Different Resolutions

I have been struggling to find a way to display jpeg images
over a .swf video. I finally found a code written by another person
and I modified the code to fit what I was trying to do. The images
display over the .swf file the way I want them to. The problem is I
can't find a way to put the .swf and the jpegs into a table. When I
try to arrange them in a table, the .swf ends up back on top. Is
there a way for me to just adjust my website to for different types
of browser resolutions. It is a lot easier to understand if you
just look at the website. I have it adjusted for Internet Explorer
and a 1024 x 768 resolution. No other browsers or resolutions will
work properly. When you open the page, you can scroll over the
thumnails without clicking them.
http://www.jocci.net/mako25.html

Hi,
I had a similar problem with one of my applications in full screen mode, the best solution is to base all your sizes on the resolution - you have two variables screenX and screenY and you SIZE YOUR COMPONENTS as FACTORS of each - say button.setSize(screenX/10, screenY/10) or something like that( okay its manually sizing componsnts, but it works.)
Hope it works for you,
Astranomina

Similar Messages

How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. Do I use .png or svg?

I want to use Edge Animate to create native app in PhoneGap Build. How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. And do I use .png or svg?

If you use responsive scaling it will definitely scale .
For best practises regarding graphics refer
Edge Animate Help | Best practices for graphics in Adobe Edge Animate

Can I print photos at different resolutions in one PS5 file?

I am printing photos on fabric. I'd like compare one printed at 300dpi and the same photo at 150 dpi. I was going to set them side by side on a piece of fabric and realized I had to specify the resolution of the file I'm placing them in. Can I have two files at different resolution in one file? If the new file is of 300dpi resolution how does this affect the image at 150dpi? Thanks!
Mary

Hello again,
thanks so much for helping a newbie sort things out. I'm still confused. I know that a higher resolution like 300dpi, has more dots per inch and has the potential to give me more detail in print than a lower dpi.
If I crop a raw file as an 18" square- I will make it either 150 or 300 dpi. I'm trying to place two images ( the same images) side by side in a photoshop file to compare the results when they print- (I'm printing with an online vendor). Can I do that? that is, place a 150 dpi image next to a 300 dpi image in one PS file, identified ast 300dpi ? What are the print results? Will both images look the same, or will the 150 dpi be converted to 300 and I won't see any difference anyway?
Or, do I need to set up two separate files-one at 150 and one at 300, and print them separately, to compare them?
Can you help me understand this? Thanks!

Multiple displays with different resolutions

The system is setup with two non-mirrored displays with the following resolutions: A) 1024x768 and B) 1280x1024 arranged as BA with A the menu'd display using an ATI 9000 Pro for Mac. During startup, approximately once inch worth of the menu's right items momentarily appear on the right side of display B 768 pixels down from the top. This problem only occurs in this BA configuration of differing resolutions and is independent of graphics cards (substituted the 9000 Pro with a mirror only AGP Navidia card and a mirror only PCI ATI Rage card combination which gave the same result). This problem first appeared using MacOS 10.3 which displayed several inches of menu instead of only an inch under MacOS 10.4. Anyone else seen this problem?
Dual 800 MHz QuickSilver Mac OS X (10.4.4)

Over the weekend, I explained this problem to one of the Apple Geniuses at an Apple store and then was able to duplicate the issue using a lap top and attached monitor in the store (not the same resolutions as my system; but, screens of similarly different resolutions). I raise this issue again because, as of late, additional things have been happening and I wonder if these are related to the core issue of an expanded desktop with two different screen resolutions. All of the widgets on the larger resolution screen desktop are drawing in the menu located in the smaller resolution screen when hitting the "i" to gain access to its control panel; however, not effecting the menu at all when moved to the smaller resolution screen. The other has to do with screen savers periodically blanking both monitors (as though the graphics card went to sleep) or having both monitors lose syncing (first occurrence today) where a cold start is required to bring the monitors on line again (I am going to have to figure out a way to test if the system is actually sleeping or the monitors have only gone blank before cold starting the system).

Why are my HD videos all importing with different resolutions?

