Different flash version numbers reported

I am experiencing a weird discrepancy in the reported version numbers for Showckwave Flash.
If I go to the Add-ons Manager (about:addons), it says I'm running Flash v. 16.0.0.296, but if I go to your online plug-ins checker (https://www.mozilla.org/en-US/plugincheck/), it reports that I'm running v. 16.0.0.305 - which is also what's reported by the Flash applet in the Windows Control Panel.
So can you tell me why there's this difference and how I go about fixing it?
Kind regards,
Martin
System:
Win 8.1 64-bit
Firefox 36.0

The ActiveX version of Flash Player only works on Internet Explorer or IE and not other browsers as Firefox uses the Plugin based version.
https://www.adobe.com/products/flashplayer/distribution3.html

Similar Messages

Diff Results for Different Flash Versions

Hello all,
I recently made a flash movie with Adobe Flash CS3. The
unfortunate thing is it keeps looping in
Flash Player 8 ( which I had on Firefox ) but works like I
designed it to ( runs once ) on Internet
Explorer ( Flash Player 9 ) using stop( ) in ActionScript.
Was I upgraded Flash 8 to Flash 9 on Firefox,
it worked great.
My question is I didn't think there should be these kind of
differences between Flash versions. What if my users don't have
Flash 9? I was never prompted to upgrade, I just happened to figure
it out.
Thanks for any help.
David

If you published to Flash Player 9, then yes, you need to
have Flash Player 9. You can always publish down to Flash Player
8/AS2.

Need list of Crystal Reports Version Numbers by Product and Service Pack

Hi All,
Where can I get a list of Crystal Reports Version Numbers by Product and Service Pack? I'm trying to figure out which version we have is the most current version, because we have so many version installed threw out our company.
Thanks.

Hi Matt,
Please check the crystal Report 2008 product versions
Cr 2008+SP0 - 12.0.0.683
Cr 2008+SP0 + FP1 - 12.0.0.796
Cr 2008+SP0 + FP2 - 12.0.0.840
Cr 2008+SP0 + FP3 - 12.0.3.900
Cr 2008 + SP1 - 12.1.0.882
Cr 2008 + SP1 + FP1.1 - 12.1.1.957
Cr 2008 + SP1 + FP1.2 - 12.1.2.996
Cr 2008 + SP1 + FP1.3 - 12.1.3.1028
Cr 2008 + SP1 + FP1.4 - 12.1.4.1068
Cr 2008 + SP1 + FP1.5 - 12.1.5.1096
Cr 2008 + SP1 + FP1.6 - 12.1.6.1116
Cr 2008 + SP1 + FP1.7 - 12.1.7.1144
Cr 2008 + SP1 + FP1.8 - 12.1.8.1176
Cr 2008 + SP1 + FP1.9 - 12.1.9.1290
Cr 2008 + SP1 + FP1.10 - 12.1.10.1390
Cr 2008 + SP1 + FP1.11 - 12.1.11.1454
Cr 2008 + SP2 - 12.2.0.290
Cr 2008 + SP2 + FP2.1 - 12.2.1.412
Cr 2008 + SP2 + FP2.2 - 12.2.2.453
Cr 2008 + SP2 + FP2.3 - 12.2.3.467
Cr 2008 + SP2 + FP2.4 - 12.2.4.507
Cr 2008 + SP2 + FP2.5 - 12.2.5.537
Cr 2008 + SP2 + FP2.6 - 12.2.6.567
Cr 2008 + SP2 + FP2.7 - 12.2.7.598
Cr 2008 + SP2 + FP2.8 - 12.2.8.638
Cr 2008 + SP2 + FP2.9 - 12.2.9.698
Cr 2008 + SP2 + FP2.10 - 12.2.10.810
Cr 2008 + SP3 - 12.3.0.601
Cr 2008 + SP3 + FP3.1 - 12.3.1.684
Cr 2008 + SP3 + FP3.2 - 12.3.2.753
Cr 2008 + SP3 + FP3.3 - 12.3.3.812
Thanks,
Naga.

Different definition of file version numbers in Jdev and Subversion

In the SVN Red book(http://svnbook.red-bean.com/), they say that updating a single file creates the new revision of the whole repository.
So even if a file has not changed, it still can go to a higher version.
+"Revision Numbers Are Different Now+
+In CVS, revision numbers are per file. This is because CVS stores its data in RCS files; each file has a corresponding RCS file in the repository, and the repository is roughly laid+
+out according to the structure of your project tree.+
+In Subversion, the repository looks like a single filesystem. Each commit results in an entirely new filesystem tree; in essence, the repository is an array of trees. Each of these trees is labeled with a single revision number. When someone talks about “revision 54”, he's talking about a particular tree (and indirectly, the way the filesystem looked after the 54th commit).+
+Technically, it's not valid to talk about “revision 5 of foo.c.” Instead, one would say “foo.c as it appears in revision 5.” Also, be careful when making assumptions about the evolution of a file. In CVS, revisions 5 and 6 of foo.c are always different. In Subversion, it's most likely that foo.c did not change between revisions 5 and 6."+
The above makes sense to me. But when I use JDeveloper with SVN, I see its showing me different version numbers with different files.
Can somebody explain. JDev essentially is showing the version of the file when it was last checked in, but because of changes in some other files, the "actual" version (as per the definition in redbook) might have changed...jdev DOES NOT show this change...why the apparent difference is what I want to understand.
Thanks,
Amit

