Different queues in different systems - why?

hello together,
we have a qualitiy system and productiv system. We send messages (> 1000 in a short time to test queuing) through every system. The Q systems uses only 2 instances of the queues, the productiv system uses 5. The systems have the same amount of messages.
My question is: Who or what decides how many instances of queues are used for a message? Can i setup this manually (amount of instances)?
many thanks
alex

Hi,
The queue system enables one to control the flow of messages and been decided while installing or by the basis person.
The number of queues vary accordingly to the different instances of production, development and quality or might be same.
For asynchronous messages, whre u want Exactly once in order, the queue can be single while for other messages you are enabling parallel procession.
Just like the cluster node available in Adapter engine framework, same concept works for queue in SAP.
Regards
Krish

Similar Messages

Why different systems between Japan and other SEA region?

Hello
Just curious that why people maintain seperate systems for Asia (excluding SEA and JP), Japan, SEA (South East Asia), even though now all is unicode enabled?
Still, why again different systems between Japan (dedicated) and other SEA countires? (where in the Font is same)
I dont think its because of volume of business, dynamic changes in the business/governament policies!!
Thank you

Hi MSRaju_ABAP,
sometimes there may be security reasons.
But mostly these are management decisions which are not always as comprehensible as we hope.
I worked in a company with two system for the same business, one for back end purposes, one for customer interaction. Both machines were busy all day and night synchronizing their data
Regards
Clemens

Best methods for bringing media to a different system

I'm usually an Avid guy, and I am doing a FCP project that involved media that was digitized on a different system. I started a new project and imported the folder with the media and it came in just fine, but I now get an "Out of Memory" error after playing just a few clips. I've got a dual 2g G5 w/3 gigs of ram, so I guess I don't understand, any help would be appreciated.

Jeff
glad helped you get over the first issue. This next isnt quite so simple. yes, I understand that according to many who've tried it, 4.5 wont open an FCP 5 project sadly. But, if you haven't done too much work on the project in 5 other than perhaps digitise the clips, why dont you try making a new project in 4.5 and simply import or drag the clips into your 4.5 project browser, they should play surely as they're just QT files. You should not have to re -log and capture. FYI in case there's a misunderstanding ...if say you have twenty clips on one drive, in this case an external, and you want to bring them into a porject which may be on another drive, and you drag or import as above to get them into the project, this only happens in the virtual sense. It doesnt physically affect the hard drive in a mjaor way - the clips do not get transferred, just previews I suppose one could call them. I'm sure many readers would like to know if you can get the clips into a 4.5 project. Pls let us know!

Advantage of upgrading to Tiger on different systems

Couple of weeks ago I upgraded my 15" Powerbook G4 1.5 Ghz (512 MB RAM) from 10.3.9 to full Tiger. It went very smoothly and I love the new system - why oh why didn't I do it earlier??!! Tiger is definitely zippier on this system than Panther, even with the relatively low RAM.
I am now thinking of upgrading couple of my older Mac computers at work from Panther to Tiger too. I know the minimum hardware requirements for Tiger, and the systems do meet that. But, about a week and a half ago, I came across a non-Apple website article that had a good description of the feasibility of upgrading to Tiger on a whole slew of different Macs with different amounts of memory, processor speed etc. It was a really good article and would be a great guide for what I am trying to do. BUT, I can't find it again, neither in my history or by searching the web for the last hour. I can't remember how I found it.
Does anyone know where that article or set of notes is? Please??!!
Thanks,
Nick

I don't know the article but, I have install and ran Tiger on systems that actually were below the recommended requirements. But I do know that a G3 processor iMac (500Mhz) and iBook(700Mhz) with 256MB ram did very well with Tiger and the iBook when maxing out the RAM 640 Mb ran Very Nice even with applications that suggested 1Gig ram..Photoshop for example.
I don't think you will have a problem, but if you are concerned, make a backup. You can always revert back!!
Cheers, Glynn

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

How to use BPM itegrate different system aysnchronously

for example, 3 enterprise applications need to be integrated together with BPM, which are Bid system, ERP system, Finance system,
and erery business document should be approved by persons one by one in the 3 different application system with its workflow respectively, we can't change the workflow in the
different system, and only when the document is finished approved in the BID system asynchronously, it can enter the ERP system, an so on .
after the business document is approved in the Bid system, it should be returned in the BPM contexts,and the BPM user will dicide whether it will be enter the next system.
so how to integrate the 3 application system?
I draw a[ BPM process|http://www3.picturepush.com/photo/a/2586651/640/Picture-Box/aaa.jpg], but in this process, the "ERP human activity" activity, this activity how to get data from the "BID system asyn workflow" which is an asynchronized
wrokflow?

Gavin,
For asynchronous cases, you should adopt the "wait and trigger" principle. In BPM, you can acheive it by using a timer and an automated activity. Set the timer repeat time to say 15 mins (you should change it as per your business scenario), and then execute / trigger an automated activity, which will call your Bid system to check the state (whether the data entry / specific workflow is over). If the state is completed, (you may check using exclusive choice), move to next step. Else, pass back the control to timer which will again make the process wait. This way the objective could be attained.
Hope this helps.
Br,
Bala

