Different languages without using SAP authentication

Hi folks,
is it possible to leverage the language capabilities of BW in WebI through an Universe WITHOUT using SAP authentication (means having a fixed user in the underlaying BW connection and NOT SSO)??
We are facing this requirement in a POC having Cognos as oponent and they can do this!
Thanks and regards,
Harald

Hi Sebastian,
yes I know, but this is then fix per connection. What I want is having one universe with one connection, BUT still leveraging the different language-texts from SAP BW... Is this possible or not? Until now I only see the possibility to create one universe for each language and this is not satisfiying the customer...
Regards,
Harald

Similar Messages

Error When Trying to Schedule Webi report using SAP authentication

Hii,
We are trying to Schedule Webi report in CMC for Group of Users using SAP authentication(SSO) ,While Trying this we are geting error Unable to Connect to SAP BW server Incomplete Logon Data ..(IES 10901) .
Authorization done at BI side and Its working properly.Users are able to login into BI Launchpad and View Report as per authorization
Some Webi reports are created using BICS connection and some are created using Universe Design Tool (.UNV) which are migrated from BO 3.1 to BO 4.0
Server Status:
BO server and Client Tools-:BO 4.0 SP6
BW System-7.01
Please refer attach Screen Shot

Hi Rupesh,
Please check the below note:
Seems issue with SNC/STS settings.
1798197 - Schedules fails with error "Database error: Unable to connect to SAP BW server Incomplete logon data.. (IES 10901)" in BI 4.0
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

'Change your password' error when log to designer using SAP Authentication

Hi All,
Here is the scenario. I want to create a universe on BW.
1. I try to log into designer using SAP authentication (by choosing SAP as the authentication option)
2. In the system name its the name of the CMS
3. The username and password that I entered were for my SAP system. (Yes, my SAP role is already present in CMC)
4. After I entered, I got a message saying ' You must change your password to continue. If you do not change your password, your account might get disabled'.
5. I am prompted with dialogue box to change my password.
6. After I enter a new password (fairly complicated), it gives an error Failed to change password/ Details : [repo_proxy 15]. Sessionfacade:: changePassword - User password has not been updated (Incorrect password).
I know that's not the case because I am able to log into SAP GUI and into CMC using my SAP credentials.
Any advice please ? Why is this happening in designer ?

Hi,
Your issue may be fixed in FP1.8 with the following reference:
ADAPT01229385
Description:
+If an Enterprise alias is created for a SAP user accounts in the Central Management Console (CMC), and set to change their+
+passwords at the next log on, the SAP users may be unable to log on to applications with their SAP credentials.+
+This problem happens even after the Enterprise alias is removed from the SAP user accounts in the CMC.+
I hope this helps.
regards,
Henry

Using Synchronous webservice without using SAP XI

Hi,
I have a requirement of wherein which my client has provided me a dot net webservice which needs to be consumed in SAP R/3 using which i have to build an interface between SAP R/3 and the legacy system. This interface needs to be synchronous in nature.
Please let me know how to handle this in ABAP and is this possible without using SAP XI / PI.
Step 1:
SAP r/3 ( sends data )------> (Webservice) Legacy system
Step 2:
(Webservice) Legacy system -
> SAP R/3 (recives response from legacy system)
Regards
Joel

Hi Joel,
You can use the webservie (SOAP or WS[if it is PI7.1server] adapter).
By calling the webservice from the ABAP.
http://help.sap.com/saphelp_srm40/helpdata/EN/2d/64d023e74911d6b2e400508b6b8a93/frameset.htm
or by using PI also it is possible
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f?quicklink=index&overridelayout=true
Read page no 26th onwards.
> Step 1:
> SAP r/3 ( sends data )------> (Webservice) Legacy system
you can use Proxy to PI to SOAP/WS scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
> Step 2:
> (Webservice) Legacy system -
> SAP R/3 (recives response from legacy system)
you can use SOAP to PI to Proxy scenario.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/464442c1a1c253e10000000a1550b0/content.htm (For SOAP)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies (for proxy)
Regards
Ramesh

Error when using SAP authentication for Designer

my error is:
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(The
secSAPR3 DLL could not be found or does not exist(hr=#0x80042a01)
can you help me?
regards

hi,
pls refer the link
Error when using SAP authentication for Designer
try re-installing BOE and check
hope it helps,
sundar

"conect" 2 different companies that use SAP

hi all!
My question is:
We have 2 different companies that use SAP. Is there a way to "conect" both companies, so that company A gets information than company B has.
For example inventory levels from B, so that A can replenish when B has certain level?
Thanks a lot!

