Different last screen for transaction VA03 in ecc6.0 and 4.6 c

The last screen for transaction in ECC 6.0 is Change status while it is Display Status in 4.6 c. SWo, can you please let me know about it?

Hi Mithun Dha,
I have the same behaviour in my System. The scenario is Upgrade from 4,6c to ECC 6.0 and my tables are MSEG and AUFM. These tables with indexes.
The Basis are Running a Updating Statistics for a Single Table, with Tx DB20 In this moment,the process are running and i am waiting the result.
A question: What are your version of data base ?? I´m using Oracle 10G.
look the detail information in this link:
(http://help.sap.com/saphelp_nw04/helpdata/en/df/455e97747111d6b25100508b6b8a93/frameset.htm).
If someone have more information, please help us to solve our problem.
Regards,
Rodrigo Ramirez.

Similar Messages

Can we have two different logon screen for the Portal

Can we have two different logon screens for the Portal?
We should split the Logon application in two different applications:
Login # 1
should be read a DataSource.XML reading the Active Directory (Microsoft), to read-only the profiles from the AD, and block some IP address range.
Login # 2
should be read a DataSource.XML reading the Portal user only
Is this possible?

Hello Developer,
Did you find an answer to this problem. I also have a similar issue at hand and am wondering if anybody has a solution for this.
Thanks, Akhilesh

My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

Customizing the create screen for transaction SDCR

Hello,
We are running BBPCRM 500 level 12 SAPKU50012
We would like to reduce the number of fields shown when one enters a change request or service desk incident. There are many fields that are visible but not necessary. Is there a way to u201CHideu201D these fields? For example in transaction SDCR I do not want to see the Sold-ToParty or the ProductID.
Also we would like to have some fields automatically defaulted to common values. How would this be setup? There appears to be a long winded way of setting partner determination. But, I am just looking to fill in an initial value during the initial creation. How can this be done?
Regards,
Avrohom

Hej again, I have now added a button and a screen to transaction MK01/MK02 to add these extra fields that i have defined in the table LFM1. Thats works very well.
Now I need to do similar for the table LFM2, does anyone know if there is a similar options to add fields to the "Vendor sub-range" screen. This is still in the same transaction MK01/MK02 but you go via "Alternative Data" and then you enter new vendor sub-range and in that screen I need to insert 2 extra fields that i have defined in the table LFM2.
Does anyone know if there is a standard way to add fields to this screen or what would be the best way to do this.
Best regards Gisli

Changing FPM Next button on Last Screen for GAF Floorplan

I have set up a GAF floor plan to walk the users through a custom process and I want to change the label and event ID for the "Next:Button" on the last step. I see in the component configuration when I click on the Next:Button on the last step I can configure and change these attributes, however, every time I test my application the last step still has the Next button displayed and inactive.
How do I get my custom text label and event to display and be active on my last step of the GAF floorplan?
Thanks for the help.

Hello Tom,
generally we do not recommend hiding Previous and Next button of the GUIDED activity floorplan (GAF), because those are the basic buttons to navigate through the scenario.
What you would like to have is a possibility which hinders the user navigating to a further step. You can do that by setting the navigation event FPM_NEXT_STEP and setting it - under a certain condition - to value FAILED. You do this within PROCESS_EVENT of your UIBB component or AppCC, setting exporting parameter EV_RESULT = 'FAILED'.
To show the user the failure of the event, additionaly you could raise an FPM error message - inside there you could also mention the reason why navigation has stopped.
Best regards,
Julia Bender

Different SAPlogon screen for prd and dev systems

Hi!
I would like to distinguish the SAPlogon screen for production and development systems.
For example:i logged into to the SAP system by SAPlogon and i want to see in the right top corner of the screen the letter P or D, etc.
Could you advise me how to do it?
Thank you!
Dan

I think this can be done but little difficult.
After installing your sapgui, you have to change the picture in the right corner which you can find inside the folder programfiles-sap-sapgui and can search in the picture. If you replace the picture with your picture, you can find it there. But i dont think it can be done seperately for dev, qual and prod systems.
With Regards,

Transaction VT04 in ECC6.0 and 4.6c

Hi all ,
The transaction VT04 in ECC6.0 does not have Delivery type as selection criteria . SAP R/3 4.6C was having this selection criteria . We were using this to differentiate between Sales Order Shipment Documents and STO shipment document.s How can we get the delivery type selection field back in the transaction VT04 . Kindly advise.
Rohit

On VT04 go to rules section, writte a name and clic on maintain.
There you can see 5 grouping criteria that appears in blank and three more in gray. On the fistgrouping criteria that appears in gray, press F4 for matchcode, there you can see LFAT field.
Select it, and you can maintain that value as needed.
I hope this help you.

