Different labels in Numbers '09

Hello everybody,
Ok, I have a pop-up menu in cell A1
Cell B1 has a slider bar
Cell C1 has the result of the slider bar
I would like the label after the number in cell C1 to change depending on which choice made in cell A1.
For example, if the pop-up menu in cell A1 has snakes, dogs, and frogs. I would like C1 to say either 10 reptiles, 10 mammals, or 10 amphibians.
Is this possible? or do I need to make cell D1 have the different lablels?

You can do this with a lookup table.
=B&" "&LOOKUP(A,My Lookup Table :: A,My Lookup Table :: B)&IF(B>1, "s","")
The lookup table will have the items from your popup in column A and their classification in column B.

Similar Messages

  • ZFS Configuration - getting different disk target numbers

    Hi ,
    We are in the process of configuring Oracle 11gR2 RAC, we are using ZFS as ISCSI storage. getting different disk target numbers on both machines. ( disk 4,5 and 6). to configure ASM we need to set the them unique, please help us to reset volume names.
    i.e.
    4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
    Disable ISCSI Multipathing on dev2 and dev3:
    cat /kernel/drv/iscsi.conf
    set mpxio-disable="yes"
    [root@dev3 /]$ format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
           0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
           1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
           2. c1t2d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
           3. c1t3d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
           4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
              /iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0
           5. c2t26d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
              /iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
           6. c2t27d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
              /iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
    [root@dev4 /]$ format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
           0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
           1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
           2. c1t2d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
           3. c1t3d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
              /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
           4. c2t23d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
              /iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
           5. c2t24d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
              /iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
           6. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
              /iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0Regards,
    Sachin

    I have no room for the ZFS partition on a slice. I
    have a lot of free space unallocated to any partition
    and this is where I would like the ZFS partition.You would need to allocate it to one yourself.
    I
    saw a lot of confusion between slices and
    partitions.Yes. In many cases they are used interchangably.
    However, I often try to use the term "slice" for the solaris label subdivision, leaving "partition" to refer to x86 architecture-specific divisions.
    Solaris on x86 can only (easily) use a single x86 partition of type "Solaris". You can't use another partition (whether with ZFS or not).
    In my case, I have a 20GB partition where I have 10
    slices created when I installed Solaris on UFS.
    The 120GB left is not allocated to any slice.If it's visible to the Solaris label, then allocate it to a slice.
    Darren

  • How can I print address labels from numbers spread sheet

    How can I print address labels from numbers spread sheet

    CAB,
    The 5163 template has the following dimensional specs:
    Dimensions & Info
    Length: 4.00000"          Height: 2.00000"
    Top Margin: 0.50000"          Bottom Margin: 0.50000"
    Left Margin: 0.18000"          Right Margin: 0.18000"
    Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
    Intended Use: Mailing Labels, Shipping Labels, Address Labels
    There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
    You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
    I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
    So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
    Jerry

  • How to set up an address book and make labels with numbers or pages?

    How do you set up an address book and make labels with numbers or pages?

    Create an Apple ID - My Apple ID

  • Different labels for a textview based on component usage

    Hi,
    We are on SAP E-Recruiting EHP5 and we have a requirement wherein the label of a textview in a view needs to be dynamicaly controlled. The candidates personal data page (view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI) gets displayed both:
    1) When the candidate is signing up on the portal to create his profile
    2) On the application page while the candidate is applying against a particular position
    Now case 1 is a straightforward one. I set the label to a OTR and it just works fine. Case 2 is where the problem occurs. When the candidate applies against a particular position the standard SAP roadmap comes up with the view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI as its 1st step. So now how can I set a different label for the textview in this particular case coz the navigation happens dynamically through prepare_dynamic_navigation( ). Appreciate your inputs on this one.
    Regards,
    Uday
    Edited by: Uday Mr on Feb 29, 2012 3:36 PM

    Hi Uday,
    Please try to create it dynamically.
    Example:
    METHOD wddomodifyview.
    *-Data declaration
      DATA: root        TYPE REF TO cl_wd_uielement_container,
            page_header TYPE REF TO cl_wd_page_header.
    *-Get reference to Root UI Element Container
      root ?= view->get_element('ROOTUIELEMENTCONTAINER').
    *-Creating page header
      page_header = cl_wd_page_header=>new_page_header( title = 'Page Header' ).
      cl_wd_flow_data=>new_flow_data( element = page_header ).
    *-Add new page header to ROOT Element Container
      root->add_child( page_header ).
    ENDMETHOD.

