Different RM Number in My N97

Dear All:
Good Day !!!
I noticed a strange problem inside my N97. In the phone body RM# is reading as RM-505 (N97-1). But in NSU or *#0000# RM number is reading as RM-507 (N97)
My current software version is V12.0.024. However, I want to upgrade to V20. Somebody please help me by posting valuable advice.
Thanks Much !!!
Kamrul
Nokia N8

Try doing a restore in recovery mode or what is known as DFU.
Instructions to boot into DFU can be found here:
http://www.youtube.com/watch?v=34v8HMC9B98
Once in DFU mode, plug into iTunes and click Restore.
I know you said you tried all reset procedures, but I want to be sure.
Note: This will delete all your data on the Phone, hopefully you have a backup.

Similar Messages

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

Is It Possible To Create Different Personnel Number For One Employee

HI Experts,
My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
1. How to generate 3 different Personnel number for One employee?
2. How these 3 Personnel number should get linked, if want to get report for this one employee?
Kindly help me.
Thanks,
Lavanya
Message was edited by: Sikindar A

Hi Lavanya,
Your requirement can be fulfilled but not recommended...
As you want to generate different position number at different stage of employment....
i.e Trainee to Probation to Permanent...
First go for Trainee Position Hiring .... and generate first Number Say 5000000
Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
Similarly,, you can do for Permanent employee...
Once training or Probation period gets completed you can lock/ separate that employee number
Report ...
You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
Hope this should sort your issue..
Regards,
Veeram

HT5538 I have a different phone number when traveling, that the one registered in my account. How can I add it?

I have a different phone number when traveling, that the one registered in my account. How can I add it?

Lost information
https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

Need to show proof of purchase to my insurance company, but my phone was replaced by apple so has a different imei number to the one on my receipt, how do you sort this out??

Need to show proof of purchase to my insurance company, but my phone was replaced by apple so has a different imei number to the one on my receipt, how do you sort this out??

Contact Apple and see if they can provide any documentation of the device swap.

Good issue on production ordre using different serial number

Hi expert,
I have a production order with several serial number of FG to be manufactured.
Material with batch number have been assigned and reserve for the production order.
I would like to perform a good issue of raw material with batch number and dispatched to the different serial number generated.
Do you have any idea to do it?
Best regards
Martial

hi,
We have use serial management as follwoing ,Pl. tally whether u suit it.
for traceability,We have maintain serial number profile into material master for FG & SFG materials,
During order confirmation,sytem allow to confirm the order ,but SFG with serial no. profile not gets consumed,
for that we use MB1A movement type 261 with input order number ,enter serial no. for the component & save.
we could later easily trace the component consumption through MB51 261 document for that particular material.
Regards,
Devendra

How to Use Same Asset Number with Different Sub-number

Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin

Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu

STO- Different material number in 2 plants

Dear all,
I want to do STO for a material, Provided I want to maintain the different material number in two plants, Is it possible, if so pls reply me the procedure

You can create the Same material with diff Number in two Plants..
But you can not do STO..
For STO the Material Should exist in the Two Plants with Same Number..

Catalog vendor having different vendor number in different R/3 system

Hello Experts,
We are in SRM 7.0 classic scenario and we are facing an issue as described below:-
We are using a punched out catalog which has different venor number in different backend system.We have 2 R/3 backend system say R/3 sys1 & R/3 sys2.
Vendor No for the Catalog vendor is say:-
Vendor No     R/3 sys
V123              R/3 sys1
V567              R/3 sys2
We have connected the R/3 sys2 just a week back.We have replicated the catalog vendor number V567 from R/3 sys2 into SRM system and we are able to successfully create a Shopping cart in R/3 sys2 using catalog.
However,we are facing a problem and the problem is that,
When we create a shopping cart in R/3 sys2 using catalog,by default we get a message that "Vendor V123 is not intended for plant"
We are able to change the vendor from V123 to V567 in the portal,but we are unable to understand why the vendor V123 is picked up as a default catalog vendor.
Can you all experts,plz help us understand why this vendor V123 is picked up as default vendor and how we can ensure that Vendor V123 is picked up when we are creating SHC is system R/3 sys1 & vendor V567 is picked up as default vendor when we are creating SHC in system R/3 sys2?
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hello RKS,
>
RKS_Jsr wrote:
> (...)
> Can you all experts,plz help us understand why this vendor V123 is picked up as default vendor and how we can ensure that Vendor V123 is picked up when we are creating SHC is system R/3 sys1 & vendor V567 is picked up as default vendor when we are creating SHC in system R/3 sys2?
>(...)
This means for same Product Category (and same material ID) coming from your Punch-Out catalog, you can create a Purchase Requisition in R/3 sys1 OR R/3 sys2 ?
If i am correct, how can you manage in your catalog two vendor numbers for same Product Category (and material ID) ?
I guess only one vendor number (V123) is maintained in your catalog. That's why, even if your management rule is to send your SC to R/3 sys2, you will have always vendor V123 as the default one, as it is the only one in your catalog...
Regards.
Laurent.

