Different Identity Root with different Masters in one sun IM system

Hi!
We have the problem that we have to administer identities which have completely different sources and attributes. (internal identities with sap hr as master, external identities for system a with sql db as master, external identities for system b with flat text file as master, ...)
has anybody an idea how we could implement this?
br
Martin

Hello,
there is a standard SAP solution: [Decentralized Warehouse Management (LE-IDW) |http://help.sap.com/saphelp_erp60_sp/helpdata/en/51/803c35975f0054e10000009b38f839/content.htm]
for your scenario.
Andrzej

Similar Messages

How can I use different calendars associated with different emails to see appointments separately?

I have 3 emails accounts on my Blackberry curve. I want to use different calendars for different type of reminders/appointments. How can I do that? In calendar I pressed menu key and then clicked on select calendar, choose one email address (email 1) then entered an alarm but now if I go to a different calendar associated with different email ( email 2), it also shows me that alarm which I entered in email 1 calendar. Thanks for help

Don't have LV handy to open the old code, but I did read through the thread you referenced. It sounds like the example configured 2 counters to create the variable-freq finite pulse train and configured a 3rd counter to count the # steps generated as verification. That 3rd counter would be a problem for you as there is no internal timing signal connection between your 2 USB devices. You would need to run a physical wire connection and change some of the config code to match. Alternately, you could just delete all the code associated with the 3rd counter for now because it isn't strictly necessary.
Further advice/questions: Are you planning on a pure sine wave of frequency such that you oscillate with both positive and negative velocity (example: varying from -1000 to +1000 Hz clockwise)? Or is there a nominal average frequency with a small sine wave superimposed (example: nominal of 1000 Hz clockwise, variation of +/- 50 Hz)?
I *think* you may be dealing with more of a continuous pulsetrain situation, which is actually much simpler. You would only need 1 counter/timer, though you would still perform the freq changes in a timed loop which uses the pulsetrain as its timing source. You'd just need to keep track of your total elapsed time so you could figure out the right sinusoidal freq value at the moment you're ready to update it.
Another subtlety to watch out for if you're oscillating about 0 velocity -- don't try to create a frequency that is lower than the rate at which you need to update. Also, with steppers you may have mechanical stability issues at low freqs like 10's to low 100's of Hz. These kinds of things may need to be managed as special cases which force you to deviate from a "pure" sine wave.
-Kevin P.

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

How to Generate 997 for different trading partner with different Interchang

How to Generate 997 for different trading partner with different InterchangIDS
We are planning to use same working “ABC -> XYZ (Host)” 850 “ecs” file even for “EFG -> XYZ (Host)” 850 Transaction. And we have successfully implemented without any issues.
We wanted to send 997 Acknowledgement in case of “EFG -> XYZ (Host)” 850 transaction.
In this case also we would like to use same “ecs” file which has been used for “XYZ (Host) -> ABC”.
After adding the 997 capabilities to Stanley I don’t see any extra capability added to “XYZ (Host)” trading partner.
The generated 997 for Stanely EDI file doesn’t reflect the “XYZ (Host)” trading partner Interchange ID. It is getting reflected the previous 997 Transaction “XYZ (Host)” Intercahnge ID.
We use following Interchange ID’s
ABC = 005381447
XYZ (Host) = 049894764
EFZ = SWEOT30013
XYZ (Host) = 5273851T
The 997 which is generated has the InterchangeID as this “049894764” instead of “5273851T”
Regards
Ravi

Hi Ravi,
You have to have the two Delivery Channels under Host TP's communication capability. One host delivery channel should be used with one TP only and will have specific values to that TP.
Go to the Exchange Protocol Parameters of Host TP (XYZ) delivery channel (which you are using in the agreement with EFZ) and provide the required values here. Revalidate and redeploy the agreements and run a test. Let us know if you still face issue.
Regards,
Anuj

Me and my wife have two different iTunes accounts with different music, how can we syncronice this to our Ipad?

Me and my wife have two different iTunes accounts with different music, how can we syncronice both our accounts to our Ipad?

I'd like to know the same thing...

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

Printing different/selective files with different copies

Hi everyone,
I've been working on finding a solution, on how to print different pdf files with different copies, without opening the pdf-files.
Task:
I have a folder, with 25 pdf files
I want to make a php overview, of the folder
At the end of each line/file - i would like to add a number for the copies
In the end, I would like to simply press print - and every document ive added a number/copies to - are being printet...
I guess I need to use PrintPDF - but does anyone know any pre-made program/function - that could handle the "copies" part...?
I hope someone can help me out,
Thanks
Jan

Well, i had hoped that the acrobat could open silent - eventhough they've removed that feature in the newer versions.
Even though the program would open - if the amount of copies was added - and i just hat to press print - it would ease the job alot.

