Different GL Account for WRX for Separate Asset Class

Hi Gurus
We are on 4.7 in a Production environment. We have the following scenario:
We have created a new asset class called as LA. For procurement of asset from this asset class, we want to maintain a different GL in the WRX (GR/IR) account key in OBYC. All the other assets should use the default WRX GL account except the new asset class LA.
Pls advise on how to achieve this.
Regards

Hi
Asset postings will not be based on valuation class/ class. What ever is the default GL account assigned in WRX (without valuation class) postings will hit that account.
Thanks

Similar Messages

HT204053 Can I have 2 different iTunes accounts? One for UK and one for US?

Can I have 2 different iTunes accounts? One for UK and one for US?

Assuming you are physically present in each of those countries when you wish to use the iTunes Store for that country, and that you have a payment method issued in each country with a valid billing or mailing address in that country, then yes. You'll need two Apple IDs, which will require two email addresses.
Regards.

Different GL Account for WRX - based on Valuation Class (No Material Master

Hi Gurus,
My scenario is as given below.
1. We do not have any Material Master. We create short text PO's with account assignment category "P".
2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1) and another Material Group (say M2) for Import Purchases.
3. We have assigned valuation class say 3100 for Material Group M1 and valuation class 3101 for Material Group M2.
4. Our plant is say RBUP and our valuation grouping code is say 0001 which is assigned to the same plant.
Objective:
While doing MIGO we want to have different GR/IR Account for domestic purchases say 108 and different GR/IR account for import purchases say 109.
Issue:
1. In OBYC setting GR/IR account is picked from transaction key WRX.
2. Our entries in WRX are as given below for our Chart Of Accounts say DMN.
Valuation Modifier Valuation Class GL Account
0001 108
0001 3100 108
0001 3101 109
3. But even when i am creating the PO with Material Group M2, it is not picking the GR/IR account 109, based on the valuation class i.e. 3101 which is assigned to the Material Group M2.
Query:
1. How can I achieve my objective of selecting GR/IR Account 109 for Import PO's and GR/IR Account 108 for Domestic PO's.
Pl note we will not be maintain material master.
Will give full 10 points if anyone can help me reslove this issue.
Pl also do not waste any of your valuable time to address the account assignments for BSX or GBB-VBR. I am fully aware that in VBR this differentiation is possible.
Rgds,
Prasad.

I suggest you to create a Dummy Materials. Lets say,
material number: 1001
enter material description as Domestic
material number: 1002
enter material description as Imports
and in OBYC for GBB
make the following settings:
val grp      gen mod    val cla      gl a/c dr     gl a/c cr
0001     VBR     4000     74180040     74180040
0001     VBR     4001     78020091     78020091
so that when u create PO u can get default GL (consumption GL ) for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
val grp   val cla    gl a/c dr   gl a/c cr
0001      4000     123456     123456
0001      4001     456789     456789
Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
hope this helps

Separate GL document for depreciation on separate asset

Hello,
I have done the depreciation in AFAB.
When I see the log details, it shows as single GL document for number of assets within an asset class. (as explained below)
Asset No. Sub No. Document No.
60008      0              300000010
60009      0              300000010
60010      0              300000010
Is there any way, that the system should create separate account document for each separate asset, when I execute depreciation.
Thanks in advance for your inputs.
Regards,
Ravi

I agree with you after reading SAP help.
There is also lot of performance considerations, the number of documents to be created are massive, hence I belive only details are in AA and totals in GL.
Thanks foryou input.
Regards,
Rvi

How do I make a different Mail account the default for sending new messages?

I have several email accounts in Mail. When I go to Preferences> Accounts I see them. The account on top of the list is the default one for sending mail. I want one of the lower ones instead. Can I select this or move it to the top position (if that is what gives it priority)?

Open Mail as usual and, at the sidebar, press the arrow next to "Inbox", so all your email accounts will show up under it. Simply hold the Command key and drag the email account you want to use by default to the first position. This will make it the default mail account to send emails

Two Different Sync Accounts (Address Book) for iPhone

My wife and I both have iPhone and sync our phones with iTunes.
She has all her contacts synced to the "Address Book".
Is there a way -- I can add mine to the Address Book as well without her getting all my contact as well when she sync's?
I do NOT want to set up another user account.
Any hints?

