Different heading label based on the value!
i have IR report ...
sl no
street
Ph
notes
this label never
to show here!
dynamic label
(ASIA)
(EUROPE)
1
2 nd st
96541
notes 1
ASIA
INDIA
2
2nd st
65841
notes 2
EUROPE
UK
3
2nd
5648
note 3
EUROPE
GERMANY
i have condition when the user logged from region wise,the region value should goes to label in Dynamic label as HEADING! how its possible?
Thanx,
Ram.
Ramani_vadakadu wrote:
Yes i did the validation based on the LOV to affect &ITEM_LABEL ! how can use this validation in pre-validation? please login and do the sample one based on the value(real data means my 1st query in thread)!
https://apex.oracle.com/pls/apex/f?p=29288:1:9453626954797:::::
Wks:ram_r&d
user/password: aramani/apex
I have no idea what you mean. There is no validation involved. Not only did I never mention validation, you are claiming that you "did the validation", yet there is no validation on your page at all. I suspect that you are using the term "validation" in a very different way from its APEX-specific meaning.
The component that is required in this case is a page computation with a Before Header computation point.
Similar Messages
-
Count the number of rows based on the values!!!
Hi all,
What I am using:
I am working with a multidimensional database in Visual Studio 2010 using its Data source view and calculation member and dimension usage.
What I want to do:
I have a fact table that has five columns(leg(s),hand(s), Head and body,overall) that shows the category of how severe the injury is. Let say for the records all columns never have an empty value(no injury is stated with 'No injury' ) . These five columns
are connected with a dimension that has all the available values (Category A-E of injury).The overall has the most severe from the other four columns. I want to create a bar chart with five different measure
values, one for each column, and count the values in those columns.
For example : I have a slicer in the excel and a bar chart and the slicer has all the values of the Category of the injury ( Cat a,Cat B, Cat C, ... Cat E, No injury ) and when i select one of them, lets say
Cat C, the bar chart should update and show how many Cat C each measurement column has.
Example FACT table:
ID LEG HAND HEAD BODY OVERALL
1 No A No No A
2 No D C C C
3 E C D A A
4 E E B C B
So if i selected C the bar chart will count (Leg = 0, Hand = 1, Head = 1, body = 2 and Overall = 1).
Any ideas ?
Thanks for the help and the time :)Hi DBtheoN,
According to your description, you want to create a chart on excel worksheet to count the rows based on the value, right? If in this case, I am afraid this issue is related to Office forum, I am not the expert of Office, you can post the issue on the corresponding
forum.
However, this requirement can be done easily on SQL Server Reporting Services. You can using the expression below to count the rows.
=COUNT(IIF(Fields!LEG.Value=Parameters!TYPE.Value,1,NOTHING))
Regards,
Charlie Liao
TechNet Community Support -
Plot a chart dynamically based on the values selected
Hi All,
I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
Thanks in AdvanceHi,
Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
Thanks,
Sanjay -
Validating an attribute based on the value of another while inserting
Hi guys
I need to validate an attribute based on the value of another attribute.
Example:
inside some entity I have the following validation function
public boolean validateAtt1(Number data){
if (this.getAtt2() < some vlaue)
return false;
return true;
this function works fine when I'm updating a record, but when I'm inserting a new record the this.getAtt2 return null, now I don't want to override the validateEntity function I want to override the validate function for att1; so in other words is there a way to reach att2 in the validation function of att1 when I'm inserting a new record, because the this.getAtt2() returns null if I'm inserting a new record.Using attribute-level setter methods won't work because when the value of a particular attribute is being set, the values of the other attributes might not yet have been set. This explains for example why it does not work when inserting a new record. You therefore have to validate at entity level.
Rather than coding on the validateEntity() method you use a built-in Validator or Method Validator. When recording validators like this, you can provide a separate message for each business rule. If you also have the bundled exception mode enables (which will be the case by default for web applications), then multiple messages can be shown at the same time.