Thanks for your replies.
@Timo - I checked out the project from SVN repository to a new folder. It still shows the old versions for some files. In other words, all files are not on same version as shown in app navigator.
@John - I have tried to reproduce the sections from the Redbook that I felt relevant and that led me to thinking what I am thinking (expecting) now.
--Amit

TS1702 I have have version numbers that are different to the ones stated in the appstore.

I paid for and downloaded direct from the app store Batman Lockdown for the ipad recently and instead of version 1.03 i see in my settings that it is version 8710.655 which appears to be a version not legal or from the apple store. MY device is new, not jailbroken and I deleted the app and tried to download from wifi as well as Verizon and i get the same issue...this is not the only app btw - about 5 of 20 of my apps all have version numbers not in line with the producer version...
Help understanding this would be great since this poses a lot of apparent issues with the security of my device, account and network obviously...thanks.

Reset your iPad by holding the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears. Then update your apps one at a time. Do not start the next app until the current one downloads and finishes installing.

After updating to Flash version 11.6.602.171 - can no longer play any embedded videos..and worse

To begin with, I'm running a clean AMD 64 Bit Windows 7 System. Never any problems with any of my video playing scenarios - until now - with this version 11.6.602.171.
After downloading and installing both versions - both for Firefox (other browsers) and IE, none of my browsers can play videos unless they are at their lowest resolution of 240.
So I used the Adobe Flash Uninstaller and ensured that the last vestages of Flash Player were removed - and reinstalled - all to no avail.
Then I downloaded the archived version of 10.3 to see if a previous version would work. But that wouldn't work either. None of my browsers will play videos now and I'm talking:
IE 10
Firefox 19.01
Avant Browser
Google Chrome
Google Chromium
Commodo Dragon
Commodo Ice Dragon
Opera
Waterfox
Pale Moon
None will play the video.
What you get is the video screen but unless you have a 240 option (lowest resolution), all you get is a green screen. You hear the talking/music, but there is no picture and all the green screen does is flash. Here's a JPG of the screen. If you put your cursor anywhere on the progress meter (arrow) it will show you a small image of what's supposed to be playing (see below), but the screen remains green and flashes while playing.
Now here is where it gets interesting. When I completely uninstall Adobe Flash Player and then go to a You Tube embedded video (on any site), there first appears a screen that tells you that you need a plug-in - but then within seconds (without downloading anything), the movie starts playing normally.
I then checked my Firewall (Zone Alarm) - turned it off temporarily - that wasn't the problem. Then checked my latest version of Avast AntiVirus software and temporarily turned it off - that was not the problem either. The videos still won't work and remain green unless you use the lowest resolution.
So this new version 11.6.602.171 has become a nightmare - but I'm afraid it messed up my system big time and I don't know what to do to alleviate this.
Crying HELP!!!!!!!!!!   Is there something I'm overlooking. I'm now screwed - way to go Adobe for releasing such a faulty software product.
Ben Herrmann
North Carolina

It sounds like we've got a number of *different* problems on this thread. I'll try and respond to a few of them.
@filter 2.5 and everyone else running into a green screen issue. Please try the solution outlined in the post below to see if it will allow you to use hardware acceleration. The other alternative is to try a different ATI driver.
http://forums.adobe.com/message/4865912#4865912#4865912#4865912
@pipseer - Somehow Internet Explorer's activex filtering was enabled on your system. This troubleshooting is also described in this FAQ: ActiveX Filtering in Internet Explorer
@Sahloknir - For the sound issue, we're going to want your system specs. Please start a new thread with:
Operating   system
Browser
Flash   Player version
Dxdiag Report Instructions
Sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
@mem2013 - The Flash Player update service will not impact Flash Player's performance. This is a separate service that runs for just an instant on your system once an hour (if you have automatic updates enabled.) Changing it from manual to automatic shouldn't make any difference.

When will Apple put the Adobe Flash version on the iPads?

When will Apple put the MS Adobe Flash version on the iPads? The iMac desktop has Quick Time, but there's nothing for the iPads that I know of.

Guess you haven't seen the analysts reports and sales numbers for Android tablets lately... Or heard that the tablet optimized version of IE in Windows 8 will be plug in free... Or heard that Adobe is now pushing a server product that will convert Flash video to HTML 5 for use on mobile devices.
A 1980 Chevy Chevette will do the same thing as a 2011 Mustang. I guess Ford is going to go out of business when everyone starts driving Chevettes.

Different display on client report builder and web reports

Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
My HPUX is 11x,and display the Chinese report .
Any body know why ?give me some advice ,thank u very much.

