Different production good receipt interim storage type by workcenter

Hello,
When a semifinished material is produced and 101 movement is performed, material is located at interim storage type 901.
As each workcenter is responsible of staging material produced on his area, in order to have an accurate control of the materials that are still pending of staging in a workcenter, we want to have a different interim storage type for each workcenter.
How can we achieve that, without using different movements types for each workcenter?
thanks a lot for your help,
Hannover,

Hi
Pls analyse the below mentioned scenario whether its suitable for your business process
In case if you receive a particular material X from work center A and material Y from work center B , that is what i meant to say is if there is a clear demorgation between materials from a particular work center (Material X will be received only from work center A not from any other work center) then you can use the special movement indicator in the material master and in the ref mvt type-WM mvt type linkage you can mention the special mvt indicator for a WM mvt type and assign the relevant storage type in the WM mvt type level config settings
In this case you need to create multiple WM mvt types not ref/IM mvt types and assign different interium storge types to the relevant WM mvt types.
Regards
Amuthan M

Similar Messages

Interim Storage Type Configuration

Hi All
I want to find out on interim storage type configuration, if it is possible and flexible in that you are able to configure it in such a way that you are able to separate the movements into the storage types according to the diffrent commodities (material types) and within those commodities, you can separate/filter your gains, losses and adjustments. What I am looking at, at the end of the day is to be able to pull through a report of interim storage type where I would be able to see all my losses, gains and adjustments in terms of quantity sitting on the interim storage type.
Regards
Khuselwa

Hi
I am not sure what you want to see as stock in interim st types are not neccessarily gains or losses.
Interim st types are used in SAP to recognise that some stock exists and needs to be moved such as 902 for goods receipt or 921 for stock transfers.
If you have gains or losses which are created by adjustments you can use the 'Reason For Movement' field when you create the gain or loss (this field needs to be congigured) and then you can run a report MBGR to see them.
I hope that this helps

WM-PP : Backflush a material from different bins in the same storage Type

Hi Gurus,
We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
Thanks
Kris T

Look like it's not possible using the SAP standard.

Bins in the interim storage type

Hi
The client has a requirement where the interim storage type 902 (GR Area External Receipts) needs to be bin managed. i.e. it should be possible to select the bins manually. Std. system has PO no. as dynamic bin. Is this possible? If yes, how??
Thanks in advance
DB

yes, this is possible..
Check the documentation(sap library) on this for details..

Why do we need Interim Storage Type ?

Why do we need Interim Storage Type ? If you say it's acting as an intermediatary buffer location... Then why don't we need any Interim Storage for Bin to Bin stock movement??
Any pointers will be appreciated .

You have answered the for your question number 1.
I am going to answer for your question number 2:
We usually have interim storage bins in interim storage types. But these will disappear after the stock moved from interim bins.
This interim storage type/bin concept is created to map the real business process. Let's talk about the examply GR from supplier. Usually,
Warehouse personnel, unload the stock from truck and keep a place called staging area. This is in SAP called Interim storage area.
At this time, transaction is completed for IM side, Ie the material document is created and MM-WM trigger point TR also created. and depends the SAP config settings, this TR may be converted to as a TO and waiting for the confirmation.
Hope it helps.

List of standard Interim storage types - WM

What are the standard Interim storage types
In my system people have created few starting with 9 hence not able to diffrentiate which are standard and which are non-standard
Thanks

The Standard Interim storage types starts with 9**.
In the table T331, the below fields will have 'X', which shows everything is allowed.
MISCH - Mixed storage
ZULAG - Addition to stock
NEGAT - Negative stock qty
LENVW - Storage Unit Management (will be empty)
The reason for the Storage Unit Management will not be selected was the HUS can packed and repacked with no restrictions.
I hope you can find the difference based on that.

Are Interim Storage Types HU managed?

Hi, Please let me know if interim storage type can be HU managed? How can I do this?
Any help on this will be greatly appreciated.
Thanks.
with regards,
Muthu Ganapathy.

Hello Muthu,
In the same path as above, you will find the "Define storage type" node.
- Execute that node
- select the storage type for your warehouse.
- on the bottom of screen, you will find "HU picking control"
- Select the appropriate option.
This will give you fair idea about HU in Warehouse.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOHU/LOHU.pdf
Hope this helps
Regards,
Arif Mansuri

Putaway quantity does not show in Interim Storage Type 916

Hi all,
It could be a silly quesiton however would need your help with the issue below.
When I create Picking TO from Outbound Delivery, usually I will see the Pick Quantity from Source Storage Bin and Putaway Quantity showed in Interim Storage Type 916. However, for the warehouse I'm working on I could not see the Putaway Quantity showing in Sty 916, only Picking Quantity displayed from source storage bin.
For example, I created picking TO# 17439 to pick stock from storage type 001 to destination storage type 916. Here I only see the 'Pick Quantity' showing in storage type 001. I don't see 'Putaway Quantity' shows in Storage Type 916.
Would appreciate if anyone can provide some advices. Thanks.
Khanh Ngo

Hi Jurgen, I have cancelled the TO above for some other tests. I have created a new delivery, please see the new TO#17442 with LT21:

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

MIGO Goods Receipt multiple Movement Types?