  • How to set different font for numbers in headings and TOCs

    Hi,
    I've noticed some people use a different font for numbers in headings and TOCs to get some extra magic. Is there any way to automate such use of fonts in the paragraph styles?
    Oh, and any suggestions on what fonts would be good for numbers?
    Thanks!

    I was merely continuing on the original theme -- any digit in any character style. It was only later revealed that (a) the OP needed old style figures, and (b) those were available in his font from the start.
    The negative lookahead is the answer to his question (copied in full now)
    Based on the above InDesignSecrets tutorial, does anyone know what to do if some of the numbers end with a dot or a comma?
    Like the Norwegian date format: 13. mai 2009
    Or the Norwegian way of pricing items: 2900,-
    and my example shows it can be done, but with an added caveat. If digits are to be set in red, using the exceptions the OP asks for, my example sentence will come out as
    "Think of a number between 1 to 10, but don't use 9."
    rather than the (here) intended
    "Think of a number between 1 to 10, but don't use 9."

  • Whether in territory and org mgt is possible to create different labels?

    hi,
    Whether in territory and org mgt is possible to create different labels?
    regards,
    babu

    Hi,
      Org management is master data and Terriotor management is master data. Both are different and stored in different tables.
    COMM_TERRITORY is the master table for territory.
    Org mangement
    HRP1000
    HRP1001
    HRP5550
    Regards
    Srinu

  • How do I use values form different documents on numbers?

    I have two problems:  When I open an Excel worksheet that has references to other spreadsheets, Numbers automatically turns these cells into formulas with the wrong reference, giving therefore the wrong values.  How do I prevent or change this?
    I also do not know how to use data from different documents on a spreadsheet

    As it seems that you didn't understood, I repeat :
    there is no built-in feature allowing us to exchange datas between two different documents.
    So, what you get when you import an Excel document embedding external links is the designed behavior.
    Here you are speaking to end users like you. We can't change the app behaviour.
    If you need to work with linked XL documents, Numbers is not the good tool.
    Download and use the free LibreOffice.
    Yvan KOENIG (VALLAURIS, France)  jeudi 8 décembre 2011 09:34:23
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Open a Document with different versions of Numbers on different devices?

    Hello!
    I'm a beginner with Numbers application.
    I work with Numbers 3.1 version on my Mac, and Numbers 1.7.3 version on my IPad.
    Documents created on my Mac is shared via Iclous, but cannot be opened on my Ipad.
    What can i do?
    Thanks for your help!

    Hi meludwig,
    Unfortunately, LabVIEW keeps track of the different VIs in memory using the VI's name. Therefore, if you want to load multiple executables that use the same VIs but with different code, you will want to rename those VIs. LabVIEW cannot distinguish between 2 VIs with the same name but with different code. Dynamically calling the VIs using VI Server, like you mentioned, will also potentially cause problems because the executables might try to load same VI name into LabVIEW memory at a time and this will still causes problems.
    My suggestion would therefore to be to rename the utility VIs to another name and save it as a custom subVI in that program. Then, make sure to include that custom subVI in the App Builder executable and you should b
    e golden.
    Kileen C.
    NI

  • Updated to Yosemite, iMessage fusing different people and numbers to same conversation

    I recently updated to Yosemite and my iMessages is getting some contacts mixed up. For example, I had previously used iMessage to communicate with my dad who has an iphone and imessage. Now with Yosemite my mom who uses SMS with a different number as my father, is added to the conversation with my dad. It makes no sense and two different numbers are used in the same thread, I have no idea who I message from my computer. On my phone all is normal.