Hi Mflores,
If you implement BW the you can get complete information n number of companies.
Regards,
Anil

Connect BO to SAP-BW system without using SAP Intergation Kit.

Hi All,
How Could we connect and do reporting in BO from SAP system without installing SAP INTEGARTION KIT ??
Like we could read data from Oracle by simply creating a Oracle connection in Desiger and all the tables are visible at universe level.
Do we have any such metod where SAP INTEGRATION KIT NOT comes into picture. and we could either read SAP tables or cube at Designer level or at reportr level.
DO We have any Guide or document or way were we would not use SAP INETGRATION KIT .
Thanks !!

Hi,
Try this .. not sure i hope it will help
http://edocs.bea.com/wls/docs90/jdbc_drivers/oracle.html
http://support.businessobjects.com/documentation/product_guides/planningxir2/en/xir2_Oracle_Setup_Guide_for_BusinessObjects_Planning_11.20_en.pdf
Regards
Ashwin

Different language when installing SAP Business One client

Hello
I live in Mexico City and we are using SAP Business One in Latin american Spanish. When i install a new computer with the client of SBO, and i run it. I always get it in CZECH language and not in spanish like the server. Is there any way i can install the clients with the same language as the server???
Thanks
Jacobo

Hi there,
I am also having this problem. i have tried what you suggested (removing the LRF files except for the English UK one) But this did not resolve the problem. Did u ever manage to resolve this problem?
Greeshma

Got a new iphone4s but my laptop is broken, can i update my new iphone on a different laptop using my itunes account? Can I transfer my itunes onto a different laptop without using my broken laptop?

Hi, yesterday I lost my iphone4s and a replacement is arriving today. Unfortunately my laptop also decided to break yesterday and I cant turn it on. Is there any way when my new phone arrives I can use my freinds laptop to access my itunes and update my phone from his laptop without using my own laptop?

You can only redownload past purchases on your iTunes:
Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

Accent marks in Pages. I'm looking for a simple way to employ accent marks when writing in another language WITHOUT using a different keyboard.

In Microsoft Word for PC, all one needs to do is hold the CTL key down, press the accent key needed, such as ` or ~ or ' for example, then press the letter key over which the accent should go. Does Pages and Apple Mail not have such an easy way to do it? Thanks to anyone who has a better way.

Type the dead letter and the vowel:
eg umlat is option u then the vowel = äëïöü
option i then the vowel = âêîôû
option e then the vowel i = áéíóú
option ` (above the tab key) then the vowel = àèìòù
option n then the letter = ñãõ
They are characters usually associated with the accent and have been standard on the Mac for decades.
Peter

Can't log into BOE system using SAP Authentication when using Document Link

Hi all.
We are setting up our dev SBOP 4.0 SP2 system and are working on getting everything configured to our requirements.
What I am currently struggling with is the Document Link functionality.
If you browse to a document (WEBI or Crystal) in the folder view in the BI Launchpad and right click and select Document View, the system presents a static link to the report. The problem is, when I execute that link in another browser window, the system prompts me with the default login screen that consists of the User Name and Password which utilizes the Enterprise authentication by default. Our login authentication is set to SAP everywhere else.
I've already set the parameters for BILaunchpad.properties to allow us to log into the BOE server using our user IDs and that works without a problem. I've also configured the OpenDocument.properties file as well. Neither of these two files seem to have any impact on the screen I'm seeing when I try to use the Document Link. (And yes, I've restarted the tomcat server each time I've made a change to the config files.)
I'm running out of ideas - have any of you encountered this issue before and do you have any suggestions?
Thanks.
-Brian

Hi,
i saw this also a couple of times that the changes to the "custom" folder wont take affect.
Try the following:
1. Stop the Tomcat
2. Rename the properties file in the custom folder
3. take a backup of the properties file from the config folder
4. make the changes to the properties file in the config folder
5. start tomcat
Maybe this will solve the issue but if you deploy a new Fix Pack or Service Pack these Settings will get override.
If this solved your problem i would recommend you open a Support Message with the SAP Support.
Regards
-Seb.

