Different languages are not available for Web Dynpro ABAP (WDA)

Hi Experts,
We are using Web Dynpro ABAP in 2 different languages (English/Spanish). Production environment only is available for English (WDA).
How can I make Spanish language available for Web Dynpro ABAP??. Is there any configuration or installation which I am missing?? Development and QA are OK (English/Spanish)
Thank you.
Regards
David Cortés.

Hi Experts,
Any help???
Regards
David Corté

Similar Messages

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

Ibooks top sellers & other books are not available for us to purchase in India.

Top seeling ibooks & other books within the ibooks store are not available for purchase in India except for some free classics.
When will the topselleing books within ibooks store be available for us to purchase?

No-one knows. It depends on when Apple decide to open an iBookstore for India.
In the mean time, you could create an Apple ID in the US store without a credit card and use iTunes gift cards to buy things. Gift cards are available on eBay. (I have never done this, but heard a number of reports from people who have and were happy with this approach.)
Michi.

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

HT203167 My movies will not download to my iPad. And I the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

My movies will not download to my iPad. And the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

Hi,
For all people struggling with connecting their iPad to their router, constantly getting 'Incorrect Password' even though you have entered the correct one - this may be your solution as it just resolved my issue.
In your router settings online (usually found at 198.168.1.1) change your security from WPA2 or WEP to WPA. For my iPad it for some reason only accepts WPA but now it is running without problems. Let me know if this helps.
Cheers.

Want documents for   Web Dynpro ABAP

Hi All ,
Can anyone please send me the Docs or link for   Web Dynpro ABAP .
Thanks in advance
Rahul

Hi Rahul,
   Welcome to the interesting world of Web Dynpro ABAP !
For Web dynpro ABAP you will require SAP ECC 6.0 onwards and WAS 7.0
is a must. It has very good future propspects as this is best UI technology.
In web dynpro ABAP we follow MVC(Model View Controller) architecture.
In this object oriented ABAP is used to provide background functionality. Here, your ABAP skills can be utilized to the fullest. Programming in web dynpro ABAP is different than conventional ABAP programming. Here we strictly follow MVC architecture in terms of controller interface. Also there are many wizards available so that we can directly pick the code from wizards.
e.g We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
Have a look at the following SDN WDA Wiki . There you can find all relevant information.
https://wiki.sdn.sap.com/wiki/display/WDABAP/Main
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Also you can search weblogs on web dynpro ABAP.
Hope this will help you.
Cheers,
Darshna.

Want docs for Web Dynpro ABAP

Hi All ,
Can anyone please send me the Docs or link for Web Dynpro ABAP .
Thanks in advance
Rahul

Hi,
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Also, I have the official Web Dynpro for ABAP documentation. Please let me know if I should send it to you.
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
? The use of declarative and graphical tools significantly reduces the implementation
effort
? Web Dynpro supports a structured design process
? Strict separation between layout and business data
? Reuse and better maintainability by using components
? The layout and navigation is easily changed using the Web Dynpro tools
? Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
? Automatic data transport using data binding
? Automatic input check
? Automatic operation of the Web Dynpro application using the keyboard
? User interface accessibility is supported
? Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
? Clear separation of business logic and display logic
? Uniform metamodel for all types of user interfaces
? Execution on a number of client platforms.
? Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
? Data flow between the front end and back end
? Layout of the user interface
? Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
? An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
? An interface for calling Web services
? A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
? The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
? The view is responsible for the representation of the data in the browser.
? The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Reward points if useful
Regards
Anji

Coding standards for Web dynpro ABAP

Hello all,
Can anybody please help me by providing the code review checklist for Web dynpro ABAP?
Thanks and Regards,
Rohini Shankar

Hello friend,
WebDynpro     *
1     Do not implement Data intensive operations in UI layer
2     Avoid database selects in the WebDynpro code.Use the corresponding BAPIs ,Methods
3     Are ABAP OO Classes like Assistance class are being used for application coding ?
4     Are Windows/Views only used for the sole purpose of hosting views and context?
5     Are a reasonable number of views put in a single WD Component instead of creating multiple WD Components ?
6     Unneccessary usage of dynamic programming and dynamic component avoided
7     Are singleton nodes used in case of nesting in the context ?
8     Is deep nesting of containers, Groups and Tabstrips avoided ?
9     Is the UI element TreeByKey or TreeByTableNestingColumn used instead of the Tree UI element ?
10     Is the checkbox "Accessibility Checks Active" ticked in the WD Component properties
11     Are the WD Component Instances deleted when no longer needed (IF_WD_COMPONENT_USAGE=>DELETE_COMPONENT)
12     Are the OTR texts defined for all the labels, texts(where ever appropriate) in properties of all the UI elements
13     Has the Generation limit been checked for all the components developed
14     Sufficients commets are written at the beginning of every major block to explain the processing logic.
*Error Handling     *
1     Is SY-SUBRC checked after CALL function modules
2     Use Assertions if you face unexpected errors which usually never ever occur!
Extended Check and Clean Up
1     Have following been removed :
     ·      Unused variables
     ·      Unused text elements
     ·      Unused tables from TABLES statement
     ·      Commented out parts of the code
     ·      Code segments which do nothing
2     Is extended program check completed and all errors/warnings removed
These are the things which i used for my project.
Thanks,
Sri Hari

