Different material- same valuation class-same movement type - but should hi

dear all,
Different material- same valuation class-same movement type - but should hit different gl account.
the requirement is the materials are different but having same valuation class. Now during issue certain gl account are hitting because of val grp code, account modifier and account determination in mov type. Now my question is can i use same movement type and hit different gl account for materials having same val class???
It is possible??

Hi,
In OBYC, we maintain G/L account for the transaction key (for ex: GBB) for the combination of Val. grouping code, Valuation class & account modifier (ex: VBR - determined via mov.type).
As per your requirement, Materials have the same valuation class and you are using the same mov.type for Goods Issue, so only option is to use different val.grouping code (which is assigned to a valuation area).
So in short, you can trigger different G/L for the different materials with same val class, mov.type only if the Plant - valuation area is different.
If the Plant is same then system will always determine the same G/L even though materials are different.
Hope it is clear.
Thanks & Regards,

Similar Messages

Valuation class and movement type

Hi sirs,
What exactly mean by valuation class and is there any sublink to valuation class and movement type.
BSR

Hi BSR,
Regarding the meaning of valuation class and link between valuation class and movement type, you just have to understand this.
valuation class + movement type = transaction key --> GL account
explanation :
Valuation class
It is a field maintained in the accounting view 1 of Material master. This is nothing but the classification of material like Raw material, Finished goods, WP, stores & spares etc. It is indicated as numerical number.
Movement type
This is a 3 digit numerical code which is used for all material movement in MM module. Say for example movement type 101 is used for Goods receipt from vendor or from production.
Transaction Key
The combination of valuation class and the movement type translates into a transaction key which indicates the type of transaction.
remember:
The combination of Valuation Class + the Movement Type helps in determining the GL accounts automatic updates.
hope it helps and don't forget to assign points.
regards,
Lily

New GL acc for COGS with same movement type

Hi
I have a requirement where i want to assign the new GL account to the COGS simulataneouly using the existing one.
i dont want to create a new movement type.
i want to use a same movement type, same valution class.
Can this be met by using a new Acc modifier?
How can this be acheive
Regards,
DDP

HI
Yes i am talking about 601 movement type
We want to now send a existing material from different plant also.
currently we are sending it from "A" plant
NOw we want to send it from "B" plant also.
In both the above cases we want different COGS account (valuation class will remain same)
Hope this is clear
Revert in case of queries

Receiver determination doesn't work for same IDoc type but in differentSWCV

hi guys,
we have an emergency now. Receiver determination doesn't work for same IDoc type but in different SWCV.Please check below for detail.
1. The process flow is : R/3 IDoc -> XI -> Third party system
2. In previous release R13, IDoc ORDERS05 was imported and used in XI and software component version is R13. And receiver determination was created.
3. Now, in new release R17, IDoc ORDERS05 was imported from R/3 to XI again and software component version is R17. And in R17, the receiver determination created in R13 was used for both old interface(R13) and new interface in R17.
Then we encountered the problem, both interfaces doesn't work now, even we deleted the receiver condition(In R13, IDoc ORDERS05 was sent to system A, and in R17 IDoc ORDERS05 was sent to system B, RCVPRN was used as an condition).
Does anyone encounter this problem? really need and appreciate your help.
-Eddie

information from monitor:
Status Sender Service Sender Namespace Sender Interface
reschedul XXXCLNT100 urn:sap-com:document:sap:idoc:messages ORDRSP.ORDERS05
columns for "Receiver Service","Receiver Namespace", "Receiver Interface" are blank
And then double click records in monitor, go into detail information...
Normally there's lots of setps existed, such as
Inbound Message ( CENTRAL )
Receiver Identification
Interface Determination
Receiver Grouping
Message Branch According to Receiver List
Technical Routing
Call Adapter
But now there's only one setp -
"Inbound Message ( CENTRAL )" existed, no any another setp..., and payload in inbound message looks good.
And in SMQ2, I checked the queue information, found there's an error - "An exception occurred that was not caught." No any other detail information for this error.

How to default Valuation class from Item Type

Hi,
Is there a way to assign Valuation class to Item type, so that when a new material is created is created with a certain Item type, automatically the system pics the aluation class?

