
3) Go to details tab page and enter the rate that u require
4) Enter the PO no and press enter and proceed as usual.
Kindly note that once u put inthe PO no and press enter the ex rate field in details tab becomes uneditable.
Regards,
Kiran

Exchange Rate in MIRO differs from exchange RATE in MIGO

Hello
We use the following procedure:
- Purchase Order currency = USD, goods-receipt-based invoice verification indicator is set in purchase order
- MIGO currency = USD (We have a lot of goods receipts with reference to the same purchase order position at diferent dates, and consequently to different exchange rates).
-MIRO currency = CLP (Chilean pesos)
Invoice verification is made on a different date of all the goods receipts, using different exchange rates. The system use the document date in invoice verification for currency translation. My client needs that the system post the invoice verification using the exchange rate of the date of good receipt for each position.
Is it possible to solve this problem using the standard SAP?. I was thinking to use a user exit to change the values in MIRO screen. Do you konw what user exit may we use?
Thank you

I tried the flag "Exchange rate fixed", but my client needs to make invoice verification in local currency CLP (Chilean Pesos). Purchase order currency is USD. When we set "Exchange rate fixed", indicator, invoice verification currency must be equal Purchase Order currency. This is nos the solution
Thanks any way

Different Exchange Rate between Daily Transactions and Tax Transactions

Hi All,
I would like to ask abount define Exchange Rate for tax calculation. I set our standard exchange rates (For Daily Transactions) by using exchange rate type 'M'. But I want to calculate the tax element using exchange rate type 'T'. It is because there is a different exchange rate which is used for Daily Transaction and Tax Transactions. Does anyone know a way of doing this in config to separate this exchange rate for tax calculation?
Thanks for any help,
John

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Manually entering exchange rate in MIRO despite having it fixed in the PO

Hello,
My PO's are entered with fixed exchange rate (KUFIX = 'X'), that is used both in MIGO and MIRO. Is it possible to use the fixed rate only in MIGO, and enter a different exchange rate manually in MIRO ?
Thanks in advance,
Joã

yes it is possible
sorry for wrong answer
I have tried in system and as all says exchange rate cant be change if it is fixed in PO
Edited by: Umakant Bhangale on Jan 12, 2010 11:47 AM

Different exchange rate on each material issued for order

Hi all,
I have strange situation like this. Controlling area currency is USD and object/company code currency is THB. When i do Good Issue for production order, system use different exchange rate for each material although all of these material are posted on the same posting date for good issue.
Example :
I do Good issue material A and material B for production order 100000 at posting date 01.03.2008. When i look into cost analysis and look for USD currency, i found that exchange rate for material A is 30 THB/USD and exchange rate for material B is 25 THB/USD. FYI i use exchange rate type m. How can this happen?? How can each material have different exchange rate although its transaction at the same posting date??
I'm waiting your advice.. Maximum point will be given.
Best regard,
Yudha

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Vendor Invoice w/ different exchange rate on taxable amount and tax amount

Hi Experts,
I have an issue with regarding the Vendor Invoice with Foreign Currency. Normally we use JPY as our base currency and system exchange rate for out Vendor Invoices. But there was an audit issue pointing out that the Original Vendor Invoice is not tallied with the SAP Invoice as the tax amount is not the same. The problem is the Original Invoice has the Vendor Exchange Rate and it is not the same with the system rate that we use. Auditor tells us that we should use the Vendor Exchange Rate for Tax Amount and use the System Exchange Rate for the Taxable Amount. Is this possible? Can we use 2 Exchange Rates in a single Invoice Document one for the taxable amount and one for the tax amount? How can we possibly do this? Or any workaround?
Thanks a lot for the information!

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Reissue payment - with different exchange rate

hi,
Is it possible to reissue the payment,with the different exchange rate?? the reissue list box is disabled in payments screen?
pls help me...
thanks a lot n advance...

any suggestion???!!! it is wire transfer...but the transfer had not completed..at this stage if end user needs to reissue payment with new exchange rate????
Edited by: prety on Aug 28, 2010 9:57 AM

Different Exchange Rate Type for Vendors and Customers Invoices

Dear Friends,
We have configured different exchange rate types for Accounts Payable and Accounts Receivable thru T Code OB07. What are the additional Config steps required to ensure that the respective buying and selling rates will apply to Accounts Payables and Receivables. We do not want to stipulate the exchange rate types in Document Types as this special exchange rates are applicable only for one of the Company Codes.
Would appreciate your help in this regard.
Regards,

Hi,
Then you can use a different document type for those company codes and can default the exchange rate type there.
OR,
The alternative wya is to use the substitution in OBBH/ GGB1 for those company codes with exit programming.
Regards,
SDNer

Change exchange rate after MIRO

Hi Expert,
Please help me ..................
I created PO used currency USD. I didn't check "Fixed Exchange rate" in PO.,
When I'm doing Invoice received, I forgot exchange rate in Details tab in MIRO (system display exchange rate difference from PO) and I have invoice docuemnt.
I want to change exchange rate in Details tab in MIRO.
How can I do?