You could make a group of contacts call "Rohit" in address book and then go into iTunes with your iPhone connected and click "Sync Address Book Contacts" then click "Selected Groups" and only click Rohit contacts. Then do the same with your wife's iPhone and select her contacts.

ASSET CLASS for GL account

HI All,
Can you please help to find a ASSET CLASS for GL account?
I have GL account number, i need asset class of that gl account.
please reply.

Hi,
please see than transactions AO90, AO99 and AO87 or the corresponding tables T095, T095B and T095P.
There is no context from asset class to account.
Of course every asset class has a account determination.
You can see this in table ANKA or transaction OAOA. Ans with the account determination you can find the account in transactions AO90, AO99 and AO87 or the corresponding tables T095, T095B and T095P.
But the asset class is a kind of template.
regards Bernhard

Possible to add apps from two different itunes accounts?

So my family just purchased an iPad and I was wondering if it was possible to add apps from two different user accounts without paying for them twice? My dad synced it up with his computer so all the apps from his iphone were transfered. I noticed that in the app store for the ipad you can switch between different accounts. If I switched to my username would it allow me to add apps that I've already purchased through my iphone or will I have to pay twice?

Yes. My grandson did that to me and I had a heck of a time upgrading the apps he loaded because I didn't have his password. I ended up deleting them.

Asset class - GL

What is the meaning of Generate Asset Classes From GL
Accounts.
Kindly can any one tell me what is the meaning of this in
detail.
Thanks
Nag.

Hi
This is WIZARD and can do all settings here. Check the below notes available at nod.
Generate Asset Classes from G/L Accounts (1 to 1)
In this step you generate:
Asset classes
Account determinations
Screen layout rules
Number ranges for the assignment of the main asset number
These objects are generated in a 1 to 1 relationship to your asset balance sheet accounts. The system enters account determinations, screen layout rules and number ranges in the asset class as control parameters.
Note: Carrying out this step is not mandatory. Generating your asset classes from your G/L accounts is an optional step you can use to simplify the creation of asset classes. If you want to define asset classes without the help of your G/L accounts, use the step Define asset classes. You also use the "Define asset classes" step to copy asset classes. Copying classes is useful for adding to your asset classes, if you generated asset classes from your G/L accounts using the current step.
You define additional account determinations, screen layout controls and number ranges (if needed) in the section Organizational Structures.
Requirements
You must be able to enter all your asset balance sheet accounts.
Standard settings
SAP supplies example asset classes.
Note
This processing view has 7 navigation levels. The first navigation level is the overview screen containing the generating function. The next 6 navigation levels are detail screens for this overview screen. You have to work through all of the detail screens before you can start the generation of the asset classes in the first navigation level.
The first detail screen (account selection) has to be processed first. There is no hierarchy for the remaining detail screens (no detail screens for the prior navigation level). They are not dependent on each other. You can work through each of these screens independently from the other.
Activities
A Wizard guides you through the different navigation steps. Asset classes are not generated until you save.
1. Enter your chart of accounts and the chart of depreciation.
2. Select all G/L accounts that are APC balance sheet accounts.
3. The system prepared an account determination for each APC account, with a description that is the same as that of the given APC account.
Add to the account determination by entering the corresponding accumulated depreciation account for each account determination.
4. Enter accounts for expense, ordinary depreciation, and asset retirements for all account determinations.
In a later step, you can change these accounts for each account determination.
5. The system created a number range interval for each APC account.
Change the number range intervals as needed:
a) Change the limits of the number ranges.
b) Specify whether the assignment of the main asset number should be external or internal.
SAP recommends internal number assignment. You could define the number range intervals, for example, so that the first characters of the asset number agree with the first characters of the APC account number.
6. The system created a screen layout control for each APC account.
When the APC account has a number that is at most 5 characters long, the system automatically assigns the account number as the key for the screen layout control. If the account number has more than 5 characters, you have to enter the 5-character key for the screen layout control manually. Select the field groups that you want to be optional entries in the asset class.
7. The system created an asset class with the same name as each APC account.
Add to the asset classes:
a) Specify the type of the asset class (asset under construction, low value asset with or without collective management, no special class type).
b) Specify the default depreciation key and the default useful life for each depreciation area. You can add to this information for more depreciation areas in a later step.
Caution
You can use the function for generating asset classes more than once. The system uses the following logic when you do so:
First, the system checks whether the company code is already in production status. If it is, then the system creates, based on the G/L accounts you have selected, only asset classes, account determinations and so on that were not yet created. Any existing asset classes are not changed; nor are they deleted and created again.
If the company code is not yet in production, the system checks whether assets already exist for the existing asset classes. If not, the system deletes the existing asset classes and generates them again.
If assets do exist, the system checks if there are also transactions for the assets. If there are no transactions, you can decide which of the following you want to do:
Delete all asset classes and their assets, and generate them again
Only add new asset classes
If transactions exist for the assets, then you can only add new asset classes. In order to completely regenerate all asset classes, you first have to reset the company code (under "Production Startup").
When you choose the "New start" function, the system does not delete any Customizing objects that were already created (asset classes, and so on). This function simply resets the internal working table for this transaction. This means that after you reset, the transaction is returned to its original state (state the first time it was called).
Cheers
Srinivas

