Different execution times for back ground jobs - why?
We have few jobs scheduled and each time they run, we see a different execution times. Some times, it increases and some times it decreases steeply . What could be the reasons?
Note:
1. We have the same load of jobs on the system in all the cases.
2. We haven't changed any settings at system level.
3. Data is more or less at the same range in all the executions.
4. We mainly run these jobs
Thanks,
Kiran
Edited by: kiran dasari on Mar 29, 2010 7:12 PM
Thank you Sandra.
We have no RFC calls or other instances. Ours is a very simple system. We have two monster jobs, the first one for HR dataand second an extract program to update a Z table for BW loads.
Our basis and admin confirmed that there are no network issues
Note: We are executing these jobs over the weekend nights.
Thanks,
Kiran
Similar Messages
-
Function Module to find the Last Execution date of Back ground Job
Hi,
Is there any function module to find the <b>last execution date of back ground job</b>.
So that I can transfer the data from SAP to Legacy system based on the document creation date should be in between last execution date and current date.
thanks in advance.
Eswar.Don't know of a function module, but you should be able to use the information in table TBTCO to get the last start date and time of the job you are interested in.
-
Am unable to see all COLUMNS of my_ALV in SPOOL from a BACK GROUND JOB, Why
hi experts,
pls. clarify m ysimple doubt that,
Am running a ALV report in my_BACK GROUND..........this ALV contains 16 comuns...........I ´got the SPOOL from the scheduled my_BACK GROUND.......I noticed that, ONLY 9 columns are showing up?????????????
so,
1 - If I take print, all the columns will come show up?
2 - If I/user waanna to see totla columns, than How to get it done?
3 - Why SAP is so?
thanqHi Srini,
I do faced the same problem and struggle a lot. I have done two things and My problem is resolve .
1. First my Report autom mail come in PDF format that we have change to HTML view. (Basis people can do it.)
2. Page format previously it was X_44_120 we have change it to X_58_170 and the problem is resolve.
hope it will be help full for you.
Regards
Swati.... -
Hello Forum-Members,
I have a problem concerning the execution of an TestStand-Sequence in LabVIEW. I have created a VI that offers the ability to choose a TestStand-Sequence-File and then executes the sequence using the TestStand-API. The implementation is based on an example in C++-Application found following this link:
http://forums.ni.com/t5/NI-TestStand/Unreleased-references-using-engine-API-in-C/m-p/2927314#M46034
The implementation works quite solid in case the VI is executed the first time. The VI processes the chosen sequence in a acceptable duration.
But in case the execution is started a second time, the execution of the sequence takes ca. 30sec more than in the first case.
Until now I have not found a solution and hope someones got a hint concerning this problem...
I am using LabVIEW 2013 and TestStand 2013.
I have attached my own VI, a sample sequence with a small sample VI, so you can reproduce the problem.
Kind regards,
TobiKi
Solved!
Go to Solution.
Attachments:
Exe-TestStand-Sequence.vi 25 KB
Sequenz.vi 8 KB
Test-Sequenz.seq 5 KBHi Norbert,
first thanks for your answer.
What would be a reasonable way to replace the "Execution.WaitForEndEx"? My first idea is to get the respective thread of the execution and use the "Thread.WaitForEnd".
To clarify my problem:
The execution of the sequence itself takes longer time and so the execution of the calling VI. I have attached pictures of the log file of the first and second execution.
Further I don't get any dialog popups during the shutdown of TestStand. (I have activated the "ReportObjectLeaks" using the "DebugOptions") While developing the attached VI I've gotten several popups. But these popups disappeared after closing all references.
Maybe you have another hint how to locate the problem.
TobiKi
Attachments:
FirstExecution_20-08-2014.png 16 KB
SecondExecution_20-08-2014.png 16 KB -
Regarding back ground job scheduling
Hi,
one of our program was sheduled for back ground job, by another user, so just i need to knwo when this job is sheduled and it is executing daily, so, i need to knwo whether he has created a background job through , sm36, or through a program, how could i found it out.
thanks in advance.
joguIt is difficult to say. But if you can go to SM37 and check the log of the JOB it will dispaly you some messages.