Hi,
Is it possible with MIGO Goods Receipt using Inbound Deliveries to have multiple movement types? the reason I ask is I am getting the following error 'BORGR622 Movement Type XXX not allowed; only 101 is allowed' when trying to receipt a Line no. with different Movement Type to the earlier lines.
We do have the same problem if we receipt in MIGO Goods Receipt directly to the Purchase Order, we can happily post a document which has the normal '101' movement type and another Custom movement type.
The reason for the requirement is to do with Account Determination, we have free bonus goods lines which are zero price on the purchase order - the price difference gets posted to a bonus stock account instead of the usual price difference account, by using a Custom Movement Type - the bonus stock agreement (kind of like BOGOFs Buy One get one free) is passed to the Customer with similar account determination updating the same bonus stock account.
This works fine for MIGO receipt directly with the Purchase Order but we get the error message above with Inbound Deliveries.
I cannot see anywhere obvious in config which might sort this issue, but am unsure why multiple movement types on a Goods Receipt would be allowed against a Purchase Order but not an Inbound Delivery.

Hi,
Try with the below mentioned settings,
goto SPRO -> Materials Management -> Inventory Management & Physical Invetory -> Settings for enjoy transactions -> Settings for good movements(MIGO) -> Settings for transactions & reference documents -> select MIGO_GR -> Click on transaction/event -> select goods receipt -> click on reference documents -> remove the tick mark on active.
Regards,
Prabu

Serial data tab page missing during Goods Receipt for Mvt type 501

I have created and asigned the Seria data profile in plant data/Storage 2 of the material master record. Now i want to do the Goods receipt of this material with Mvtr type 501 w.r.t any documents for 5 no's and want the serial number to be createdment. I also have made relevant settings for automatic serial number and equipemnt number synchr, but wen i m in MIGO--Goods Receipt OtherMvt type 501 and enter, the serial data tab page is missing..
How can I activate this tab page....Any steps missing....
Can some one throw lights on this.....
Refered relevant threads but not much useful to my query....
Thanks
Murad Shaikh

Try 501 with MB1C, OR
Check through Path SPRO -> Sales and Distribution -> Basic Functions -> Serial Numbers -> Determine Serial Number Profiles -> Select Profile 'MM' & double click on Serializing procedure at left & maintain obligatory(03) for procedure MMSL i.e. Maintain goods receipt and issue doc. Also press F1 in Serial Number Usage to read the usage.

Goods receipt Changing Movement Type.

Dear Experts
Can we change the Goods Receipt movement type(101) in the case of Deleivery of Production order By MB31.
Bcoz we r having the Same Movement type for Goods Receipt From Out side (Vendor). And From this year we want to change the movement type Sotaht we can track out the receipt of Material Through Productiopn And Also Separte From the vendor.
Rgds
Pankaj Agarwal

1. It is not requried to create a new movment type for the case of segregating the 101 mvt type..
2. Each movement type along with it -also has a Transaction event type- which help us to identify the transaction event
this should be useful to identify the same..
so better dont create new movement type..try the transaction event type..
reg
Dsk

Goods Receipt PO (Service Type) for generate accruals

Hi,
Just wonder that Service type of Goods Receipt PO possible write to the G/L or not? for item type of Goods Receipt PO, it can generated accruals.
I want to generate accruals by Goods Receipt PO., else how am i going to generate accruals?
Thanks.
Regards,
Danny

Subject is discussed in this link with no answer
Generating Accruals from Service type Goods Receipt PO's

Invoice Receipt different with Goods Receipt

Hi All
I want to Enter Invoice difference amount with Goods Receipt.
Example:
95%Goods Receipt<Invoice< 105%Goods Receipt: You can post Enter Invoice
95% Goods Receipt > Invoice or
105% Goods Receipt < Invoice: System will lock Invoice.
Could you please tell me how to configure.
Thank and Best regards,

Spro-MM-Logistics invoice verifcation- incoming Invoice - invoice block--set tolerence limit.
rewgards

Automatic Goods Receipt New mvmt type

Hello All,
For New Movement type determination during Inbound delivery
"the movement type is entered in the item category with transaction 0VLP.
which item category (and movement type) is found is based on customizing of Define Item Category Determination in Deliveries which is transaction 0184 ."
I could do this. With existing Delivery type and Item category group from material master we would like to use Item usage determining new Item category. I have efined new Item Usage also.
Del type       | Item Cat   |   Item Usage     |             New Item cateogry
EL     NORM     PACK          ZELP
EL     NORM     SLSV          ELSH
Please help me how do I control this determination based on Item Usage? Where the Item usage has to be maintained? in Scheduling agreement?
Thanks alot.
Siva Jetti
Edited by: Siva Prasad Jetti on Nov 11, 2010 3:08 AM
Edited by: Siva Prasad Jetti on Nov 11, 2010 3:37 AM

Hello All and Jurgen L
I have gone through all threads relating to subject Inbound Delivery Item category determinatio.
Doc type    |   Item C        | Usage                Item Category
EL     | NORM     | V          | ELN
EL                 | NORM            | Z                                        | ZLN ( New Item category)
I want to do the configuration with new Item Usage "Z" to determine ZLN (Custom Inbound Item Category) with same Delivery type EL and Item category from material master NORM.
Where do system detrmine this new custom Item Usage "Z" differnetiating between usage V (Purchase order) and Z ? Is it in Material Info record? Scheduling agreement?
While going through SD related Item usage I found answer that Item Usage is maintained in Customer-Material Info record
we have Control data Item Usage.
Simialrly, I am looking for a solution for Inbound deliveries where do I maintain new Item usage Z so that ZLN (Custom Inbound Item Category) is determined during Inbound delivery processing?
Thanks a lot
Siva
Edited by: Siva Prasad Jetti on Nov 11, 2010 9:35 AM

Different production good receipt interim storage type by workcenter

Similar Messages

Maybe you are looking for