How can I keepalive for 2 different applications without using script?

Have a CSS with 2 web server loadbalanced. Initially the keepalive was set to ssl but now the client would like to add another keepalive type http. How can i do this without writing script. Though there is quite number of example in the forum but I'm still confused. Is there any clear and complete sample config for this type of installation.
Below is the example of working config of my client.
service server1
ip address 10.150.1.10
keepalive type ssl
active
service server2
ip address 10.150.1.11
keepalive type ssl
active
Owner Layer3
content Layer3_a
add service server1
add service server2
vip address 10.150.1.12
balance aca
advance-balance sticky-srcip

If you want to use multiple keepalives for a service, you must use a script. The alternative would be to create 2 content rules, and 2 sets of services, one for port 80 (or whatever) and one for port 443 (or whatever), and use http for one and ssl for the other.
Michael Voight
CSE

How do I unhide the URL window/field that allows me to directly enter a different URL without using the Search Window/field?

I need to unhide the window or field that allows me to DIRECTLY enter a different URL. I do not want to use the search engine. I want to manually enter the URL of my choice and go DIRECTLY there.
So, how do I unhide the URL window?

It is still there at the left most part part of the address bar, but you have to press and hold the trackpad to use it.
Click the Share (arrow out of the box) button to add bookmark.

Compare two tables on different server without using Linked Servers

I have an SSIS package that needs to compare a table to another table on another server. Then only delete data from the first table if it exists in the second table.
I know this is possible with Linked Servers but we are doing away with them in my company. Is there a way inside of SSIS to do this?
Oh and I can't use a Data Flow since I don't know the table names or columns at run time (the whole package is dynamic) so I can't map the columns ahead of time.
So no MERGE JOIN unless it can be used outside of a Data Flow.

You 'll have to use the Data Flow Transformation, thing is, given the constraints, your only option seems to be in generating the package programmatically (using code).
The type of a program would be a Windows Console. The program would expect a few parameters as the source and target tables along with any necessary connection parameters.
Then use the merge join (being the easiest to code in) in an Execute SQL Task component.
Examples of coding packages:
Samples for creating SSIS packages programmatically
PS: I can tell you, given your circumstances, at the very minimum the impact on the bottom line of your company is brittle apps accompanied with expensive maintenance which translates into reduced ROI from your tooling.
Arthur My Blog
The package is table driven and is a dynamic archival process. The end user just fills in the framework table and the package archives data from within a certain time range. The table can exist on any server, any database.
That part is done. The part that still needs to be accomplished is to delete data out of the base table since it is archived. I need a safe way of doing this and so thought to compare the archive table against the base table. Because they
can exist anywhere and can have any name I am not sure how to do this without Linked Servers. That being said we will not have Linked Servers for this.
Is there another safe way to delete data out of the base table?

How can I use a Value at several different places without using a long wire?

too much wire alway make program into mess.So can I use the Value in labview like using it in C.
I have try the "Local Value",but it don't work well as a Cluster. For example, I can't connect it with "Unbundle By Name" and other Cluster Tools.

Overuse of local variables is probably worse than the "mess" created by long wires. It increases memory usage, violates data flow, and increases probability of race conditions. A better solution to long wires is to make the diagram smaller by using subVIs. There's been a lot of discussion here and in the various LabVIEW style guides about avoiding local and global variables. I use them seldom and only then when I doing some complicated user interface.

Different languages without using SAP authentication

Similar Messages

Maybe you are looking for