Different in viewing the query in query designer and bex analyzer in BW Prd

hello...i transported the query from bw dev into bw prod successfully. when i view the query using query designer in prod, the query is the same copy of query in bw dev and QA but when i view the same query under the bex analyzer in prod, the query is not the same.
the correct query should be able to see 3 mandatory variable input but when i view it under the bex analyzer, only 1 mandatory variable can be seen here. Whereas when i view it under query designer, i can see the 3 mandatory variable being define there. And this query is assigned in one of the role as well.
any idea on this? thanks!!!

i checked in rsrt in sap, the personalization of the variable is not in yellow color, i can see the 3 variable in bex analyzer but the other 2 variable which is a mandatory field input for that query appear as optional variable input instead of the mandatory field input...

Similar Messages

Bex Query Designer and Bex Analyzer not working

Hi All,
While Login to Bex Analyzer, It is giving an error "An error occured while communicating with the BI Server"
While Login to Bex Query Designer, It is giving an error "Login Aborted".
Please help me to resolve this issue
Thanks
Irshad

Hello Irshad
Not sure if it helps but can try suggestion mentioned in this note.
https://service.sap.com/sap/support/notes/1434630
If problem persists you can upgrade your SAP GUI Patch level.
Still facing problem, please contact SAP .
Regards
Anindya

Cell definition in Query Design within Bex Analyzer

Hello,
I would like to use special cell definition to visualizing the difference row definition between 2 columns (last year and actual year). With "Cell Definition" function in Query Design within Bex Analyzer there's a option to select a new restricted key figure for a related cell. But as a result I just can see a star (*) against a result number in that field. Do you have an idea, how can I solve this problem?
Thanks and Regards,
Nuran

Hi again Dirk,
there's not a unit problem. We use 2 different restricted key figure definition for a same row. The first restricted (or can be decribed as calculated key figure) key figure must be used in the first column to represent the value of the last year. And at the same row with usage of same text (for example: cost of goods sold)the second restricted key figure should be used to show the value of actual year (B2:costs in euro). The problem is the key figure definitions are totaly different; they're using different account groups etc. Cause of, I wanted to use cell definition function. In the first value field (B1) should be shown first key figure but I just get star (*) and a wrong value in the formula field of excel (between the toolbars and the result area).
Thanks for your reply.
Nuran

Currency conversion in the query designer level

Hi
Iam calculating the 'Financial Loss' in the Formula in the query designer.And it comes in SAR(Saudi Riyals).
But i want the 'Financial Loss' in USD in the Query Designer. Because i want the USD Financial Loss to be use in some other calculation.
Please let me know how can we do this one in the query designer. I really appreciate for it .
Regards
Kumar

Dear Ravi,
Basically there are 2 ways to do it: routine & query level.
If query level, you need to maintain it first using tcode RRC1, then you use it in your KF in your query. .
Routine level,
You can create new KF in info-provider, then in the update rules routine, you can use this function to convert the currency :
CONVERT_TO_LOCAL_CURRENCY
Hopefully it can help you a lot.
Regards,
Niel
thanks for any points you choose to assign.

How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

Table View in Query Designer is not avaliable

Hi Guru:
The "table view" in the menu item "View" is grey in the query designer.
I have only 1 structure ( key figure structure ) in my query.
How to change it to the "Table View" mode then?
Thanks.
Eric

Hi
Please create another structure in your query. Once you have 2 structures then only table view will be enabled.
Regards
Pradip

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Providing access to Variables in the Query Designer

Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!

Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

'Display as hierarchy' in the Query Designer

Hi,
Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
Thanks,
Anjali.

Hi Anjali,
display as Hierarchies:
simply enables you to select and use hierarchies for that InfoObject if available.
Structures:
you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
Hope that helped,
regards,
michael

Creating formula in the Query Designer

Hi,
I have a KF which I have to convert in to different unit in the query ( x/data)
The problem is some of my data in the cube is zero (0) and when I use division, it shows me error (red X) in the query output.( Divide by zero)
Is there any way to skip this division if the data is zero? How can I set my formula in the Query designer?
Thanks
M Kumar.