This might help you.
Regards,
Naimesh Patel -
How to download data which comes in back ground job to presentation server.
HI ,
I am creating one job which has to download data to presentation server.
for back ground jobs gui_download will not work..
plz sugest the alternative for this...
thakns in advance,
khasimsathere are so many posts in SCN , please search .
write data to application server in background and then download to presentation server online. -
Create Back ground job for data recieved from a legacy system
Hi All,
I have a requirement where i need to schedule a back ground job once a proxy is triggered for the address data sent from a Legacy system. This proxy is triggerred from SAP PI, then i need to create a job shedule where address data is created as BP's(Business Partners) and assigned to a already created Target Group. Then once the Target group is completed with all BP needs to assigned to aCampaign Id. As the data is large it takes lot of time to execute. Please Advice.
Regards,
Nagesh ThanneeruHi
If you can divide the data into two internal tables and later collect into the one internal table, this could solve yuor problem.
Also you need to make sure that enough memory is available in the system. Check DB6cockpit for that.
Also there are a lot of correction notes available with SAP for the error"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
Check what the job exactly does, and search for the relevant notes, as there are different notes for different application areas...
if its a loading job(Infopackage) you can reduce the data packet size of the IP, but that might hamper the loading performance.
Hope this helps
Regards
Shilpa -
Back ground job completion date and time
Hi Experts,
I am running one back ground job.I need that job completion date and time.
where that values are stored.i need that table name where these values are storing.
please let me know its urgent.
Thanks in advance.
TharanginiHi,
TBTCP-Background Job Step Overview
For the date:TBTCP-SDLDATE
Time:TBTCP-SDLTIME
And TBTCO--Job Status Overview Table
Regards,
Shiva Kumar -
Back ground job for automatic MRP run
Hi pp guru,
my client want for a particularly material no XXXXXX ,there should be automatic MRP rum daily at 8:00 pm.
kindly suggest me how i will map back ground job in sap..
regards
AqueelDear Aqueel,
1.Either make a copy of the MRP type say PD and assign the new MRP type to that paticular material.
2.Or else assign one MRP controller sepecifically for this material.
3.Activate the User Exit M61X0001 which allows to run the MRP in background based on MRP type or
a MRP controller.
4.Create the varaint for running MRP in MDBT.Schedule from here.
or else use SM36 select the program RMMRP000 and select the variant and go to scehduling and
select the time and execute.
Regards
Mangalraj.S -
Define back ground job for Maintenance Order Settlement through KO8G
Hi Experts,
I need to define back ground job for Maintenance Order Settlement through KO8G transaction code.
Here are the requirements
1. The job should run on weekly basis automatically.
2. The settlement period and posting period should be taken care by the job dynamically. i.e. if the job runs in July, the job should pick up Settlement period and posting period as 7 automatically.
Kindly let me know the steps to define the back ground job as per above requirement.
SanjeevTo run the KO8G each week, the a RECURRING job has to be created. At my job, Basis/Ops department would create and schedule the job.
To have the posting periods, dates etc dynamically determined at the time the job runs:
Create the variant and save.
In 5.0, KO8G does not save a variant, therefore, go to SE38 and create a variant for program: RKO7KO8G
When you go to the ATTRIBUTES screen, to add a name and description, you will see a list of all the fields that are part of the selection criteria.
For an example, I frequently use the Posting Date. To the right of the screen is a field called Selection Variable, click on the drop box and select D - Dynamic Date Calculation.
Go to field NAme of variable, click on drop box and select the variable you want.
Each field has its own list of selection variable and name of variable depending on how it works in the progra.
