Different languages predictive text

hi all
I'm used to swiftkey keyboard on my android tablet and therefore I'm asking here: on my 925 there's no way to have suggestions in 2 different languages while texting. Any hidden setting or just take it as it is ?
tks
mauro

I have an E71.  Should be similar in OS to your E63.
To access the accented characters hold down the bottom right key. Should be labeled chr/ctrl (at least on mine)
While that button is held down.  press on the letter you want to have the accent on.  It should now type with an accented character.. if it is not the right one then just tap the same letter again (again with the chr key held down).
Hope this makes sense and helps!
E71-2 Grey Steel
type: RM-357 code: 0569371 FW: 410.21.010
08-02-2010 Nokia E71-2 (236.06)
Attachments:
Screenshot0006.png ‏16 KB

Similar Messages

  • Text Determination -Different Language

    HI Friends
    How do we maintain Different Language in Text
    Example We are Creating Sales order in English i would like to maintain other language in (Text Format), We can able to type in English only ,We may have  other Language in Text Formate the same shall be copied in Text Tab
    Please some one guide me
    Regards,

    Hi
    Please check the below link. It might be useful for you.
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=31187
    Viswanath

  • How use different languages in the edition and have the grammatical corrector?

    Hello,
    I am using the "ibook author" to create a magazine with different languages as text, and I would like to know if the program can reconogize the different languages, because it is cutting very bad all the words when it arrives to the end of the parraf.
    Please let me know what solution could work for this case.
    Thank you very much in advance
    best regards
    jc9revolution

    Works everytime i try
    screen shots
    new book with basic template.
    First add second chapter
    then
    1) click TOC page tab/button
    2) select image drag new image and replace image
    3) click second dot to go to next chapter (2)
    4) drag in new photo (farmer guy is new photo, replaced b&w flow photo)
    now click on frist dot to go back to chapter 1 TOC will be first photo draged in (nycity)

  • Upload positions-text in different languages?

    Hi folks,
    we have to enter positions in different languages. To enter new positions we use a flexible upload - method. We have got one upload-file for EN and another one for DE.
    The problem:
    if we upload the EN-file, the text of the positions in DE gets blank,
    if we upload the DE-file then, the text of the positions in EN is blank.
    So one of the fields (either DE or EN) is empty and would have to be entered manually.
    What can we do to upload both DE and EN - text for the positions?
    Is this possible at all?
    Thanks for your help,
    Thomas

    Hello folks,
    it´s possible to upload different languages!
    It´s easy if you know how to do it:
    create an upload-method with (at least)
    Positionplan and language in the header
    Position-nr and text (short, medium, long if you want) in the body
    --> NO further information (hierarchy, type or whatsoever)!
    Create a file with information above
    Import the file
    --> if positions are available the new language will be filled in
    --> if you accidently address a new position you will get an upload error (as no hierarchy-info is available).
    Hope this will help others as well,
    Thomas Kejik :-)
    PS: special thanks to Tanja Ritter who provided this trick.

  • Texts in method in different languages

    Hi,
    I have a report which generates a string in different languages depending on the selection input.
    I have translated the texts in method (for example text-t01) from original language EN to Chineese ZH.
    When the user is logged into the system using EN language, I use SET LOCALE LANGUAGE ZH, then
    I read the texts which are in Chineese which is correct, then I switch back to SET LOCALE LANGUAGE EN.
    But the texts afterwards are still retrieved in Chineese language.
    Thank you for the help!
    Best Regards

    Hi,
    Once we translate the texts from source language EN to target language <anything>, then when we login to the client with that target language , the text will be seen in the target language only...if we login with EN it will show in English langugae...
    either SE63 or from the menu->translation in se38(for programs).
    Regards,
    Nagaraj

  • Text Modules in different languages

    Hi,
    I want to create a TEXT MODULE in different language. For example, i created a Text Module in English language. I want to create in german with the same Text module name as in English language.
    Example: Text module name ZTEST (EN) and ZTEST (DE).
    Any help is appriciated.