Messagebox that displays a different randum number every 2 secs

well im having trouble with putting a messagebox that displays a different randum number every 2 secs and closes with a close button. it goes in the print menu option of this simple text editor,you shoud also be able to work in the background while this message box is been displayed.
import javax.swing.*;
import javax.swing.text.*;
import javax.swing.text.rtf.*;
import javax.swing.event.*;
import javax.swing.filechooser.*;
import javax.swing.undo.*;
import java.util.Timer;
import java.util.TimerTask;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import java.beans.*;
-------------------| Simple Text Editor example application using Java 1.3 with Swing |--------------
public class SimpleTextEditor extends JFrame
 private JTextPane textpane;
 private JMenuBar mb;
 private JFileChooser chooser,picChooser;
 private Hashtable actions;
 private JPopupMenu popup;
 private JMenuItem exit, newDoc, save, open, saveAs,print;
 private About ab;
 private StyledEditorKit edkit;
 private RTFEditorKit rtfkit;
 private DefaultStyledDocument doc;
 private MyDocumentListener doclistener;
 private MyUndoableEditListener undolistener;
 //Useful variables
 private String filename="untitled1.txt",filetype=".txt";
 private File thisfile;
 protected String FileFormats[],FileDescriptions[],PicFileFormats[],PicFileDescriptions[];
 protected boolean DocumentIsUnedited=true, DocumentIsSaved=false;
 public static int SQUARE=0,TRIANGLE=1,CIRCLE=2;
 public String newline="\n";
 protected UndoManager undo ;
 protected UndoAction undoAction;
 protected RedoAction redoAction;
 // These are the actions used in the menus and on the toolbar
 protected Action bold, italic, underline, alignleft, alignright, aligncentre;
 protected Action spellchecker, alignjustify, more, cut, copy, paste, tools[];
 public SimpleTextEditor()
 super("SimpleTextEditor - untitled1.rtf");
 this.setLocation(200,200);
 this.setIconImage(getMyIcon("Icon.gif").getImage());
 getContentPane().setLayout(new BorderLayout());
 undo = new UndoManager();
 //Set up the file formats and file choosers etc
 FileFormats = new String[]{".rtf",".txt",".java",".bat"};
 FileDescriptions = new String[]{"Rich Text Format Files","Text Files","Java Source Files","DOS Batch Files"};
 PicFileFormats = new String[]{".gif",".bmp",".jpg"};
 PicFileDescriptions = new String[]{"Gif Images","Bitmap Images","JPEG Images"};
 chooser = new JFileChooser();
 picChooser = new JFileChooser();
 picChooser.setAccessory(new ImagePreview(picChooser));
 javax.swing.filechooser.FileFilter defaultFilter = new SimpleFilter(FileFormats[0],FileDescriptions[0]);
 javax.swing.filechooser.FileFilter defaultPicFilter = new SimpleFilter(PicFileFormats[0],PicFileDescriptions[0]);
 for(int i=1;i<FileFormats.length;i++){
 chooser.addChoosableFileFilter(new SimpleFilter(FileFormats,FileDescriptions[i]));
for(int i=1;i<PicFileFormats.length;i++){
picChooser.addChoosableFileFilter(new SimpleFilter(PicFileFormats[i],PicFileDescriptions[i]));
chooser.setFileFilter(defaultFilter);
picChooser.setFileFilter(defaultPicFilter);
File working = new File("C:/Documents");
if(!working.exists()){
working= new File("C:/MyDocuments");
if(!working.exists()) working = new File("C:/");
if(working.exists()) {
chooser.setCurrentDirectory(working);
picChooser.setCurrentDirectory(working);
// Set up Document object and Editor kits
doc = new DefaultStyledDocument();
edkit = new StyledEditorKit();
rtfkit = new RTFEditorKit();
// Set up Listener objects
doclistener= new MyDocumentListener();
undolistener= new MyUndoableEditListener();
doc.addDocumentListener(doclistener);
doc.addUndoableEditListener(undolistener);
//Set up main GUI content
textpane=new JTextPane(doc);
textpane.setPreferredSize(new Dimension(400,400));
textpane.setMinimumSize(new Dimension(400,400));
JScrollPane scroller=new JScrollPane(textpane);
scroller.setPreferredSize(new Dimension(400,400));
mb=new JMenuBar(); // Create a menu bar
JMenu File=new JMenu("File");
JMenu Help=new JMenu("Help");
//Sort out Actions etc
createActionTable(textpane);
createToolbarActions();
JMenu Style=createStyleMenu();
undoAction = new UndoAction();
redoAction = new RedoAction();
//Create Style, Edit and Format menus + Toolbar
JMenu Edit=createEditMenu();
JMenu Format=createFormatMenu();
JMenu Insert = createInsertMenu();
JToolBar toolbar = createToolbar();
getContentPane().add("North",toolbar);
// set up main menu items with ActionListeners
newDoc=new JMenuItem("New");
newDoc.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
newDoc();
exit=new JMenuItem("Exit");
exit.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
exit();
print=new JMenuItem("Print");
print.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
print();
save=new JMenuItem("Save");
save.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
save();
saveAs=new JMenuItem("Save As...");
saveAs.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
saveas();
open=new JMenuItem("Open...");
open.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
open();
JMenuItem about=new JMenuItem("About");
about.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
ab=new About(SimpleTextEditor.this);
ab.show();
ab.setLocation(400,300);
// Create the popup menu
popup = createEditMenu().getPopupMenu();
popup.addSeparator();
popup.add(createStyleMenu());
popup.add(createFormatMenu());
textpane.add(popup);
// set up Help and File menus
Help.add(about);
File.add(newDoc);
File.add(open);
File.add(print);
File.add(save);
File.add(saveAs);
File.addSeparator();
File.add(exit);
// add the menus to the menubar
mb.add(File);
mb.add(Edit);
mb.add(Format);
mb.add(Style);
mb.add(Insert);
mb.add(Help);
this.setJMenuBar(mb);
getContentPane().add("Center",scroller);
// Add mouse Listener to the textpane for popup events
textpane.addMouseListener(new MouseAdapter(){
