Different Format date LOV after migrated report

Hi,
I have migrated report from BO 6.1.3 to BO XI 3.1 SP3.
Report has migrated but i have one issue like:
The date format is different for lov of Report in 6.1.3 and XI 3.1 SP3, even when I recreate the prompt
Old Report 6.1.3 before migration                               'dd/mm/yyyy'
Old Report 6.1.3 after migration on XI 3.1 SP3            'mm/dd/yyyy'
New Report XI 3.1 SP3                                                'dd/mm/yyyy'
and when I run the query the data is incorrect.
Please let me know how we can resolve this issue....
Thanks

Diego,
Try converting the report from Deski to Webi and see how the prompts work out.
Longer term this is a better option anyway with Deski going in version 4.
Regards,
Mark

Similar Messages

  • Data mismatch after migration

    Hi experts,
    There is a mismatch in data when comparing a query o/p before and after migration...
    Can any one please tell wat may be the reason.
    This is urgent please.....
    Regards,
    Pruthvi

    Hi Pruthvi,
    What "migration" are you talking about? You did a BI upgrade, or migrated your server from a box to another without changing BI version or what? Is that a standard query or a custom one? Is there any restriction in that query on any infoobjects?
    First I would try to check the contents of the infoprovider (transaction LISTCUBE or RSA1), paying special attention to the selection criteria and the fields you want to display. Use exactly the same selections and fields that you have in the query.
    Regards,
    Csaba

  • Error in date prompt after migrating from 5.x to XI R2

    Hi,
    We have migrated from 5.x to XiR2  SP5 and are facing a problem with the date input parameter.
    Our users use DESKI , when they try to access thier reports  based on Stored Procedure,and the reports  having date prompt , they get an error.
    In 5.x they used to enter the date as DD MON YYYY , in XIR2 they enter it as MM/DD/YYYY but still we get the error
    "The variable is of type date enter its value in the format 9/17/2009 14:50:00 PM"
    The users tried this too but still the same error persists. The Oracle.prm and Oracle.sbo file on teh users machine is the same as that of the server.
    I am able to recreate this error after logging onto the server and opening DESKi there. This error is occuring only with Stored procedures that take date as input parameter
    has anybody faced this issue before, any resolutions for this
    Thanks in advance
    Shreekantha

    Hi,
    After analyzing this problem , what we found that no Stored Procedures that take user input are functioning, irrespective of teh datatype of the input prompt.
    For all SPs that take user input we get an error saying
    Connection or SQL sentence error: (DA0005)
    Exception: DBD, ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_TEST_WITHOUTDATE'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    State: N/A

  • Weird SSRS Format Date Output in Matrix report Header

    For one of my Matrix reports, the column headers are Dates which I am trying to format in the form of 'Mon 07' i.e. short date name followed by date value.
    For this I am using the expression - =Format(CDate(Fields!WorkedOnDate.Value),"ddd") I then wanted to trim the right 3 letters.
    I am getting weird output. Here is what I am getting for one week- Tue, We2, T12u,ri,SaA,Sun,7on
    Any idea what is going wrong? This was asked in this link but that answer didn't help - The
    date formats do not seem to work in SSRS
    Regards,
    Karthik
    Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    Hey Visakh, I realize my mistake now. I was adding the expression as part of Number-> Format property of text box instead of directly on the text box property. Thank you.
    Regards,
    Karthik
    Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Problem with the ECC6 Data sources after migration

    Dear All.
    I transfer all the data source which is required for sales overview cube 0SD_C03.
    lets take two senairos.
    for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
    the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
    in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
    can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
    i did not migrate the update rules into transformations.
    any help will be highly appreciated.
    kind regards,
    Zeeshan

    yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
    please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
    i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
    any help will be highly appreciated.
    Kind Regards,
    Zeeshan
    Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

  • Filing date of judgement is different from date listed on credit report.

    So first, let me say that my judgement is due to fall off in April of next year.  If it weren't for reading so many success stories and having many of my own (including an early deletion of the last paid collection account on Experian just yesterday) I might be willing to leave well enough alone. The problem is, the paid judgement is the last bad item on my report.  I just called the circuit court where my judgement was filed because the dates seemed off. I have copies of the money orders that I sent to pay the judgement and all of them were AFTER the judgement file date listed on my credit reports.  According to the clerk, my judgement was actually filed on January 12, 2009 not April 16, 2009. My question is, aren't civil judgements supposed to fall of 7 years from the filing date or is this the case of the 7 years 180 days I've heard about?  Did my payments somehow reage the judgement? If the date is indeed wrong, what is my next course of action? If the judgement rightfully is due to fall of January of 2016 I am within the 6 month range for requesting good will early deletion from at least two of the CRA's, correct?   I'd really like to buy a house next year at the best rate possible and my Fico scores are EX 709, TU 719, and EQ 721. I’m hoping this removal will help me get the best rate possible.  Thanks in advance for any insights/ opinions given.  

