Different framerates - how to combine - YouTube

Hello.
I was trying to find an answer for my question but couldn't.
I made an animation in AE which is 23.976fps, 16:9, full HD. I must connect it with a .flv file which is 13FPS (!) and 480x270px. I want then to export it to YouTube.
When I chose to make a new sequence from my 13FPS file and then export the .flv, my animation looks terrible. The output file is 13fps which I guess is strange frame rate.
When I was trying to convert the 13FPS file to 24fps, it plays with no problems as a standalone file BUT when I put it into premiere with my animation and then export it to 24fps, the audio is out of sync.
So, should I stay at 13FPS and export files to 13FPS even if my animation is 23.976?
Plus, I have another problem. These files are 16:9, right? (at least MediaInfo shows that) I've heard that the best size for YouTube is 320x240. How can I make this size out of 480x270? Or should I just upload 480x720?
Jesus, I just wanted to make movies and now my head is blowing because of all that codecs, fps, aspect ratios etc...

You might want to file this under 'WHAT IF'
What if you extracted your audio to a separate file. Now take your video files and combine them into one exported clip. Then try to synch your independent audio with the combined video tracks?
I had a similar experience one time and was able to complete the task, but not without painstaking synchronization.
Nobody said editing was easy - but with this forum, it can be a lot easier.
expeditionwest

Similar Messages

How to combine count() queries to tables in different environments?

Hi all,
I've got two tables that have the same schema, but slightly different data. One is a test db, and the other is a model office db (i.e. neither is a production db).
I run these two queries, individually, from within the test db:
select count(cdeSource), cdeSource
from schema1.SomeTable
group by cdeSource
order by cdeSource
select count(cdeSource), cdeSource
from schema1.SomeTable@TheModelOfficeDB
group by cdeSource
order by cdeSource
The column cdeSource can contain a 1 to 1 relationship with another field in the tables, but it can also contain a 1 to many with the other field.
Right now, I need to export each result into a file and then do a compare between the two to find the differences, between the two tables, out of the big results.
Question: How can I combine those two queires into 1, and show only the differences from the "count(cdeSource)" results column?
Thanks.
Edited by: we5inelgr on Jan 29, 2013 5:29 PM

we5inelgr wrote:
Example snippet of results:
Test environment
Count(cdeSource) | cdeSource
2 | "00.01" <---Same as other environment, would like to exclude
6 | "00.09" <---Same as other environment, would like to exclude
16 | "00.50" <---Different count, for same cdeSource. need to include
2 | "00.95" <---cdeSource only found in Test. need to include
2 | "72.1" <---Different count, for same cdeSource. need to include
Model Office environment
Count(cdeSource) | cdeSource
2 | "00.01"
6 | "00.09"
10 | "00.50"
3 | "72.1"
6 | "98.1" <---cdeSource only found in Model Office. need to include
I tried putting "MINUS" in between both queries, and it gives me an error: ORA-00933: SQL command not properly ended.
I tried wrapping that whole query, within a select * from () but gave me a different error: ORA-00907: missing right parenthesis
Other ideas how to combine the two?
Thanks.if & when you use valid syntax, then no errors get thrown.
We can not tell you what you do wrong, since you don't use COPY & PASTE to show us what exactly you do.
SELECT cdeSource, COUNT(cdeSource) FROM TABLE1
MINUS
SELECT cdeSource, COUNT(cdeSource) FROM TABLE1@remote_db;

Hi, I have converted different smartforms to pdf format.How to combine pdf?

Hi All,
I have converted different smartforms to pdf format. How to combine all the pdf's into single pdf.
I need all the smartforms to be in single pdf.
Please help me in this regard.
Thanks in advance.

Hi Keshu,
Individual pdf should be sent to individual user.
And at last all the pdfs of the smartform should be combined into one.
And admin have the provision to download it .
I mean the requirement is
For example.
For the month of september i will generate Pay Slip to each employee. And each pdf will be send to corresponding employee.
And finally all the pay slips of all the employees will be combined into single PDF and admin will download it and keep it for reference.
So as of now. I have generated individual pdfs and mailed it accordingly.
But how to combine it into one PDF is my question.
Please help me in this regard.
Thanks in advance.

My iCloud and FaceTime accounts are different. How can I combine them?

My iCloud and FaceTime accounts are different. How can I combine them so I can make calls from my macbook pro. One is my me.com account and one is another email account. Thank you

You should have purchased an external hard drive and backed up your entire system and important data before bringing it into an Apple Store to gave them do what you had them do.
If you had any important data, like photos, personal videos, important documents, large music library, etc and had lost all of this by having Apple "clean out" your Mac, without a backup of this data, you would have lost everything on your Mac that was important to you.

Does anyone know how to combine two apple ID's together?

I have found out that I have two Apple ID's! One is for my apps on my iphone and the other is for iTunes. Somehow they are set to different email addresses but are being sent to the same email address. Does anyone know how to combine them, so I use just one Apple ID?