public void mousePressed(MouseEvent e)
if(e.isPopupTrigger())
popup.show(textpane, e.getX(), e.getY());
e.consume();
public void mouseReleased(MouseEvent e)
if(e.isPopupTrigger())
popup.show(textpane, e.getX(), e.getY());
e.consume();
//-----------------| Main active methods |------------------
public void exit()// Main Exit method
if(DocumentIsUnedited){//Check that document is saved/unedited etc
dispose();
setVisible(false);
System.exit(0);
else{
switch(showNotSavedDialog("Exit")){
case JOptionPane.YES_OPTION: save(); exit(); break;
case JOptionPane.NO_OPTION: DocumentIsUnedited=true;exit();break;
case JOptionPane.CANCEL_OPTION: break;
public void newDoc()//Method to create new documents
if(DocumentIsUnedited){
initDoc();
filename="untitled.txt";
filetype=".txt";
resetTitle();
else
switch(showNotSavedDialog("New Document")){
case JOptionPane.YES_OPTION: save(); newDoc(); break;
case JOptionPane.NO_OPTION: DocumentIsUnedited=true;newDoc();break;
case JOptionPane.CANCEL_OPTION: break;
private void initDoc()// Helper method to initialize a new document
doc = null;
doc = (DefaultStyledDocument)edkit.createDefaultDocument();
doc.addDocumentListener(doclistener);
textpane.setStyledDocument(doc);
public void print()
new TimerTestFrame();
class TimerTestFrame extends JFrame
Timer timer;
TimerTestFrame()
super();
timer = new Timer(true);
TimerTask task = new MessageTimer(TimerTestFrame.this);
timer.schedule(task,2000,2000);
class MessageTimer extends TimerTask
Component parent;
public MessageTimer(Component parent)
this.parent = parent;
public void run()
int randnum = (1 +(int)(Math.random()*10));
JOptionPane.showMessageDialog(parent,""+randnum,"Timer Message",JOptionPane.INFORMATION_MESSAGE);
public void saveas()
int n = chooser.showSaveDialog(this);
if(n==0){
filename=chooser.getSelectedFile().getName();
boolean ext = false;
setFiletype();
thisfile = new File(chooser.getCurrentDirectory(),filename);
DocumentIsSaved=true;
save();
resetTitle();
repaint();
public void save()// Save method. Used by "Save As..." as well
if( DocumentIsSaved)
try
FileOutputStream out = new FileOutputStream(thisfile);
if((filetype.equals(".rtf"))||(filetype.equals(".doc"))){
rtfkit.write(out,doc,0,doc.getLength());
else edkit.write(out,doc,0,doc.getLength());
catch(Exception e)
System.out.println(""+e.getMessage()+"");
DocumentIsUnedited=true;
else saveas();
public void open()// Find a file and read it into the document
if(DocumentIsUnedited){
int n = chooser.showOpenDialog(this); // get the outcome of the dialog
if(n==0){
File file = chooser.getSelectedFile();
filename=chooser.getName(file);
setFiletype();
resetTitle();
initDoc();
try
FileInputStream in= new FileInputStream(file);
if(filetype.equals(".rtf")){
rtfkit.read(in,doc,0);
edkit.read(in,doc,0);
catch(Exception e)
System.out.println(""+e.getMessage()+"");
thisfile= new File(chooser.getCurrentDirectory(),chooser.getSelectedFile().getName());
DocumentIsUnedited=true;
DocumentIsSaved=true;
resetTitle();
repaint();
else
switch(showNotSavedDialog("Open")){
case JOptionPane.YES_OPTION: save(); open(); break;
case JOptionPane.NO_OPTION: DocumentIsUnedited=true; open(); break;
case JOptionPane.CANCEL_OPTION: break;
private void setFiletype()// Helper method to get the filetype of saved/opened documents
filetype=null;
for(int i=0;i<FileFormats.length;i++){
if(filename.toLowerCase().endsWith(FileFormats[i])) filetype = FileFormats[i];
else{
for(i=0;i<filename.length();i++){
if(filename.toLowerCase().charAt(i)=='.')
filetype=filename.substring(i);
if(filetype==null) filetype=".txt";
private void resetTitle()
this.setTitle("SimpleTextEditor - "+filename);
private ImageIcon getMyIcon(String filename){
ImageIcon pic = new ImageIcon("Images/"+filename);
return pic;
private int showNotSavedDialog(String title)// Helper method to create "Save? Yes/No/Cancel" dialogs
int n = JOptionPane.showConfirmDialog(this,"The last document has not been saved. \nDo you want to save it first?",
title,
JOptionPane.YES_NO_CANCEL_OPTION,
JOptionPane.QUESTION_MESSAGE);
return n;
//-----------------| Listeners and Helper classes |----------------
protected class MyDocumentListener implements DocumentListener
public void insertUpdate(DocumentEvent e) {
SimpleTextEditor.this.DocumentIsUnedited=false;
public void removeUpdate(DocumentEvent e) {
SimpleTextEditor.this.DocumentIsUnedited=false;
public void changedUpdate(DocumentEvent e) {
SimpleTextEditor.this.DocumentIsUnedited=false;
protected class MyUndoableEditListener implements UndoableEditListener {
public void undoableEditHappened(UndoableEditEvent e) {
//Remember the edit and update the menus.
undo.addEdit(e.getEdit());
undoAction.updateUndoState();
redoAction.updateRedoState();
//Helper class for FileFilter, allows a description to be assigned to a filetype
protected class SimpleFilter extends javax.swing.filechooser.FileFilter
String type,des;
public SimpleFilter(String type, String des)
this.des=des;
this.type=type;
public boolean accept(File f){
if(f.isDirectory())return true;
else{
if(f.getName().toLowerCase().endsWith(type)) return true;
else return false;
public String getDescription(){
return des;
//------------| Methods to help create menus and toolbar |--------------
protected JMenu createStyleMenu()
JMenu menu = new JMenu("Style");
menu.add(bold);
menu.add(italic);
menu.add(underline);
menu.addSeparator();
menu.add(new StyledEditorKit.FontSizeAction("12", 12));
menu.add(new StyledEditorKit.FontSizeAction("14", 14));
menu.add(new StyledEditorKit.FontSizeAction("18", 18));
menu.addSeparator();
menu.add(new StyledEditorKit.FontFamilyAction("Serif","Serif"));
menu.add(new StyledEditorKit.FontFamilyAction("SansSerif","SansSerif"));
menu.addSeparator();
Action red = new StyledEditorKit.ForegroundAction("Red", new Color(255,0,0));
red.putValue(Action.SMALL_ICON,getMyIcon("red.gif"));
menu.add(red);
