Different ports for web/app servers

Is it possible to configure weblogic server to act as a webserver and app server
with different ports. like 80 for web server and 7001 for app. server?
Thanks in advance.

"OM" <[email protected]> wrote:
>
Is it possible to configure weblogic server to act as a webserver and
app server
with different ports. like 80 for web server and 7001 for app. server?
Thanks in advance.

Similar Messages

Making PI listen on a new/different port for http

Hi,
I have a requirement where we are exposing PI to the internet for some webservice calls. We have firewalls/dmz/gateway etc in the picture.
One part of the problem is that, for requests coming into PI, we need PI to listen on a different port for https, say 446.
How do I go about setting this up in PI?
Thanks,
Harsh
PI 7.1 EHP1

Changing of the web port for https can be done in the general server/port configuration of your PI System.
You can look at the port configuration with transaction SMICM on your ABAP Stack .
http://help.sap.com/saphelp_nw70/helpdata/en/ac/8f813a34872769e10000000a114084/frameset.htm
This is a starting point for reading about the topic. The settings itself can be done, for example, with RZ11

Installing multiple web/app servers

Hi all.
Hope someone can help out with this (BPC 5.1)
We have a live environment with 2 SQL boxes (clustered), plus 3 Web/App Servers which are all configured to go through a load-balancer.
I'm trying to setup a DR set of servers, and have built the clustered SQL boxes, plus 1 Web/App server.
Trouble is that I don't yet have a working load balancer on that site.
My questions are:
Do I need the load balancer setup first, then enter the LB address in the "Reporting Server", "Web Server" and "App Server" boxes during BPC install?
Would the lack of a load balancer prevent me from setting up more than one Web/App server, as the 2nd one just hangs about 3/4 of the way through the BPC installation and tells me nothing.
Finally, if the answer to the first question is "yes", will I have to uninstall/re-install BPC, or can I just change the settings in Server Options?
Thanks
Craig

Thanks Carlos
I've now sorted the problem.
For anyone else attempting the same thing:
The load-balancer MUST be referred to by DNS name (e.g. NOT by IP address)
The load-balancer name is entered in the following fields in Server Option on the App Servers:
Reporting Services Server Name
Reporting Services Server External Name
Application Server External Name
Application Server Virtual Name
Web Server External Name
Web Server Virtual Name
Then, once you hit Update on your second App server, you wind up with over 50 rows in the tblServerInfo table (within the AppServer database).
This needs to be backed up, all rows deleted, then go into Server Options on one of your App servers and hit "Update" again.
That way, you get just the normal 32 rows in the table again.
Hope that helps (and makes some kind of sense)
Craig
Edited by: Craig Aucott on Jun 30, 2009 11:18 AM

How to configure Mail to use different ports for POP and SMTP?

I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.

Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots.

Custom module templates for Web Apps

Just wanting to see if there's anyone out there who knows if the custom module templates from the September release are available for Web Apps? I can't seem to get them to work.
When placing {module_webapps,8168,a template=”/custom/wap-contract.tpl”} I get a "No Items Found" response. I would appreciate help as this would be very useful in building Web Apps and I can't find documentation on it
Thanks

They do work with Web Apps, I've been able to use it successfully. Here is the only documentation I can find on it so far:
http://helpx.adobe.com/business-catalyst/partner/using-custom-templates-modules.html
Curious though, when you get "No items found" that means there are no web app items to show. So we don't really know if your custom template worked or not. If you can get some items to show up and they use the default layout, then we know something is wrong.
Hope this helps,
Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

JavaHelp for web app?

Hello,
I'm trying to include JavaHelp for our web application.
Has anyone used this tool or any other tool with javascript for displaying help for web apps?
I tried to follow the browser demo that is in applet and comes with javahelp zip. It worked fine for me, but when tried to follow the same setting for the web application, I am getting this error.
java.lang.NoClassDefFoundError: Could not initialize class com.inmedius.mentor.support.amecr.JavaHelpApplet
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I know it cannot find the class, but I'm not sure how to configure it.
I have the following call to applet:
<Applet WIDTH = 26 HEIGHT = 26 codebase="http://tetra:80/AMECR" code = "com.inmedius.mentor.support.amecr.JavaHelpApplet.class" archive="AMECR.war">
     <PARAM NAME = HELPSETURL VALUE ="AMECR/GAPIHelp.hs">
     <PARAM NAME = HELPSETNAME VALUE ="GAPIHelp">
</Applet>Also, since applet approach is not that much favored, do you know if any other way to include this tool within web applications or any other tool that would do the same thing?
Any input is greatly appreciated.
Thanks,

Yes, as long as you conform to what the HelpSet specifies you can use Servlets / JSPs.

