Different level numbering in ID document

I'm working on a 367 page document in ID CS3, Windows on a PC. This big document is separated into what we call chapters, sections and subsections. (Levels 1 through 6) and is basically a giant outline. The problem is that we can't get the numbering right in Level 3 to match the output we want. Level 1 (Chapter 1)is defined in the Paragraph Style "Heading 1" under Numbering Style as Chapter ^#^t. That works. Then Level 2 (Section 1.01 for us) is defined in the Paragraph Style "Heading 2" under Numbering Style as Section ^1.^#^t. Then Level 3, Heading 3, just doesn't work. We need a different code or something to make the output be 1.01.010, then 1.01.020 and 1.01.030. Then change with the previous level, which we have set it to do, so that when the "section" changes the new number would be 1.02.010 and so forth by tens. Is there a list somewhere of codes that can be put in here to make this easier? My levels 4 through 6 aren't working because we can't get level 3 right. Any ideas?

Thank you for trying. This is what I want the result to be:
Chapter 3 Applications and Permits
Section 3.01 General
3.01.010 Purpose
This is what your coding resulted in:
Chapter 3 Applications and Permits
Section 3.01
1.01.300 Purpose
Even after playing with it some more, I still can't get the end result. Any other ideas? Maybe I have a problem in another part of the doc that's not allowing the code to work? I don't even know what to check -

Similar Messages

  • Macro - multiply numbers at two different levels

    Hi Folks,
    I am trying to write a macro which takes KF at a detailed level and multiplies it with another key figure at a different level of aggregation. Any ideas in this direction will help.
    A - B
    KF 1 = 10 %
    A - C
    Kf 1 = 20%
    A
    KF 2 = 100
    I want to write  a macro that gives following result
    A - B
    KF3 = 10 ( 10% * 100)
    A - C
    KF3 = 20 ( 20% * 100)
    Regards,
    Sachin
    Edited by: Sachin Ganesh Shetty on Feb 12, 2009 4:57 AM

    Hi,
    I had a similar requirement of running a macro at 5 level and use a data at 3 level as one of the inputs.
    what i did was i wrote a Z function module which called /sapapo/msdp_data_read and retrieved the value at 3 level.
    Thus i was able to extract a 3 level value and use it to run a macro at 5 level.
    Please let me know if this helps.

  • Top-level Numbering Continuation Across Files in a Book

    My department at work is looking to transition most of our files from Word to Structured Framemaker 9 (with an eye to DITA). I am trying to build a master template for this, and running into some numbering woes. I am fairly new to FM, so I'm hoping that there is an obvious solution to this issue, and it is just my inexperience standing in the way.
    Currently, documents that we do manage in framemaker are books which contain different files:
    1. Front Matter File
    2. TOC file
    3. First subject of the document
    4. Second subject of the document
    5. Etc.
    In the template, I have created the top level style as "Chapter" and set chapter numbering to continue from previous file in the book. To me, this is the most obvious way to get FM to treat the top level (only) as continued across files. Historically, the department has just maintained seperate templates for each type of file in the book (i.e., Front Matter Template, First Subject Template, Second Subject (and beyond) Template, etc.).  Because I don't envy the thought of creating and maintaining multiple structured templates with multiple EDDs to go with them, I have consolidated the templates into one master template that contains all the styles needed for whatever part of the document we are working with.
    My issues are:
    1. My team lead would like to abolish the use of the Chapter style in our books, and instead use Heading 1 as the top level in a book. Because we will be doing a lot of importing from Word, and all of our Word docs have H1 as the top level, she does not wish to have to bump all the Headings down in order to accomodate a new Chapter level on top after we import. If this is the best way to go, then how can I tell FM to continue numbering for only H1 across files?  Can I just use the <chapnum$> variable in the Heading 1 style for numbering and get away with abolishing the use of any other chapter designation?
    2. I believe it makes the most sense to set the template to continue numbering for the chapter variable from previous file in the book, since that is the most common scenario.  Then, I can reset the first chapter in the book (manually) to start numbering at 1. Is there any compelling reason not to do this? Will this cause any issues when we go to update a book, provided that we make sure to set the numbering for that first chapter file correctly? I hear that there is a way to set numbering properties for an entire book, but I cannot seem to find this feature - only setting numbering for files within a book.
    Thanks,
    Hannah

