Different material description for RG1 register

Dear Experts,
I have a client requirement for change in material description (materialmaster) to a different description.
The description maintained in material master is for viz
SS CT BT 200mm-123-093MKO
But excise need description
SS BILLET
Where to maintain this additional description in material master and fetch the same for RG1 register.
Let me know any stranded user exit is available. If the above case is possible than also let me know what would be the bad implications on processes (like stock will not match with description).
Regards,
RB
Edited by: RB on Feb 26, 2009 6:18 PM

you either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download

Similar Messages

Different material description in one language for single material

Hi folks,
Is it possible to maintain different material descriptions (In one language-english) for a single material.
if it so how can u provide me steps.
Thx in advance,
Neelima.N

Hi,
For a single material code maintaining multiple text in the same language is not possible,
this contradicts the basic principle of consistancy.
Howevery you are free to do R&D, if sucessful please let me know.
Regards
Bikas

Different material number for SD and for PP MM

Hello
Does sap provide a functionality to manage different material number for SD and for PP MM:
We produce and stock material A . We want to be able to sell material A and B. For MM (stock) and PP, B = A but for reglementation, we need to print on the delivery document caracteristics stored at the material level.
We don't want to substitute B by A on the sale document and we want that the stock of A beeing reduced by sales orders of A and B.
Thanks
Simon

Simon,
Iu2019m not aware of any way to manage the same thing using one material number in MM/PP and a different number in SD.
What makes B different from A? From your description it sounds like itu2019s the same thing with different characteristics. Without more info itu2019s difficult to offer solutions to your problem but Iu2019d start by looking at classification and batch management so you can differentiate differences between materials based on characteristics captured at the batch level.
If you provide a little more info about the products perhaps I can help.

Customize iw13 for Material Descriptions for one time buys

Hello,
I'd like to make a customer report zpmiw13 using iw13. I'd like it to do everything the same as iw13 except I'd like it to get the material description for the one time buys to show up on the report.
I'm pretty sure this has been done before so I was hoping someone has a code sample I could look at to do this.
Somewhere in the code I need to do a select statement to find the Material Description in EKPO(?) when the Material Number field is blank (one time buy = no material master record).
Any help?
Thanks,
Matt

In this case we are going to use iw12 to show the data.
Thanks,
Matt

Material description for different language

Hi SAP Gurus,
Please advise how to pull material description maintained in different language ?
I need to download this material descriptions maintained in all languages for a certain type of materials of one plant.
Thanks for your help.
Regards,
Manoj

you either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download

Material form Packed, Loose is maintained for RG1 Register----where?

Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Total of opening and manufacture & Closing balance are not getting reflacted in Rg1 register.
I have checked till the date all production & issue are there in J_1IRG1 table after J1I5. After extracting the thru J2I5 only packed material is getting updated in J_2IRG1BAL table. But not the loose or unspecified material. However my clients need to get packed as well as loose material in RG1 register.
Manually in development client i changed the Losse or unspecified material as Packed by direct table entry in J_1IRG1 for testing. After doing the same when i extract the data thru J2I5, everything is coming in J_2IRG1BAL table. And getting reflected in RG1 register.
Now I have to change the Loose material as Packed material. So my problem will be solved. That is my objective.
Pls tell me how to do the change. Is any config setting or assignment?
Its urgent.
NB: helpfull answer will be awarded.
Regards
Srimanta
Edited by: Srimanta De on Jun 25, 2008 11:46 AM

Srimanta,
for better and quick reply post this thread in MM section.
Amit.

In PM order, can we change the material description for item category N?

Hi,
In Plant Maintenance work order, is there a way to change the material description while purchasing material (item category N) using a material master number? In config. the material description field is open for input. However on the work order components screen it becomes grey as soon as one enters a material master number.
Background: We want to maintain generic material master records in the system and use them for purchasing materials (item category N) on work orders so that the purchasing data defaults from the material master. But we need to be able to change the description per the specific requirement.
Similar functionality works on sales orders. Are we missing anything?

Hi there,
One solution would be to have some generic materials created and used them during work order processing. These generic materials needs to be extended to all the required plants.
Hope this works,
Cheers !!!

User exit for different Material Document for different company code

Hi,
We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
Regards
Sai Krishna

[user exit for generating external serial;
[BADI MB_DOCUMENT_BADI;
[user exit or any other enhancements during good receipt;

J2I5 Error for RG1 Register.