Problems with "save for web" app low quality messed up images

Please help I have never had a problem with the "save for web" application before (over three years) I am currently running A.I. cs3 on windows vista. in the past whenever I save anything this way the images were always clean. as of yesterday everything I try to save through the save for web app the images are very low quality all the vector has jagged edges, it is very low rez looking and the file sizes are very small, half the size they normaly would be. What did I do to change the settings or better yet how can I get it back to the way it was.

Thank you for your help I moved the folder but it still did not fix this problem. it is also not just the jpg option under the save for web app but all the setting ie. gif, png, ect. ect. Also the the files sizes are much less, example I exported a design as a jpg with the quality setting about 6 the file size was 374kb when I exported the same design through the save for web app the file size was only 45 kb on the quilty setting of 100. further more in the preview screen of "save for web" the original images as well as the optimized both look messed up. The "save for web" app has always worked for me in the past never a problem and I use this app alot so it is very important.

Dynamic Logical Port for Web Service Client

Hi *!
We want to use the same Web Service Client code with different Web Service instances running on different systems. So I need to configure the logical port (especially the URL of the endpoint) dynamically at runtime.
Please give me a hint, how this is done.
(we are using WebAS 6.40 SP7)...
Thanks in advance,
Frank

Hi Frank,
I hope you were able to solve your issue on you own in the meantime.
I was looking for the answer to this question today. This was the only thread I found on SDN. Unfortunately, it did not contain an answer yet. I was able to figure out a way to set the endpoint address dynamically after searching help.sap.com and after examining the interfaces offered by the Stub (logical port in this case) classes.
Here's an extract from my code:
// Connect to JNDI context
InitialContext ic = new InitialContext();
// Get reference to web service proxy from JNDI context
Z_MSC_GET_SCHEDULE_WSDService service =
(Z_MSC_GET_SCHEDULE_WSDService) ic.lookup("wsclients/proxies/iot-online.de/msc~srv_ejb~proxy/de.iot_online.msc.proxy.ScheduleReaderProxy");
// Get reference to logical port from web service proxy
Z_MSC_GET_SCHEDULE_WSD logicalPort = service.getLogicalPort();
// Set URL of web service Endpoint
logicalPort._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, "http://<FQDN>:8010/sap/bc/srt/rfc/sap/Z_MSC_GET_SCHEDULE_WSD?sap-client=100");
This is explained on
http://help.sap.com/saphelp_nwce10/helpdata/en/45/113a1221337249e10000000a155369/frameset.htm
You can also set the credentials (username / password) with the method _setProperty.
Best regards
Christian

Storage for web apps/cloud services in multiple datacenters

Hi all;
We're setting up our system so we have stage & production in a U.S. datacenter and production is EU & S/Pore datacenters. In this case do we have to have a distinctly named storage account for each of these locations?
And if we do have a distinct storage account for each datacenter, what is the downside to Locally Redundant Storage? If the datacenter goes down yes the storage is unavailable. But the web & cloud servers that hit it are down too so is there and negative?
thanks - dave
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

Hi dave,
>>In this case do we have to have a distinctly named storage account for each of these locations?
You could use one storage account, but you may need spend on the data transfer across data center, see the price page:
http://azure.microsoft.com/en-us/pricing/details/data-transfers/ . I suggest you can use different storage account for different locations.
>>And if we do have a distinct storage account for each datacenter, what is the downside to Locally Redundant >>Storage? If the datacenter goes down yes the storage is unavailable. But the web & cloud servers that hit it are >>down
too so is there and negative?
For this issue, Locally redundant storage stores multiple copies of your data synchronously within a region for durability. But all copies is in one region. In other words, LRS could replicated the data copied in one data center. If the datacenter
or storage is unavailable, I think it may be downgrade the performance. If you are worry about Azure storage data, I suggest you could consider the geo replication. GRS's secondary locations is in other datacenters.( see this blog
http://blogs.msdn.com/b/windowsazurestorage/archive/2013/12/04/introducing-read-access-geo-replicated-storage-ra-grs-for-windows-azure-storage.aspx#_Locally_Redundant_Storage ).
Also, Azure guarantee storage read/write at least 99.9% of the time,we will successfully process requests to handle data from Locally Redundant Storage (LRS), Zone Redundant Storage (ZRS), and Geo Redundant Storage (GRS) Accounts and Read Access-Geo
Redundant Storage (RA-GRS). Please see this (http://azure.microsoft.com/en-us/support/legal/sla/ ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dynamic Host and Port for Web Proxy

hi,
When I create a web proxy in JDev I supply the hostname and the port for the web service. The code is then compiled and then deployed. However I want the host and port to be dynamic (kept in a varaible) so when I move my deployment from Development to Test server I just need to change a value in a database or text file. I don't want to re-compile and deploy the code when I move servers. Is there any way to do this??
Thanks
Stephen