    Hannah,
    Using a single template for structured work is a good idea. The template may get big as you add master pages, etc, but management will be much easier.
    Use the <$chapnum> building block wherever you need it, such as in autonumbering for headings, tables, figures, etc. I would set the basic numbering properties in the template for the most often used case, such as a chapter. Thus, set the chapter numbering to be from previous and the page and paragraph numbering to be start at 1, if that is what you want.
    After you create the book file and add the various books, you now have a book whose documents ALL have the same numbering. So, select chapter one IN THE BOOK FILE, right-click it and select Numbering. Set the chapter to be 1. If you want the front matter and TOC pages to be arabic, select the first such chapter, right-click and select Numbering and set the page number to be i; the chapter numbering can be anything. For pages like front matter that do not show chapter numbers, you will have to create special master pages that do not use the <$chapnum> building block. You can also set a chapter number to be text, such as Index.
    Then update your book. The main point is that you set the numbering in the book file, not individual documents. If you do not, when you update the book, FrameMaker will warn you that the numbering in the book does not match the numbering in the documents. Note this is a WARNING. When you click OK, it uses the book numbering settings in the update, NOT the settings in the individual documents. So, it is always best practice to set numbering in the book file.
    I forgot to add... I am not sure how easy it will be to convert Word files into structured FrameMaker. I never do it, but others in the forum will likely have some tips about it.
    Van

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Why does numbers tell me document is invalid. After I did a lot of work on 2 documents last week they won't oopen., Why does numbers tell me document is invalid. After I did a lot of work on 2 documents last week they won't oopen.

    Why does numbers tell me document is invalid and it won't open a spreadsheet?

    Tell us what you have done to your system lately. I'll bet something is different in the last few months that might be involved here.
    Jerry

  • Different Footnote Numbering Styles in One Page

    Hello everyone,
    I searched for a solution to this issue for so long, but in vain.
    I've been working on a document where I have to insert footnotes and assign 2 styles or more to their reference numbers.
    In MS Word, it is easily done. Can it be done in InDesign?
    The following screenshot shows 3 different footnote numbering styles in one single page in MS Word:
    If InDesign does not have the ability to do so, will it do in the future?
    Thank you

    Obviously, my question has completely sunk into oblivion!

  • Pages for iOS: possible to have multi-level numbering?

    Hi all,
    I'm a new user to Pages for iPad (my iPad 3rd gen arrived last week w00t) and just imported a word document with fairly complex formatting. First thing i note is thst all my multi-level numbering is gone.
    Does the app not support this feature? Does anyone have a work-around? The only option i see is to not use numbering at all and use tabs to position the text, but then that breaks compatibility with Word and is very clunky besides.
    Any thoughts are appreciated.

    Hi,
    In the criteria, first have the tables name and above it the folder names (superset).
    Next in the table properties, you can select Display Folder & Column Headings. This displays folder name first and then the table names, so that it appears as table names are a sub set of the folder name.
    Hope this helped/ answered
    Regards
    MuRam

  • Multiple discounts are given at different levels of sales cycle

    I have a requirement,
    Multiple discounts are given at different levels of sales cycle(like opportunity, quotation etc), interlinked with document flows.
    It must be assured that all the matchings must be taken into accounts and are displayed underneath each other.
    ex:
    discount simple : 15%
    discount simple : 12%
    special discount : 10%
    Is it a standard functionality in SAP CRM or should we do enhancement to cope the functionality, if it is an enhancement any idea how to do that.
    Regards,
    Venki

    For quick assistance post testable script.
    Tree processing examples using recursive CTE:
    http://www.sqlusa.com/bestpractices2005/organizationalchart/
    Kalman Toth Database & OLAP Architect
    Free T-SQL Scripts
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Multiple discounts at different levels in sales cycle

    Hi
    I have a requirement,
    Multiple discounts are given at different levels of sales cycle(like opportunity, quotation etc), interlinked with document flows.
    It must be assured that all the matchings must be taken into accounts and are displayed underneath each other.
    ex:
    discount simple : 15%
    discount simple : 12%
    special discount : 10%
    Is it a standard functionality in SAP CRM or should we do enhancement to cope the functionality, if it is an enhancement any idea how to do that.
    Regards,
    Venki

    We have implemented following scenario.
    1st level - FERT - MTO strategy - type 20
    2nd level - HALB - No strategy
    3rd level - ROH/VERP - No strategy

  • Add page numbers to a document in Pages

    How do I add page numbers to a document in Pages on the iPhone?