Action green = new StyledEditorKit.ForegroundAction("Green", new Color(0,150,0));
green.putValue(Action.SMALL_ICON,getMyIcon("green.gif"));
menu.add(green);
Action blue = new StyledEditorKit.ForegroundAction("Blue", new Color(0,50,150));
blue.putValue(Action.SMALL_ICON,getMyIcon("blue.gif"));
menu.add(blue);
Action black = new StyledEditorKit.ForegroundAction("Black", new Color(0,0,0));
black.putValue(Action.SMALL_ICON,getMyIcon("black.gif"));
menu.add(black);
menu.add(more);
return menu;
protected JMenu createEditMenu() {
JMenu menu = new JMenu("Edit");
menu.add(undoAction);
menu.add(redoAction);
menu.addSeparator();
menu.add(cut);
menu.add(copy);
menu.add(paste);
menu.addSeparator();
Action selectall=getActionByName(DefaultEditorKit.selectAllAction);
selectall.putValue(Action.NAME, "Select All");
menu.add(selectall);
return menu;
protected JMenu createFormatMenu(){
JMenu menu = new JMenu("Format");
menu.add(spellchecker);
menu.add(alignleft);
menu.add(alignright);
menu.add(aligncentre);
menu.add(alignjustify);
return menu;
protected JMenu createInsertMenu(){
JMenu menu = new JMenu("Insert");
Action insertimage = new InsertImageAction(this);
menu.add(insertimage);
Action insertdate = new InsertDateAction();
menu.add(insertdate);
Action insertline = new InsertLineAction();
menu.add(insertline);
JMenu bullets =new JMenu("Bullet Points");
bullets.add(new InsertBulletAction(CIRCLE,"Circle"));
bullets.add(new InsertBulletAction(TRIANGLE,"Triangle"));
bullets.add(new InsertBulletAction(SQUARE,"Square"));
menu.add(bullets);
return menu;
public JToolBar createToolbar(){
JToolBar bar= new JToolBar();
JButton newbutton=new JButton(getMyIcon("new.gif"));
newbutton.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
newDoc();
bar.add(newbutton);
JButton savebutton=new JButton(getMyIcon("save.gif"));
savebutton.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
save();
bar.add(savebutton);
JButton openbutton=new JButton(getMyIcon("open.gif"));
openbutton.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e)
open();
bar.add(openbutton);
bar.addSeparator();
for(int i=0;i<tools.length;i++){
JButton button=new JButton();
button.setAction(tools[i]);
button.setIcon(getMyIcon(tools[i].getValue(Action.NAME)+".gif"));
button.setText("");
bar.add(button);
if((i==2)||(i==6))bar.addSeparator();
return bar;
public void createToolbarActions(){
bold = new StyledEditorKit.BoldAction();
bold.putValue(Action.NAME, "Bold");
italic = new StyledEditorKit.ItalicAction();
italic.putValue(Action.NAME, "Italic");
underline = new StyledEditorKit.UnderlineAction();
underline.putValue(Action.NAME, "Underline");
more = new MoreColorsAction();
cut = getActionByName(DefaultEditorKit.cutAction);
cut.putValue(Action.NAME, "Cut");
copy = getActionByName(DefaultEditorKit.copyAction);
copy.putValue(Action.NAME, "Copy");
paste = getActionByName(DefaultEditorKit.pasteAction);
paste.putValue(Action.NAME, "Paste");
alignleft = new StyledEditorKit.AlignmentAction("Left Justify",StyleConstants.ALIGN_LEFT);
alignright = new StyledEditorKit.AlignmentAction("Right Justify",StyleConstants.ALIGN_RIGHT);
aligncentre = new StyledEditorKit.AlignmentAction("Align Centre",StyleConstants.ALIGN_CENTER);
alignjustify = new StyledEditorKit.AlignmentAction("Fully Justify",StyleConstants.ALIGN_JUSTIFIED);
spellchecker = new StyledEditorKit.AlignmentAction("Spell Checker",StyleConstants.ALIGN_JUSTIFIED);
tools = new Action[]{ cut, copy, paste, bold, italic, underline, more, alignleft, alignright, aligncentre, alignjustify, spellchecker };
// helper methods to enable menu creators to get their actions by name
private void createActionTable(JTextComponent textComponent) {
actions = new Hashtable();
Action[] actionsArray = textComponent.getActions();
for (int i = 0; i < actionsArray.length; i++) {
Action a = actionsArray[i];
actions.put(a.getValue(Action.NAME), a);
private Action getActionByName(String name) {
return (Action)(actions.get(name));
//----------------| Custom Actions |--------------------
class InsertImageAction extends AbstractAction {
protected SimpleTextEditor parent;
public InsertImageAction(SimpleTextEditor parent){
super("Image...");
this.parent=parent;
public void actionPerformed(ActionEvent e) {
int n = parent.picChooser.showOpenDialog(parent);
if(n==0){
String filename=picChooser.getSelectedFile().getName();
File file = new File(picChooser.getCurrentDirectory(),filename);
Icon pic = new ImageIcon(file.getAbsolutePath());
textpane.insertIcon(pic);
SimpleTextEditor.this.repaint();
class InsertDateAction extends AbstractAction {
public InsertDateAction(){
super("Date");
public void actionPerformed(ActionEvent ble) {
Calendar c= Calendar.getInstance();
String[] months= new String[]{"01","02","03","04","05","06","07","08","09","10","11","12"};
textpane.replaceSelection(c.get(c.DAY_OF_MONTH)+"/"+months[c.get(c.MONTH)]+"/"+c.get(c.YEAR));
class InsertLineAction extends AbstractAction {
public InsertLineAction(){
super("Horizontal line");
public void actionPerformed(ActionEvent e) {
Icon pic = new ImageIcon("Images/line.gif");
textpane.insertIcon(pic);
class InsertBulletAction extends AbstractAction {
protected int type;
protected String filenames[] = new String[]{"square.gif","triangle.gif","circle.gif"};
public InsertBulletAction(int type,String name){
super(name);
this.type=type;
this.putValue(SMALL_ICON,new ImageIcon("Images/"+filenames[type]));
public void actionPerformed(ActionEvent e) {
Icon pic = new ImageIcon("Images/"+filenames[type]);
textpane.insertIcon(pic);
textpane.replaceSelection(" ");
class MoreColorsAction extends AbstractAction {
public MoreColorsAction(){
super("More Colors");
public void actionPerformed(ActionEvent e){
AttributeSet as = textpane.getCharacterAttributes();
SimpleAttributeSet sas = new SimpleAttributeSet(as);
Color newColor = JColorChooser.showDialog(
SimpleTextEditor.this,
"C