    Hi,
    Do you have an Address card in the Contacts app that has both sets of info on it ?
    DO they share and Apple ID ?
    You may find that the name in the "To" spot has to be used like a drop down to select the "right" number.
    8:17 pm      Friday; April 10, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How can I insert reference to cell on a different sheet in Numbers beta?

    In Excel or Numbers for iPad, I start typing in a cell, switch to another sheet and click a cell or range, hit enter, and I'm back on the original sheet with the cell reference inserted.  I saw documentation that it works the same way in Numbers Beta on Mac, but it doesn't.  When I leave the sheet, I'm not editing the cell anymore.
    Very frustrating.   This function is often necessary, and long formulas are tedious on iPad.  So far the most reliable method is to export back to Excel, make the change, and re-export to iCloud.

    I struggled with this same issue until this week.  You have to actually type references in cell.  And spacing is the key to making it work.  Make sure to put a space before and after each double colon.
    =SheetName :: B3
    =08 20 14 :: B3
    I you are linking to a different table in a sheet, you have to include the table name also.
    =08 20 14 :: No Shows :: D5

  • HT5824 Can use you use the same icloud & itunes account with 2 different cell phone numbers?

    Can I use the same icloud & itunes account with 2 different cell phones that have 2 different numbers?

    Yes. Two iDevices can share the same iTunes Library as long as both are configured to use the same Apple ID.

  • Different serial/model numbers in firmware than on actually device

    Hello,
    This issue has me perplexed. I bought a iPod touch 5th gen and recently needed to get the digitizer fixed. I got my iPod back and can't get it recognized on pc partially (meaning I can plug it in and it charges slowly but thats all it does). Upon further investigation, I noticed that the serial and model number displayed in my iPod settings are completely different from the ones noted on the back of my iPod touch. It also is different from the one that is stored in my iTunes account for recognized products that I own. I am at my wits end on this and appreciate any guidance that could be offered on this issue.

    The repairs were done through the extra warranty that I purchased. So I am not really sure where it was shipped to, all I know is that the claim was made through Asurion. However, after proper uninstalling and reinstalling of iTunes, the iPod is now operating normal. I am now trying to figure out why the serial and model numbers differ in Settings from what is printed on the back of the device. But for all intensive purposes, the device recognition issue has been fixed. I was trying to login yesterday to reply, but I guess the forums were under routine maintenance. Thank you for the reply.

  • Creating Cells with differing heights in Numbers '09

    In any given Row is it possible to have different cells with different heights because I've found that if I set the cell height to be e.g. 1cm then all the cells in the whole row are 1cm which isn't always the desired effect.
    Thanks

    S,
    A Row is a unit with a singular height value. All cells in that row will have the same height in a Numbers Table. Adjacent rows can be made to appear to have cells with differing heights by manipulating the Cell Border characteristics. You also have the option to combine individual tables in such a way that they appear to be a single table with different row heights.
    Jerry

  • Using period labels as numbers

    Sorry about the subject description I was trying to explain exactely what I'm hoping to be able to achieve
    I would like to be able to have the function in a report created in Oracle Hyperion Finacial Reporting Studio 11.1.2 that reacts in a certain way if the period is Jan but slightly differently if the period is Feb, the end part of my formual ideally would be (Cur Period Number * 12).
    Does anyone know if this is possible within the Reporting Studio?
    Any help would be much appreciated
    Thanks,
    JQ

    Hi JQ,
    Could you elaborate a little on what you are trying to achieve in your report? From a high-level understanding of your issue, I'm thinking that maybe you could structure the report to pull in the periods into separate columns and then use a hard-coded period number to use in your calculation for each month.
    MR
    Edit: I was incorrect in stating that you could use the hard-coded numbers (e.g. text cells) in your calcs. The way I got around this was to set up a statistical account with the month numbers and pulling the account into the report for calculations. I was only able to use the hard-coded numbers in conditional formatting. Sorry, it's been a while since I created the report!
    Edited by: MR on Apr 2, 2013 6:26 AM

Maybe you are looking for