If you have one business rule involving two different attributes, for example a and b, and you must provide different messages based on if a is causing the violation or b, you can do it like this:
- implement one method doing the validation and that will indicate which attribute is causing the violation
- implement two different method validators (with two different messages) that call the method doing the actual validation and return false based on the attribute causing the violation
For more information about implementing business rules in ADF BC, you might have a look at this white paper:
http://www.oracle.com/technology/products/jdev/collateral/papers/10131/businessrulesinadfbctechnicalwp.pdf
Jan Kettenis -
How to Visible/Hide an Item based on the value of another Item
Hi
I need to visible and hide a textitem based on the value of another item.This form has 3 blocks, and the both item is in the first Master Block.
My code is:
if :RECORDTYPE=7 then
Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_TRUE);
Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_TRUE);
ELSE
Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_FALSE);
Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_FALSE);
:BLOCK.ITEM:=NULL;
end if;
I wrote the code in the Validate Trigger, but not working when moving Next Record & Previous Record
Thanks in advance
RizlyRead the 'Propagation of Property Changes' section towards the end of the page for Set_Item_Property in the online help. I'm not sure what you mean by locking automatically but perhaps it's because of this.
You should also ensure the item you're setting to invisible is not the current item (check :system.cursor_item and go to a different item if necessary). -
Change value of another field based on the value of selectOneRadio
Hello
I need to display one of two city fields based on the value of a radio group. If the value of the radio group is "Yes", then display the non mandatory city field, if the value is "No", then display mandatory city field. Please can someone help me? The code is below
<af:subform id="contactForm3" default="true">
<af:panelForm binding="#{processScope.backing_regDetails.contactPanel3}">
<af:selectOneRadio binding="#{processScope.backing_regDetails.radio1}"
labelAndAccessKey="#{MatrixResource['ContactDetails.inBoroughQuestion']}"
layout="horizontal"
valuePassThru="true"
required="true"
onchange="javascript.refresh;" >
<f:selectItems value="#{processScope.backing_regDetails.items}" />
</af:selectOneRadio>
<af:inputText onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value='0';"
labelAndAccessKey="#{MatrixCommon['Label.SAO']}"
binding="#{processScope.backing_regDetails.houseNameText}"
maximumLength="240"/>
<af:inputText required="true"
onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value=0;"
maximumLength="240"
label="#{MatrixCommon['Label.PAO']}"
binding="#{processScope.backing_regDetails.numberStreetText}"/>
<af:inputText onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value='0';"
maximumLength="240"
labelAndAccessKey="#{MatrixCommon['Label.District']}"
binding="#{processScope.backing_regDetails.districtText}"/>
<af:inputText maximumLength="60"
rendered="#{!backing_regDetails.radio1}"
onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value='0';"
labelAndAccessKey="#{MatrixCommon['Label.TownCity']}"
required="true"
binding="#{processScope.backing_regDetails.cityText}"/>
<af:inputText maximumLength="60"
rendered="#{backing_regDetails.radio1}"
onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value='0';"
labelAndAccessKey="#{MatrixCommon['Label.TownCity']}"
required="false"
binding="#{processScope.backing_regDetails.cityText}"/>
<af:inputText maximumLength="60"
onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value='0';"
labelAndAccessKey="#{MatrixCommon['Label.County']}"
binding="#{processScope.backing_regDetails.countyText}"/>
<af:inputText columns="7"
onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value=0;"
labelAndAccessKey="#{MatrixCommon['Label.Postcode']}"
binding="#{processScope.backing_regDetails.postcodeText}"/>
<af:selectOneChoice onchange="javascript:document.forms[0].elements['contactForm3:locationId'].value=0;"
binding="#{processScope.backing_regDetails.countrySelect}"
value="#{processScope.backing_regDetails.enteredAddress.countryId}"
labelAndAccessKey="#{MatrixCommon['Label.Country']}">
<f:selectItems value="#{backing_regComponents.countryChoiceList}"/>
</af:selectOneChoice>
<af:inputHidden value="#{processScope.backing_regDetails.enteredAddress.locationId}"
binding="#{processScope.backing_regDetails.locationIdHidden}"
id="locationId"/>
</af:panelForm>
</af:subform>Edited by: aademola on Nov 13, 2008 7:35 AM
Edited by: aademola on Nov 13, 2008 7:42 AMHi,
you should be able to apply this example to your 10.1.3 project
see 4.3.2 of http://download.oracle.com/docs/cd/E12839_01/web.1111/b31973/af_lifecycle.htm#CIAHCFJF
Frank -
How to send notifications to different user groups based on payload value
Hi Gurus,
I have a scenario in BPM where i have to send notifications to different user groups based on the payload value.