    Create text module at SO10 Transaction,first create En Language ,then use formatting options from Style transaction (SE72 - create paragraph format ,charcter format )..
    again create same text module with diffrent language ,but same formatting option may not applicable,you have to use diffrent ones..

  • How to text for Submit button in different languages.

    Hi All
    We have a requirement to add 'Submit Button' in iSupplier Portal's Standard Pages.
    We have substituted the controller to add the Submit button and it works fine also .
    Our Application has 7 different languages, so the requirement is to show the button Text w.r.t the
    language only .
    We have written the following code
    OASubmitButtonBean oasb= (OASubmitButtonBean)oapagecontext.getWebBeanFactory().createWebBean(oapagecontext,"BUTTON_SUBMIT");
    oasb.setID("IPOPrintReportButton");
    oasb.setUINodeName("IPOPrintReportButton");
    oasb.setEvent("IPOPrintReportButton");
    oasb.setText("IPO Print Report Button");
    //oasb.setTranslatableText("XXIPO","XXIPO_PRINT_REPORT_TXT");
    pageButtonBarBean2.addIndexedChild(oasb);
    when we have used setText method , we are getting the same name in every language. so we tried using setTranslatableText Method and gave it the Messages to set the Button Text. But Now button text is empty .
    Pls tell us how to achieve this requirement of having text in different languages on the button ..w.r.t the environment language. we have also defined same Message 'XXIPO_PRINT_REPORT_TXT' for other languages.
    naveen

    Hi Kumar
    Can u pls brief this a little more .
    Lets say I get the language as German in the Controller . Now how do i set the test for the submit button .
    Do u mean to say I should check like this:
    If (langaue is german )
    button.setText("German Submit")
    else if (langauge is netherland)
    button.setText("Netherland Submit")
    harcoding the vaues in the contorller??

  • How to maintain long texts in different languages in a message class

    Hi All,
    I have maintained a message and its transaltions in some other languages in a custom message class. I have maintined the long text in English language. But I am not getting how to maintain the long text in other languages.
    Please help.
    Regards
    Kiran

    Hi Kiran,
    Good!
    In the message class corresponding to that message give the place holders &&&&.
    Like 001    &&&&
    in the program.
    Message <class>001 with text-001 text-002 text-003 text-004.
    then you could disply long text.translation takes place if u enter in different language automatically.
    thanks,
    Sunil.

  • Maintain text in report in different languages

    Hi Gurus!
    I have a report in different languages. Now when user logins in different languages, I want him only see English in GUI in that specific report. How do I do that? I don't want to re-translate again all the text in text elements and selection text.
    Thanks!

    HI
    Remove all the text-element and place the values in terms of constant.
    Regards,
    Naresh

  • How can i set predictive text to a foreign language

    I'm new to apple and iPhones. I've got everything setup in English but I frequently want to send text and/or email messages in French. When I do this predictive text jumps in and changes things to what it thinks I want in English. e.g. if I type tous it predicts I want toys and inserts it accordingly. How can I set predictive text to a foreign language.
    (p.s. my wife's iPad works fine as it has a button to press for alternative language but I don't see anything similar for iPhone)

    Add the French keyboard.
    Settings > General > Keyboard > Keyboards > Add > French

  • Print PO item text in different language

    Hi,
    We have a global vendor whose communication language is maintained as PL in vendor master while our logon language is EN.  The text therefore is maintained in PL language.  It seems the output program only picks the text in logon language (EN) and so the PL text is ignored.  Current the solution we can find is either ask user to logon with PL language when he needs to print the PO, or manually input EN as communication language when creating a PO.  But I hope to find a better solution.  I tried changing the the message output to be PL but doesn't help.  Any idea? 
    Thanks a lot in advance.
    Susan