    Thanks for the docketing info! I'll start the ball rolling on that Monday. Regardless, if I can get the dates changed or no,t it's good to know that I have a possiblity of getting early exclusion on judgements as well. From what I read on this forum you can get a judgement vacated if he was improperly served. You can request the service info from the court where the Judgement  was placed. I, like Rebuilding, didn't show up for my court date because I assumed that being in contact and negotaiting payment was all I needed to do and judgement would be thrown out the window. Yeah I know, stupid.  Wow, if my judgement  falling off netted me 66 points I would keel over. It's my last baddie and the only bad thing on all three reports so my fingers are crossed.  Experian is an interesting one. In my case, they seem to hang on to anything and everything. The other CA's dropped most of my stuff a few months early without me even having to request it.  The only thing I had left was the judgement and one collection on Experian.  I called them mid june to ask for early deletion of the collection( 2 months ealy) because I heard they would remove it 3 months early. They turned me down, but I was very polite and thanked them  for their  time when they told me to call back April 1. I called them July 1 and after being transfered once my collection was removd. The phone call took less than 5 minutes.  It was due to fall of August 16 of this year.  The number I called was 1-800-360-7580. Note this account was not my oldest account and it was shown as being in collections so I wasn't in danger of having my Aaofa taking a hit.  Oh, one last thing. I don't think it's odd that one report had collections info that another doesn't. They not only differ in how long they keep stuff( my point about Experian having a collection nobody else had) I also think it depends on who the collector reports the info to I'll update if I get my judgement updated and EE. Otherwise Kaylavaand I will have our judgement removal day party April 16th of next year!

  • Data Encryption after Migration

    Hi,
    I have recently upgraded a single server deployment of on-premise MSCRM 2011 to MSCRM 2013. Data Encryption NOT enabled yet. Then have migrated this upgraded MSCRM 2013 to another server. During migration, ignored the warning message for Data Encryption.
    Now, after the organization import, it does NOT allow me to activate data-encryption and gives the following error message:-
    "Cannot perform 'activate' because the encryption key doesn’t match the original encryption key that was used to encrypt the data."
    -This is quite surprising that data encryption was NOT previously activated, but still giving the above said error message.
    Kindly advise.
    Thanks in Advance,
    Ajay
    \Ajay

    Thanks for you reply Jithesh,
    I did not use XML configuration to do the install.
    In my case the data encryption key was NOT mentioned and data encryption was Never enabled on the source CRM server before data migration.
    Now after the organization import, I have configured HTTPS on the new server and am trying to put the encryption key, where it is giving me the error.
    Any guess, why this error when encryption is NOT yet enabled?
    Thanks,
    Ajay
    \Ajay

  • User mail had date changes after migrating to dovecot

    I upgraded from 10.5.8 Server to Snow Leopard last week. A few problems occurred during the migration:
    1) Permissions to the /var/spool/imap/dovecot/mail/ were read only
    and
    2) Many random email messages had their date stamp changed to November 2020. Some users had a few, others had thousands.
    I've since repaired the permission issue, but is there a way to fix the date stamp? If you open the email it displayed the date correctly.

    I saw the same problem and manually reimported all of my mail stores since it was down and I caught it soon enough to not make a difference. There is a problem with how Setup Buddy does the importing. I found the directions in the migration guide to manually bring it over. Page 42 of the PDF.
    However if you've gone too far, I found this thread that may take care of it for you.
    http://discussions.apple.com/thread.jspa?messageID=10334902&#10334902

  • Sales Deal with two different validation dates for the same material

    Hi SAPers,
    I am trying to create a u201CSales Dealu201D VB31, for the same material/condition, but with two different validation dates. After the creation of the first record, I select u201CNew conditionu201D button, but the system give me the message VK104, u201Cthe condition is being processed in the current session.u201D.
    How can I solve this issue?
    Thanks in advance.
    Pedro

    We can't have multiple records for the same condition and key values valid on the same date. The condition end date is part of the primary key in the database table. The date ranges between the records cannot overlap. When you create a new record, usually the end date is set to 12/31/9999 by default. If you need to have this deal to end on a different date and a new deal to start afterwards, then first you need to change 12/31/9999 to a different date.
    Also usually I try to exit the screen between the transactions.

  • Date issue in webi report after migration to XI 3.1

    Hello All,
    We had designed a webi report in BOXIR2 with run date present in report header section. This report was working fine in XIR2 environment.
    However after migrating this report to XI 3.1 with sp2 and fp2.2, we have observed that date part is getting eliminated from the report header. If date is 13/01/2010, then only 13 is visible and rest of the date is getting out of report. This happens when we export report to PDF (We need final output in PDF).
    The same thing was working fine in XIR2. From 'properties' section of report,  we have verified that report format has not changed. Also we are using latest version of Adobe (9.2).
    Can you suggest us the steps to resolve this issue?
    Sincerely,
    Chinmay

    Hi,
    When you view the Report in WebI Format is the Date shown correct ?
    When you export the Report in xls. is the Date shown correct ?
    Could you please re- validate your formular in XI 3.1 for the date
    Compare the Format of the Object in the Universe between Rel.2 and XI 3.1 (if the Date informations in an object in your Universe)
    Only Adobe Reader 8.1.2 and 9.0 are supported. Can you please install one of these versions and retry ?
    Regards
    -Seb.