    When I tap the spanner I don't see Document set up.
    I see this:

  • How to do the reversal in the item level of a (delivery)document?

    hi friends,
    Is there any way to put reversal, at the item level for the document already posted ?
    Do we have any standard funtion module or BAPI to pass value from the editor ?
    My task is, I want to do the reversal in the item level of the (delivery)document.
    I tried with the BAPI - BAPI_ACC_GL_POSTING_REV_POST, but this is reversing the whole document. but I want to reverse in line item only.
    please suggest me.....
    Quick replies would be rewarded.
    Thanks in advance.
    Regards

    Hi Rob,
    yes, what you told is right. I want to do the same. I will first reverse the particular line item and will post the correct entry. but here, I need to do that for a huge number of document. It will be good if I pass the values using a funtion module or a BAPI to reverse. So, I want a Funtion Module or BAPI to process it.
    anyway, after reversing the document, I am going to post the document with correct entry.

  • Display different level for same hierarchy value in BO 4.0

    Hi Expert,
    I have one question for Webi for BO 4.0
    We have one hierarchy in BW side and we hope to display differet level in same report for different column
    For example, column A is for level 6. column B is for level 7.
    Do you know how to releaze this in Webi side?
    In the 3.X version, we have different dimension for different level.
    But now in BO 4, it has been combined into one\
    Thanks and best regards
    Alex yang

    Hi,
    You can still do this in BI 4.0, if you use the old 'legacy'  MDX OLAP.unv from Universe Designer tool .
    Yes, with the BICS connection,  you are getting a native hierarchy, as it would be displayed in an OLAP environment.
    Cheers,
    H

  • OBIEE report from multiple facts at different levels

    Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
    After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
    I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
    Thanks in advance.

    Hi Vinod,
    The scenario provided in the link above doesnt match to my issue.
    We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
    I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
    F1 is tied to dimensions D1,D2,D3,D4,d5
    F2 is tied to dimensions D3,D4,D5, D6 and D7.
    In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
    So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
    and then does a cross fact join out of box between 2 queries.
    But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
    Thanks.

  • Different movement types in MM documents in SSR

    Hello,
    How can I use different movement types in logistic documents for meter readings?
    I set up additional meter event for own consumption and I need to get logistic document with other movement type (as standard we running creating logistic document types an 251/252 movement types for fuel sales).
    To realize at least those two types of sales wehave only two possibilities in the system:
    1. Setup separate processing profile for location for purpose of own consumption.
    The stop over point is only one processing profile can be assigned to the location at once.
    2. Setup a new process with new movement type.
    The stop over point - restriction in the customizing - only one main process can be used for posting based on meter readings (error message OQ_C601 "More than one entry selected as main MM process for location indicator 01").
    How can I solve this issue?
    Thanks and KR,
    Sergey

    Solved

  • My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

    My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

    Use different email address (gmail?) just for FaceTime and Messages.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

Maybe you are looking for

  • Any way to compress or simplify imported PDF file made with autocad ?

    Hello guys I'm working on some layouts for property developer, and the architect who prepare all the floor plans, elevations etc... gave me bunch of PDF files, which I find really hard to use. These are vector files, fairly small, from 500kb to 1mb,

  • Emails are downloaded into wrong folders

    I view my folder pane unified, and have 10 accounts. As far as I've seen so far, - some incoming emails go into correct inbox, while others go into Drafts. - some trash is in Trash, but in Drafts as well. - emails backed up as I compose them normally

  • Creative usb xfi issue with with traktor in windows 7 64bit

    ;ccreative usb soundblaster x-fi does not work with traktor pro .2 when windows 7 64bit is installed. traktor only recognizes 2 channels when it should recognize 4 channels from the external usb soundcard It works fine with XP but not in Windows 7, I

  • Range partition by a virtual column derived from XMLTYPE

    I want to create table and partition it by interval partion (range partition) on a virtual column which is derived from XMLTYPE i get ora-14513 error. create table dicom_archive_virtual id integer not null primary key, parent_id integer, -- where thi

  • Inbound Goods receipt - IDOC WMMBXY/WMMBID02

    I am able to post a GR with WMMBID02, but the status msg 53 only says 'Application document posted'. Why does it not provide the document number in message?