Hi, I tried looking through like 10 pages of discussions on here and didn't see anybody else having this problem.
I have a Canon Vixia HF200, I keep the settings on MXP (highest quality 1920 x 1080). Every time I log and transfer my videos they import at different resolutions (everything from the same day will be the same), some of them come in as 1440 x 1080, 720 x 480, etc, when they should all be 1920 x 1080.
So, since some of them ended up being a completely different aspect ratio, I went into Motion>Distort and changed them all to 1920 x 1080, and I thought it was fine, but now I'm noticing that some of the videos look really out of focus (it seems like they get more out of focus every time I open it), so I'm thinking I probably shouldn't have stretched them....
I checked the original videos in the browser and they all say 1920 x 1080 now, when I watch them in the viewer, they actually look like good HD videos, but in the canvas they're out of focus...
I'm also working with multiple sequences, and when I copy videos from one sequence to another, it changes the resolution/aspect ratio/scale again, and becomes more blurry when I try to fix it.
So basically, I have a huge mess. I'm working on editing a documentary that I'm making and now most of the video looks bad and I'm not sure how to change it back. I even tried starting a new project and importing the original videos, but they don't seem to have the original quality.
Anybody know how I can either fix this or somehow replace the clips in the sequence with the originals in the browser to at least get some quality back?
Also, a lot of the time when I render, I come back to the computer and it says something like "Error: Illegal (something) render failed" and completely loses the rendering that it spent a long time doing.
I appreciate any help.
Lisa

Hi Lisa,
Your 1920x1080 clips most likely import at their normal frame size, and then you placed them in the wrong sequence. Make sure your +File > Easy Setup+ is set to *Apple Intermediate Codec 1920x1080i60* before you create a new sequence.

[SOLVED] Configure dual head with different resolutions xf86-video-ati

I have 1680x1050 and 1280x1024 monitors which I would like to setup so that I have two displays (:0.0 and :0.1), i.e. can't drag a window to the other display, but can move the mouse from one screen to the next. The graphics card is Radeon HD 4850.
At the moment I have one screen only, so I can't move the mouse from the first to the second screen, it is captive in the first screen.
xrandr -q
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680
HDMI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0 70.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
xorg.conf:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "radeon"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Xorg.0.log:
(==) ServerLayout "dual head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Keyboard0"
It doesn't look as if xrandr can help as it reports a maximum virtual desktop of 1680x1680.
Because the two monitors are different resolutions I don't know if a single screen is the answer.
I used to have two displays/screens configured to two different resolutions matching the monitors using the catalyst driver but can't get it working using the xf86-video-ati driver.
Any help would be appreciated.
Thanks
Willem
Last edited by Willem (2010-01-02 20:42:41)

Thanks, with your help I was able to get it working.
The xorg.conf relevant sections:
Section "ServerLayout"
Identifier "dual head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 444 277
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 339 271
Option "RightOf" "Monitor0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-HDMI-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Would still be interested to get a seperate display for each monitor working though.

I see the same photos with different resolutions in my iPhoto library

I am trying to organize my photos in the iPhoto library by deleting those are stored twice or more. However in many doubles I found out that some of them exist in my library in different resolutions. My photos are imported either from my camera, or from my iphone, or from my iPad or from the shared photo streams which include photos imported from various apple devices.
What I see for example is some photos taken from an iPhone exist in both 2048x1536 and in 3264x2448 resolution and some others in 1224x1632 and in 1536x2048 (I guess these 2 resolytions are for the vertically taken thotos while the other 2 for orizontical). For iPad photos I see 2056x1536 and 2592x1936 for the same photos. All doubles have different names (eg. IMG_007 and IMG_1056 for the same photo). Furthermore some doubles include info about the camera (eg. iPad back camer 4.28mm f/2.4) and some others don´t (only info about the device eg. iPad).
Why is this mess happening in my library? Apparently I want to keep in my library the photos only in the maximum available resolution for better quality.
In relation to that I have the following questions:
1. When a photo or a video is shared in a photo stream, is its resolution decreased to a lower one?
2. Is there any way to see what the resolution is of the original photo stored in the iPhone or iPad, so that I can compare with the the same ones I have on my computer´s iPhoto library?
3. Is there any way to see the resolution and other info for the Photos in a shared Photo stream which are not yet imported localy on my computer?
Thanks in advance.

Happy New Year to all!
I made a test and I confirm what I was suspected at first place.
I uploaded a photo taken from my iPhone to the shared photo stream. Then I imported this photo from the photo stream to my iPhoto library on my Mac. The resolution in which this photo is stored locally is 2048x1536 and its size 961 KB.
Then I sent the same photo from my iPhone via e-mail. I opened the email on my computer and downloaded the photo. Then I imported it to my Mac´s iPhoto library. I checked the info out and the resolution is now 3264x2448 and size 2.2 MB.
Therefore the quality and resolution of the photos that are uploaded to the icloud photo stream is NOT the same as the original one.
I don´t know whether there is somewhre an option to change that, but this is what happens to me right now.

