Different Groups with different rights possible on same Datasync1.2.4

Hi,
is it possible to configure datasync for one group syncing all mail and appointments and for an other group only syncing appointments?
Do I have to setup two datasync servers, or could this be solved by an additional connector?
Markus

sorry wrong forum

Similar Messages

  • Can we list all the users or groups with there rights on the universe\s

    Can we list all the users or groups with there rights on the universe\s using query builder.
    Can we do the same by using auditor reports.
    PLZ  help

    Thanks ,
    It can be acihived by using secuirty viewer.
    Thanks again

  • X groups with each 1 filter agaist same db, user member of more than 1 group

    Hi everybody !I have a problem :I have a set of groupsEach group is assigned 1 filter againstthe same databaseIt works fine, EXCEPT :When 1 user is member of more thanone group it fails with the##1054013 Syntax error loading filters - operation canceledall users have none-access to the dball filters are mutually exclusive,e.g. read a,read b etc.In businessterms : One employee can seeown data (read a)The manager can see own data (read b)BUT the manager can also see employeedata (read a)Group a filter read a against db xGroup b filter read b against db xEmployee is member of group a (No prob)Manager is member of group b (No prob)Manager is also member of group a (PROB!)Thanks in advance from DenmarkCarsten

    Hi everybody !I have a problem :I have a set of groupsEach group is assigned 1 filter againstthe same databaseIt works fine, EXCEPT :When 1 user is member of more thanone group it fails with the##1054013 Syntax error loading filters - operation canceledall users have none-access to the dball filters are mutually exclusive,e.g. read a,read b etc.In businessterms : One employee can seeown data (read a)The manager can see own data (read b)BUT the manager can also see employeedata (read a)Group a filter read a against db xGroup b filter read b against db xEmployee is member of group a (No prob)Manager is member of group b (No prob)Manager is also member of group a (PROB!)Thanks in advance from DenmarkCarsten

  • SP2010: Users with Contribute rights can Add but not edit items in Calendar View

    Hello,
    One of our users was recently trying to update a Calendar item in the Calendar view, but was unable to do so. Here are the facts of the case:
    - The members of the user's group have Contribute rights on the Calendar list, and on each of the specific Calendar items tested
    - I logged in as a member of the same group and am able to Add items in the calendar view, but when I click on an item title the Ribbon options (including Edit) are not available - whether I created the item or not
    - While logged in as a member of that group, I can edit calendar items using the Allitems view, using the dropdown menu and Edit Item (if I click on the item title, I get the item details without the Ribbon)
    - I created a new Calendar view ("Calendar2") but the problem was the same
    When logged in with admin rights, I get the Edit ribbon when I click on an item title from the Calendar view. Is there a way to do the same for non-admin users? Thanks. 

    Hi,
    According to your post, my understanding is that you were able to add items into a Calendar List, but you couldn’t edit some items of the Calendar List in Calendar View as a member of your group with Contribute rights. And if you edit the Calendar List’s
    items in the “All Events” view or log in with admin rights, you can edit these items.
    Therefore, I wonder if you use the “Calendar Overlays” to display some items of other Calendar Lists in the current Calendar List as John suggested.
    And if you don’t have permissions to edit items of other Calendar Lists, you can’t edit those items of other Calendar Lists in the current Calendar List in Calendar View.
    So, I recommend that you should check if using the “Calendar Overlays” to display some items of other Calendar Lists in the current Calendar List at first.
    If yes, you need to check if you have permissions to edit items of other Calendar Lists.
    For test, I suggest that you can create a new Calendar List and test to see how it works.
    Best Regards,
    Thanks
    Victoria Xia
    TechNet Community Support

  • OS group with write permission

    Installing on Linex need this...
    Enter the name of an operating system group that has write permission to the directory.
    How i can make group with the right permission on linex .
    Please forward me command to make OS group and giving it write permission.

    I am installting Linex OS , with 10g , Can you please guide me how i can create administrative group in OS for installing Oracle. For
    Loging onto you computer as a member of the administrative group that is authorized to install Oracle software and create and run the database.
    I want to install Linex & Oracle 10 g exactly like the link i am forwarding you
    http://www.oracle.com/technology/obe/2day_dba/install/install.htm#t1
    Can any body guide me how i can do that? I mean during Linex installtion how many directories i have to made with what permission. & what commands i can use for that.
    Arif

  • AP groups with same vlans , same ssid but different subnet.