Here you go guys:
Peace!
import javax.swing.*;
import javax.swing.Timer;
import javax.swing.border.BevelBorder;
import javax.swing.text.*;
import javax.swing.text.rtf.*;
import javax.swing.event.*;
import javax.swing.filechooser.*;
import javax.swing.undo.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import java.beans.*;
-------------------| Simple Text Editor example application using Java 1.3 with Swing |--------------
public class SimpleTextEditor extends JFrame
 private JTextPane textpane;
 private JMenuBar mb;
 private JFileChooser chooser,picChooser;
 private Hashtable actions;
 private JPopupMenu popup;
 private JMenuItem exit, newDoc, save, open, saveAs,print;
 private About ab;
 private StyledEditorKit edkit;
 private RTFEditorKit rtfkit;
 private DefaultStyledDocument doc;
 private MyDocumentListener doclistener;
 private MyUndoableEditListener undolistener;
 //Useful variables
 private String filename = "untitled1.txt",filetype = ".txt";
 private File thisfile;
 protected String FileFormats[],FileDescriptions[],PicFileFormats[],PicFileDescriptions[];
 protected boolean DocumentIsUnedited = true, DocumentIsSaved = false;
 public static int SQUARE = 0,TRIANGLE = 1,CIRCLE = 2;
 public String newline = "\n";
 protected UndoManager undo;
 protected UndoAction undoAction;
 protected RedoAction redoAction;
 // These are the actions used in the menus and on the toolbar
 protected Action bold, italic, underline, alignleft, alignright, aligncentre;
 protected Action spellchecker, alignjustify, more, cut, copy, paste, tools[];
 public SimpleTextEditor()
 super("SimpleTextEditor - untitled1.rtf");
 this.setLocation(200, 200);
 this.setIconImage(getMyIcon("Icon.gif").getImage());
 getContentPane().setLayout(new BorderLayout());
 undo = new UndoManager();
 //Set up the file formats and file choosers etc
 FileFormats = new String[]{".rtf", ".txt", ".java", ".bat"};
 FileDescriptions = new String[]{"Rich Text Format Files", "Text Files", "Java Source Files", "DOS Batch Files"};
 PicFileFormats = new String[]{".gif", ".bmp", ".jpg"};
 PicFileDescriptions = new String[]{"Gif Images", "Bitmap Images", "JPEG Images"};
 chooser = new JFileChooser();
 picChooser = new JFileChooser();
 picChooser.setAccessory(new ImagePreview(picChooser));
 javax.swing.filechooser.FileFilter defaultFilter = new SimpleFilter(FileFormats[0], FileDescriptions[0]);
 javax.swing.filechooser.FileFilter defaultPicFilter = new SimpleFilter(PicFileFormats[0], PicFileDescriptions[0]);
 for (int i = 1; i < FileFormats.length; i++)
 chooser.addChoosableFileFilter(new SimpleFilter(FileFormats, FileDescriptions[i]));
for (int i = 1; i < PicFileFormats.length; i++)
picChooser.addChoosableFileFilter(new SimpleFilter(PicFileFormats[i], PicFileDescriptions[i]));
chooser.setFileFilter(defaultFilter);
picChooser.setFileFilter(defaultPicFilter);
File working = new File("C:/Documents");
if (!working.exists())
working = new File("C:/MyDocuments");
if (!working.exists()) working = new File("C:/");
if (working.exists())
chooser.setCurrentDirectory(working);
picChooser.setCurrentDirectory(working);
// Set up Document object and Editor kits
doc = new DefaultStyledDocument();
edkit = new StyledEditorKit();
rtfkit = new RTFEditorKit();
// Set up Listener objects
doclistener = new MyDocumentListener();
undolistener = new MyUndoableEditListener();
doc.addDocumentListener(doclistener);
doc.addUndoableEditListener(undolistener);
//Set up main GUI content
textpane = new JTextPane(doc);
textpane.setPreferredSize(new Dimension(400, 400));
textpane.setMinimumSize(new Dimension(400, 400));
JScrollPane scroller = new JScrollPane(textpane);
scroller.setPreferredSize(new Dimension(400, 400));
mb = new JMenuBar(); // Create a menu bar
JMenu File = new JMenu("File");
JMenu Help = new JMenu("Help");
//Sort out Actions etc
createActionTable(textpane);
createToolbarActions();
JMenu Style = createStyleMenu();
undoAction = new UndoAction();
redoAction = new RedoAction();
//Create Style, Edit and Format menus + Toolbar
JMenu Edit = createEditMenu();
JMenu Format = createFormatMenu();
JMenu Insert = createInsertMenu();
JToolBar toolbar = createToolbar();
getContentPane().add("North", toolbar);
// set up main menu items with ActionListeners
newDoc = new JMenuItem("New");
newDoc.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
newDoc();
exit = new JMenuItem("Exit");
exit.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
exit();
print = new JMenuItem("Print");
print.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
print();
save = new JMenuItem("Save");
save.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
save();
saveAs = new JMenuItem("Save As...");
saveAs.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
saveas();
open = new JMenuItem("Open...");
open.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
open();
JMenuItem about = new JMenuItem("About");
about.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
ab = new About(SimpleTextEditor.this);
ab.show();
ab.setLocation(400, 300);
// Create the popup menu
popup = createEditMenu().getPopupMenu();
popup.addSeparator();
popup.add(createStyleMenu());
popup.add(createFormatMenu());
textpane.add(popup);
// set up Help and File menus
Help.add(about);
File.add(newDoc);
File.add(open);
File.add(print);
File.add(save);
File.add(saveAs);
File.addSeparator();
File.add(exit);
// add the menus to the menubar
mb.add(File);
mb.add(Edit);
mb.add(Format);
mb.add(Style);
mb.add(Insert);
mb.add(Help);
this.setJMenuBar(mb);
getContentPane().add("Center", scroller);
// Add mouse Listener to the textpane for popup events
textpane.addMouseListener(new MouseAdapter()
public void mousePressed(MouseEvent e)
if (e.isPopupTrigger())
popup.show(textpane, e.getX(), e.getY());
e.consume();
public void mouseReleased(MouseEvent e)
if (e.isPopupTrigger())
popup.show(textpane, e.getX(), e.getY());
e.consume();
//-----------------| Main active methods |------------------
public void exit()// Main Exit method
if (DocumentIsUnedited)
{//Check that document is saved/unedited etc
dispose();
setVisible(false);
System.exit(0);
else
switch (showNotSavedDialog("Exit"))
case JOptionPane.YES_OPTION:
save();
exit();
break;
case JOptionPane.NO_OPTION:
DocumentIsUnedited = true;
exit();
break;
case JOptionPane.CANCEL_OPTION:
break;
public void newDoc()//Method to create new documents
if (DocumentIsUnedited)
initDoc();
filename = "untitled.txt";
filetype = ".txt";
resetTitle();
else
switch (showNotSavedDialog("New Document"))
case JOptionPane.YES_OPTION:
save();
newDoc();
break;
case JOptionPane.NO_OPTION:
DocumentIsUnedited = true;
newDoc();
break;
case JOptionPane.CANCEL_OPTION:
break;
private void initDoc()// Helper method to initialize a new document
doc = null;
doc = (DefaultStyledDocument) edkit.createDefaultDocument();
doc.addDocumentListener(doclistener);
textpane.setStyledDocument(doc);