Hi,
Please use the NDIV() or NOERR() function outside of your expression and it will take care of the division by zero.
See here for details:
http://help.sap.com/saphelp_nw04/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
Hope this helps...

Views in query designer

Hi,
can you please tell .
In the tcode:RSRT1 we have View What does it mean?
Can we create views in query designer?
Can we use the dictionary views in query designer?
Can you please tell about?
Regards
Naresh

Hi Naresh.
RSRT1 is used to view the output of queries as well as views.
This is the reason why you see the option to input view.
the difference between RSRT and RSRT1 is as follows
rsrt allows only queries to be executed and provides output in List as well as HTML format
rsrt1 allows you to execute views as well as queries and in HTML format.
hope this helps,
Sri...

RFCs for the Query Designer

Hello experts,
does anyone know the RFCs which the Query Designer use? (NW04s SP10)
Thanks in advance for your help.
Best Regards,
Marcel

Hi Edwin,
I tried to use this function modules, but it seems that they have bugs, also the transaction rscz, because I copied a query and the copy is different to the original query.
Any suggestions for RFCs for adding characteristics to row, columns and so on?
Thanks in advance!
Best Regards,
Marcel

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

G/L Account Numbers missing in the Query Designer

Hi Experts
New G/L Account numbers are been added to some items like Rebates & Discounts. These G/L Account Numbers are been seen in the RSA1 and are not present in the Query Designer. So i want to know the procedure to update these G/L Account numbers in the Query Designer, Can you please help me.
G/L Account Numbers in RSA1 = 718 and in Query Designer it is 661 so please guide me to update the rest of the G/L Account nos in the query designer.
Thanking you
Regards
Mrudul.
Edited by: Mrudul Naidu Cherukupalli on Feb 1, 2008 5:23 PM

Yes, the problem is with the extractor
It is not been enhanced because i am working on SAP BW 3.1C and its been implemented in 2004 and since then it is not been used properly.
The Datasource is 0EC_PCA_3 (Enterprice Controlling line items).
Yes i maximized to 1000 records per call and searched for the G/L Account E16411 which i cannot find in the cube.
When i checked the results with R/3 i found the totals are doubled and when divided the Key figure Net of Credit and Debit by 2 i got the some results correctly(Sales Revenue, Sales Revenue of Exports and Sales Revenue of Domestic)
I Checked the Service Marketplace and found the note which should be implemented to rectify the error of duplicating the records,
Can you please help me to update the G/L Accounts in the datasource.
My Development System contains more then 2000 G/L accounts in the cube (query designer).
Thanking you,
Regards
Mrudul.

Multiprovder objects missing in the Query Designer

Hi,
I have multiprovider based on 2 infosets ( as the reproting is based on master data) .
Later on i have added couple of objects in master data and adjusted the infoset and activated it . The multiprovider also ajusted after adding the fields.
I have activated the multiprovider which is successfully activated, but when i login to Query designer and try to create a query the news objects are missing from the query desinger where as in RSA1 for the Multiprovider it is displayed.. Kindly can anyone will help to resolve this.
Thanks

Hi Sathish,
Thanks for the response..
I have cehck the infoset invidually , the data dispalyed in both the infosets are according to my requreiment.
When i was checking the multiprovider i did not get the fileds which i have added in the multiprovider , i went back to the structure to cross check, if found this difference for all the ojects when you right click it will display assign identification filed where as for the added obejct it is displaying Change RUN id option.. why this is happening...
This is happen in test server after transprotation where as in dev it is fine and executing properly
Thanks
Edited by: Sony Kapse on Mar 1, 2009 12:45 PM

Different in viewing the query in query designer and bex analyzer in BW Prd

Similar Messages

Maybe you are looking for