If you look at Posting period you will see:
T: Table Variable from TVARVC
B: User-defined variables
I do not know about User defined variables, but for TVARC there is thread that leads to a "how to" blog
[How create a variable in the TVARVC that calculate the last week]
do some more searching and you should find more answers
Good luck
Althea -
hi,
is there any possibility to do back ground job for dtp.
if possible can u tell me the necessary settings?Hi Venkat,
The way to schedule a DTP in BI in NW 2004s is by putting it inside a process chain. The process chain can be scheduled.
See the following link on process chains.
http://help.sap.com/saphelp_nw04s/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Hope this helps,
Regards
Karthik
Assign points if helpful. -
Back Ground Jobs for ESS/MSS
Hi,
I would like to know all the back ground jobs to be scheduled for ESS/MSS.
As all the data updated in the portal as to reflect in r/3 system and all the data updated in r/3 system to portal.
Regards
VishYou need to set the background jobs depending on the functionality which is being implemented and what the data ?
for eg: if it's leave request there background jos which needs to scheduled
RPTARQEMAIL (Leave Requests: Send E-Mails)
RPTARQPOST (Leave Requests: Post)
RPTARQSTOPWF (Leave Requests: Complete Current Workflows)
hope this would help you.. -
Error in Back ground job schedule for call transaction
Hi Experts ,
I have a Program which as Three BDC in it . 1 - to create contact person , 2- customer 3-sales order
Using call transaction if i run with all screens and no screens it's running fine..
if i schedule it background job
conact and customer works fine but sales order not works ..
can anyone give me the solution ?Hi Phani and Pavan ,
It works Fine for Back ground anf fore ground i.e ( N and A ) sales order is created here .
but Sales order not created when i schedule it in back ground as
Program - execute in back ground .
sales not created when i schedule it in background job only using SM36 or Program - execute in back ground ?
Edited by: Pradeep Annaiah on Jan 13, 2009 5:29 AM -
Error while using Back ground Job for Planning function in BPS
I have created FM and Program for scdualing Back ground Job for Planning function.
I have created Planning function with exit option and passed parameter Global seqence name.
Error is lot of Jobs are creating while exe in BPS0
Kindly help me the same
Regards
GRHi Rama,
It seems there are two diff. functional modules (UPC_BUNDLE_EXECUTE AND UPC_BUNDLE_EXECUTE_STEP). The second one divides the planning sequesces on the basis of something you specify (e.g. company code). Just make sure that you are using correct FM.
just a thought.......
Regards,
SK -
How to find the back ground job details
Hi All,
I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
Please informe me how to check this.
Thanks & Regards,
MuralikrishnaOn SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o Jobname: Name of the job as an identifier.
o Username: Name of the user who designed and planned the job.
o Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.
Maybe you are looking for
-
I try hard but do not managed, I can't get the variable situaded inside a step? I have created my sequence object then my step object (I can get the right name of this one) but I didn't find in the help the method allowing to get any value of the ste
-
What's the best way to pack a small website for the iPad?
I have my little personal archive in HTML and images and a few audio & video clips. Let's say it is 10GB. I want to pack it into an App for offline viewing. Any suggestions? I'm will to do a lot of glue translation hacking to make something good. Or
-
Apple Raid Card panic on Mac Pro Early 2008 after installing SSD as an enhanced JBOD.
I recently installed a SSD drive in my Mac Pro to replace an aging, original boot drive. I have an Apple raid card with 3 other hds attached - all in an enhanced JBOD configuration. After installing the SSD from OWC (3G Electra SATA II Compatible)
-
XML Dataset - Sorting non english characters
I've been playing with spry on a production site for more than a year now. It's turned out to be a great solution in many situations in spite of being a beta release. I've found an issue concerning the sorting of text data (in this case, coming from
-
Trying to find out where Acrobat stores its temp files while creating/printing a new PDF and if it is possible to tell the program to use another location. My guess, and I could definitely be wrong, is that our Sys Admins have locked users from writ