ex:
Payload sample:
<employees>
<emp1>
<state>TX</state>
</emp1>
<emp2>
<state>AZ</state>
</emp2>
</employees>
Requirement: I have to send notification through Humantask to users of TX and AZ as mentioned in payload.
Can you please help me out in achieving this in BPM?
Thanks,
Raju
Edited by: user0808 on Mar 1, 2013 12:58 PM
Edited by: user080811 on Mar 4, 2013 11:06 AM
Edited by: user080811 on Mar 4, 2013 11:07 AMHi Daniel,
thanks a lot for your quick response.
I went through your blog and tried implementing the same.
But in my case i have to send parallel notifications to both the states.
Please correct me if i am wrong, using if conditions in rules is allowing me to send to only one state.
I also tried the following approach
1) setting the organization units in bpm workspace
2) passing values using human task parametric roles
3) and looping the subprocess that has the humantask for the count of states.
I am able to loop the subprocess but i am not able to change the parametric role value for the next iteration of the subprocess.
Can you please help me in resolving this?
thanks,
Raju -
Multiple keyfigure from different planning area based on attribute value
Multiple keyfigure from different planning area based on the attribute value of Cost element charac.
I need to obtain the value of the attribute in a fox function. Let me explain it further.
Background :
Planning area -
Charac----
KF
area1 -
Payscale group--- Amount
Cost element------AmountVR
area2--Payscalegroup----KF1
KF2
KF3
Cost Element has an attribute "Type"
Value for attribute "Type" = 1,2,3
Based on the value of the attribute, the corresponding KF needs to be multiplied.
Logic :
If type = 1.
AmountVR = Amount * KF1.
elseif type = 2.
AmountVR = Amount * KF2.
elseif type = 3.
AmountVR = Amount * KF3.
endif.
The problem I'm facing is that I'm not able to read the data of attribute "Type". None of the below statement retrieve the value of the "Type".
TYPE = ATRV(Attribute,COSTELEMENT,CO_AREA)
or
TYPE = ATRV(Attribute,COSTELEMENT)
Could you please help me in reading from a time dependent compounding InfoObject?
Regards,
RaghuHi..
Thanx Bindu..
I have actual data for Month days..if i am craeting in same layout it is too large.
that's why i am creating two layouts.
below example for better undersatnding.
Actual:
D1 :D2: D3 :D4 : D5 :D6 : D7 : FULLACT (sume of C(1) sum of d1 to d7))
10 :8 :12 : 10 : 14 : 6 : 10 : 70
Plan:
D1EST : D2EST: D3EST :D4EST :D5EST: D6EST: D7EST: FULLEST (sum of d1 to d7)
10 :10 : 10 : 10 :10 : 10 : 10 : 70
How can i read FULLACT value and that value i have to distribute equally in planing layout and always FULLEST is equal to FULLACT.if not equal i have to throug error message hoe can i setup if you have sample code can you send it to me.
what is your idea....
Edited by: Eyda rose on Jun 4, 2008 4:59 PM -
Invoke different Summary Screen based on attribute value
Hi Experts,
I have a requirement to show different OPA landing summary page based on attribute value received from Siebel application. Is that possible?
For e.g.: Create 2 summary screen
Siebel field value opa_attr1 = A or B, if A I want to display summary screen 1 otherwise display summary screen 2.
Thanks,
VinayThanks you for your reply. The link is not what I want. My case is that I already have a map stored in Oracle database under obiee_navteq schema. I want to use OBIEE to display map by adding different image/icon at different cities based on the value of an attribute column. All the examples I can find is to use measure column as an condition, not by attribute column.