Hi,
Account can be defaulted from Account Assignment Category, not from Item category (if this is what you were asking?)
In the case of items with account assignment with a material master record, the valuation class from the accounting view is used.
In the case of items with account assignment without a material master record, the valuation class of the material group (see following graphic) or the valuation class ' ' is used.
Hope this helps!!
Reetesh

Finish good material not showed with 131 movement type in mfbf code in REM

Hi experts,
I am working in Repetitive manufacturing process, I have 6 operations in rate routing from which 6th operation is mile stone.
When i confirm last operation through MFBF, system shows components list with movement type 261 but finish material is not showing with movement type 131. The document no. is generated at the time of saving but in displayed document FG shows with 131mov. type and component list with 261.
Setting for REM are as follows
1. control key- pp03
2. production versions- maintained with standard REM profile
So my question is how can i see FG material in MFBF screen along with componets list ? What is the settings for this or any development is there ?
Regards,
Nitin Nerkar

Nitin,
System behavior is not wrong. What i understand from Backflush is, Back flushing is nothing but automatic goods issue. System will automatically posts the goods issue when you confirm the operations.You have no need to make manual issue. It will reduce the effort.
Backflushing is automatic accounting (Goods issues - 261 mvt) of material consumed for production, at the time of confirmation.
When you use auto goods receipt indicator then at the time of confirmation system will do auto GR. In normal discrete mfg scenario, when you are doing confirmation when you click on GOOD MOVEMENT tab you will get GI as well as GR with movement type.
But in REM scenario you doing MFBF (REM Backflush) means This activity executes multiple activities in a single step, such as: finished product goods receipt, backflush of component materials, posting of costs to cost collector and creation of material and accounting documents. When you are doing MFBF and clicking on post with correction tab it will show you what are the components going to backflush, and that is ok. Here you are not going GOODS MOVEMENT tab to display GR.
I think this SAP system std behavior.
Tara

What is a Structured Material, what does 317, 319 movement types do

Hi all,
Could you please tell me what is a structured material?
When can we use 317, 319 movement types and on what Material types?
Regards,
Jyotsna Loomba

Hi,
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
     Qty      Unit      Material      Movement type
     1      box      S      101 +
     1      box      S      319 -
     4      piece      K1      319 +
     5      piece      K2      319 +
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, (z.B. set, prepack or display) is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased.
Regards,
Biju K

Valuation string in movement types - Inventory Management

Hi,
what is meant by Valuation String. and i've seen the valuation string assigned to movement types.
for ex: WE01 and WE06 is assigned to Mvt Type 101 in account grouping.
pls list all the valuation string and explain the purpose of valuation string.
Regards,
Bala

Hi
Posting string for values
Indicates the posting rule that always contains the same account assignment characteristics for a certain transaction or event (for example a goods movement or an invoice receipt).
The posting string is needed for the purposes of automatic account determination.
Use
Through the allocation of a posting string to a movement type, the system automatically determines the G/L accounts to be updated in the event of a goods movement.
Definition: posting string
The definition of a posting rule that always has the same account assignment characteristics for a certain business transaction.
The posting string is required for automatic account determination.
These value string WE01,WE06 plays an important role in
Automatic Accoutn determnination. You have maintain in
SM30.
you have maintain in SM 30
Table T156W -Value string
T156M for Quantity string.
Whenever Goods movement (or) invenotry posting takes places we are not giving the G/L account ,The G/L accounts are taken automatically.
In real time we are not modfiying anything. it is Std SAP
If you are copying a New Movement type then you have to define the WE01 & WE06 Value String & Qty string.
you choose a value string and qty string.
The value strings controls the G/L account determination for transactions covered by the movement type
G.Ganesh Kumar

Mass change of material's valuation classes

Dear all,
Our client has an incorrect MM accounting determination because the customizing for the OBYC was not properly definied initally. This issue is causing many problems in accounting since the accounts are not being correctly determined,
After being analyzed the situation we have concluded that the best way to correct the problem is to define a new classification of valuation classes and link it to new valuation grouping code which will be assigned progressively to all the plants in the system, activating immediately the new accounting determination.
Since the system is already live,the change will need to be done directly in production environment. As you all know, in order to change the valuation class of the material we need to post the stocks of the material to an interim account in order to be able to change the valuation class of the material.
Since it would be very complicate at this point of the project (we are running out of time) to flag for deletion all the existing open purchase orders/production orders, we will switch the error message for them to a warning in the material master as suggested by the system.
And here it comes my quetion, many of the plants have WM and we are not sure which the required steps are to allow as to post the stocks to the materials to an interim account and either how to do it technically (we are talking about 50.000 materials).
Any suggestion will be very appreaciated.
Thank you very much for your help!!!
Luis

>
Clemente79 wrote:
> - I forgot to mention that we also have QM and PM. I assume that for QM we would need to check all the materials with >inspection lots, and process them in order to transfer the stock to unrestricted use, but is there any way to do it massively?
there is always LSMW
>
Clemente79 wrote:
> For PM, I am not sure whether there is any equipment status which might prevent us to issue the materials, do you know it?
> - And finally, I assume whether we have any special stock status, like reserved or consignment, we would need to transfer to unrestricted use via standard logistics movements, am I right?
not sure of PM, you might want to ask that in the PM forum ... but i should think, that if you stopped all posting during that process there should not be any impact with your equipments ... or do you have something special going there with BOMs/configuration?
special stock: i would do it that way.
i appreciate the invitation, btw.