Dear All,
When I am running J2I5 transaction code to update RG1 Register The following error appears Plant code 1001 does not exist
Message no. 8I546
I have checked my settings for excise group and the required plant 1001 is assigned, hence please let me know what other settings I need to check or maintain.
Kind Regards
Atul

Hi Laxmipathy,
Thanks for your reply I have checked the required settings however the address is maintained there only county code and city code are not maintained in the address for plant, please advise what else could be the reason for the same.
Kind Regards
Atul

Different material group for two CO companies with same material no.

Hi all
We are implementing another CO company in COPA. The issue is that both companies use the same materials number, but in COPA grouping categories (MATKL) must be different . I was thinking in using another category, but is there another option?

Hi,
By definition the materials should have the same material group (operationg concern - same market grouping).
However, if you have this as business requirement you need to first identify a field to store this. and then you an also use exit / derivation rule to replace the value with a condition on the company code. Advantage you have reduced the use of one more characteristic in CO-PA.
Hope this helps you.
Varadharajan

Stock report for single material contains different material groups

Hi Experts,
              I have a scenario.I want to maintain material group for a material at the time of po creation.In next time i will maintain different material group for the same material.
               But I want to view the the stocks for material group wise which i entered in po.Is it possible to achieve this?
              Please suggest solution.
Thanks & Regards,
Deepika.

Please read the KBA document 2012912 - Changeablility of the field "material group" in purchasing documents
It clearly says that material group can't be changed in case you will use material master in purchase order.
So, it is clear that you can't use different material group for material master in purchase order.
For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO).

Quality info records: different pack configurations for same raw material

how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
thanks
Alisa

You need to use the MPN profile functionality that is a standard part of SAP.
In Config under the purchasing define the MPN profile. There are several options you can turn on/off including info records.
You assign the MPN profile to your material. It now is considered by SAP to be an internal material number.
You then create a HERS material type for each separate manufacturer material number you have. You only need the purchasing view for these materials. You can also create purchasing text views, classification and some others if you wish.
In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
You create a Q-info record for each manufacturer/HERS material combination.
Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material. When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot. The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
Take a look at it and research it. It's not hard to set up.
FF

Conversion of 2 different material codes into 1 material code for STO?

Hello All,
A pleasant day to you all.
I have a business scenario and I would want to get opinions on the feasibility of implementing it.
The scenraio is that the country have a new tax regulation (they call it BOI) so that when a material or product is created on a certain machine, the tax is reduced. Therefore, if there is an exactly the same product that is created from different machines, it will incur different taxes.
So, since the business has 2 company codes (i.e. Company A and Company B), the scenario would be company A will be creating 2 different material codes for this so they can track BOI products from non BOI products. But Company B on the other hand, would like to use the same material code to reduce complication. With this, Company A will then produce and do transactions using 2 different material codes then when PO STO is created (to transfer stock to Company B), Company B would like that those material codes from Company A would somehow (be automatically) converted into 1 material code on Company B's side. Is this possible? If so, how can we do that? what are the required set up to do this?
Thank you very much. Your response and opinioin would be greatly appreciated.
Best regards,
Lee

Hello Jürgen L.
Thank you very much for your kind attention and reply.
So with this, it's really not possible to do that requirement? There's really no way?
Thank you very much.
Best regards,
Lee

Error in excise duty values in RG1 register

Dear All,
While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
I have verified the following
1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
2. Sales material as well as sold to and ship to parties are same in all the three invoices.
3. Dispatch location i.e. plant is same for all 3 invoices.
4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
Please help ASAP.
Thanks & Regards
Piyush

Dear Lakshmipathi,
All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
The problem is in the RG1 register extraction.
BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
Thanks & Regards
Piyush

Excisie duty updation problem during RG1 register update

Dear All,
During updation od RG1 register, excise duty has not been updated in Rg1 register. Transactional entry updated but Exice duty/ ecs/ CEss is showing zero value.
It happened with two materials only. all excise master data has been maintained for that material.
What will be reason ?
Your valuable reply is appreciated. Thanks
Regards
Mangesh

Hi Mangesh,
I hope you are using the std transaction J1I5 for RG1 Register update.
Normally we update the RG1 Register using the material documents.
So check whether for the material documents which you updated whether an excise invoice has been created or not ? because std - J1I5 transaction doesnt check the same.
If you have updated the RG1 register after creating the excise invoice for the above materials doc's then excise value will be updated in the same.
IF its not happening then check if any SAP notes are available.
Hope its clear.
Regards,

Different material description for RG1 register

Similar Messages

Maybe you are looking for