    Hi Members,
    I have a Cisco Flex 7500 in my datacenter and I need to connect 100 sites , each site with 2-3 APs , each side has its own network and is independent of other sites , the site only need to comunity locally and do not need to access any centralized applications.
    I am trying to achieve this by Creating 100  different AP groups and assiging 2-3 AP in each groups for each branch, I will achieve WAN failover resiliency by creating flexconnect groug , the issue I am facing are as below .
    1.Since all the sites has same setup , the AP and clients on all sites are in vlan 2 , so when I try to create 2 or more AP group with same vlan, it restricts me of doing so , I cannot create diffrent AP groups mapped to same Vlan .
    2.If I keep the APs and Clients in the same subnet , I dont think it should be a problem , but I need your second opinion.
    to give you an even better picture , look at the topology enclosed , and my question is if both STAFF and STUDENT APs are in same vlan but in 2 different broadcast domain , how would I create the AP groups.
    Thank you

    Thanks for the reply Jenn , here is my situation.
    I have 2 sites lets day , site A in virginia ,  site B in Maryland.
    SiteA - 10.1.1.0/24 - vlan 2
               10.1.2.0/24 - vlan 3
               10.1.3.0/30 - WAN to central site where controller sits.
    SiteB - 10.2.1.0/24 - vlan 2
               10.2.2.0/24 - vlan 3
               10.2.3.0/30 - WAN to central site where controller sits.
    both the sites will have a single ssid "XYZ" and will switch locally only.
    howin my understanding the way I will deploy this is as below
    1.I will create WLAN with ssid "XYZ".
    2.I will create 2 AP groups lets say "Site-A" and "Site-B"
    3.I will map the APs in site A to AP group "Site-A" and APs in Site B to "Site-B"
    4.I will create 2 dynamic interfaces one for each AP group , now this is where I am facing problem , when I am creating dynamin interfaces , I need to specify the subnet and vlans when creating dynamic interfaces , since the vlans used is same on both sites , its not letting me create 2 interfaces with same vlan id.
    in my understanding HREAP is only majorly used for WAN failover and local authentication so I am not concerned about that right not , my prime work is to udnerstand the AP group and working.
    if you still need print shot let me know I will have to go at site.
    also validate if my thinking is right on the 4 steps I have mentioned above , I am new to wireless and whatever I have learned I have learned in last 10 days .
    Appreciate your help.
    Thank you

  • Is it possible to realize two different processes in the same time with TDMS?

    Hello all,
    we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
    Thanks in advance!!!
    Ilkin Mammadov

    Hello Anita,
    I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
    Thanks in advance!
    Best regards,
    Ilkin

  • Is it possible to face time with 3 different people at the same time?

    Is it possible to face time with 3 different people at the same time?

    Check out GoToMeeting http://tinyurl.com/k6q84kw
     Cheers, Tom

  • Monitoring servers in SCOM 2012 via different locals within the same management group

    Hi,
    I have 2 management servers in a same management group. The 1st one is having English (US) locale while other is installed on Swedish locale. Both are accessed by different users having same admin rights.
    Once a USER 1 try to register a server through authoring tab from 1st management server(installed on English locale), a profile/group wrt the server registered is created successfully but the USER on 2nd management server (installed on Swedish locale) can
    not see the same in Authoring tab. He can view it in Monitoring tab as as well as Administration tab.
    The Vice versa is also true.
    Does any one have idea that is it SCOM 2012's expected behaviour wrt 2 2 different users on 2 different locales within a same management group ?
    Thanks in advance.