Can i share live documents in pages between different apple devices with different owners

Can i share live documents in pages between different apple devices with different owners

iTunes: How to share music between different ... - Apple - Support

A second user called root with different UID after install

After installing Mavericks, I noticed that sudo didn't work properly. I investigated it for a while and then noticed that sudo was running as a user called 'root' but with different uid (217, not 0). Now, is it possible that Mavericks installation has created this second root user incorrectly? Or should I fear that my laptop was compromised before, attacker had somehow been able to create a second root user, and OS upgrade just exposed the problem.
I was able to circumvent the problem by renaming the second 'root' user with dscl, but I still would like to understand the root cause (pun intended) of the problem.

~/Library is probably the one you don't want to move back because it may bring the issues back along with it.
All your own data you can drag & drop. You can drag the contents of any folder Movies, Music, Pictures, Documents (or as much as you want).
Rather than try to replace the Library you can take ~/Library/Application Support, Mail, Safari and any other folders you need.
To access your hidden ~/Library folder go to your Finder "Go" menu hold the option key to choose "Library".
Then you can drag it to the Sidebar for easy access.

Identical pages with different names on website

Hi, I've recently put up a new website which completely
replaces the old one. I'm about to delete all the old pages off the
server, but I notice they're still coming up on google. Is it bad
practise to replace the old pages with my new ones, and leave two
copies of the page on the server but with different names? Eg, the
new page about restaurants and entertainment is called
"restaurants_entertainment.html" but the old page is just called
"restaurants.html". So I was thinking I could save my new page as
'restaurants.html' and put it onto the server as well, so that when
users click on the search results they get taken to the new
restaurant page and not the old one. I'm thinking this is not a
good thing to do? just wanting confirmation from the
experts...

It's best, whenever possible, to give your new pages the same
filename as
your old pages -- so that basically, you're just replacing
the content on
each page.
If that's not possible, you need to 301 redirect from the old
pages to the
new pages, e.g., redirect from restaurants.html to
restaurants_entertainment.html, so that when people click on
the "old page"
in Google, or from their bookmarks, or in a link on another
site, they will
end up at your new page.
Sonjay
On 11/9/08 7:44 PM, "just_carly" wrote:
> Hi, I've recently put up a new website which completely
replaces the old one.
> I'm about to delete all the old pages off the server,
but I notice they're
> still coming up on google. Is it bad practise to replace
the old pages with
> my
> new ones, and leave two copies of the page on the server
but with different
> names? Eg, the new page about restaurants and
entertainment is called
> "restaurants_entertainment.html" but the old page is
just called
> "restaurants.html". So I was thinking I could save my
new page as
> 'restaurants.html' and put it onto the server as well,
so that when users
> click
> on the search results they get taken to the new
restaurant page and not the
> old
> one. I'm thinking this is not a good thing to do? just
wanting confirmation
> from the experts...
>

How to get minimum of 3 identical records with different dates

Hi All,
Below is my query which gives me the data i want but it gives me a same claim number 3 times because those 3 records have HVAC in them but the comments date is different, So i would like to have one row returned with the min(commentdate).
SELECT C.hsclaimnumber,
COMMENTS.hsobjectid ,
COMMENTS.hsnote as Comment,
C.hsdatecreated,s.state_id,
l.hslosstype,
Comments.hsDateCreated AS CommentDate
FROM hs_comments AS COMMENTS
INNER JOIN
hs_claim AS C ON COMMENTS.hsobjectid = C.hsclaimid
inner join
qx_states s on s.pkey = c.hslosslocationstate
inner join
[dbo].[hs_loss_type] l on C.hslosstypeid = l.hslosstypeid
WHERE (COMMENTS.hsnote LIKE '%hvac%') and
year(c.hsdatecreated) in (2014) AND (l.hslosstype = 'All other physical damage' or l.hslosstype ='Lightning (no fire)' or l.hslosstype ='Water')
group by C.hsclaimnumber,
COMMENTS.hsobjectid ,
COMMENTS.hsnote ,
C.hsdatecreated,s.state_id,
l.hslosstype,
Comments.hsDateCreated
order by C.hsclaimnumber
Can someone please help me with this?
Thanks.