Adobe Flash Islands for Web Dynpro ABAP Data Binding problem

I have downloaded the NetWeaver 7.1 Trial (includes Adobe Flash Islands for Web Dynpro ABAP). I try to create a very simple FlashIslands component running within the Web Dynpro Application, everything looks good. However, all binding to the Flex component is not working. Does anyone know why?
Since it's trial version, I login as BCUSER into NSP system. When I load up the build-in sample, such as Chart Demo, the binding to Flex seems working. I suspect if it has anything to do with package? I could only create my Web Dynpro under the $TMP package, as all the build-in sample are defined in SWDP_DEMO.
Please help.
Alan

hi,
Check out this link. It will give you an idea how to integrate Aobe island comp with web dynpro.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480
Thanx.

BASIS settings for Web Dynpro ABAP

Hi Team,
I need to know of settings required (configuration) for Web Dynpro ABAP. Please help me on this. Please also let me know of how these settings can be implemented.
Regards,
Amit

Hi Amit
First you have to check the domain, if it is not maintained then maintain the domain in your operating system.
To do this, follow below path :
-- Right click on My Computer >> Computer Name tab >> Click Change >> Click More >> Enter your domain name in the format u201Ccompanyname.comu201D in the section Primary DNS Suffix of this computer
u2013 Click OK
And then go to your SAP to set "icm/host_name_full" in transaction RZ10.
Choose your Instance profile, click on Extended Maintenance and then click on the Change button
As "icm/host_name_full" is not present for you, add it by using the New parameter button
set the value to <hostname>.companyname.com (hostname can be seen through transaction RZ11).
Save and activate your profile and after that restart the R/3 server to take effect.
Hope this will solve your issue.
Regards
Brillion

How to call custom themes for Web Dynpro ABAP Application?

Hi,
I need to change the appearance of Web Dynpro ABAP application. So far I followed below steps,
1.     Created theme folder u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019 ).
2.     used program BSP_UPDATE_MIMEREPOS to dowmloaod content of u2018sap_tradeshowu2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> sap_tradeshowu2019) to desktop.
3.     Modified the themes using Eclipse Theme Editor.
4.     used program BSP_UPDATE_MIMEREPOS to upload modified themes to MIME repository u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019) .
My current URL is like http://server.name:XXXX/sap/bc/webdynpro/sap/hrrcf_a_startpage_int_cand?sap-client=XXX.
Now I want to know how custom themes called for Web Dynpro ABAP Application.
Is my approach correct?
...Naddy

Hi Naddy,
What you used is one way and even I failed when tried that method,
Instead go to SE38 - WD_THEMES - and you need to upload the zip file and you need to follow a folder structure.
it is case sensitive, atleast the zip file.
Make a zip file by name "Project.zip" -
Create a Folder Project and have the below folder structure,
1 data - all the properties files and also the designinfo file, below is the code
2 themes - (to get all the files download the theme from portal and you will have all the folders)
   2.1 ur
     2.1.1 name of the theme
       2.1.1.1 common
       2.1.1.2 csf
       2.1.1.3 r
       2.1.1.4 ur - all the css files (would be good if you can get the files from the server.)
       2.1.1.5   WSRP
3 war - empty folder
*.designinfo
isVisible=true
version=7.0.14.1.0
isDefault=false
isSapDesign=false
designName=**** name of the theme
Once done create a zip file and click on Start Import and give the path and will ask for transport request, it will take a while to upload once done as mentioned in the use the parameter sap-ep-themeroot="path"
This will resolve the issue.
Cheers-
Pramod
reward points if helpful

Create Transaction for web-dynpro ABAP

hi
Can you help me in creating a transaction for web-dynpro ABAP.
thank you.

If you want a SAPGUI transaction code that will launch your Web Dynpro ABAP application then I suggest creating a parameter transaction code that wraps around the SAP standard transaction code WDYID. You can use the parameter STARTMODE to decide if you launch your browser within the SAPGUI window or if it opens a new browser window. You will get SAPGUI based Single Sign On with this transaction code as well. Here is an example of a TCode I setup:
http://www.flickr.com/photos/tjung/2758987559/
And here is what it looks like when running in place within the SAPGUI:
http://www.flickr.com/photos/tjung/2758987583/

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Are there any standard web dynpro ABAP or JAVA for material creation(mm41)?

Hi SDN,
I have got the requirement to provide Web Dynpro application for material creation (transaction code is MM41) and I would prefer to enhance standard Web Dynpro more than develop from scratch. Now I got only the Web dynpro ABAP component for create sales order called "LO_OIF_MAIN_COMP" and GUI HTML for purchasing order that come with business package Eh4.
Anyone who know please kindly help me.

>but I afraid that I'm not able to find out what is its component name from application
You could just lookup the WD Application in SE80 and then it will show you the component name. From SE80 choose Edit Object from the toolbar. Go to the Web Objects tab in the dialog. Type in the WD Application name and hit enter. You will then see the details of that application.

Different languages are not available for Web Dynpro ABAP (WDA)

Similar Messages

Maybe you are looking for