    Hi,
    I am a little confused, what do you mean by "register a server through authoring tab"?
    Do you mean that when you discover a server on 1st MS with discovery wizard then you cannot see it on 2nd MS(and the vice versa)?
    As far as I know, all those information should be stored in the operation database which is shared to both MSs within the same management group.
    We may use SQL query to find the discovered server on the operation database. Please also check operation manager event logs to get more information to troubleshoot this issue.
    Regards,
    Yan Li
    Regards, Yan Li

  • Same user with administrative rights on all the servers in single domain versus domainadmin as a part of administrator group in all the servers

    same user with administrative rights on all the servers in single domain user as a part of administrator group in all the servers:
    same user is configured as administrator on all the servers in one domain at windows 2003 server. Should this user be made part of domain admin and then this can be set up in the group of administrator for all the servers.
    How this is technically different?
    If same user is set up as an administrator on all the servers in domain, will it have the same access on all the files as a domain admin user?
    dhomya

    If the account is not admin on the domaincontrollers and the account is not member of domain admins or any other privileged AD group, the account has only user privileges on AD and thus cannot perform actions like creating and managing  accounts,
    groups, OUs,policies, sites, ...in other words cannot potentially ruin Active Directory.
    I think that is a pretty big difference.
    In fact, it is bad practice to perform you daily server management with an AD privileged account.
    In regards of file access. The domain administrator will be just an admin, and thus has the privilies assigned to the local admin group, just as any other admin. But if it are different accounts they might be member of different groups assigning different
    privileges. Always be carefull when assuming resulting privileges will be the same.
    MCP/MCSA/MCTS/MCITP

  • How can I share the home folder with different accounts on the same mac?

    Hi, here's a question:
    How can I share the home folder with different accounts on the same mac?
    The whole point being not to have to install all my apps, and move all my files each time between users.
    The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
    I would like to have a pro and a private account on my mac.
    Thanks for you answers,
    Doug

    Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
    If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
    Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
    You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
    Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
    sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
    Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
    With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
    Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

  • Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi...
    The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Billing policy is the same for both the iTunes as well as Mac App Stores.

  • Unable to copy database with different name in the same instance

    I had a huge database and wanted to try some change optimization changes.
    So wanted to make a copy of the database along with data in the same instance.
    I have tried copy database wizard several times but always see the error as in attachment.
    Can someone let me know how to troubleshoot further?
    If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

    Hi Nandu,
    From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
    blog.
    1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
    2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
    3. Start SQL Server. At this point, the database is in suspect status.
    4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
    Use Master
    go
    sp_configure 'allow updates',1
    reconfigure with override
    go
    5. Change database mode to emergency mode.
    SELECT *
    FROM sysdatabases
    WHERE name = 'DatabaseName'
    BEGIN
    UPDATE sysdatabases
    SET status = 32768
    WHERE name = ' DatabaseName '
    COMMIT TRAN
    6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
    DBCC TRACEON (3604)
    DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
    GO
    7. Reset the database status using following command.
    sp_RESETSTATUS yourdatabasename
    GO
    8. Turn off the update to system tables of Master database running following script.
    USE MASTER
    GO
    sp_CONFIGURE 'allow updates',0
    RECONFIGURE WITH OVERRIDE
    GO
    9. Reset the database status to previous status.
    BEGIN
    UPDATE sysdatabases
    SET status = (value retrieved in first query of step 5)
    WHERE name = 'DatabaseName‘
    COMMIT TRAN
    GO
    Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
    Thanks,
    Lydia Zhang

  • Can CSS115XX have 2 service group with different upstream?

    Hi,
      Just to ask if CSS can support the architect that 2 service group with different upstream.
      It seems if I set a default route then I can have only one upstream routing path.
      Thanks.

    you can configure mulitple gateway/upstream.
    The CSS by default select the correct route....the one that corresponds to the inbound request.
    So, if request came in from upstream-A the response will be sent through that same upstream.
    This behavior can be modified with the following command :
    CSS11503-2(config)# ip ecmp ?
      address             Choose among alternate paths based on IP addresses
      no-prefer-ingress   Do not prefer the ingress port for the reverse path
                          egress
      roundrobin          Alternate between equal paths in a roundrobin fashion
    CSS11503-2(config)# ip ecmp
    Gilles.

  • Invoice posting with different currency for the same PO

    Hi,
    Can we post the the Invoice with different currencies for the same PO.
    For example.
    PO has Qty 100 pcs.  amount 100 USD
    GR   Qty 100 pcs.
    Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
    Any sugggestions pls.
    Thanks,
    Satya

    Hello
    As per my knowledge, that is not possible.
    And in whjat scenario, we need to do that?
    In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
    If you want, you can do MIRO in different currency that what is in PO.
    In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
    Hope this helps
    Regards

Maybe you are looking for