This is my solution too.
You see, what I also downloaded all the free apps I have on iPhone to this account I choose to use, so this way I didn't need to change accounts (of course it was on the iOS 5 times)

How to combine sales and delivery data

hi
i have requirement to make a report from sales as well as deliveries. Important fields in report are sales document , material , plant , sales document type , country key , sold to party , ordered quantity , delivered quantity , price from vakon ( KBETR ), actual goods issue date.
The required extractors are 2LIS_11_VASCL, 2LIS_11_V_SSL ,2LIS_11_VAKON.
Problem is how to combine sales and delivery data as V_SSL has different key figures.Multicube is not the solution as dont have plant , sold to party and many other fields in V_SSL.
Kindly suggest how to combine sales and deivery data.
Regards,
Monika

I guess you do have shipping point in delivery.
In most scenarios shipping point may not(or) may be same like order plant.
Although they are different you can still roll up the delivery information to order level by plant since you have order # available as reference key in delivery.
With this reference key you can convert all delivery information to order (item) level.
I guess you can use one merge ODS with one cube (or) with 2 ODS for each at order level for validation.
You may have to map delivery type to order type as per R3 configuration as well.
speak with any Logistics guys for help.
cheers
Martin

How to combine 2 assembly files????

Is anybody how to combine 2 assembly files together??? the 2 assembly files are the generated codes of 2 different c files. Each c file has its own main function. ThANKS

Is anybody how to combine 2 assembly files together???
the 2 assembly files are the generated codes of 2
different c files. Each c file has its own main
function. ThANKSYou're so wrong, on so many levels.... where to begin....
This is a Java forum, not assembly.... the two languages couldn't be more different.
You should at least have posted the question to "Native Methods".
Also, what you say doesn't make sense.
C functions compile to generate "object code", ie. *.obj.
These are then "Linked" together, what a program called a linker.
If you actually do have "assembly language" source code, ie. in an *.asm file, then you use an assembler
to assemble it.... again to an object file *.obj. Then use a linker to link it.
My use of the phrase "object file" does not have anything to do with "object oriented programming".
regards,
Owen

How to combine several measures into 1 pie chart

Hello everyone,
I have a requirement to create a design studio application with a pie chart to show several measures.
It means that I have several different measures and I want to let each piece of the pie chart present 1 measure.
For example, I need to combine measure1 ,measure2, measure3(which correspond KeyFigures in Bex query) into 1 pie chart and there should have 3 pieces.I tried change swap axis option and put all measures into row, not works.
I am very appreciate if anyone could help. Thanks a lot.

Hi !
There is a tricky way to do that.
Read the following document How to combine several measures into 1 Pie chart
hope it helps,
Roman

How to combine a bar with a line in a chart

Post Author: rbcdexia
CA Forum: Charts and Graphs
We want to combine data in bars and with a line showing in one chart.
Is that possible? How do you configure your chart?
The line and the bars are based on the values from different fields in the same table.

Post Author: pareshb
CA Forum: Charts and Graphs
We are using Crystal Reports for Visual Studio 2005. Can you please let me know how to combine a bar with a line chart.
Thanks in advance.Paresh

How to combine the analog input and analog output vi's

Hi !
I have a perfectly running triggered analog input acquisition vi. I have a seperate vi for analog output that's running perfectly too. Can someone tell me how to combine these two operations so that I could get a vi that does simulataneous AI and AO without missing triggers. I have tried all the different kinds of configurations suggested by NI support but nothing seems to work. Can someone help ?
thanks,
Shiva
Attachments:
dac_good.vi ‏77 KB
adc_good_fw.vi ‏124 KB

Shiva;
I'm attaching a good Application Notes that shows how to synchronize multiple DAQ tasks, in Labview.
Hope this helps.
Filipe
Attachments:
Advanced_Sync_Techniques_for_DAQ.zip ‏166 KB

HT3819 I have an Ipod with a different ID how do I change to that library

I did it before I select Itunes and do shirt and click, but its been so long that I been on I can't remember. we have two different credit cards so I need my own account I guess. However, I don't mind sharing his songs he doesn't want some of mine and we set it up long ago with two different accounts and don't know now how to combine them have two libraries with one ID and/or two credit cards So I am fine with my own on one computer but cant get to my library to download purchased or from my old dvds. Help or show me where to go.

How to use multiple iDevices with one computer

How to combine two datarows (business component data) in BI Publisher

Hi ,
We are using BI Publisher in Siebel Environment.
We have data coming from two business components (like from 2 diff tables)
a) <?for-each:ssTest1?>
b) <?for-each:ssTest2?>
ssTest1 and ssTest2 are the business components
We need to combine these 2 datarows (a&b) and show the data into a single combined data row for ex like <?for-each:ssTest1ssTest2?> and show all the fields in that.
I'm not sure how we can combine these two data rows into a single combined data row and show the data.
Any help from any one would be apprecated.
Thanks
PV
Edited by: user8633002 on Oct 21, 2010 4:05 PM

Hi sajid
There was nothing more description about your issue in this site and I found an issue below is mostly like yours
http://www.codeproject.com/Questions/855487/how-to-combine-two-table-value-in-rdlc-report
In the issue above, if you want to show the two other tables in the report, I think you could combine the tables into one datatable joining on key. The link below show an example of a DataSet Helper from Microsoft about combine DataSets. Take note of
the related content for other DataSet Helper examples. And then you could use the datatable in your RDLC.
# HOW TO: Implement a DataSet JOIN helper class in Visual C# .NET
http://support.microsoft.com/kb/326080/en-us
In an alternative way, I think you could create a view in the database which combine your tables and use it in your rdlc.
In addition, your issue is about asp.net and you could get more support in the asp.net forum whose link as below.
http://forums.asp.net
Best Regards
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

I have Pandora uno that I been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Ihave pandora uno that i been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Not sure if you are asking how to obtain the Pandora app on the new phone? If so, the following has information for a variety of phone types including an iPhone: http://www.pandora.com/everywhere/mobile

I have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device?

i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine

Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes

Different framerates - how to combine - YouTube

Similar Messages

Maybe you are looking for