public void print()
new TimerTestDialog(this);
class TimerTestDialog extends JDialog
TimerTestDialog(Frame parent)
super(parent);
setLocationRelativeTo(parent);
setupDialog();
setModal(false); // this will allow you to do still stuff with the main frame
* sorry, using a Timer instead of your original TimerTask - it's simpler
Timer t = new Timer(2000, ticker);
t.start();
private void setupDialog()
Container c = getContentPane();
c.setLayout(new BorderLayout());
c.add(getDisplayPanel(), BorderLayout.CENTER);
c.add(getButtonPanel(), BorderLayout.SOUTH);
setSize(300, 150);
setVisible(true);
private Component getDisplayPanel()
label = new JLabel("---", JLabel.CENTER);
label.setBorder(BorderFactory.createBevelBorder(BevelBorder.LOWERED));
JPanel panel = new JPanel(new BorderLayout());
panel.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
JPanel backing = new JPanel(new BorderLayout());
backing.add(label, BorderLayout.NORTH); // this will ensure the label doesn't go all tall
panel.add(backing, BorderLayout.CENTER);
return panel;
private Component getButtonPanel()
JPanel panel = new JPanel(new BorderLayout());
panel.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
JPanel backing = new JPanel(new BorderLayout());
JButton closeButton = new JButton("close");
closeButton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
dispose();
backing.add(closeButton, BorderLayout.NORTH);
panel.add(backing, BorderLayout.EAST);
return panel;
private ActionListener ticker = new ActionListener()
public void actionPerformed(ActionEvent e)
label.setText(String.valueOf(getRandomNumber()));
private int getRandomNumber()
return r.nextInt(10) + 1; // shift from 0-9 to 1-10
private JLabel label;
* NOTE - this is the best way to use random stuff in java. if you use instance members
* you can sometimes get the same result each time. not really sure how that works but
* i've seen it happen
private static Random r = new Random();
public void saveas()
int n = chooser.showSaveDialog(this);
if (n == 0)
filename = chooser.getSelectedFile().getName();
boolean ext = false;
setFiletype();
thisfile = new File(chooser.getCurrentDirectory(), filename);
DocumentIsSaved = true;
save();
resetTitle();
repaint();
public void save()// Save method. Used by "Save As..." as well
if (DocumentIsSaved)
try
FileOutputStream out = new FileOutputStream(thisfile);
if ((filetype.equals(".rtf")) || (filetype.equals(".doc")))
rtfkit.write(out, doc, 0, doc.getLength());
else
edkit.write(out, doc, 0, doc.getLength());
catch (Exception e)
System.out.println("" + e.getMessage() + "");
DocumentIsUnedited = true;
else
saveas();
public void open()// Find a file and read it into the document
if (DocumentIsUnedited)
int n = chooser.showOpenDialog(this); // get the outcome of the dialog
if (n == 0)
File file = chooser.getSelectedFile();
filename = chooser.getName(file);
setFiletype();
resetTitle();
initDoc();
try
FileInputStream in = new FileInputStream(file);
if (filetype.equals(".rtf"))
rtfkit.read(in, doc, 0);
edkit.read(in, doc, 0);
catch (Exception e)
System.out.println("" + e.getMessage() + "");
thisfile = new File(chooser.getCurrentDirectory(), chooser.getSelectedFile().getName());
DocumentIsUnedited = true;
DocumentIsSaved = true;
resetTitle();
repaint();
else
switch (showNotSavedDialog("Open"))
case JOptionPane.YES_OPTION:
save();
open();
break;
case JOptionPane.NO_OPTION:
DocumentIsUnedited = true;
open();
break;
case JOptionPane.CANCEL_OPTION:
break;
private void setFiletype()// Helper method to get the filetype of saved/opened documents
filetype = null;
for (int i = 0; i < FileFormats.length; i++)
if (filename.toLowerCase().endsWith(FileFormats[i]))
filetype = FileFormats[i];
else
for (i = 0; i < filename.length(); i++)
if (filename.toLowerCase().charAt(i) == '.')
filetype = filename.substring(i);
if (filetype == null) filetype = ".txt";
private void resetTitle()
this.setTitle("SimpleTextEditor - " + filename);
private ImageIcon getMyIcon(String filename)
ImageIcon pic = new ImageIcon("Images/" + filename);
return pic;
private int showNotSavedDialog(String title)// Helper method to create "Save? Yes/No/Cancel" dialogs
int n = JOptionPane.showConfirmDialog(this, "The last document has not been saved. \nDo you want to save it first?",
title,
JOptionPane.YES_NO_CANCEL_OPTION,
JOptionPane.QUESTION_MESSAGE);
return n;
//-----------------| Listeners and Helper classes |----------------
protected class MyDocumentListener implements DocumentListener
public void insertUpdate(DocumentEvent e)
SimpleTextEditor.this.DocumentIsUnedited = false;
public void removeUpdate(DocumentEvent e)
SimpleTextEditor.this.DocumentIsUnedited = false;
public void changedUpdate(DocumentEvent e)
SimpleTextEditor.this.DocumentIsUnedited = false;
protected class MyUndoableEditListener implements UndoableEditListener
public void undoableEditHappened(UndoableEditEvent e)
//Remember the edit and update the menus.
undo.addEdit(e.getEdit());
undoAction.updateUndoState();
redoAction.updateRedoState();
//Helper class for FileFilter, allows a description to be assigned to a filetype
protected class SimpleFilter extends javax.swing.filechooser.FileFilter
String type,des;
public SimpleFilter(String type, String des)
this.des = des;
this.type = type;
public boolean accept(File f)
if (f.isDirectory())
return true;
else
if (f.getName().toLowerCase().endsWith(type))
return true;
else
return false;
public String getDescription()
return des;
//------------| Methods to help create menus and toolbar |--------------
protected JMenu createStyleMenu()
JMenu menu = new JMenu("Style");
menu.add(bold);
menu.add(italic);
menu.add(underline);
menu.addSeparator();
menu.add(new StyledEditorKit.FontSizeAction("12", 12));
menu.add(new StyledEditorKit.FontSizeAction("14", 14));
menu.add(new StyledEditorKit.FontSizeAction("18", 18));
menu.addSeparator();
menu.add(new StyledEditorKit.FontFamilyAction("Serif", "Serif"));
menu.add(new StyledEditorKit.FontFamilyAction("SansSerif", "SansSerif"));
menu.addSeparator();
Action red = new StyledEditorKit.ForegroundAction("Red", new Color(255, 0, 0));
red.putValue(Action.SMALL_ICON, getMyIcon("red.gif"));
menu.add(red);
Action green = new StyledEditorKit.ForegroundAction("Green", new Color(0, 150, 0));
green.putValue(Action.SMALL_ICON, getMyIcon("green.gif"));
menu.add(green);
Action blue = new StyledEditorKit.ForegroundAction("Blue", new Color(0, 50, 150));
blue.putValue(Action.SMALL_ICON, getMyIcon("blue.gif"));
menu.add(blue);
Action black = new StyledEditorKit.ForegroundAction("Black", new Color(0, 0, 0));
black.putValue(Action.SMALL_ICON, getMyIcon("black.gif"));
menu.add(black);
menu.add(more);
return menu;
protected JMenu createEditMenu()
JMenu menu = new JMenu("Edit");
menu.add(undoAction);
menu.add(redoAction);
menu.addSeparator();
menu.add(cut);
menu.add(copy);
menu.add(paste);
menu.addSeparator();
Action selectall = getActionByName(DefaultEditorKit.selectAllAction);