Different resolutions in proyector/iMac, same content?

Hi guys,
Is it possible to have different resolutions in a proyector and your iMac but to show all your work in both displays at the same time?
I want to show how to use a software in the proyector using the highest resolution in my iMac, which is different to the one of the proyector. I can't do it without using the mirror display option, which makes that I have the same resolution of the proyector in my iMac Screen, which supports a higher one. It only works for final powerpoint presentations (?).
Many thanks by the help!

instead of using the mirror option use the spanning option but in the displays preferance panel click a drag the dock and the menu bar from the "iMac" display to the "other" display this would make your primary screen the projector.
hope this solves your problem as i don't think there is any other solution

Cine 30" raedon x800xt and an addidtional (different resolution) monitor

I have a G5 with a 30 inch cine display and a radeon x800xt video card. I would like to get an additional 19 inch monitor to use as a tool pallate. I am not schooled on video cards, but can I add a second monitor of a lower resolution.....(again i am only using to park tool pallates)....and have the video card recognize two different resolution settings.

The X800 can handle two monitors, with independent settings for resolution. The DVI port can handle a display up to 30" (2560 x 1600). The other port (ADC) can handle up to 23" (1920 x 1200).
If the second display is not ADC, you will need an adapter, either ADC to DVI, or ADC to VGA. (ADC to DVI, followed by DVI to VGA, won't work, because most ADC to DVI adapters don't pass the analog video signals needed for VGA.)

Mirroring Desktop at Different Resolutions

Hello,
Does anyone know if it is possible to mirror the desktop at different resolutions without my cinema display shrinking down the viewable area? I have a seperate 27" hdtv in my living room hooked up and I want to be able to use both displays on the desktop. When I choose to mirror, then change the resolution on my cinema display, it makes the actual viewing area the same resolution (in size) the same as the hdtv, and leaves a lot of blox surrounding the viewable area, but the tv looks great. Is there any way I can run the cinema display in full screen used at native resoluting while using lets say the hdtv at 800x600 both mirrored?
I am going to try and switch the ports on the back of my macpro and see if that makes a difference, any suggestions would be awesome!
Thanks,
Tim

Thank you for the reply, unfortunetly I know what your saying, I do know the difference between screen spanning and mirroring. I have a specific need where I want to mirror my desktop to two different screens at different resolutions. That is simply it. I have set up my hdtv in another room and cannot use the screen spanning since a) I cannot access the dock from my lcd, becuase my cinema display screen is in another room b) half the time I cannot even find the mouse. When I setup mirroring, and attempt to set the cinema display to bative 1600x1050 resolution, it puts the screen in a type of compressed viewable, where the actual dimensions are 800x600, which is what my hdtv is running at (I have to run it at 800x600 because I am using a homemade vga over cat5e converter and the hdtv looks and runs bests (without ghosting) at this resolution).
So the main question is, is it possible to diplsay the same desktop onto two different monitors at different resolutions with distortion of either dispkay?
If you would like a photo of what is happeneing on my cinema display, just let me know, it is hard to describe and I dont blame the doubtness of this thread.
Thank you for helping out!
Tim

Is it possible to publish a project with a different resolution than the native project resolution?

I think I know what the answer is going to be here, but I'm going to ask anyway. The background here is that I've made a few demo videos for new products and features my company is working on. I'm using CP4 for this. Our marketing department wants to take AVIs of my demos and insert them into their Powerpoint demonstrations. However, the native resolution of our demos doesn't make for a graceful import into Powerpoint. Thus, I've been directed to provide smaller res AVI files.
Thus, I am wondering if you can publish a project at a different resolution than the one in which it was recorded. My initial poking around seems to indicate that the answer is "no," and if this is truly the case, I will be rumbling over to the "Suggest a Feature" forum soon. There does seem to be a kind-of-workaround in that you can change the resolution of the project before publishing it, but this is something that cannot be undone, meaning that in order to do this, I will have to save new, smaller versions of all my projects. This is a bit ungainly.
So, if anyone knows a good trick here, I would love to hear it!