Material Master-Valuation class

Dear Friends,
Depends upon the material type valuation class value is fetched by the system......Can any1 explain how this happens?......where it is assigned?.....whrs the link?.......Thanks in advance......

Hi saravana
Following the configuration path:
IMG>Materials Management>Valuation and Account Assignment-->Split Valuation without wizard
Here we will be assigning the valuation grp to the plant and give the G/L account also
Check the t.codes .OMWD, ,OMWB where assignment is done. Because of this only the valuation class will come in our MMR ->accounting tab 1
Regards
Srinath

Material groups, valuation classes and GL acccounts

HI Gurus,
I need to setup new material groups with descriptions, valuaiton classess and their related GL accounts. What steps do i nned to follow.
PLease explain '
Thanks
Anusha

Go to transacition OMSF to define the material group
Go to transaciotn OMSK to define the valuation class
here you can define or use existing A/C ategory reference than create valuation calss and assign the A/C category to that valution class and next step you can assign the material type
G/L account you can define in FS00 transaciotn and you can assign them to the valution class in OBYC transcation.

Material groups-valuation classes combination

Hello,
I have material groups which are created for services, and they don't have a material code. When I purchase these materials, I enter the cost center as account assignment type, and the service I'm purchasing and the material group I mentioned for these services.
Below, it asks the GL account. In order to avoid entering this GL account every time I purchase services, I want to combine these material groups to the valuation classes. And then those valuation classes and GL accounts will be combined in T030 table.
Where could I do this combination through customizing this matching of valuation classes and the material groups?
Thanks in advance
Irem

Hello forum!
I customized a specific material group with a valuation class (transaction omqw).
During a PO creation, the GL account is displayed by default when i enter a blank material and the material group that i previously customized.
However, if I enter a material code with the specific material group, the field of the GL account is empty.
Do you have any suggestions in order to have a default GL account at PO in the case that the material has a code but it has no valuation class?

IDoc processing for same message type but diff extensions

Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

Procured material - incorrect valuation class

We are version 4.7 with purchase accounting active in our company.
Following is the issue faced by us.
We have a single material code for both procured and manufactured item.
In the material master the valuation class entered is that of
manufactured.
When we create a GR with respective Purchase order (whenever it is
procured) the accounting entries generated are incorrect. They are
based on the valuation class entered in the material master (which is
manufactured) and GL codes are derived from OBYC assignment.
Kindly suggest how a single material can work for manufactured as well
as procurement and error in accounting entries generated can be
rectified.
Satish

Hi saravana
Following the configuration path:
IMG>Materials Management>Valuation and Account Assignment-->Split Valuation without wizard
Here we will be assigning the valuation grp to the plant and give the G/L account also
Check the t.codes .OMWD, ,OMWB where assignment is done. Because of this only the valuation class will come in our MMR ->accounting tab 1
Regards
Srinath

Change the inspection stock of material 16 in QM only Movement type 105

Hello,
I am trying to do GR with Movement type 105 and gettig the error message " Change the inspection stock of material 16 in QM only"
When I change the stock type from Quality to Unrestricted during 105 movement type, then I do not get this error message.
Scenario : I want Inspection lot to get generated with movement type 103 and not with movement type 105. And with my current settings, Inspection lot is getting generated with 103 and not with 105.
I want that, if I do GR with movement type 105, then the stock should go directly to unrestricted stock and not to Quality stock. BUt currently, it is giving me above mentioned error message.
Thanks and Regards
Prabhjot Singh

Can you explain your business scenario.
Here is how standard SAP process is
1. Use movement 103 movement to receive PO in GR blocked stock
No inspection lot is created
2. Move material from GR blocked to own stock using 105 movement
This movement is identical to 101 movement. SAP will create Inspection lot if QM is activated.

Different material- same valuation class-same movement type - but should hi

Similar Messages

Maybe you are looking for