Hi Anjali
I can't change the exchange rate in MIRO detail tab.
Please help me.
Thanks.

Utilizing different exchange rate type for same currency combination

Hello Gurus,
I wanted to get your opinion/experience in handling the following scenario.
We have company codes in different countries operating using different local currencies. There is alternate exchange rate type EURX defined for Exchange rate type M for many currency combinations due to business requirements. One country with local currency EUR is utilizing EURX SEK - EUR exchange rate combination.
Other country with local currency HUF is making use of exchange rate type MNB as an alternate exchange rate. In one of its transaction, where VAT is being calculated on its foreign transaction, HUF company is trying to seek rate of MNB SEK- EUR where country currency is SEK and document currency is EUR.
But since on the 'translation ratios for currency translation' table EURX being the alternate currency for that particular combination, even when we set MNB SEK EUR exchange rate, the system is obviously picks up EURX rate.
Has anyone come across similar scenario where different countries trying to get different exchange rate types for the same combination of currency? and If so, how would that be possibly handled through config or using something custom?
Thanks all for your replies in advance.
Regards,
Sagar K.

Hi Sagar,
In tcode OBBS, if Alt.exchange rate is used for any currency pair, then that rate is used ( EURX in this case).
All countries in EMU region uses EURX ( which is mostly fixed after introduction of EUR).
If the company is in different countries in Europe, then mostly EUR is used as Alt. exchange rate. which uses EUR as reference currency.
Ther is no country specific settings in std. sap for a currency pair.
Cheers,

Different exchange rate type for budgetting internal orders

Hi,
we would like to use a different exchange rate types when budgetting on internal orders depending on the order type.
In our current set-up the internal order types are linked to a budget profile, in this budget profile we have specified the exchange rate type to use.
Unfortunately this doesn't work (I guess this is only used to translate the total budget)
We do availability control in company code currency and on a yearly base, but each time we approve some budget we want to translate this at the most recent (monthly) exchange rate.
This works if we change the exchange rate type P each month so that it contains the most recent exchange rate on the first of januari.
Unfortunately this P-rate is also used for other things (other budget on other order types and cost center planning) here we want to be able to keep the same exchange rate throughout the whole year.
If anyone could help it would be greatly appreciated!
Thanx in advance
Sven

Please check the following help http://help.sap.com/erp2005_ehp_03/helpdata/EN/1b/75a9371c726343e10000009b38f842/content.htm

Different exchange rate type for PO

Hi,
I have a requirement, where I need to take a different exchange rate type for one particular PO document type.
I have already maintained exchange rate type Z in Tcurr table.
I should enable system to pick this exchange rate for PO wich are created from a PO document type
Same exchange rate should be picked for GR and IR as well.
If I overwrite the PO exchange rate in PO header, GR and IR are picked default M exchange rate type.
If I maintain Z exchange rate for doc type WE and RE, the same would taken for all POs GR/IR.
I should make it available only for a PO document type and relevent GR/IRs.
Can you please advise how we can achieve this.
Your help in this regard is much appreciated.
Thanks,

Any Advise.

User exit for manually calculating exchange rate in MIRO

Dear All,
i want to change, exchange rate in MIRO transaction.
for that i have used user exit MRMH0003 (Logistics Invoice Verification: Revaluation/RAP), but unfortunately it doesn’t work.
so, can you please suggest, the better way to do this.
thanks and regards,
Kaushik

I,
Please take a look at BADI AC_DOCUMENT

In an accounting entry vat line should post with different exchange rate how to do that.

In specific jurisdictions invoices in foreign currency should also show
exchange rate and translated VAT amount in local currency. The required
exchange rate may change by country, although often the central bank
rate is required to post the VAT amount. and BASE AMT to be posted in 'M'(MOR) rate
So base amount and vat amount will be converted with 2 different
exchange rate types respectively.
below accounting entry should generate.
                                            GBP        EUR
DR CUst                              100          111.11          0.9 MOR
Cr   Revenue                          90          100               0.9 MOR
Cr   VAT                                10          12.50            0.8 ECB
Dr   Exchange rate diff                          1.39
how should we proceed to develop the solution for this.
Thanks
kartik

In specific jurisdictions invoices in foreign currency should also show
exchange rate and translated VAT amount in local currency. The required
exchange rate may change by country, although often the central bank
rate is required to post the VAT amount. and BASE AMT to be posted in 'M'(MOR) rate
So base amount and vat amount will be converted with 2 different
exchange rate types respectively.
below accounting entry should generate.
                                            GBP        EUR
DR CUst                              100          111.11          0.9 MOR
Cr   Revenue                          90          100               0.9 MOR
Cr   VAT                                10          12.50            0.8 ECB
Dr   Exchange rate diff                          1.39
how should we proceed to develop the solution for this.
Thanks
kartik

Different Exchange rate in MIRO

Similar Messages

Maybe you are looking for