Hi
If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
Thanks
Rohit

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

PO Version change report

Hi All,
Please let me know if there is any standard report which could fetch me the following details:
1. PO changes line item wise with old & new values
2. PO version numbers for the changed PO's.
Thanks,
Sourabh Kothari

Hi,
Ask th ABAPER to develop a report or u can go to tables
T Code se16 and table name
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
or use aut10 T code also
this may help u
Regards,
Pardeep Malik

Latest flash version will not display images or video

Latest flash version will not display images or video in 2 x Windows 7 Pro 64bit machines, 1 x Windows 7 Home Premiums, and 1 x XP SP3 under VMWare Workstation 7. Problem plagues Firefox, Chrome, and IE on all systems. Also running Norton Security from Comcast on all machines. Disabling does not appear to help. Suggestions?

Not sure, this is the one that I really want to view. I am using the latest 11.6 ending in 168. Curious you got the images. The product ones act like they should be displaying for me but don’t. Can you do a capture of the images? The text with small images sometimes comes through and sometimes not. I wonder if there is a problem on the server end.
When I talk to the Customer Service people they claim to have no reports of problems, but like the sports pro about to be traded, they may be the last ones to know…

Visual Studio 2010 Production Release Version Numbers

I uninstalled the beta and installed the production release. After letting it convert my projects, I noticed that the version numbers for the .NET assemblies appear to be 13.0.2000.0 and in the beta version they were 14.0.2000.0.
Can someone from SAP confirm the version numbers for the production release?

Hello,
You are correct. The final build is version 13. Long story due to download sizes and integration. I've updated 4 Images now both 32 and 64 bit and had no problems. Other major change is there is no connectivity to BOE Enterprise and no plans to add it.
See this [Link |Crystal Reports for Visual Studio 2010 Production Release Now Available;for more info and known issues.
Thank you
Don

Safari tells me I have flash version 0, and it's just not true

I have a website (that someone else created for me. I know nothing of web design)It was created in flash v5. Until very recently I have had no problem viewing it on this computer using Safari, or any other browser for that matter.
Now, when I try to open the site, I get a prompt that states:
'You are using flash version 0
This website is optimized to run on Flash version 5 or above
Click here to download flash v 6'
I show that I have flash v9 installed. And, I am able to view my web site on other computers.
Any ideas as to what the problem may be?
Thanks,
Peter

Hi,
I get the same error message using Firefox on Linux. As Klaus says below, the website needs to correct their site to work across different platforms.

Use different JRE versions in Oracle Discoverer 10g(10.1.2.0)

Hello.
We have a Oracle Forms application which also uses Discoverer Plus and Reports.
Problem is we have some user clients who uses XP/IE 6.0 while otheres has Vista IE 8.0.
Based on here
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
depending on OS/browser different plugin versions are required. If we
Can we have different JRE versions in separate clients? Kinda confused with the matrix.

Hi;
Please check below which could be helpful for your issue:
Overview of Using Java with Oracle E-Business Suite Release 12 [ID 418664.1]
Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 [ID 393931.1]
Oracle Jinitiator and Sun JRE/JPI Support for Oracle Forms Applications [ID 555720.1]
Regard
Helios

Different product versions displayed in spite of having applied misc v11.1.2.3.50x patches

All,
Once logged, here's what is displayed when I click on Help > About Oracle Enteprise Performance Management System Workspace, Fusion Edition then click on the [Show Details] button:
Explore - 11.1.2.3.000.1175
Reporting and Analysis Framework - 11.1.2.3.000.1175
Impact Management - 11.1.2.3.000.1175
Oracle® Hyperion Financial Reporting, Fusion Edition - 11.1.2.3.508.0939
Hyperion® Web Analysis - 11.1.2.3.504.11705
Oracle® Hyperion Enterprise Performance Management Architect, Fusion Edition - 11.1.2.3.500.2033
Oracle® Hyperion Planning, Fusion Edition - 11.1.2.3.502.04
Oracle® Hyperion Provider Services - 11.1.2.3.505.005
Oracle Hyperion Auditing - 11.1.2.3.0
Calculation Manager - 11.1.2.3.503.005
Oracle Hyperion Common Administration - 11.1.2.3.0
Oracle Hyperion Common Security - 11.1.2.3.0
Oracle Hyperion Lifecycle Management - 11.1.2.3.0
Hyperion Common Install - 11.1.2.3.0.8719
Oracle HTTP Server - 11.1.2.0
This is in spite of having successfully applied the following patches:
PSU v11.1.2.3.500
Patch 20029854 (Reporting And Analysis Framework v11.1.2.3.506)
Patch 19466859 (EPMA v11.1.2.3.501)
etc;
.. then re-deployed the java web applications.
I was wondering if anyone had any idea(s) as to the reason(s) why the above emboldened entries are still showing different product versions to the versions which the patches were supposed to have installed.
Many thanks,
JBM

Unfortunately not every version will update when you apply a patch, it may be worth reading through a blog I wrote on product version - More to life than this...: Understanding product versions in workspace
Cheers
John
http://john-goodwin.blogspot.com/

Different flash version numbers reported

Similar Messages

Maybe you are looking for