Select * from (SELECT C.hsclaimnumber,
COMMENTS.hsobjectid ,
COMMENTS.hsnote as Comment,
C.hsdatecreated,s.state_id,
l.hslosstype,
Comments.hsDateCreated AS CommentDate
,row_number() Over(partition by C.hsclaimnumber Order by Comments.hsDateCreated) rn
FROM hs_comments AS COMMENTS
INNER JOIN
hs_claim AS C ON COMMENTS.hsobjectid = C.hsclaimid
inner join
qx_states s on s.pkey = c.hslosslocationstate
inner join
[dbo].[hs_loss_type] l on C.hslosstypeid = l.hslosstypeid
WHERE (COMMENTS.hsnote LIKE '%hvac%') and
year(c.hsdatecreated) in (2014) AND (l.hslosstype = 'All other physical damage' or l.hslosstype ='Lightning (no fire)' or l.hslosstype ='Water')
group by C.hsclaimnumber,
COMMENTS.hsobjectid ,
COMMENTS.hsnote ,
C.hsdatecreated,s.state_id,
l.hslosstype,
Comments.hsDateCreated
) T
WHERE rn=1
order by C.hsclaimnumber

HT4061 3GS stuck on connect to iTunes screen and keep getting error 29 at restore tried 5 different batteries all with different apn numbers what apn should my batterie have

Keep getting error 29 I have tried 5 batteries now all with different apn numbers which is the correct batterie to use in my 3GS

Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service

Page Footer : utilisation different page footers with different dimension

In my document I use different page u2013footers sections, I know that CR takes as reserved space the minimum space of the greatest page-footer section, is there a possibility to have different page footer sections with different dimensions

hi,
"Clamp Page Footer" option can be used to remove extra space at the bottom of the report. This option can be used such that each page height varies.
Regards,
Vamsee

Different user options with different sets of questions

Is there a way I can have two different options and when the user clicks on option A a whole set of questions/form fields appear. Or if they select option B a whole different set of questions/form fields appear?
How would I go about programming something like that?
Hopefully I was clear enough. Thanks so much! :)

Hi Arnold,
SAP Logon Tickets issued by the Portal contain two user ids, basically one for Java Systems and one for ABAP systems. See also note 843061 for details.
You do not need passwords for the reference system, if the user mapping is maintained by the user administrator, and the UM property ume.usermapping
.admin.pwdprotection is set to false, see http://help.sap.com/saphelp_nw04/helpdata/en/fe/d22a41b108f523e10000000a155106/frameset.htm. If you set the mapped user id programmatically, or if you retrieve it from an LDAP server, you also do not need to verify the ABAP password of the user (see https://media.sdn.sap.com/javadocs/NW04/SP12/ume/index.html and http://help.sap.com/saphelp_nw04/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm).
Best regards,
Joerg

Problem storing two identical qualifications with different proficiencies

Hi Experts,
I am trying to store qualifications in infotype 0024 (although the actual data ends up in HRP1001). My issue is that if an employee holds two identical qualifications (ex. CPR) with two proficiencies (ex. basic and advanced), the system will not let me store both of them. It either forces the earlier one's date to be delimited, thus making it no longer valid, or if the date range for the qualifications are the same, deletes the earlier one entirely and just saves the new one.
I know that this is because the key is duplicated in HRP1001. BUT, HRP1001 also contains a SEQNR field that should handle this, but I cannot get it to work? Is there a way to activate HRP1001-SEQNR?
I have tried playing with the time constraints. I assume that '3' is the one to use, but I still can't get all of the qualifications to save.
Any ideas??
Thanks in advance!
Shane LaBonte

Hi Roman,
I want to use the Qualifications infotype because we need the data in e-recruitment as well.
I used CPR as a broad example. I am in the K-12 Education sector. A real-life example would be an employee that holds the qualification: Intermediate & Senior. The proficiency of this qualification could be: Music. Another could be: Law.
There is a college that all teachers must register through to get their qualifications recognized. We are at their mercy in terms of how a qualification is defined. And because of the sheer number of qualifications that could exist (we're talking upwards of 1000), we DO NOT want to get into any sort of mappings between a qualification coming from the college converted into a different qualification recorded at our end.
Any ideas? I know this problem is quite unique.
Thanks
Shane

Different Identity Root with different Masters in one sun IM system

Similar Messages

Maybe you are looking for