HT204053 I created a different Apple ID for Icloud on my new IPhone and having problems with getting Itunes,etc. How do I change my Icloud Apple ID to be the same ID and password?

I created a different Apple ID for my Icloud on my new IPhone (said a free email was available or something similar) rather than the other choice offered of using my same existing Apple ID. Now I keep having issues accessing my account and my password isn't working to access Icloud to download Itunes. Can I undo this new account I created and just use my one existing Apple ID? This is my first IPhone and confused with this part of the setup! Thanks.

If you know the answers to your security questions, you should be able to change your password without using email authentication (see http://support.apple.com/kb/HE36). If you don't, you may be out of luck.

Creating of Notes for Transaction Code RECN(Using Classes and Methods)

Hi Experts,
I want to Create Notes for Transaction Code RECN, This should not done manually but should be done programatically.
I had used the Class CL_GOS_SRV_NOTE_CREATE to create the notes.....but here comes the doubt for me.....note will be created by using this class and how this can be created for the Tcode RECN........
I am using the Real Estate Module.....Plz help me....awaiting for ur helpful answers....
Thanks in Advance.....!
Brahma

Hi kanagaraja,
Thanks...!
The BADI which u have given is not existing in my system...i had gone through the se18 and se19 tcodes....
Awaiting for ur response......!
Thanks,
Brahma...

Ipod touch will not turn on. Did a synch turned on. Then turned off. and tried to restart. Apple logo came on screen for a few seconds then disappeared and cannot turn back on. This is a new replacement unit. only have had it 4 days.

Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days

Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device

Missing part of screen for transaction PA40

The part on the screen where you can find the installed actiontypes is for a
colleague not visible in R3 PRD.
The strange part is that his role is a copy from PRD and it's perfectly visible in QAS R3.
Can you help me please where to find the missing link.
Marie Louise Gast
Deloitte SAP Solutions Center - The Netherlands

in his system, check
IMG>PM>PA>Customising procedures>Actions>Change Action Menu and check in User Group Dependency on Menus and Info Groups and in Action menu. check for inconsistancies/id it is usergroup dependent or not.
Sometimes if Transports are not done in logical order these things happen.

I think I have the last update for iPhoto, lately its been crashing and do not open. It doesn't give enough time to go on the " Help " section to find out what is goin on.

My iPhoto crashed after I was trying to upload some fotos. It never finished the upload and it frozed, then it crashed. Now every time I open it, it opens on some of the last pics i tryed to upload then it crashes. What can I do?

What system version are you running and what iPhoto version do you have? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

Calling a Standard SAP transaction VA03 from another web dynpro application

Hi All,
I have a requirement wherein I need to call the standard SAP transaction VA03 whenever a sales order is selected in some other we dynpro application so that the sales order gets displayed.
No regarding usage of OBN for the above functionality I have certain queries:
1. In order to call VA03 do I need to create a transactional iview for it or is there any direct method.Also how to pass this sales order number as parameter to the T.Code.
2. Can we use standard business object BUS2032 for OBN or a new Business object is created.What exactly is the purpose of these standard business objects in portal and when should they be used.
Thanks in advance
Aman Gupta

Hi Aman - Do you have a portal team in your project or you have to create the IVIEWS yourself?
I do have a portal team and I dont know how they create the IVIEWs but for example, I will go to my portal team and I will ask them to create an IVIEW for TCODE VA03, they will created and they will tell me the input parameters they entered for the IVIEW so I can call OBN and display in webdynpro.
SAP in SRM has webdynpro e.g. for BUS2121 and they have an IVIEW already implemented in the portal context pointing to the webdynpro of BUS2121 so we can used the IVIEW by calling OBN and passing the parameters; in my case the object_type will be 'shc' and the operation will be 'display' and the paremeters itab will be the GUID of my shopping cart, that way the OBN can understand which Shopping cart open and in which operation mode.
I also did something like your requirement, I need it to display a specific case in Records Management but SAP has a standard IVIEW for records management 'RMREGEDIT' that didn't work for my requirement so I went to SE38 created a program that displayed the case based on GUID and I created a TCODE of my custom program. Portal team created a custom IVIEW of my custom TCODE and they told me the input parameters to call the TCODE in OBN and I pass in the itab parameter the GUID of the case using the FM that I post before.
The action to call the OBN is in the event handler ON_CLICK of my ALV and the action is getting trigger when the user actually clicks a HYPERLINK in the ALV.
Hope this helps you!
Please feel free to ask me more details if you need.
Jason PV

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

Different last screen for transaction VA03 in ecc6.0 and 4.6 c

Similar Messages

Maybe you are looking for