    Thanks DEV, to clarify, for this particular PO with PL vendor, only item text in PL language is maintained. It doesn't seem like SD, we can manually choose language and maintain texts in different language (I think I saw some notes saying this - one PO one language of text only).
    Also both from other threads I saw and my test proves via maintaining communication condition record with other language doesn't work.
    However from you second thread, I am curious about this saying :
    If you want to print the PO in different language.
    Then in Message determination IMG settings or NACE.
    You can modify the output type NEU
    here change the language from EN to your relevant language as per SAP.
    If you want the both EN other language then copy the std NEU & create as per your requirement & mention the language in that new out put type.
    rgds
    gsc
    I want to know how to change the language for a output type?  I search the whole output type configuration but I didn't find anywhere to maintain language for a output type.
    Thanks Susan
    PS, so far I feel the first reply from Sharma makes sense, the only thing is not sure if SAP is supporting the idea of making change to routine (comprehension issue)

  • Maintain Text in Different Language

    Hi PS Expert,
    I have query for maintaining text in multiple language, let me elaborate my query..
    I created std project having all WBS element & maintain WBS Text ( description) in English lanuage.Now my client prefers that if a person in other country log into SAP in German language then he should see all description in German language.
    I have one solution that log into SAP in German Language & maintain all text again in German language. This will be just repeatition of the work what I did in English language.Client wants to maintain all text in 6 language & I have to repeat the same work 6 times.
    If you have come across such issue , please tell me about your solution.
    Regards,
    Ashok Sangal

    Hi Ashok
    Activate business function OPS_PS_CL1
    Multi language support has to be activated fro the Object ML(IMG-->Project system-->activate multi language support)
    when you create a new PS object , a new tab short text appears, in which you can maintain different language keys and description
    so when ever user logs in different language then the description of PS object will appear in that language if it is maintained in short text tab
    vijay

  • Text determination for different languages

    how to set up text determination of different languages based on the customer country location.What is the configuration?
    Thanks for your help,
    Andy

    hi,
    it is not related to customer.
    it depends on LOG ON LANGUAGE.
    if you have not given any thing it will be in ENGLISH.
    hope this clears your issue
    balajia

  • Displaying text in different languages using smart forms

    hi,
      I am working on smartfroms.
      I have to display the text in different languages using smartforms.
      how to proceed ?
    thanks,
    Aruna.

    To Display in Different Languages:
    Smartforms:
    In the Smartform you create:
    In General Attributes, in Translate, select the radiobutton 'Into Selected Languages' and specify the lang for which you want the translation to be available.
    To translate:
    Go to SE63.
    In menu, Translation -> ABAP Objects -> Other Long Texts.
    In the Object Type Selection window that appears, expand FS ( Forms and Styles) and choose SSF (SAP SmartForms)
    Specify your form name in Object Name and select the source and target lang and click on Edit button.
    In the editor screen specify translated text in the lower half.
    After you are done, click on Save Active button.
    To view your form in the translated language, specify that language when you login.
    SAPscripts:
    Goto SE76.
    Specify the script name, source and target language. Click on Create/Change button.
    Specify all the translations. Click on release.
    It will prompt you to translate window contents.
    Double click on the window and translate the contents. When you are done, the Translation Status will become COMPLETED. Click on Release again.
    (You can edit and check too)
    Now when you preview by choosing the desired language, the translated script is displayed.
    Hope this helps
    Edited by: Jayanthi K on Jan 15, 2009 9:34 AM
    Edited by: Jayanthi K on Jan 15, 2009 9:35 AM

  • Selection Text Translation to different Languages

    Hi Gurus,
    How can i translate the texts to different languages for selection screen of a program and how can i transport the same to next systems.
    Moderator message: standard functionality, often discussed, well documented, please search before asking, @all others: please do not reply to such questions, you know they will be locked!
    Edited by: Thomas Zloch on Nov 8, 2010 2:21 PM

    You can translate selection texts of a program two ways
    - [SE38|http://help.sap.com/saphelp_nw04/helpdata/EN/d7/c4673cffbb4c34e10000000a11402f/frameset.htm] - menu : goto, translation
    - [SE63|http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/3892c1be5c1ea9e10000000a1553f6/frameset.htm] - menu : translation, short texts, ABAP, Program texts
    Be aware that some texts use ddic definition of data element, so the texts of the underlying data-elements must also be translated (if they are not already)
    - SE11 - menu : goto, translation
    - SE63 - menu : translation, short texts, ABAP Dictionnary, Data element
    Regards,
    Raymond

Maybe you are looking for