Thanks -
Is there an easy way to filter a 2-d array based on the values of two of the fields?
Is there an easy way to filter a 2-d array based on the values of one of the fields. In my attached VI the output array has the following format:
TimeStamp Ident Frame Type Bytes Data
10:57:07.621 3AD00016 CAN Data Frame 8 0000000000000000
10:57:07.622 3AD00017 CAN Data Frame 8 000005E000000000
10:57:07.624 3AD00018 CAN Data Frame 8 0000000003300000
10:57:07.625 2DC00000 CAN Data Frame 8 0000000000000000
10:57:07.626 3AD00019 CAN Data Frame 4 0000030000000000
I would like to delete any rows that do not have an "Ident" between the values of 3AD00000 and 3AD0001E. So for the above data the fourth row would be deleted. The only way I can see to do it is to form a 1-d array. Is there a better approach?
Thank you.
Solved!
Go to Solution.
Attachments:
CMM_SN_MULTI.vi 20 KBHi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG 25 KB -
Autopopulate data in listitem based on the value of data in other itemlist
Hi,
In my project there is requirement of populating the data in based on the value populated in other list item.
For ex in list box item we select value 'PE' then in second list box based value of PE should be populated.If we select other value for ex 'PA' then in second list other valu is populated.So how can we populate the data in second itemlist based on the value selected in the first listitemHello,
<p>In this article, you can find a dialog sample that does that (section : 2.4.2)</p>
Francois -
SSIS - Loop through files from a file path based on the value in the variable
Experts,
I have a requirement where I'll be loading multiple files in to a SQL server table and archive the files when loaded. However, the challenge is , the file path should be dynamic based on the value of a variable (say, @ProductName).
For example: If I am running the package for variable @ProductName="Product", the file path would be "\\....\Src\Product", in that case the ForEachLoop will loop through all the files in that folder, load them to the table and Archive
the files to the "\\....\Src\Product\Archive" folder.
Similarly, if the @ProductName="Product_NCP", the foreachloop container should loop through files in the "\\....\Src\Product_NCP" folder, load them to the table and archive them to the ""\\....\Src\Product_NCP\Archive"
folder.
Any suggestions? I should be able to run the package manually just by passing the "@Product" value, create Archive folder if it doesn't exist, load the data and archive the files.Yes
1. Have a variable inside SSIS to get folder path. Set path based on your rule using an expression
like
(@[User::ProductName] == "Product" ? "\\....\Src\Product" : (@[User::ProductName] == "Product_NCP" ? \\....\Src\Product_NCP:..))
similary archive
(@[User::ProductName] == "Product" ? "\\....\Src\Product\Archive" : (@[User::ProductName] == "Product_NCP" ? "\\....\Src\Product_NCP\Archive" :..))
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
F4 help based on the Value in other field
Hello
I have a requirement in which there are two fields say field1 and field 2 in an ALV grid (in which new data can be entered). The F4 help of field 2 should be based on the value the user enters on field1.I have checked out the BC_ALV* programs but there are no clear help .
I have tried setting the parameter id of the first field value and then get that parameter id on_f4 event of the second field.But where can i set the parameter id of the first field . on_f4 of first field does not have its value and there is no event after_f4 . There is a parameter e_afterf4 in data change event but to tirgger that there shud be some event right.
Moreover If at all i get the first field value , i can use FM F4_int_table_value_request to show the refined f4 in field 2 . But I am passing the a field symbol table in my grids set table for first display . what can i pass as parameters here to the FM F4_int_table_value_request?hello Kallu ,
gt_f4_wa-getbefore = 'X'. --->refreshing layout before F4
gt_f4_wa-chngeafter = 'X'--> refreshing layout after f4.
see the sample code of F4...no need to pass dynpro details.....
*---locals.
data: lt_return type table of ddshretval,
ls_return type ddshretval,
begin of lt_kostl occurs 0,
kokrs type kokrs,
datbi type datbi,
bukrs type bukrs,
prctr type prctr,
end of lt_kostl,
ls_f4 type lvc_s_modi.
field-symbols: <ls_wa> type any,
<t_f4> type lvc_t_modi.