selectall.putValue(Action.NAME, "Select All");
menu.add(selectall);
return menu;
protected JMenu createFormatMenu()
JMenu menu = new JMenu("Format");
menu.add(spellchecker);
menu.add(alignleft);
menu.add(alignright);
menu.add(aligncentre);
menu.add(alignjustify);
return menu;
protected JMenu createInsertMenu()
JMenu menu = new JMenu("Insert");
Action insertimage = new InsertImageAction(this);
menu.add(insertimage);
Action insertdate = new InsertDateAction();
menu.add(insertdate);
Action insertline = new InsertLineAction();
menu.add(insertline);
JMenu bullets = new JMenu("Bullet Points");
bullets.add(new InsertBulletAction(CIRCLE, "Circle"));
bullets.add(new InsertBulletAction(TRIANGLE, "Triangle"));
bullets.add(new InsertBulletAction(SQUARE, "Square"));
menu.add(bullets);
return menu;
public JToolBar createToolbar()
JToolBar bar = new JToolBar();
JButton newbutton = new JButton(getMyIcon("new.gif"));
newbutton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
newDoc();
bar.add(newbutton);
JButton savebutton = new JButton(getMyIcon("save.gif"));
savebutton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
save();
bar.add(savebutton);
JButton openbutton = new JButton(getMyIcon("open.gif"));
openbutton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
open();
bar.add(openbutton);
bar.addSeparator();
for (int i = 0; i < tools.length; i++)
JButton button = new JButton();
button.setAction(tools[i]);
button.setIcon(getMyIcon(tools[i].getValue(Action.NAME) + ".gif"));
button.setText("");
bar.add(button);
if ((i == 2) || (i == 6)) bar.addSeparator();
return bar;
public void createToolbarActions()
bold = new StyledEditorKit.BoldAction();
bold.putValue(Action.NAME, "Bold");
italic = new StyledEditorKit.ItalicAction();
italic.putValue(Action.NAME, "Italic");
underline = new StyledEditorKit.UnderlineAction();
underline.putValue(Action.NAME, "Underline");
more = new MoreColorsAction();
cut = getActionByName(DefaultEditorKit.cutAction);
cut.putValue(Action.NAME, "Cut");
copy = getActionByName(DefaultEditorKit.copyAction);
copy.putValue(Action.NAME, "Copy");
paste = getActionByName(DefaultEditorKit.pasteAction);
paste.putValue(Action.NAME, "Paste");
alignleft = new StyledEditorKit.AlignmentAction("Left Justify", StyleConstants.ALIGN_LEFT);
alignright = new StyledEditorKit.AlignmentAction("Right Justify", StyleConstants.ALIGN_RIGHT);
aligncentre = new StyledEditorKit.AlignmentAction("Align Centre", StyleConstants.ALIGN_CENTER);
alignjustify = new StyledEditorKit.AlignmentAction("Fully Justify", StyleConstants.ALIGN_JUSTIFIED);
spellchecker = new StyledEditorKit.AlignmentAction("Spell Checker", StyleConstants.ALIGN_JUSTIFIED);
tools = new Action[]{cut, copy, paste, bold, italic, underline, more, alignleft, alignright, aligncentre, alignjustify, spellchecker};
// helper methods to enable menu creators to get their actions by name
private void createActionTable(JTextComponent textComponent)
actions = new Hashtable();
Action[] actionsArray = textComponent.getActions();
for (int i = 0; i < actionsArray.length; i++)
Action a = actionsArray[i];
actions.put(a.getValue(Action.NAME), a);
private Action getActionByName(String name)
return (Action) (actions.get(name));
//----------------| Custom Actions |--------------------
class InsertImageAction extends AbstractAction
protected SimpleTextEditor parent;
public InsertImageAction(SimpleTextEditor parent)
super("Image...");
this.parent = parent;
public void actionPerformed(ActionEvent e)
int n = parent.picChooser.showOpenDialog(parent);
if (n == 0)
String filename = picChooser.getSelectedFile().getName();
File file = new File(picChooser.getCurrentDirectory(), filename);
Icon pic = new ImageIcon(file.getAbsolutePath());
textpane.insertIcon(pic);
SimpleTextEditor.this.repaint();
class InsertDateAction extends AbstractAction
public InsertDateAction()
super("Date");
public void actionPerformed(ActionEvent ble)
Calendar c = Calendar.getInstance();
String[] months = new String[]{"01", "02", "03", "04", "05", "06", "07", "08", "09", "10", "11", "12"};
textpane.replaceSelection(c.get(c.DAY_OF_MONTH) + "/" + months[c.get(c.MONTH)] + "/" + c.get(c.YEAR));
class InsertLineAction extends AbstractAction
public InsertLineAction()
super("Horizontal line");
public void actionPerformed(ActionEvent e)
Icon pic = new ImageIcon("Images/line.gif");
textpane.insertIcon(pic);
class InsertBulletAction extends AbstractAction
protected int type;
protected String filenames[] = new String[]{"square.gif", "triangle.gif", "circle.gif"};
public InsertBulletAction(int type, String name)
super(name);
this.type = type;
this.putValue(SMALL_ICON, new ImageIcon("Images/" + filenames[type]));
public void actionPerformed(ActionEvent e)
Icon pic = new ImageIcon("Images/" + filenames[type]);
textpane.insertIcon(pic);
textpane.replaceSelection(" ");
class MoreColorsAction extends AbstractAction
public MoreColorsAction()
super("More Colors");
public void actionPerformed(ActionEvent e)
AttributeSet as = textpane.getCharacterAttributes();
SimpleAttributeSet sas = new SimpleAttributeSet(as);
Color newColor = JColorChooser.showDialog(
SimpleTextEditor.this,
"Choose Text Color",
doc.getForeground(as));
if (newColor != null)
StyleConstants.setForeground(sas, newColor);
textpane.setCharacterAttributes(sas, true);
SimpleTextEditor.this.repaint();
class UndoAction extends AbstractAction
public UndoAction()
super("Undo");
setEnabled(false);
public void actionPerformed(ActionEvent e)
try
undo.undo();
catch (CannotUndoException ex)
System.out.println("Unable to undo: " + ex);
ex.printStackTrace();
updateUndoState();
redoAction.updateRedoState();
protected void updateUndoState()
if (undo.canUndo())
setEnabled(true);
putValue(Action.NAME, undo.getUndoPresentationName());
else
setEnabled(false);
putValue(Action.NAME, "Undo");
class RedoAction extends AbstractAction
public RedoAction()
super("Redo");
setEnabled(false);
public void actionPerformed(ActionEvent e)
try
undo.redo();
catch (CannotRedoException ex)
System.out.println("Unable to redo: " + ex);
ex.printStackTrace();
updateRedoState();
undoAction.updateUndoState();
protected void updateRedoState()
if (undo.canRedo())
setEnabled(true);
putValue(Action.NAME, undo.getRedoPresentationName());
else
setEnabled(false);
putValue(Action.NAME, "Redo");
//-------------| Very nice Image Previewer 'borrowed' from Sun's Java Tutorial
class ImagePreview extends JComponent implements PropertyChangeListener
ImageIcon thumbnail = null;
File file = null;
public ImagePreview(JFileChooser fc)
setPreferredSize(new Dimension(100, 50));
fc.addPropertyChangeListener(this);
public void loadImage()
if (file == null)
return;
ImageIcon tmpIcon = new ImageIcon(file.getPath());
if (tmpIcon.getIconWidth() > 90)
thumbnail = new ImageIcon(tmpIcon.getImage().getScaledInstance(90, -1,
Image.SCALE_DEFAULT));
else
thumbnail = tmpIcon;