Hi,
not so in the WSDL file that is created. If from the client side access, then WS poxy classes allow you to do this
Frank

Detail on High Availability options for Web Apps

Hi,
I do really struggle to locate actual information on Azure Availability offerings / capabilities...as an Infrastructure Architect it has bugged me for years now with Azure offerings!
Something that simply states the availability within any local DC and options for true HA over 2 or more DC's.
We are moving away from using Web Roles to Web Apps for solutions for our clients. I understand the principles of fault domains, etc. with Web Role requirements for min. of 2 to (mostly) avoid MS update disruption within a single DataCenter, but cannot locate
similar info. with regard to Web Apps.
Really appreciate if someone could point me to some appropriate detail as I've failed....
(Also, cannot find anything on DocumentDB....)
Many Thanks,
Lee

Hi,
High Availability of a running service always comes with a cost, and priorities will be app-specific. If it's the web tier, then you may indeed want to consider hosting in multiple geo's. If it's a backend processing tier, sometimes it's "ok" to
let a service go offline, as long as requests are queued up. If it's the storage system (preventing queueing of messages), perhaps an alternate queue in a different data center could be available for redundancy purposes.
I would request you to check this article:
https://msdn.microsoft.com/en-us/library/azure/dn251004.aspx
Hope this information helps.
Regards,
Azam khan

Login prompt appears for web app when sql db is not on same server as WebAp

Hi,
I am deploying a VS2005 web application on a server (which has crytalReportsviewer); lets call that server A. The database the crystal reports access are on a different server, server B. In this scenario, when I run the web application, and try to bring up the reports on the web page, I get login prompt. Even if I provide valid login credentials (I have set up a user for this purpose the behavior is erratic; for some reports the report is displayed and for others it errors out with 'unknown error' message.
If I put the sql db on the same server, it works fine.
I use the crystal reports application to update the database source. When I do this, I use Ole db connection and set the 'integrated security' to true. But setting the integrated security to true does not bypass the login screen on the web app.
My question is, how do I set up the report database parameters (connection string etc) so that the user of the web application does not have to go through the login screen when the web application and the sql db does not reside on the same server.
Thanks.

That sound like a [Double-Hop|http://blogs.msdn.com/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx] issue.
You'd install and configure Kerberos to hop over the credentials - see post: SQL Server 2005 integrated security.
Sincerely,
Ted Ueda

Necessary ports for Web Conferencing in Oracle Collaboration Suite

Hi everybody!
What ports are necessary for opening to ensure the functioning with Web Conferencing in Oracle Collaboration Suite 10g (on a computer of the client and a server)
Thanks a lot for your helps.

Hi,
If it's all configured properly on the server, you'll only need whatever port is configured for SSL on the middletier webserver (standard is 443) for actually running the conference - the web application used for scheduling etc. might use a different port but would usually be the same in a well configured environment.
regards,
Richard

Single Reverse Proxy and multiple Office Web App Servers

Hi all,
I have recently installed a new office web apps server pool in my new location and configured it in my Lync topology as well.
I have a single Reverse Proxy (IIS ARR). Inside my Reverse Proxy I have created a new web farm for my new web apps server. The configuration of old web apps server. I have copied the settings from my old web app's web
farm in IIS including its Inbound rule regular expression.
Now when I try to upload a powerpoint as an external guest hoping to hit my new web apps server, my reverse proxy tries to hit my old office web apps server and no traffic is sent from reverse proxy to new web apps.
my reverse proxy shows the health of the new farm as healthy.
should the inbound rules be different for these farms in reverse proxy?
Any suggestions are welcomed.
Thanks,

Hi,
In addition to Luca's comment in order to determine if the farm is actually working correctly in the first instance, did you disable or remove the old server farm?
Can you also confirm that there are no static routes in place on the IIS ARR box?
Kind regards
Ben
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.

SharePoint 2013 Multiple authentication prompts for web apps

We have multiple web apps for MySite, collaboration portal and search centre. When users click on different URLs and access different portals non IE browsers prompt for credentials multiple times for
each Web app.
Is this some thing to do with
kerberos delegation set-up?
http://technet.microsoft.com/en-us/library/ee806870(v=office.15).aspx
sudesh withanage

This is basically the way its designed to work. Kerberos will help with authentication between different site collections on the same web app, but not different web apps. Since you have multiple web apps Kerberos Delegation of credentials does
not apply. It only happens on non-IE browsers because IE can be set to pass the OS credentials in the background by default. For other browsers you normally have to save a web site's credentials.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Different ports for web/app servers

Similar Messages

Maybe you are looking for