Cash as Asset Class

Hi,
Since Cash is a Current account, can we create a Asset Class for "Cash at Bank".
Thanks,
Aman

Cash is not an asset. So asset class cannot be created for the same.
You have to define normal GL account for Cash through FS00.
For posting transaction in petty cash, you have to set up cash journal using TCode FBCJC0 and create business transaction using TCode FBCJC2.
Post petty cash transaction using TCode FBCJ.

Smoothing and Asset Classes

Hi Friends,
My client wants Smoothing functionality (in transaction ocde oayr) for few asset classes and for few other remaining asset classes - no smoothing functionality is needed
How to achoeve this, please can any one explain
The smoothing functionality at present is done at company code level
Thank you & Kindest regards
Srikaanth

Any Suggestions please

Asset class does not show any results on the asset history sheet

I have an asset that was acquired on 31.03.10. When I run the asset history sheet for all asset classes, it shows up(under the acquisition column). However, when I run the Asset History Sheet for only that one asset class, there are no results.
Am I missing some config or is this a bug?
Fixed Assets addon. SBO 2007A SP0, PL48.
Financials >Fixed Assets > Asset History Sheet.
Enter Asset class and Date: March 2010.Click OK.
The report is empty.

The problem was the asset class name. The character ' is not allowed and was not recognized by the asset history sheet report.

Asset class while creating assets

Hi
I have a small question.
when I create assets with AS01, I can see other companies' classes....
(some companies' use the same chart of deprecation table ,some are not.)
Can I control that only let user see his company's assets class...?
Regards,

Hi,
you can make a authorization check for company code.
Asset class is a cross object.
regards Bernhard

New Asset Class Setting

Hello SAP Gurus,
I need to set a new asset class.
I've done following customization in SPRO:
- Financial Accounting / Asset Accounting / Organizational Structures / Asset Classes / Define Asset Classes
- Financial Accounting / Asset Accounting / Organizational Structures / Asset Classes / Specify Account Determination
- Financial Accounting / Asset Accounting (Lean Implementation) / Organizational Structures / Assign G/L Accounts
But still the new asset class is not listed e.g. in AS02 in asset class matchcode.
Please help.
Ondrej

Have u completed the Chart of Depreciation assignment exercise?If not, please carry out the same.
1) IMG->Financial Accounting->Asset Accounting->Organizational Structures->Assign Chart of Depreciation to Co. code.
2) IMG->Financial Accounting->Asset Accounting->Determine Depreciation Areas in the Asset Class.
Please let me know if still u r getting errors after doing these configurations.
Please reward points if u find this to be useful.
Thanks,
Prithwiraj.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Different GL Account for WRX for Separate Asset Class

Similar Messages

Maybe you are looking for