Different System Alias in one iView

Hi all,
I have an ESS/MSS Szenario based on EP7 SP13 and HCM (ECC 6). I have setup the business package and all is working fine. I have setup the different System Aliases like SAP_R3_HumanResources and SAP_R3_HumanResources_Meta etc. and I have a working Single Sign On between my Portal and the HCM system.
I now face the challenge to change one link within the working time iView to point to a different system than all the others!
Let me explain: I have a second ERP 6 system that provides for the actual working time Web Dynpro and this Dynpro is not provided by the HCM system. I think I need to change the target for this one Dynpro to point to the ERP instead of the HCM system while all the other links in the working time iView still have to point to the HCM system!
I have no idea whatsoever, how to do this. I checked the PCD but I can't seem to find the right place where to adapt the System Alias for an iView at all. Can someone point me in the right direction?
Kind regards,
Christian

No you're not
In fact you lack the System and System alias that point to you're new ERP 6.
Here a link with a demo that explain how to create the system and define its alias : [demo|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24d8faf9-0701-0010-c99c-aabbdb7e95f4] .
Informations needed are the same you can find in a saplogon for the system you want to connect to.
Once you'll have defined system and alias you'll see it in you're listbox!
Anyway you'll still face the last problem : you can't define multiple system alias for the same iView.
Hope that helps!!
Edited by: Seb on Jan 9, 2008 4:34 PM

How to Configure a oracle R12 with RAC on two different system .

I have one laptop and one desktop
Laptop----
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .

Hussein Sawwan wrote:
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
Once you have the same OS, please refer to:
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Thanks,
HusseinHi Hussein,
For Rac I am using both same OS (linux 4) for both nodes .
Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

How to split a single file and then route it to different systems

Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.

Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth.

How One EP Portal will connect the 2 Different System(ECC Europe,China)

Hi Friends,
I have one more doubt on Multi region Functionality. Here we are using single EP Portal. Depending up on user we are able to connect to the ECC System.
Ex: Here we are using 2 ECC Systems( ECC Europe and ECC China). In Portal ECC Europe is login into the Portal he will be able to connect ECC Europe System through ECC Europe Model data and Meta Data like as ECC China user Login into the Portal he will be able to connect ECC China System through ECC China System Model data and Meta Data.
How can I do this work. Can you tell me. What type of coding I can write here. Please give Help.
Regards
VijayK

Hi Vijay,
Not just multiple Systems/JCos needed, you also need multiple souce objects to connect to multiple Systems/JCos.
In your case you need multiple iView (applications), and configure them to connect to different back-end systems.
You got to modify the Application Parameter of WD iView objects saperately to talk to different systems.
Reason, you cannot make one application to use multiple JCo destinations at any point of time.
Thanks,
MS

RFC call to a different system returns data from local system,

Hi:
I defined a RFC function and execute against a different system, the data returned is from the local system. The rfc_destination in SM59 works fine. The function works fine in the target system. No errors appear, just the data is not from the remote system.
Any input will be appreciated.
Thanks.
Kamaraj

Hi,
For now, it seems u haven't specified the destination properly. the call function statement must be suffixed with the 'destination' addition to make sure that the function call is an RFC and the particular function be executed at the desired destination.

I have a macbook pro and an Iphone, but when I look for them in find my iphone, I see ten in different accounts, WHY?

I have a macbook pro and an Iphone, but when I look for them in find my iphone, I see them in different accounts, WHY?

Could they be signed onto iCloud with different Apple IDs?

Transferring payments between different systems

Our Client has SAP CR&B and Oracle Financials.
SAP CR&B and Oracle use different Bank Accounts.
How do other clients handle scenarios where they have move dollars between different systems?
For example:
A customer has a receivable of 100 dollars in SAP CR&B and another receivable of 900 dollars in Oracle A/R.
Customer sends a payment for 1000 dollars which gets posted in SAP and also funded in the bank account. There is a credit of 900 on the customer account in sap.
We need to move the 900 dollars from SAP to Oracle system. Client wants to reverse the 1000 dollar payment posting and make a new payment posting for 100 dollars in SAP system.
If we make this new posting of 100 dollars - the bank clearing a/c will be off balance because we cant make the corresponding funding posting to the bank a/c since the money is already realized in the bank.

Hi,
I dont know if any physical connection is possible b/w your two systems-SAP CR&B and Oracle Financials.
However, what you can do is, you can move the total amount of say $1000 to the payment clarification worklist in SAP.
Then from there you can allocate the amount pertaining to the customer in SAP, say $100 to the customer account.
The remaining $900 you can move to a suspense account., and then post a misc dr to offset the same using a particular set of main\sub pertaining to a GL a/c-Payments-Oracle Financials in SAP.
In oracle, you can post a misc cr against the same GL A/c of $900 and allocate it against the customer's account.
At the end of the day, when you reconcile, entries in GL A/c in SAP should exaclty offset the entries of the GL A/c in Oracle.
Hope it helps....
Thanks,
Amlan

Adjust front panel to screen size and re-position objects on different systems automatically

Hello, i have designed a vi that contains 5 led's placed at the 4 corners and center of the front panel which occupies the entire screen. However, this vi is to be used on different systems having different screen sizes. But on every screen, i'll need the front panel size = screen size and the led's to be placed to the centers and corner of this new screen size automatically without any manual operations and positioning bieng done every time. Will the resize option perform this task completely or do i have to go for some other techniques?
Solved!
Go to Solution.

As far as I know, what you want is not easy to do but it is doable but you have to programmatically do it (no Labview setting). Here is an example for only 2 LEDs but I suppose that you will be able to make it work for your other LEDs.
This VI maximizes the front panel and then positions the 2 LEDs in the center and top right corner upon running. The LEDs are positioned according to their own top left corners, not according to their centers.
Marc Dubois
HaroTek LLC
www.harotek.com
Attachments:
Position LEDs.vi ‏14 KB

Different queues in different systems - why?

Similar Messages

Maybe you are looking for