*---get defalut values.
refresh lt_kostl.
select kokrs
kostl as prctr
datbi
bukrs
from csks
into corresponding fields of table lt_kostl
where kokrs eq g_kokrs
and datbi ge sy-datum
and bukrs eq yfit_00049-bukrs.
*---call fm to display int values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'YFIT_00050-PRCTR'
window_title = 'Profit Center list'
value_org = 'S'
display = space
tables
value_tab = lt_kostl
return_tab = lt_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
read table lt_return into ls_return
with key fieldname = 'F0004'.
if sy-subrc eq 0.
assign er_event_data->m_data->* to <t_f4>.
ls_f4-fieldname = e_fieldname.
ls_f4-row_id = es_row_no-row_id.
ls_f4-value = ls_return-fieldval.
ls_f4-error = space.
ls_f4-tabix = space.
ls_f4-style = space.
ls_f4-style2 = space.
ls_f4-style3 = space.
ls_f4-style4 = space.
append ls_f4 to <t_f4>.
endif.
endif.
er_event_data->m_event_handled = 'X'.
regards
Prabhu -
ADF Table cell color based on the value in that field
Dear All,
I want to create a table for our new application which contains a table used to represent the data in a chart format or matrix format,
and each cell of the table should be filled with a colour out of three colors, based on the value belongs to which range eg:(1-8 ->green, 9-20 - yellow etc),
I dont know how to implement this. Please help...
RanjithCheck this out.
How to highlight ADF table row based on column value?
-Arun -
Setting the Link Group Name in Deep Link based on the value of a column
Using Jdeveloper 11g, Jheadstart 11g
Is it possible to override the link group name in deep linking. For example can I conditionally set that field based on the value of the item.
Regards
Edited by: aliegeh on Jul 25, 2010 8:35 AM
Edited by: aliegeh on Jul 25, 2010 8:43 AMThanks for the suggestion.
Here is what I am trying to do:
I have a table with one visible column that has the following entries:
1. Create
2. Modify
3. Verify
4. Approve
5. View
If the user clicks on row 1 (Create) then the link group name should be "CreateEmployees" to create new employees
If the user clicks on row 3 (Verify) then the link group name should be "MaintainEmployees" for verification and so on.
(This is role based and each role will have access to one or more of the rows in the tabler)
It basically mimics a work-flow type of scenario.
I tried to modify the template and looked at the line:
action="$JHS.facesConfigGenerator.addItemGroupLinkTaskFlowCall((${JHS.Current.item})}" but got stuck there.
Is there a way to change "JSH.current.item" in the template to read the group link name from another column say by using #if statements.
One way I also tried was to introduce a column for each action such as CreateAction, VerifyAction etc which kind of agrees with your suggestion but the drawback is the need to modify the table if another task is required.
Regards
Edited by: aliegeh on Jul 25, 2010 8:36 AM
Edited by: aliegeh on Jul 25, 2010 8:42 AM
Maybe you are looking for
-
How can I unlink contacts in iOS 7 iPad2?
I have two contacts linked on my iPad2, with iOS 7, and I want to unlink them. How can I do this?
-
Podcast will not show in Safari???
I''m on an iMac dualcore... 1mb ram 10.4.8 OS Safari 2.0.4 ITunes 7.0.2 Quick time 7.1.3 This maybe should be posted in another forum but here I am. 8D I can't seem to get any podcast to work... all i ever get is the Q graphic. I can play m4v files i
-
Install and test of Adobe Air on Mac OS X did not go well
I downloaded and installed Adobe Air onto my Mac OS X 10.5.5 machine. I then downloaded about six different Adobe Air apps, and tried to start each one in the usual way (double clicking on them). The error message I got in each case is the following:
-
HT4914 Why do I have to pay $ to delete songs from iCloud?
So you're telling me I have to PAY $24.99 per month to DELETE songs from iCloud? That is the most ridiculous thing I've ever heard.
-
how can i download free music in ipad