Can a rollover go to a different frame number...

Can a rollover go to a different frame number...

ohh sorry
on button 1 frame 10 i put this AS
feedURL = "
http://61.16.10.25/_flash/Delhi.aspx";
// include the script to grab the XML data and import it into
the flash movie
#include "scripts/content.as"
// fire event to display current weather conditions
dispatchEvent({type:"containerInit", target:this});
// when button is pressed, shift it's position
function btnPressed(btn) {
btn._x += 1;
btn._y += 1;
// when button is released, put it back
function btnReleased(btn) {
btn._x -= 1;
btn._y -= 1;
and on button 2 frame 10 i put the
feedURL = "
http://61.16.10.25/_flash/Sanjose.aspx";
// include the script to grab the XML data and import it into
the flash movie
#include "scripts/content.as"
// fire event to display current weather conditions
dispatchEvent({type:"containerInit", target:this});
// when button is pressed, shift it's position
function btnPressed(btn) {
btn._x += 1;
btn._y += 1;
// when button is released, put it back
function btnReleased(btn) {
btn._x -= 1;
btn._y -= 1;
i want if i roll over it shows its own AS only not the other
buttons AS
kindly tell me where i can send u the file to see the
problem

Duplicate entry posted in FB60 with different referance number

how to find out duplicate entry posted in fb60 with different reference number in same vendor.

Dear,
the question is not so clear; try by se11 --> BSEG table using Your vendor and other details...
I hope this helps.
Mauri

Make a number in column A always return a different specific number in column B

I'm trying to create a retirement calculator.
How do I set it up so that no matter where a specific number appears in column A, column B, same row, always returns a different specific number.
This second number cannot be derived from the first mathematically.
example:
Column A your current age is entered in the first cell.
Column B is the Life Expectency Factor (LEF). Before age 70 it is 0. At age 70 that number is 24.7, at 71 it is 26.4 etc.
Column C returns the Minimum Required Distribution (How much one has to withdraw) (B * $IRA = $MinDist)
Depending on the age in the first cell of column A, age 70 could be in any row.
How can I have the LEF in column B move with the age so that no matter in which row age 70 may appear in column A, that row in column B always returns 24.7 and age 71 always returns 26.4... and on.
No matter which row 70 is in, 24.7 is always next to it in the same row. This will go from 70 to 100 each with a specific LEF next to it.
Thanks

Hi Les,
Setup a Lookup table listing the LEF in column B beside each age in column A. Assuming one header row, start with 0 and 0 in A2 and B2, 70 and 24.7 in A3 and B3, etc.
On your Main table, enter the formula below in the first data cell of Main::column B (B2, again assuming a single header row for labels). Fill the formula down to the end of the table.
Main::B2: =LOOKUP(A,Lookup::$A,Lookup::$B)
Fill the formula to the end of column B
Numbers on the lookup table on the right are from the (US) government Social Security Administration Actuarial Life Table, and may not (do not, for the two examples in your post) agree with those you are using.
Regards,
Barry

Different RM Number in My N97

Similar Messages

Maybe you are looking for