Unfortunately, I don't know what you mean when you say "manual panning." And I'm really not sure what you mean when you say the fields are not fully visible in the original image; they are completely visible. Here's a close-up from the original slide:
As you can see, the fields are completely visible.
Also, the slide is not entirely static. For the slide I chose as an example, the Password is filled in before the mouse moves. This typing may be part of what is getting Captivate confused; note this sequence from the resized version of the project:
Slide 35:
The login window first appears. Everything is normal. During this slide, the mouse moves and clicks inside the User ID field, leading to...
Slide 36:
At this point, things begin to go awry. The user name is entered, and the cursor moves to the Password field.
Slide 37:
Whoops! As soon as we click Login, everything goes back to normal.
Slide 38:
I will try a few of the suggestions you offered, and will report back with the results.

Layout problem in Different Resolutions

Hi All,
I have a application which i have designed using null layouts and the resolution i have used is 1024x768. Now when i open the same application in 800x600 resolution some of the components placed at the bottom of the application are not seen. To resolve this issue i designed using GridBagLayout but still some of the components were not seen..Can anyone help me on how to resolve this issue..
Thanks in advance
Arpana

Ya the size of the container was changed but our application is such that
use of scrollpane is not recommended..Hence the problem..I have checked some softwares
designed in java on different resolutions and amazingly all the components get repositioned
according to the resolutions..But am yet to find out how it was achieved..

Eliminating different-resolution duplicates?

I've got just under 5000 photos being copied as we speak into a new iPhoto '08 library. There are a bunch of duplicate photos in that batch, which iPhoto should have caught except I'm pretty sure the pairs (or, god forbid, trios) of duplicates are at different resolutions.
I'd love to be able to trim my library down by eliminating the lower-resolution duplicates. Is there any program/way to do this automatically that will catch them even if the resolutions are different?

Try Duplicate Annihilator
Regards
TD

Bridge_How Fit-to-Screen with different resolution pictures in Fullscreen/Slideshow

Hallo,
I´m looking for a solution for my following problem:
I have several photographs in totally different resolutions. Some are pretty small, some are huge.
I want to show them with Bridge in FullScreen-Preview or maybe as a slideshow.
How can i bring them all to fit the whole screen, even if the resolution is to small to fit regularly.
In other words, is there an option for dynamic zooming to bring every frame to FIT the Screen, regardless which resolution it got?
I discovered "scale to fit" in the slideshow options, but it doesnt work for me.
An zooming every file in the right position and size is not an option.
Im sure Bridge is able to do it, beacause even IrfanView and ApplePreview are able. But where to find this option?
Can anybody help?
Thank you a lot
best regards
madlo

As far as I know, Bridge will not enlarge small images. If you hit '+' on fullscreen preview, it zooms in, but keeps the same zoom for every image.

Different resolutions for Macbook Pro display and External display

Is it possible to have different resolutions for a Macbook Pro and an external display. I prefer to see less but larger on my Macbook Pro whilst seeing more but smaller on my external display. I use the DVI output to connect to an Acer 22in display.
Thanks in advance
Ian

in4time wrote:
I've actually tried that process and it doesn't work; I still get the same display qualities on both. Perhaps that process might work if one is not mirroring. Maybe there is a compatibility issue between my Macbook Pro and the Acer 223W. I'll persevere, but thanks for your help anyway.
Ian
Hi Ian,
allow me to chime in:
You are absolutely correct!
In 'Mirroring Mode' both internal and external display have the same resolution.
Only in 'Extended Mode' you can have different resolutions for both displays.
Regards
Stefan

Layout with different resolutions

Hallo and good morning!
Once again I need some advice:
I have a program that is running on different machines with different resolutions.
Is it possible to avoid, that the layout is paning all around?
Best regards
Hilby
Solved!
Go to Solution.

Hi Hilby,
No... that is currently a limitation of the layouts, where we try to adapt to each screen, but the objects and the layout may not fit into a different aspect ratio with a different number of pixels.
The aspect ratio is the most important, followed by the total resolution of the screen.
Some more information on aspect ratios is below.
In summary, DASYLab is unable to completely adapt the "Screen" layout for evey monitor size and resolution. If you want to have a fixed layout that does not completely occupy some monitors, then consider using a fixed size, like A4 or A3.
If you make something on a big monitor, 1600x1200 for example, and move it to a wide screen monitor,, 1600x900.
From my friends at Wikipedia
With computer displays, aspect ratios wider than 4:3 are also called widescreen. Widescreen computer displays were previously typically of 16:10 aspect ratio, now they are shifting to 16:9.
Until about 2003, most computer monitors had a 4:3 aspect ratio and some had 5:4. Between 2003 and 2006, monitors with 16:9 and mostly 16:10 (8:5) aspect ratios became commonly available
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Different Resolutions

Similar Messages

Maybe you are looking for