Different Music with One Slideshow

I'm putting together a DVD of a short film using DVD Studio Pro. I want to include a slideshow of behind the scenes pics on disc. I would like to give folks the option of choosing if they'd like to watch the slideshow with either music from the original score or one of two pieces of pre-existing music used in the film. The three pieces of music are of differing lengths. Can I do this without creating three different slideshows (which would use a lot of disc space)? If so, how?
Thanks.

Hi Robin
There won't be an onscreen button. If the viewer presses the Audio button on their DVD remote they'll be able to select which audio track.
You could either create an audio select menu to point people to which track they'd want OR clear onscreen instructions in the preceding menu as to how they get from Track to Track.
As a precaution ensure that your audio tracks are all same length so you don't have any gaps when it's played.

Similar Messages

I have 2 macs w/different music with one iTunes account

can I use both machines on the same account, or do I need to have separate iTunes accounts for each machine for Genius to work properly?

I have 3 emails and 3 devices. I just want to be able to share the purchased music/apps but keep pictures/contacts etc separate. Is this possible??

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

Apps for different clients with one creative cloud license

Can I publish apps for different clients with one single edition license on creative cloud?

Well, "should" is about as good as it gets, no one is going to enforce that, and it's certainly making me think very very hard about whether to bother with a pro licence again in August!
And yes I'm very much aware of the few advantages of the Pro Licence, I do need to see some much bigger differentiators to justify the extra cost though!
Just putting cards on the table :-)
Alistair

Music with new slideshow feature in iphoto 6

First of all where did the old feature of clicking play for a quick view of your pictures go? Secondly when I create a slideshow the music (itunes icon) won't let me select songs from my itunes if they are in a folder--if I click on recently added or even library --gone is the ability to then chose a song from that folder?
any ideas?
thanks

It's been replaced with the Play button at the bottom
of the Organize/thumbnail window. It allows you to
play a slideshow, with the slideshow options, of any
photos you've selected without creating a slideshow.
It's the old quick play button on steroids.
blockquote align="left">
Part of my question has been answered. I just made my iphoto screen bigger and voila --podcasts and play button appear--so that is solved --thank you
However I still can't select the song I want to play with a slideshow. If I'm in settings and I go to music and click on the library folder in the list it gives it doesn't then show me all of my songs? If i click play it will play the first song in my library?
thanks for your time
wv

Can I sync 2 different iPods with one Computer

I want to buy a second iPod (Shuffle) and synch it with part of my content in iTunes. Is it possible?

Welcome to Apple Discussions.
Of course you can. I use 2 minis and 1 shuffle with my computer, and I am going to get a nano too.
Check this: Using Multiple iPods with one computer

How do i synce two different ipods with one computer??

i recently purchased an ipod 5th generation for my other half which i have set up an account for and comes up when i plug in but the home page always comes up with my ipod stuff which is a 4th generation ipod. i have no problem with mine as it stores songs etc but when i plug the other one in it deletes whats on there and i have to manually tick all the songs again to sync back on to it. is this normal?? i am using a windows xp and have no issues with the computer and my ipod just the other one. i also have updated itunes to itunes 9 so the 5th generation ipod can download stuff. it seems to store songs and then when i go to download or update it takes them off and am back to square one!!!! please help!!

Is the following document of any help with that?
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

Can't play music with a slideshow

I've only had a problem adding music since I've upgraded to Maverick on my desktop. Did I miss something ? I go to the music tab for the slideshow, select the track I want from I Tunes libruary as before, select play. The slideshow starts with no music. I check the volume level is set high, but nothing. I've tried closing Iphoto then reopening but no change. Any idea's ?

In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out.

Can't put music with a slideshow...

Alright . . . Using iPhoto 08 version 7.1.4. I am attempting to make a new slideshow, but when I attempt to open the 'Music' option, nothing happens. Old slideshows that I have made will play with the assigned music, and the new one will use that annoying default tune. But alas, I cannot open the music option for any of my slideshows. Help!
(I recently updated iPhoto - aside from that I don't know what might be causing the problem. I have tried restarting my computer, but come up against the same problem.

Welcome to the Apple Discussions. First try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again.
When you click on the music pane do you see the iPhoto Library icon? If you only see the folder with the default audio look for a small dimple in the horizontal frame and drag downward.
See lori's screenshot links in this thread: http://discussions.apple.com/thread.jspa?threadID=446667&tstart=0.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How to control two different processes with one DAQ output board

Hi! I posted this in the Signal Generators forum, but I'm reposting here in case someone on this board has suggestions for a way to get around my problem programmatically (ie. within LabVIEW). Thank you for any help you can provide.
Patrick
I have a PXI-6722 8-channel, 13-bit analog output board, and with this I want to independently control both the temperature (thermometer excitation/heater control) and magnetic field in my experiment. Unfortunately, it appears that I cannot do both simultaneously, which is totally unacceptable for my application.
Currently I'm using separate VI's for field and temperature control. This is the start of the problem, because in DAQmx you can't have 2 output tasks on the same card at the same time. In order to remedy this situation, I used MAX to create a global task containing all 8 13-bit analog outputs. However, it now appears that each time I do a write operation on this task (from whichever VI) I must write to all of the task channels, rather than just the channels I want to change. This would be fine for the temperature controls as they are of the type "set an output voltage value and hold it until told differently," so I could re-write the currently held values for channels that are not being changed. Magnetic field control will not work in this way, because we need to do very smooth field sweeps which require an analog waveform to be sent and sampled at a high rate (so that the steps are as small as possible). So if, for example, a thermometer's excitation voltage or a heater's power need to be changed during a field sweep (as is often necessary to maintain a constant temperature, via PID), then the sweep will be disrupted, potentially causing a dangerous magnet quench.
Does anyone have any ideas on how I could make this work? It seems very wasteful to buy a second output board when I still have lots of free channels on the first.
Thanks,
Patrick