  • Report generation failed after migrated from 6i to 10g.

    Hi All,
    i have migrated the 6i application to 10g.
    There was a report which was generated in .html format and saved to a remote server location.
    Now after migration to 10g,when i run the report through the URL ,It is still generated on the same remote server location but the it is not showing in the application interface.
    Please help....
    Thanks,
    DK

    Hi, Mike,
    user3211655 wrote:
    Hi All,
    We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
    When login to the em to check, I found these 2 errors.
    Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
    Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
    My trigger is a very simple one:
    BEGIN
    Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
    END;
    And I'm sure the "TB_COUNER_SEQ" is there.
    Do I need to change anything on the trigger when migrating from 8i?
    In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
    It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
    GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too.

  • Error message downloading OBIEE Report to Excel "is in a different format"

    Dear experts:
    We just upgraded to 10.1.3.4.1 in our Dev environment and are seeing a pecuiliar behavior when we try to download a report to either "Excel" or "Excel 2000".
    After selecting Excel (or Excel 200) from the Download Link, we get the following message that pops up:
    The file you are trying to open 'Period Summary.xls' is in a different format than specified by the file extension. Verify the file is not corrupted and is from trusted source before opening the file. Do you want to open the file now?
    We are then given the choice of Yes, No, or Help
    When I click Yes, the File does open, but why this message? I can see the users complaining about this message.

    I found the link to MSDN site which states that this is a "known problem" and MS will provide a fix at a future date.
    http://blogs.msdn.com/vsofficedeveloper/pages/Excel-2007-Extension-Warning.aspx
    Also, the following metalink documents address this: 780817.1, 759410.1
    This is the expected behavior due to security restrictions implemented in MS Office 2007
    Solution
    The following is the workaround for this issue:
    Client desktops can change the default behavior of the security check using a registry key. The following registry key can be set to alter the behavior of the Excel 2007 client in the following ways:
    Disclaimer from Microsoft: WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
    Key: HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Excel\Security
    Value: (DWORD)"ExtensionHardening" = [0 = Disable check; 1 = Enable check and prompt; 2 = Enable check, no prompt deny open]
    I have searched through OBIEE Oracle docs, but didn't find any mention of this issue.
    Has anyone seen any OBIEE workaround for this?

  • How to print formated data/report on client's printer (Web Application)

    Hi All
    I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
    Application is web based
    Technology used are Java - jsp - servlets
    i want functionality like...
    when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
    Also printer selection dialog should displayed one time when user click on print button/link.
    Questions:
    1. How i will transfer all data to client (web browser) from the server ??
    2. And how i can print that data on user's printer ??
    There is requirement (or limitation) that I can not use applet for this purpose.
    And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
    There is solution like ...
    I can use window.print() function of DOM/JavaScript,
    but it prints only one page which is displayed on browser.
    I don't want to display any page. and want to print all pages.
    if any one done or have idea then let me know.
    Thanks in Adv.
    Shailesh Koradiya

    thanks linxpda for reply,
    we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
    if it is possible then let me inform.
    Thanks,
    Shailesh Koradiya

  • BI Publisher Report Layout Get Distorted when viewed in different format

    Hi Experts,
    I am facing issue while running BI Publisher Report.
    The Report Layout work fine in one output format (PDF).
    But when the same report is generated in different format it get distorted (HTML,EXCEL).
    Could any one please let me know how to resolve this issue.
    Is there any SR raised for this issue.
    Cheers,
    Andy

    Hi,
    I have faced a similar issue, Finally i created a different template for each output type, and tweaked each template through trial and error till the output it provided was what i was looking for in the specified output format, I had a different template for PDF and a different one for HTML. If I used the html optimised template for PDF out, there were all sorts of alignment issues, etc.and vice versa. As for the date format, you can set the parmeter correctly using the word date format properties.

  • I formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    i formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    SanandaDutta 
    tried on a different mac. The same problem exists.
    If that is the case, its extremely unlikely you have a bad USB cable on the seagate, rather as I mentioned earlier a bad SATA bridge card.
    If the Seagate 1TB USB external wont open on either Mac and youve verified same (try a diff. USB cable if you have one however this is nearly never the case),....then to get the data off that HD (unless it is dead which is also extremely unlikely),......then you would need to extract the HD from its case and insert same into either a HD dock or USB HD enclosure.
    8 out of 10  seemingly dead inopperable 1-3+ year old external HD are perfectly fine, rather the cheap 50 cent SATA bridge card fries and dies (alas)
    reply back if you need help in extracting same. 

Maybe you are looking for