I'd probably create a third process that just updates all output values on the card whenever necessary.
One way is to send messages via queues from the temperature and magnetic field control routines to the third process. The third process doesn't do anything unless it gets a message from one of the two other processes. The message should contain the channel task ID to change along with the new value. Use the LabVIEW queue VI's, using a type definition to specify the message type either when you create the queue or use the variant VI's. Once it gets a message, it updates the changed channels, not modifying the others (use a shift register to store an array with the current set of output values).
Hope this helps.
Jason

How to implement two different websites with one section that has the same content?

I have two sister websites, each for a separate but related department in a hospital. On each of these websites, I have a main tab called library, which has about 30 pages within it for related healthcare issues. The library is the exact same content on each site, but the main navigation and header for the site is obviously different. I have been upkeeping this identical content on both sites (if something is changed, then I have to do it twice). This isn't efficient and I would like to find a way to combine them somehow. I don't have a ton of experience but I catch on pretty quickly and I basically need ideas for the best way to handle this. I have considered creating a third site, and the library tab on each of the other sites would take you to this new site. I have also wondered if there is a way to embed duplicate content into two separate pages (maybe with an iframe). That way I would update the original file and it would be updated on both sites.
The sites also have different body sizes. One is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you all recommend I handle this? I use Dreamweaver CS6 and my pages are all HTML

I looked into Server Side Includes and I think I would like to try it, but I can't seem to get it working. The problem is both of my sites are under a separate domain but hosted the same way I believe. For instance, I have two dreamweaver sites, but when I use my FTP, I have one large folder for the main site, then the sister site is in a folder within the main site folder. Although you can get to the main site using www.ukneurology.com, you can also get to the site using kyneurosurgery.com/neurology/index.html. I think this is what is messing me up because I can't seem to get it to work right.

3 different IDs with one Skype account?

Hi,
I'm trying to sort out a mismatch with my Skype-ID, Microsoft-ID and mail address. I don't get it, please help me to understand the underlying system.
The first IDs I get aware of is when I start Skype and click onto the symbol in the upper right corner, which brings up charms bar. On top of the charms bar I read "Peter Smith" and "peter.smithAThotmail.com" (all names are for demonstration purposes). Next I click on "Account" at the bottom of charms bar, which launches IE and a page called "My Account". There again I see "Peter Smith". But when I click on "Logoff" in that page I'm presented with a logon screen (for the purpose of an immediate relogon) - and this is preallocated with "Batman96" as "Skype-Name". And that's not all: Clicking on "Forgott password" I get an email for resetting it. And when that email arrives it says "Hello jack.miller96"!?
How can I achieve
a) that I'm similarily am "Peter Smith" in Skype and Windows and the associated email address is [e-mail removed for privacy and security],
b) get rid of "Batman96" and "jack.miller96"?
I know that there are some persons named "Peter Smith" in the world. But finding me in Skype should be no problem, because the search in Skype directory could be narrowed down to home town, date of birth etc.
Could someone please explain how to achieve this?
Thanks in advance,
Stefano

I think it should work fine, as long as you give the sites different names.

ITunes on different computers with one external harddisc

The iTunes music folder is on an external hard disc. It should be used on two Computers. And the contents of the librarys should be the same.
Though the iTunes music Folder is set to the external disc,iTunes is not able to find the files. Why ?
- If the external folder is imported all files appear twice ...

If you're using the command in the Advanced preferences to set the iTunes Music location, that doesn't transfer the music unless you use the Consolidate command, and never transfers the iTunes library files, so a different computer will have a completely different set of library files.
To have a common set of library files and content, you need first to be using iTunes 7. Drag the entire iTunes folder (containing the iTunes library fles as well as the iTunes Music folder) to the external hard drive.
Then hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location. Move the hard drive to the second computer and repeat.

How can I combine post to two different tables with one form?

I am trying to create a "phantom" record in a table to be used later in a report. How can I create a form and properly $_POST to two different tables? Thanks for any suggestions!

In POST processing, just do the insert to one table, followed by the insert to the second table. I don't understand where you are getting stuck.
Sometimes when we do an insert, we need the auto-generated ID from the newly created record as a "foreign key" for the record created in the second insert. MySQL has a nifty solution for that. The specific code depends on whether you are using the mysql, mysqli or PDO database connection.

Music with photo slideshows

My apple TV plays my photo as slideshows, but it won't play music at the same time. I have been to settings, and it says the music is off, but the remote won't switch it on. Music from my itunes library plays fine. Am I missing something?

You are looking at the settings for Photos in general. Go to shared photos and where you see your albums, select settings there. here you can select which itunes playlists you want as background music

Different Music with One Slideshow

Similar Messages

Maybe you are looking for